Related
Can someone please tell me how to apply the screen protector that comes with the phone as it's just a large piece of clear plastic with no instructions how to physically attach it to the display!
It has a peel away backing which is much thinner than the protector.
I struggled to find how this attached when I got mine and have since put hair and smudges on the sticky backing. Can't wait for the new ones to come online mid May.
It's a sticker that you stick on the screen. How hard is this?!
Just put it on. Work cleanly though, be prepared and do it right the first time.
Bend the corner of the big part slightly and the two parts seperate
The part that goes onto the backing bit is what goes on screen
start from the top and smooth it down
As mentioned, work in a clean/dust free environment!
I've done it many times but even this time round, I got fluff inside - just one spec thinking as it was brand new out of the box, it wouldnt have anything on the screen and so I wouldnt need to clean it !
In removing the protector to clean it out... I ruined it
Got my new Brando one the other day which feels a bit more stronger and durable but still clear so I'll be putting that on later tonight
And now I have a air can with me too so if I get anything in the way, I can blow it out rather than trying to scrape it out
I've now put on the screen protector that came with the phone, but it feels a little thin and flimsy.
I'd like to know people's opinion of other aftermarket brands of protector for this phone as I'd like to get something a bit better quality.
Same thoughts here too
I ordered a pair from HTC direct but I think looking at them now that I have them, they are the same as the originals so I will probably not bother using them
I also have the Brando version now - Not opened yet but I will open and apply it to my phone tomorrow evening - just need a dust-free environment to test it
Apparently, Brando boast they have the best protectors so lets see
It does feel a lot stronger than the original
akash_84 said:
Same thoughts here too
I ordered a pair from HTC direct but I think looking at them now that I have them, they are the same as the originals so I will probably not bother using them
I also have the Brando version now - Not opened yet but I will open and apply it to my phone tomorrow evening - just need a dust-free environment to test it
Apparently, Brando boast they have the best protectors so lets see
It does feel a lot stronger than the original
Click to expand...
Click to collapse
Did you try this new Brando screen protector, and if so, is it any good?
Also, has anyone else had any experience of after-market screen protectors for this phone?
OK I applied mine today - sorry for the delay but I was just waiting for a time I could be patient !
I ordered it from HTCDirect as they are the only ones that had in stock
Recieved it promptly the next day so Kudos to them on that...also the guy I kept in touch with over email (Carlos if I remember correctly) was great and prompt in my queries.
My main query was - does it have the SAME fitment as the original bundled one.
As you know, the bundled one covers the entire screen including the slider for zoom and camera
The answer was Yes, it was exactly the same fitment.
So when I opened the pack, I was a bit annoyed as it was clearly NOT the same fitment! It's close however, but the top of the camera where on the HTC is all the way round with a small hole for the camera, the Brando one is in a U shape leaving the top bit of the camera open.
OK onto application
Just like all Brando protectors, it is protected by two covers on either end with clear instructions - pull one side BEFORE application and the other AFTER application
Once the dust was off the screen and the original protector...
I did just this - and after several attempts of lining it up - and I note, it is very EXACT in lining up. Slightly out and you will have more black on one side from the screen than the other.
Peeled it off, applied it and smoothed it out - the latter bit was hardly needed as the bubbles just vanished which was great.
At this state, the protector looked smoked a little and not as clear as the original one.
Once I was happy, I peeled the top part - noticed one bubble near the end where the label to peel was, smoothed it out and the protector was as clear as the original one.
First impressions:
It does feel MUCH more durable
It has a very slight and I mean SLIGHT smoked affect in that it is not 100% transparent as the original one but this shows how good it is potentially in strength.
Usage is fine, I can glide over it with my finger and stylus without any issues. The original was a finger print magnet but this seems to not stain with it which is great.
Now the downside....
I think HTCDirect sent me a slightly duff one. It has clearly got markings on the top (once the top layer was off) which look like impact marks.
