Related
Hi I've been reading these forums for ages but only just signed up, I'm looking to root my hero (surprise) and complete newb.
Basically current build/software is 3.32.405.1 so 2.1, followed the rooting instructions exactly, then rebooted holding home and power on buttons but it just boots straight into a red triangle with exclamation mark in the middle of it, I can hold power and volume up to get a small menu with apply sdcard: update but tried that after getting frustrated and that said that the file wasn't verified.
how do I get the normal recovery screen because already have a villainrom on the sdcard.
You need to do the root process to get to the care bear, then flash villainrom on the care bear, before rebooting.
That will get you sorted
Well I rooted using universal androot, then used the teminal to input the su (press enter)
flash_image recovery /sdcard/recovery.img (press enter) part of instructions but at no point do I see the care bear :S
I have the same problem as Ejen. The phone is root i have superuser permission i do titanium backup .I put RA-hero-v1.7.0.1 with Better Terminal Emulator. When I turn off phone and press Home&Power I get a picture phone with a triangle. Does anyone have an idea how to solve this?
Yes, this is because stock rom automatically reflashes recovery with the stock one each shutdown iirc.
You need to stop this happening, but I can't remember the command. When you have root using universal androot though, you can stop it happening.
Or maybe it's too early for me. Wait till I've had a coffee or two and I'll revisit this...
Perhaps you can edit /system/etc/install-recovery.sh. A quick look trough /system didn't find anything like a shutdown script so perhaps this file is run by the android environment.
I had this same issue the other night, been searching for a fix, hopefully one appears here soon, thanks Pulser_g2, i was hoping to install your 1.5 Rom
Bloke
Ah seems I'm not the only one well at least I wasn't just being silly then, well tried it multiple times but still seem to have no success even tried the unlockr websites method with no success either.
If anyone knows thanks
Right... Are you on 1.5 or 2.1 just now?
Could someone (preferably the most tech savvy here) if you're on 2.1, try http://forum.xda-developers.com/showthread.php?t=726118 and see if that works.
I'm trying to work out what's going on here...
P
I'm 2.1 and had been using your other guide to root my phone but embarrasingly got stuck at stage 2 whilst trying to set up ADB (my knowledge of cmd is very limited to the point I only know the command tree ), saw the guide on XDA and thought that looks really simple so tried that instead, then tried unlockr method when XDA's didn't work now given up and asked for help
Ejen said:
I'm 2.1 and had been using your other guide to root my phone but embarrasingly got stuck at stage 2 whilst trying to set up ADB (my knowledge of cmd is very limited to the point I only know the command tree ), saw the guide on XDA and thought that looks really simple so tried that instead, then tried unlockr method when XDA's didn't work now given up and asked for help
Click to expand...
Click to collapse
Ok,... So how far did you get on setting up adb http://www.villainrom.co.uk/forum/s...de-Setting-up-ADB-and-how-to-use-it.-(Windows) ?
I had done up to part 4 using ADB, opened up cmd prompt I couldn't seem to push stuff to the SD card and was unsure what I did wrong.
When checking the USB works part 3, I used the link chose part 2, HTC sync users > ADB I couldn't find android_winusb when updating the driver software. I'm probably missing something or being silly now but I don't know
Ejen said:
I had done up to part 4 using ADB, opened up cmd prompt I couldn't seem to push stuff to the SD card and was unsure what I did wrong.
When checking the USB works part 3, I used the link chose part 2, HTC sync users > ADB I couldn't find android_winusb when updating the driver software. I'm probably missing something or being silly now but I don't know
Click to expand...
Click to collapse
Type adb devices, and if you see your phone's serial number, then you don't need to worry about drivers. Remember to "cd" into the correct folder first.
I'll try that but CD did nothing I'm running windows 7 and it sticks on C:\users\username Can't go back
Ejen said:
I'll try that but CD did nothing I'm running windows 7 and it sticks on C:\users\username Can't go back
Click to expand...
Click to collapse
Where have you downloaded your Android SDK too?
for example > "cd c:\SDK\tools"
pulser_g2 said:
Right... Are you on 1.5 or 2.1 just now?
Could someone (preferably the most tech savvy here) if you're on 2.1, try VillainROM Roots 2.1 and see if that works.
I'm trying to work out what's going on here...
P
Click to expand...
Click to collapse
I guess that is already on the phone RA-hero-v1.7.0.1 as you said stock rom automatically reflashes recovery. I suppose that the method VillainROM Roots 2.1contains RA-hero-v1.6.2.img. What will then happen with recovery if i try to do again root with VillainROM Roots 2.1?
When you try that method, you get the phone booted into patched recovery, at which point you take a nandroid backup and flash a custom ROM.
this prevents the recovery being lost. Just try it
I'm not at home and can not install ADB and run runindos.bat. I have on SD card recovery and FroydVillain 1.5. That's why I tried this method.Next week I'll be home and if someone does not fix the problem i will try the method you suggested me.
