can anybody tell me how to setup remote desktop from HTC to my PC (I am using Windows 7)
Step by step please guys
http://www.youtube.com/watch?v=iCs4GQma7IQ
With that guide I made it work, good luck.
I did exactly everything in this guide and even set a corresponding exception in the Windows firewall (also tried with Windows firewall off) - but the mobile remote desktop program always tells me there was an internal error... But what the heck could that be?
Dont bother the remote dt program is ****e, im currently using vnc which is a bit better, but rather lacking also.
Is it me or did that video not mention setting up your windows machine to allow connections.
Make sure remote desktop is enabled on your PC and make sure it is allowing connections from computers running any version of Remote desktop(2nd option) third option works between windows 7 machines but wouldn't allow my phone to connect.
Your error sounds like it is being caused by something on the phone end though so i dont know if that will help.
Those with remote desktop working can you get it to go landscape? Mine works fine except i can't get landscape mode. Also anyone know of a app that can send wake up requests to a machine? I have this on my laptop so i can wake my pc over the internet and then log in. Anything similar out there for win mobile?
allowing a connection through windows firewall alone is not helping, if you have other system securtiy programs that also has a firewall. or maybe your router has a firewall too. you should try and forward the right port (3389) in the software of your router.
I opened port 3389 on the router, I activated the correct remote desktop option on the PC (Vista), the IP is right (wrong IP adress throws a different error, so the program gets that far)...
I guess you have Windows 7 Home version
Have you tried using 16 bit high colour option? Mine said it couldn't connect when i turned it down to 256 colours.
Edit: Windows 7 x64 btw
OK on my windows7 x64 ive turned on remote desktop and set it to allow connections (2nd option) and i still cant connect, what do i type in user/pass on the hd2
-ive setup the portforwarding on my bethere box
-tryed both color modes on hd2
does it have to be over wifi or can it be over 3g?
Your user name and password for windows.
You MUST have a password set up on your windows account to be able to use remote desktop. If you don't have a password set up remote desktop and other network related access will not work. I.e using the phone to access shared windows folders.
bzdemes said:
Your user name and password for windows.
You MUST have a password set up on your windows account to be able to use remote desktop. If you don't have a password set up remote desktop and other network related access will not work. I.e using the phone to access shared windows folders.
Click to expand...
Click to collapse
ok ive added a password to my pc but still wont work, i think i tmay be something todo with this steps
2. Open a web browser, and type 192.168.1.1 to access your router. If you don't know the default username and password (usually admin/password), Google for it.
3. Enter port forwarding. Add a new entry using your local IP address, and the start/end port of 3389.
Click to expand...
Click to collapse
my router is a THOMSON TG585v7 and to log into it i need to type http://192.168.1.254 so i did and the only thing like port forwarding i can find is the Toolbox\Game & Application Sharing menu and in their i can type the ports but cant type the local IP address as their no where to add it, ive added a pic that might help you help me
If you are accessing the machine via your wifi(i.e your own network) you should be able to do it without any port forwarding.
So punch in your machines local IP and your username and password. That should work(make sure it is using your WiFi and not still connecting via 3G). If you wanted to be able to do it via 3G/wifi(external network) then you will need to get port forwarding working.
Edit: Port forwarding guide for you. I think this is roughly the same version of router you have just different branding.
http://www.portforward.com/english/...mson-Alcatel/SpeedTouch585/Remote_Desktop.htm
bzdemes said:
If you are accessing the machine via your wifi(i.e your own network) you should be able to do it without any port forwarding.
So punch in your machines local IP and your username and password. That should work(make sure it is using your WiFi and not still connecting via 3G). If you wanted to be able to do it via 3G/wifi(external network) then you will need to get port forwarding working.
Edit: Port forwarding guide for you. I think this is roughly the same version of router you have just different branding.
http://www.portforward.com/english/...mson-Alcatel/SpeedTouch585/Remote_Desktop.htm
Click to expand...
Click to collapse
so in the last part of the setup i need to manually define it as the local ip, still not working if that's what i should do
The last step is applying the forwarding to your PC. So you should be able to pick your PCs name in the drop down box.
Have you tried just doing it over your local wireless network(forget about port forwarding for a minute.) Enter the local IP(could also just try entering the name of the PC though im not sure if that works) of your PC as the computer then your user name and password.
Related
Ok i know i already saw the answer of this somewhere but i already looked for it and i just cant find it.
I have a athena and i would like to remotely connect to my pc that is on my office and use it remotely, i know there are programs to do this i just cant get the right words to find them.
can anyone help me out on this?
thankx
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
irus said:
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
Click to expand...