It is very tiny - almost like what happens to a screen without a protector after 12months
I'm not too fussed but feel a bit cheated. Its no use removing it now as I would have no protector on it during the replacement stages - not to metion I would have to pay to ship back etc.
For now, I am ok with it but if it bugs me, I will throw it away and put the original one on (I ordered 2 extras from Clove who as usual, got it to me instantly, good communications and speed in delivery).
The clove one has no marks at all so thats an option.
Hope this answers some of your questions but to summarise your question
Is it stronger?
Yes it is
Is it worth it?
If you can get one mark free - yes it is
Benefits?
It's re-usable, stronger, washable, and I notice it does not let as much light reflect of it - something I had huge problems with in the sunlight with the original one where I could not see the screen - I am not exaggerating!
Downsides?
Where I got mine from, it has marks on it - something that might just force me to remove it and go back to the original one
Also the camera does not go in a O shape but rather a U shape
OK during the submit button, I realsed the marks and the U shape was bugging me too much
I knew it was a matter of time that gap in the U would get clogged up with dust that would eventually get stuck around the U bit
Removed it and applied the original one I bought from Clove... I have two so if it does wear down, I can replace it
I know from experiance that the original one in the box that I applied lasted fine up till now (a month now since I've had my TD2) so I dont doubt that it will be worn out - May not last as long as Brando's guarantee of it outlasting te device but that's fine given the price of the HTC ones.
Applied it without any dust getting trapped (the main reason I had to buy these and the brando one)
I found those marks were actually dust that was already stuck under the protective layer - whether this is HTCDirects fault or Brando during factory release - who knows but I think as a lesson, I'm staying away from both and sticking to the original stuff.
Hope you make the right decision either way - for now, a brando goes into the bin
akash_84 said:
Bend the corner of the big part slightly and the two parts seperate
The part that goes onto the backing bit is what goes on screen
start from the top and smooth it down
As mentioned, work in a clean/dust free environment!
I've done it many times but even this time round, I got fluff inside - just one spec thinking as it was brand new out of the box, it wouldnt have anything on the screen and so I wouldnt need to clean it !
In removing the protector to clean it out... I ruined it
Got my new Brando one the other day which feels a bit more stronger and durable but still clear so I'll be putting that on later tonight
And now I have a air can with me too so if I get anything in the way, I can blow it out rather than trying to scrape it out
Click to expand...
Click to collapse
damnit, didn't pay enough attention to dust & co...so after i saw that i catched a few dust pieces under it, i've tried to get them out manually - big mistake.
so trashed the original one and waiting for the new brando to put it on. being a former iphone-user, i must admit that the diamond2 screen is pretty sensible to scratches. i thought that i won't be needing any protection, but i already have a few small ones...so a screen protection is a must-have now.
Should have read this first
I should have read this thread before I tried to apply my screen protector. Straight away I had dust underneath the screen protector. Obviously I will now have to order some more protectors but will I be alright using my phone until they arrive? How delicate is the td2 screen?
You'll be fine using it while its there - just be annoying to see the dust specs!
I ordered a pair of the original ones in the end as I was not happy at all with the premium Brando one - the look, feel and visibility was terrible
Reason I ordered 2 of the original ones is I was hearing rumours before the unit was even released that the original HTC one was not durable and would need to be replaced after x amount of months - having had mine for 4-5 months now and with heavy usage, I can report back to say the first protector of the two is still on there - still very clean with no stylus/finger/nail marks and still as durable as it was when I put it first on.
arsenal84 said:
I should have read this thread before I tried to apply my screen protector. Straight away I had dust underneath the screen protector. Obviously I will now have to order some more protectors but will I be alright using my phone until they arrive? How delicate is the td2 screen?
Click to expand...
Click to collapse
From what other threads are saying the screen should be treated with care. Don't push it hard and avoid impacts. Don't stick the phone in your back pocket! Some people have experienced damaged screens even after a short time.
Shouldnt put any phone in your back pocket!