Can I try to put again recovery with Better Terminal Emulator, maybe recovery was corrupted ....
i went through the same thing!!
Ejen said:
Hi I've been reading these forums for ages but only just signed up, I'm looking to root my hero (surprise) and complete newb.
Basically current build/software is 3.32.405.1 so 2.1, followed the rooting instructions exactly, then rebooted holding home and power on buttons but it just boots straight into a red triangle with exclamation mark in the middle of it, I can hold power and volume up to get a small menu with apply sdcard: update but tried that after getting frustrated and that said that the file wasn't verified.
how do I get the normal recovery screen because already have a villainrom on the sdcard.
Click to expand...
Click to collapse
helloo!! i apologise if i am interupting or butting in whilst your in the middle of other solutions... i just saw the title and jump right in. i went through the exact same thing just 2 weeks ago!! unfortunately for me there was no successful forums or websites at the time... it sounded like a simple problem, with no simple solution.
this may not be what you where looking for, but its a very quick easy method that definately worth a try.
so... am i right in saying you have the official OTA HTC android 2.1 update?? and you now want to get this rooted?? and have you also tried rooting using the two common methods, the "one click root" and the "unrevoked" one? thats wat i did and i kept being stuck at the same red triangle and exclamation mark.
those methods (and countless others) will not work with the official htc hero android 2.1. (as far as i know) what you will need to do is downgrade the phones software. check htc's website and look for the older RUU and using the computer get your hero back to android 1.5. (under no circumstance should you upgrade your 1.5 android to the 2.1 android via HTC's OTA update... its only going the remove the root access!!!! - always reject it)
then continue to root as per the numerous rooting guides. done? now, obviously you will want to flash an android 2.1 rom. if you want to keep to htc's original 2.1, you can search for this in the forums under 'development'. or go ahead and flash the custom roms (villianrom).
thats exactly how i did it. im not entirely sure if this is the info you are after... but reply back and ill be happy to answer any query - big or small. (i should warn you, im no expert - but this forum is filled with the earths most powerful brains - u should have an answer in no time!!)
I have an HTC Hero. I ran the simple root method and got Carebare response.
I too have read numerous threads in the forum here and elsewhere but can't seem to get past the USB section.
adb says no device
I can use HTC Sync to sync data to the phone.
The SDK is installed and I have previously used it to capture screen shots of my device.
If I try to run one of the RUU executables, it fails with a [114: USB Error] (number may be wrong but the message is right.
I can mount the SD card and copy files to/from it.
I am running Windows 7 Home Premium 64bit on a Quad Core AMD CPU.
If I do the Home/Power thing, I get the same red triangle as described in the 1st message of this thread.
Fwiw, I have successfully and repeated loaded ROM's on my previous phone (HTC S621) so I am not a complete newb (but i am newb to Android).
What am I missing? This shouldn't be this hard (at least from what I've seen posted anyway)
Ok so found by mistake but will help ones with no sd slot to make goldcard
Ok so first dl. Superoneclick root then the auto rooter for 2.1 will let u know what its called later(ultra easy rooter)
Next 1a.open super1click and ulter easy rooter
2a.in super1click do the shell root
3a.the run ulter easy rooter,once finished u will be at the fastboot screen
4a.click fast boot to go to boot loader screen and then hit vol up to update"esrpimg" once that is done u will be back to 2.1.
5a.once the phone has loaded back up to 2.1 and root just go to recovery and load a rom
NOTE: put update.zip on root of sd so u can load cwm other wish u only get root
AND sry still no way to get soff....
HOPE that is better........for the pickie ones
That is by far the longest run on sentence ive ever seen. You should edit and complete your thoughts. As well as add info on to what your actually explaining. Such as a complete history of the problem. And links to the original related post.
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App
Is this just another root method or will this also downgrade H-Boot, allowing someone to achieve S-Off after downgrading from 2.2 and H-Boot 1.0+
Your phone info in your sig says that your mytouch slide is S-Off'd. If it's true that you can achieve S-Off using this method, that would be huge news.
From what I have tryed alparev does not get soff when I did the downgrade all got changed buttbut the bootloader and the hboot will not allow me to get soff so so far no luck
the hoboot i have after downgrade is hboot 1.02.0000
now i dont know what the old hboot was so if anyone knows plz let me know so I can try to push it sum how
Thats sig is because I have muti slides so plz don't mistake it for what I'm posting now all this was tryed on new slide with 2.2.1
Has anyone ever tested this? I don't have a MT3GS anymore but this seems like a pretty awesome and pain free process to gain root.
I would also like to know if this works?
Yes it does work have done it muti times just to check and check YES it works.....
YES this surprisingly does work. The only problem I had was that the update file wasn't on my SD card so I continued to get a signature filed message when I tried to update. All I did was to copy the file from the mtg rooter fille over to my SD card and ran the update and it worked perfectly. I'm rooted and very happy!