Click to collapse
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
apd said:
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
Click to expand...
Click to collapse
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
ltxda said:
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
Click to expand...
Click to collapse
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
leoni1980 said:
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
Click to expand...
Click to collapse
Of course, this only applies if you are not behind a corporate firewall using NAT or other dynamic IP behind the firewall. Also, if it is a corporate network, opening port 3389 may be (a) very difficult to convince your IT dept to do and (b) not very secure!
If one iof the dynamic dns systems works for you, you might try dyndns.org
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
homiedaclown said:
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
Click to expand...
Click to collapse
a few thoughts,
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
2. do you have a password setup on the user account that you log into windows on if no remote desktop will not allow access.
3. when browsing from a 3rd party network ( e.g mcdonalds or over GPRS/HSDPA ) you browse to your external ip not the dark ip of 192.168.1.x i use dyndns.org so i can just browse to the dynamic domain ip which is my external ip of my home pc
4. since you mentioned a dark ip i can only also assume your using a router at home. this means you either use such as LogmeIn/Hamachi and browse to the home pc's Hamachi IP ( e.g 5.5.100.50 ) or you will have to set a port forward in your router to forward any requests from port 3389 to the local IP of the home pc, ( e.g 192.168.1.100 )
I use static ip's in my router at home to ensire that the port forward will always goto my home pc's internal ip address. My particular router from netgear allows to have the ip of a specific machine be assigned the same ip internally based on it's ethernet adapter MAC address. making no changes required on the pc itself other them standard DHCP.
hope this helps.
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
1. I am using Windows XP Home. I have allowed Remote Access under the tab Systems Tab.
2. I only have a pw on the prog VNC server on the pc but no passwords for windows *should I? :| ... Then I try VNC Viewer the the Pocket PC *T-mobile Wing.
3. I am reading up on the dyndns.org site. I assume I need the free dns service for those with dynamic IP addresses. *i hope I have that.
4. I have Linksys Bef11s4... I believe I can set static ip's though its tricky for me. I am going to try for the pc I want to connect to. This networking stuff gets a little bit blurry for me. I understand that static means non-changing, therefore the pc to connect to in network will have same ip on restarts and things. I am familiar with the port forwarding options *do i need tcp and udp checked?... again any thoughts definately appreciated...
lastly, Do you have any particular progs you recommend for me to do this concept? I have a few installed, but not sure i need all.. I have pocketputty on pda and wm6 rdc... plus vncvier. On the PC i have VNC CLient and VNC Server *believe I only need server. Thank you for your time Cyberjak
1. Just go to http://www.logmein.com
2. Sign up. It's free.
3. Screw Remote Desktop and juggling internal vs. external IP addresses and DNS.
4. Use/enjoy...no work needed.
MJB
Logmein has like 6 choices... I am looking to remote access outside my network... also is this free? I see trials and stuff... thanks for help mjb
have the logme in installed on main and when i use pda it doesnt work...i installed cab and log in fine but when i go to remote the pc it takes my access code and then pops up with error message for menuPDA.html... i cleared history and cookies and tried to make sense of the forums... I am using the T-mobile Wing with WM6.... wierd... willing to try the other way if needed... i guess i could also try loggin thru a pc not home to the remote pc... i believe i saying this remote term correctly but i believe u understand. I am trying to use my PDA anywhere to control home pc.... thanks for help guys... i am willing to try whatever way works...
I've used Logmein on my MDA Pro, Ameo and now on my Vario 3.
You should first try to remote your PC while your sitting next to it. That way you can see any firewall pop ups that may be blocking you.
I have been trying when i am right next to it... I am using my WM6 to connect wi-fi to the internet thru my network.... the pc i wanna control is on my network...
It doesn't matter what network the PDA and PC are on. Logmein uses an internet connection.
yeah, tried a bunch of things to get logmein to work, and it always comes to the page of "403 Forbidden (0x5) menuPDA.html System error: Access is denied. (5)"
checked their forrums too...
guessing i should try going back to client/server manual entry... either way, any advice from you guys much appreciated.... It seems WM6 are known for incompatibility issues with RDC situations.... hoping not the case but...thanks again guys
got logmein working nicely, thank you for the help guys...