The number of phones I have to fix or write off because they have had severe pressure on them - ie: sitting on them has increased 5 fold recently.
And lets face it...the countries population are not getting any thinner/smaller!
eXelero said:
damnit, didn't pay enough attention to dust & co...so after i saw that i catched a few dust pieces under it, i've tried to get them out manually
Click to expand...
Click to collapse
I know it is not recommended. but I use a small drop of water on the screen before applying the screen, wiping the water as it is squeeze out. The water takes the dust with it.
Hi
I've applied mine that came with the Diamond 2 and after a few attempts you can't see it is there. Ironically I fits so well I almost want to put another screen protector on top of it so it doesn't become damaged and need replacing.
Anyway a tip. Working in a dust free environment is the key. A bathroom is a good place. I have a hepa air filter (for hayfever) and this removes dust really well so run that for a bit which helps.
With all the care in the world dust can get underneath, I had a few specs, and they tend to cause a small bubble as the screen screen protector can't fit flush. I found it very easy to remove them. Have some sticky tape handy, this can be used to lift up the screen protector from the corner. Lift it back up enough to get to the spec of dust, and using another piece of sticky tape dab the spec of dust off the sticky side of the protector, then lay it back down.
Regards
Phil
Hairs
Fru T Bunn said:
It has a peel away backing which is much thinner than the protector.
I struggled to find how this attached when I got mine and have since put hair and smudges on the sticky backing. Can't wait for the new ones to come online mid May.
Click to expand...
Click to collapse
I know what you mean I made an okay job of the one that came with it. The rubber case I bought of eBay came with one as well and made a right pigs ear of that. I think they need to be applied in a clean room
I've since bought some more off eBay so next time, I'm going to be a lot more careful!
Cheers, Rob.
I got 3 screen protectors with the original phone (2 of them as a gift). The first one was perfect except for a piece of fluff near the middle of the screen. I tried to remove it with a cloth(!!!) and ruined it. So I went for the second one, but at this stage the screen was not clean so I tried to use a microfibre cloth, which made it worse because it leaves even more fluff. I tried to fix it a few times and so now I have fluff inside, plus a bubble (the protector is a bit scratched) plus it doesn't stick properly on most of the sides and around the holes.
I am tempted to use the last one, but if I ruin it once more I am out of them. My biggest problem is how to clean the screen before sticking the protector. Will all the fluff come away when I remove the old protector? How can I clean the screen, knowing that the microfibre leaves fluff? Shall I blow with a can of compressed air?
I find magic tape is great for removing dust spots. Use the backing sheet to gently lift a corner then push the tape underneath to clean screen or protector as needed.
My favourite screen protectors are from Martin Fields. Really tough and easy to apply. Also, they are washable so if you do get a real dust problem you just take it off an run under the tap. Don't try that with the phone though...
My MyTouch 3G Slide has a couple defects. The bezel or plastic housing that surrounds the upper portion of the device surrounding the screen has gaps in it around the seam that allows dust or any small particulate to enter under the screen. I have looked at several of the devices and they all have it to one degree or another. For instance, on my Slide I have 3 of these holes one of which has allowed a grain of sand under my screen. My wife's Slide has 4 of these holes or gaps and they are substantial on her phone. One XDA member has had this happen in the same spot that both my wife and my Slides are collecting dust.
While the light leaks or gaps in the bezel are a problem (for me) I think the real problem lies in the adhesive strip that connects the digitizer to the LCD screen. The way the digitizer is adhered to the LCD there shouldn't be any way for dust to have gotten in between the two pieces of hardware. I'd like to believe that it was just my particular phone but my wife's phone is having the exact same issue.
The phone really is phenomenal and I'm sure it was just a fluke that I've had issues (hoping so). Just keep an eye out for any issues similar to what I've mentioned above. I have really gone back and forth with this and I am definitely disappointed with having an issue(s) right out of the gate. My wife really likes the phone and after giving it some thought I like it as well ... a lot. I will return and reorder another couple Slides because this device is that awesome. Thanks for your thoughts/contributions to the thread.
I've tried to get some photos of the gaps but they are small and hard to photograph. To inspect your device: Go into a dark area and pull up your contacts, messaging app or a white web page in the browser with full screen brightness and inspect the seam of the plastic housing surrounding the touch screen on the top half of the slide. The gaps are almost like rectangular notches just below/above the corners of the screen in the seam. My theory is that these are artifacts from the plastic molding process that were exacerbated by poor/hasty assembly. I am definitely returning my Slides.
Its all true. After reading, and seeing the image posted by another member here, I checked my phone. I went into a dark room, opened up a site that has pretty much a white page, and I too noticed a gap at the bottom right hand corner of my screen. As of right now no dust/dirt has shown up under my screen, but what's to say that it won't later on. Heck, screw dirt. What if moisture finds its way in, and starts to fog up the screen from within? This could be a major problem later on down the road.
whew... just checked mine, noticed nothing like that, thank goodness.
[email protected] said:
whew... just checked mine, noticed nothing like that, thank goodness.
Click to expand...
Click to collapse
Strange, I've confirmed with everyone I know with a Slide (only black and white thus far) and everyone is seeing the same thing. What color Slide did you get? I wonder if the red Slide is manufactured differently? Anyway, that is awesome because I think the phone is GREAT other than the small gaps in the bezel.
I will say I took some compressed air and attempted to move the artifact under my screen just to see if air was moving through those gaps. The grain of sand or whatever it is did not budge. I'm just not sure what to think. I hate the idea of returning this phone ...
Mine is like that. Not that i care much as im returning it soon. But it does have gaps and light leakage all over the bottom of the screen, near the buttons.
i just check my and maybe i cant see it but i havent found anything... i have a red one
Re: My MT3G Slides (and others) Have A Defective Touch Screen Bezel
Initialy checked mine as well, black. I don't appear to have this problem either.
I will inspect further to verify.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
The only one I have is at the very bottom of the buttons, which might even just be the light hitting the glass at a specific angle. Other than that, no light leaks/cracks/blocks/whatever you call them on my screen area. Red Espresso.
I just swapped my white MTS for a Black one with no signs of cracks or light showing threw. TMO rep did not know of this problem and said he would send out an e-mail to other reps to let them know.
My day is now ruined
Yep, both bottom sides, right at the corners, above the buttons. I will not return it though, think instead a lil duct tape and some JB weld will do (seriously, a little touch of black silicon for a good seal, still sucks though). Screen cover seems to be blocking any dirt at the moment.
woow good looking out.. i was wondering how a spec of dust got to my screen. im planning on putting a piece of scotch tape over those regions (i have a red slide btw).
I have a red one and didn't see any leaks bottom or top. Thank goodness!
mtjnkee said:
seriously, a little touch of black silicon for a good seal
Click to expand...
Click to collapse
I hear you; I've been trying to find a way to keep the bezel sealed until I can get a case/cover for the phone. I literally have one tiny grain of sand at the bottom left hand corner of my screen. I so don't want to return the phone; I'm in love with the thing.
Glad to hear some of you have a better seal on the bezel.
I have some small light leak on the bottom, not an issue yet and I'm still within my 14 days so I might stop by the t mobile store tomorrow and try to get a replacement.
1. slight curved gaps at the corner edge where the top of the plastic curves down to turn into the sides. check
2. vertical rectangular light leak above home and genius keys. check
3. these lights only light up when hard keys are lit..when screen first lights up...light leaks are not there...once keys light up, light in the gaps light up. doesnt this mean the screen is sealed and there is no leak from the screen itself?
4. however, if you have a creaky top plastic housing, the seam running along the edge of the white plastic and grey plastic is not flush...on my 1st slide, i could see the screen light up in these 'cracks' of the seam...could debris get into screen this way then?