Gooer Remote Desktop Service
I am using Gooer Remote Desktop Service(http://www.gooer.com) and it let me access my home PC using laptop or mobile phone.
remote desktop only works, as far as I know, on XP pro & Vista
http://forum.xda-developers.com/showthread.php?t=357009
can anyone give me a step by step guide on how to configure the remote desktop? btw i am using windows 7
On the Phone in Remote desktop mobile :-
In the box Computer put your pc's IP address
In the box User put the pc's users registered name (not the computers name) ie the name you use when you log on to your pc guest user etc.
In the box password put in your pc login password
In the box Domain put the full computer name found under my computer properties.
On your pc under my computer properties - remote - tick allow remote access
You should be ok to go - make sure your phone has a data/internet setting enabled and is active.
r
Andrew
Oh and don't forget to adjust your firewall settings to allow your HD access
bigdish said:
On the Phone in Remote desktop mobile :-
In the box Computer put your pc's IP address
In the box User put the pc's users registered name (not the computers name) ie the name you use when you log on to your pc guest user etc.
In the box password put in your pc login password
In the box Domain put the full computer name found under my computer properties.
On your pc under my computer properties - remote - tick allow remote access
You should be ok to go - make sure your phone has a data/internet setting enabled and is active.
r
Andrew
Oh and don't forget to adjust your firewall settings to allow your HD access
Click to expand...
Click to collapse
thank you very much, it funny how you give the simplest instructions and it all works in one go and the rest are so complicated etc haha thanks man
ah there always has to be a problem, 1) i cant see the keyboard even witout full screen. 2) when i try to login i get an error "Logon failure: user account restriction. Possible reasons are blank passwords not allowed. Logon hour restrictions, or a policy restriction has been enforced" HELP!!
I had the keyboard problem too.
I use finger keyboard and in the display option of Remote Desktop I ticked "Fit to remote desktop" Be careful it allows you to tick the other box as well.
Also colours = High Color.
As to the other messages it must be a Windows 7 issue of more parameters having to be entered.Also I log off on my pc before I connect.
Hope this helps
r
Andrew
bigdish said:
I had the keyboard problem too.
I use finger keyboard and in the display option of Remote Desktop I ticked "Fit to remote desktop" Be careful it allows you to tick the other box as well.
Also colours = High Color.
As to the other messages it must be a Windows 7 issue of more parameters having to be entered.Also I log off on my pc before I connect.
Hope this helps
r
Andrew
Click to expand...
Click to collapse
thank you, it worked
im on windows 7 and i di everything stated above, even disabled my firewall, but it still wont connect!! grrr, any more tips!
hi followed the guide exact and im stuck at the log in, i put the right pastword in and it keeps saying wrong password. Im running windows 7 ultimate any advice
thnx bro it works perfect in win 7 ultimate!!!
It works
It works just as stated! It seems the full computer name that is entered in the domain section is entered without spaces. after doing it like this it works with even gprs/edge. Thanks to bigdish!
I require some assistance here. My PC connects to the Internet through a router (Siemens SE572) and I had to set up a static IP and now trying to configure the port forwarding feature on my router (UDP, 3389). I'm not sure I'm doing it correctly. Any ideas?
hi still not able to to get past my login. all my details are entered exact once its connects it goes to my pc's login page and thats as far as i get just will not let me log in. Anyone having the same problem.
Im using windows 7 ultimate
Avg 9 antivirus/firewall
Bt home hub
guys plz give me some help.
i do all the above but i get an error message.
"the computer is not set for remote access".etc
i put my ip on computer but i think u have to open a port,so i write for exaple: 192.165.1.2:1411 (?). i also tryed without the port and also with my local ip.
user: ??? (i m the admin) so i put the name the windows asked me.
pass: i got no pass so i leave it blank?
domain: i put the computer name.
i also did the settings on the pc mentioned above and turned the firewall off.
any ideas???
port forwarding
User X said:
I require some assistance here. My PC connects to the Internet through a router (Siemens SE572) and I had to set up a static IP and now trying to configure the port forwarding feature on my router (UDP, 3389). I'm not sure I'm doing it correctly. Any ideas?
Click to expand...
Click to collapse
.................
you must have password, thats why u cannot conne`t
Been trying for nearly 20hours in total. when i tried to connect it stated as connect but after 2-3 sec it became disconnect again. no error nor anything.
I am on window xp version 2002 SP3
connect via wifi
1. I had enabled/ticked remote desktop in properties from my computer tab.
2. Got ip address for computer name from start/run/cmd/ipconfig, ip start with 192.168.xxx.xxx.
3. User name to enter in my htc hd2 from ''my computer/propeties/computer name/Full computer name
4. Set password for my user account on my xp
5. Opened port for remote desktop port 3389 in my 2wire
6. I disabled firewall on my Win Xp.
7. this is what i entered on my Leo remote desktop
Computer Name : Ip address (192.168.xxx.xxx)
User name : My Win Xp account name
Password: My Windows logon pass
Domain :
Any help there will be much appreciated. getting bonker over this.