5. for those with debris already at lower left part of screen: pls do me a favor:
hold phone (sideways with back cover facing the ground) at just below eye level and try to see that left corner that is underneath the painted black surround of the screen..do you see white light when the screen is lit? if you look along the 'inside' edges along the rest of the phone, you will see that there should not be white light emitting out and should have a 'clean' look...there should basically be a solid black border...perhaps, if you guys have this white lighting show through, that could mean a separation of the screen somehow? btw, you do not have to be in a dark room to see this light along the inside edge....it is very noticable as the light comes thru where i think there should be no light. ps: when looking at the phone screen normally (ie from top down), screen looks perfect and this issue doesnt affect actual picture on screen.
my first slide had the light leaks but i didnt think anything of them as i thought they were related to the buttons only...but the issue i had spoke of in #5 above, i had this light coming thru along the whole edge of the bottom of the screen plus creaky top plastic housing.
I have dust under the entire screen of 2 Slides (Espresso), I couldn't notice it indoors but it is glaringly apparent when in the sun. The phones go back tomorrow. I've had my G1 for a year and a half with not a single spec of dust under the screen. I've had 2 MT3G Slides (Espresso) for 6 days and dust is under both screens; these devices are very cheaply made. Phone is lightning fast, screen size is great, physical keyboard is great, UI has some excellent features you can find nowhere else ... too bad I won't be keeping them. Been nice knowing you guys.
Seriously everyone be lucky that this is the only problem that people are having with this phone. You want to talk about shoddy build quality on first run devices, lets not even mention what the original PSP was like. If all that's wrong is that a few people have a bad bezel, then I'd say you made out well with the phone. NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.
xenoletum said:
NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.
Click to expand...
Click to collapse
Well I have to send them back as I ordered them online. 2 phones plus about 5 other people I know with these phones have dust blowing in under the defective bezel. It's unacceptable. Like I care about a PSP. What the hell does a PSP have to do with this? You didn't even comment on your phone having the light leaks/gaps or not. What is your point? You think folks should settle for inferior builds of an expensive phone? You can ignore whatever you'd like. I will wait for a better phone.
Wanted to add to my previous post about mine not having the leak... I have the red one.
it had dust under the screen? As I was cleaning my screen today, I noticed two minuscule particles of dust under the screen. They are very close to the right and left edges of the screen, so Im assuming they somehow got through the small gap on those sides of the screen (if you look at the G2 on a flat plane, you notice a small gap between the screen and the side of the phone. The side is slightly more elevated than the screen at the center of the phone.). Im just worried about more dust getting under there, so should I exchange it under warranty. Other than that the phone has been flawless except for the typical "loose" hinge.
BTW the gap Im taking about is not a horizontal gap. Its a vertical gap, like the screen doesnt sit flush with the casing. Its noticeable on both sides, more towards the center of the device. If someone could verify with their phone it would be helpful.
Probably wouldn't bother me. I haven't had the issue of anything getting under my screen and I've had the phone since it was released. You can always have tmobile send you a replacement however there probably only going to send you a refurb G2. Some times it just pays to leave well enough alone but when its something that annoys you I can certianly understand.
Sent from my CM7 powered G2
I've accumulated quite a few dust particles under my screen. They're mostly collected in the bottom left corner but more are picking up on the right. Apparently this is a well known issue because of the gap between the screen and the housing.
I'm gonna line up a replacement for mine because its starting to get on my nerves. One of those things that once you know its there, all you do is look at it lol.
If I were you and its only two or so specs of dust, I wouldn't really wanna go through the hassle of an exchange until it got worse.
Decided Im not gonna exchange it over 2 small pieces of dust (the size of a thin pencil tip). Especially considering everything else is working fine and I will possibly get a refurb replacement.
I just went through a replacement nightmare all because of having dust under the screen.. Within the first couple weeks of me getting the phone, I started noticing a bunch of dust particles accumulating in the lower left corner of the screen. After a month, there was a noticeable line of dust, in a 1 inch x 1 inch square at the far bottom left. After the 2nd month, it was starting to be noticeable while the screen was on too, and was starting to make it tough to read that lower corner.
I went to a T-Mobile store, just to make sure that it would be covered under warranty. They said absolutely, and offered to swap it out in the store - I had a ton of data and text messages not backed up, so I said I'd be back once I backed everything up.
Well, I should have gone to the store again, instead I called customer service and processed it over the phone. They mailed me a replacement phone ASAP, actually got it the next day. I packed up the old phone, sent it back, and thought everything was done. 2 weeks later, I got a letter saying that it's not under warranty, that the phone had physical damage, and they had charged my account $295 for the new phone.. After a very frustrating hour on the phone with customer service, and going through the following: They wouldn't send me the old phone back, wouldn't let me talk to anyone who had access to look at the phone, wouldn't/couldn't even give me a description of what physical damage there was - they finally agreed to credit me back the $295.
Sorry for the long post, just getting all the info in there.
Short version - If you have a warranty issue, bring it to a store!
I had this problem with my first phone, Lots of dust under the bottom left corner. I called tmobile and they swapped it out with another phone no question. Its been over a month and I havent seen got anything saying the phone was not covered by the warranty. This phone seems much better than the first one so im being more careful with where I put it and how I handle it to minimize the chances of dust invading it.
Gap between the screen and the housing... Huh? Its sealed tight. No gap, no dust. Yours has obviously been bashed up.
dhkr123 said:
Gap between the screen and the housing... Huh? Its sealed tight. No gap, no dust. Yours has obviously been bashed up.
Click to expand...
Click to collapse
I could tell you for a fact this phone is not bashed up, its been babied since I got it (couple days before Christmas). As soon as I got it a Otterbox case was placed on it. Phone sits in my jacket pocket. So how it would get bashed up is beyond me.
BTW the gap Im taking about is not a horizontal gap. Its a vertical gap, like the screen doesnt sit flush with the casing. Its noticeable on both sides, more towards the center of the device. If someone could verify with their phone it would be helpful.
i will not change it
rtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrt
So! Back in December 2010, I ordered a Zagg Invisible Shield for my significant other. It arrived in time for Christmas.
We noticed on the protector, before installation, while it was still on the original packaging sheet, there was orange peel, (for those who don't know, orange peel is a surface that looks and somewhat feels like the texture of an actual orange; small bumps.) There was also outlines on the front, to what looks like something heavy was set on the sheet either when it was manufactured, or packaged.
On top of that, there were in-prints of lines going across the protector, A 'square-shaped' in-print, from what looks like the same shape and size of either the solution bottle that it comes with, or the SKU SONERCX2FB sticker that they might stamp on the plastic bag while the protector is 'hot-off-the-press.
We were hoping once it was placed on the phone, it would smooth out, and go away... IT STAYED THERE.
It bugged him, there was rainbow effects, you can see the annoying inprints clearly while the screen is in use. THE SCREEN VIEW IS DISTORTED. Tilt the phone towards the right lighting, and you can still see them.
The protector isn't really smooth, it is soft, it does grab the stylus/nail. Creates a drag.
We made sure it cured for a day before using, to make sure the skin dries and adheres to the phone.
Its been couple months, and dirt has already found its way in the corners, started peeling, and has somewhat changed its color to being less clear.
GUESS WHAT? I decided to order another one in early February 2011, because I didn't want his new phone unprotected. I don't have patience for the exchange time period.
The new protector arrives. AND GUESS WHAT AGAIN??? IT'S THE SAME CONDITION AS THE FIRST ONE I ORDERED!! It had orange peel and line in print across the screen! Perfect 'square-shaped' in-prints! I didn't even bother to put it on.
STAY AWAY FROM INVISIBLESHIELD. I do not recommend this company AT ALL. Waste of money! Don't except anything better that GARBAGE.
Try Martin Field. http://www.martinfields.com/US/Print/MFOP-SEXperiaX2/en
Thanks for listening to my rant.