Same probleme here , I thought I was the only one
i am going nuts soon! ARGH!
when you choose to allow remote desktop connections, make sure you use the
"allow connections from computers running any version of remote desktop (less secure)" otherwise it wont connect.
Window xp only have 1 option to choose from .
Remote Desktop : Allow user to connect remotely to this computer.
First try to connect from other normal computer.
did you open wifi in hd2?
yes i enabled wifi .
@@ dr.sid. i only have 1 Pc.
if you guys are behind routers, make sure you have the right port forwarding set up and check the ip address of your comp from the router. Also, make sure you're connected to router via wifi on you phone
hi svegetto. appreciated for your reply and help. but i had already done what you stated in my 1st post. but the problem still occur
.hide said:
hi svegetto. appreciated for your reply and help. but i had already done what you stated in my 1st post. but the problem still occur
Click to expand...
Click to collapse
This is all out of memory, so I appologize if i'm wrong, but don't you need to also add port forwarding for port 80?
tried forwarded port 80 does not work too.
Tried it today, but it's not working for me either :/
I've gotten it to work before so I don't know what's going on...
I know that I use the correct ip and username + password
try this
Enter the domain name as the full computer name with no spaces as well as user name/ip (public or local).
In comm manager go to set up data connection and select adavanced tab.
under connections select 'select networks'.
Then select the edit tab on the my work network, followed by the proxy tab on the bottom. Then tick box ''this network connects to the internet''.
press ok and then try and connect. This works a treat on 3g. have not tried on wifi but i guess its the same.
wan ip not lan
onebyside said:
wan ip not lan
Click to expand...
Click to collapse
nope...still not working
dannyboyp said:
Enter the domain name as the full computer name with no spaces as well as user name/ip (public or local).
In comm manager go to set up data connection and select adavanced tab.
under connections select 'select networks'.
Then select the edit tab on the my work network, followed by the proxy tab on the bottom. Then tick box ''this network connects to the internet''.
press ok and then try and connect. This works a treat on 3g. have not tried on wifi but i guess its the same.
Click to expand...
Click to collapse
tried it now...does not work for me
is ur windows xp home edition? because if it is it does not allow u to host remote desktop but using it to access other computers is ok
lengjai said:
is ur windows xp home edition? because if it is it does not allow u to host remote desktop but using it to access other computers is ok
Click to expand...
Click to collapse
I have Windows 7 and It's set to allow remote desktop
I honestly don't know what I'm doing. All I know is that all the things I've tried so far didnt work.
Can someone guide me on how to set this up on my NookColor?
My PC and NookColor share the same wifi connection via an Airport Exteme router. I know that there are two IP Address: one form y router, which I can see on www.whatismyip.com and the other is my computer's which I can see via cmd > ipconfig. So, my question is-- how do I set this thing up? Any step by step procedure?
What have you already tried? Also what version of OS are you using, some versions of windows have RDP kneecapped. Also, where are you trying to view it from?
If you already have RDP going, you can use Wyse PocketCloud to manage the connections through your google account, it's pretty straight-forward.
Personally, I use TightVNC as the desktop client and AndroidVNC Viewer and ConnectBot on the nook. I only use my home computer when at home, so the setup is fairly simple, have AndroidVNC talk to myipaddress using port 5900. Be sure to use the connecting password when you set up TightVNC - also check the character count as you enter it, sometimes it doesn't take all the characters, ie; the password "bob-ismyuncle" is stored as "bob-ismy".
For connections remotely (not on the same network) I first SSH into the machine with ConnectBot, then set up a port forward to localhost:5901 which AndroidVNC then connects to.
Also, has anyone tried NX?
I'll assume you're a windows user?
Make sure RDP is enabled on your PC (google it, really easy to enable)
If BOTH machines are connected to your network... get the PC's IP address (via cmd ipconfig) and connect to it using the RDP port (3128 on Windows)... ex: "192.168.100.199:3128"
If you want to use RDP away from home, you need to configure your router to forward any external connections on the RDP port directly to your PC. Then you'll want to connect using your external (router's) IP address. Ex: 111.222.333.444:3128 => 192.168.100.199:3128 .... then connect to "111.222.333.444:3128"
I like LogMeIn free and logMeIn Ignition great little app. also teamviewer has a free version and free app for android