If course the pictures don't do justice, I tried.
I'm a Xperia X1i user, I recommend Shinomi (from Amazon.com) It pretty much covers the entire phone! (Camera lens, the sides, literally top and bottom of the phone.) Takes a while to install, but worth it.
I'm close to my 14 days return period at bb and suddenly I noticed that the glass screen on my Iconia is separating a bit noticeable enough for my fingers to feel it when I touch that section. It is the area at the docking connector side, the screen is raised a bit higher than the side metal bezel. When I pushed it down hard it flushed back in but raised again after some time. I never noticed it before and I've been really using it daily for more than a week now and only until yesterday I saw this. I feel really bad because I really love my Iconia and was really planning to keep it. I had the same issue with my HTC EVO, but I held on to it because I've read in the EVO forum that others have even worst screen separation and mine wasn't as bad. So I'm wondering if most Iconias have this issue so I don't need to return it anymore. I've checked the display unit at bb and it has same screen lifting around that section near the docking connector.
Sent from my A500 using Tapatalk
Same issue here. I noticed it the other day. I have a week left on my 14 day return period. Honestly it is not that big of a problem to me. I cannot push it back down, I just figured it was made that way. I noticed the demo unit at my local best buy was the same way. I do not think it is a deal breaker to me.
Yeah mine is like that too :\
MMm - no trouble here yet. Then again I was a first generation nook owner who never had a button crack, and those were hard to find ;-)
I take mine to and from work every day and use it at least 2 hours a day not counting weekend software development time where it's my test platform, so you could call mine pretty high wear and tear.
So it seems like it is common to have that slight lift on the screen and hopefully will not get worst than it is. I will just keep it and not replace with another one, who knows the replacement might even be worst or have dust like the others were complaining. I've put too much time setting this up and I really love it even with all the criticism it gets from other users.
I feel a slight raise on mine - but far from calling it an issue.
There's some dust particles getting under there now...think Staples would accept a return for that? Still in my 14 days. It's annoying.
Staples told me they would take it back for any reason in 14 days... even if you just decided you didn't like it.
cdkizzle said:
There's some dust particles getting under there now...think Staples would accept a return for that? Still in my 14 days. It's annoying.
Click to expand...
Click to collapse
Oh no, I hate dust inside the screen. Was your screen raised really high or just a bit?
Sent from my A500 using Tapatalk
lol. There shouldn't be any question at all....take it back.
I'm not returning mine but this is irritating for sure
I believe it is designed that way, just as there is the gap between the glass and frame on the opposite side (where the microphone is placed in the center).
I for one find the A500 a great piece of hardware, and this doesn't bother me a bit... I actually hadn't noticed until you mentioned it here ;-)
Sent from my A500 using XDA Premium App
Raised here as well
Looks like an intentional raise to me though. The sides are flush and begin to raise about 1.5 inches in from the side of the tablet toward the center until it reaches it's highest point dead center to the dock port. Then back down by the same amount.
If it is not intentional it sure is a nicely implemented defect.
If I run my finger along the edge of the screen I can feel the glass being raised ever so slightly, fractions of a millimeter, towards the middle, above the dock connector.
Though as I look closer and use a metal ruler I find that it's not the glass that is raised but rather the bezel that is lowered slightly in the middle, above the connector.
All of them I have seen are like that, don't think its a defect at all.
It looks like it is easy for dust to get in past the microsd slot area as you can see the back of the screen through the cracks. I would be careful outside and in dusty areas. I am going to look for a sleeve that covers it or something...it should be sealed better than this.
I haven't had any dust yet, (hopefully never) and my screen is raised. (or the bezel is lowered)
I'm getting that too now. It's definately raised. I checked when the OP first posted this and it was not like this. Now I can press on the glass just above and slightly to the right of the dock connector and the screen goes down flatter. The raised area is not quite centered. I've had this tablet 3 days shy of 1 month.
Sent from my A500 using Tapatalk