Had to get my slide replaced and the new one came with 2.2.1. I used this method and it got me back to a rooted 2.1 state just like it says. Thanks for coming up with this one.
Really quick and easy! Thanks so much. Too bad T-Mobile is shipping these with 2.2.1 on them, no more S-Off...
Outstanding! Thanks for the tip. Worked flawlessly.
This would be awesome if there were links to where to download everything so someone doesn't download the wrong thing by mistake
important links
I agree with the last post ... links are critical here. This was the easiest rooting process I have ever encountered. Below are links left out by OP. Follow OP's instructions with these files and you'll be rooted quickly and painlessly.
super one click (v1.7 worked flawlessly for me)
http://forum.xda-developers.com/attachment.php?attachmentid=526223&d=1298565480
ultra easy rooter (mt3gslide specific)
http://www.fileserve.com/file/y8yFvWb
This method should be the new rooting method for folks receiving replacement or new slides with 2.2. This should, IMO, be in development.
Thank god for this method. My phone up and died and the replacement came with 2.2.1. I tried a few other methods that failed. This one worked like a charm.
nice
wish i would have stopped back here would have saved me from having to downgrade, root, then upgrade back too 2.2 smh.... lol but nice to know yeah!!!!
Very helpful
I am going to try this method soon. Do we need anything else other than those two files to get our phones operational again? I want to try cm7 nightly, but want to make sure the phone would work before trying to put on another rom.
dudas
hello friends xda congratulate you for helping and answering all our Unknowns but I wanted to ask for help with root touch me slide my'm total newbie at this and am having problems with the root of my phone if I do not understand and this is the only place to do this is here and we wanted to have some aid perire video on how to do it : Confused:: Confused:
crazygerz said:
hello friends xda congratulate you for helping and answering all our Unknowns but I wanted to ask for help with root touch me slide my'm total newbie at this and am having problems with the root of my phone if I do not understand and this is the only place to do this is here and we wanted to have some aid perire video on how to do it : Confused:: Confused:
Click to expand...
Click to collapse
1. Download the 2 files in post #13/ thanks NJAZ (SuperOneClickv1.7-ShortFuse.zip and mt3srooter.zip)
2. Extract them to their own folders on the desktop of your computer
3. Run the .exe files within each of the folders (open the programs SuperOneClick and mt3srooter--run as admin if using Vista or Win7)
4.In the Super1Click program, click "Shell Root", wait a moment til it does its thing
5.In the mt3gs rooter program, click on "Root Me"
It will tell you to turn on the wifi on your phone, and you must do it within 30 seconds, so hurry
6.Your phone will reboot into bootloader mode if all goes well. Use your volume buttons to navigate down to the fastboot option, and choose it with the power button. The phone will scan your sd card and find ESPRIMG.zip, and take a while checking the file. When it is finished checking the file, press the volume up button to confirm that you want to flash the file. Once it is finished flashing, you're rooted on stock 2.1 Eclair ROM.
I dont know if these programs put the update.zip for CWM onto your sd card too, I already had that and the ESPRIMG.zip on my card when I used this method, so if all else fails you, put a card into your phone with these files on the root of it into your phone and then use the 2 programs to gain root. Dont be afraid to try it a couple of times if it doesn't work the first time, and make sure that you have the correct drivers for your phone installed on your computer. To get into CWM Recovery to be able to flash custom ROMs, boot into bootloade by starting your phone and holding the vol-down button, and you will get a black screen with a red triangle. Then press power and vol-down and choose "Apply Update.zip" and in a moment you will be in CWM Recovery,as long as you have the file on the root of your sd card.
Just thought I'd spell it all out very detailed and simple for anybody less familiar with all this kind of stuff, makes for less "please explain step #...." posts.
ugh
this is soooo lame!!!!!!!!!!! n not ur post but my situation i cant get it!!!! it goes thru the process on ultra easy but one it get to the writting on cmd it says it wasnt "cd /sqlite_stmt_journals" then it says that the exploidcant be found and the rest of the other things that the program tries to push....im getting so frustrated..ived rooted g1 mytouch droid evo ived unlocked jailbroken all iphone models from 1st gen to iphone 4 all ipods unlocked blackberrys gotten to root on hd7 put android and wp7 on a hd2.... but this devices i am having so many problems!!!! ived tried every method and get to the same stop forget this phone im getting on craigslist n trading!
this worked for me....im still having problems with the a2sd tho...
Rooting & Flashing To Stock 2.1
1. Download the files below
2. Copy "ESPRIMG.zip" to the root of your sd card on your phone
3. Extract "Super-Click 2.3.1" & "Mt3s Rooter" to their own folders on your computer
4. Navigate to settings on your phone. Select "Connect to Pc", choose "Charge Only"
5. Navigate to "Applications" then select "Devolpment" and make sure "USB Debugging" is on
6. Run the .exe files within each of the folders (Run .exe as Admin if your using Vista/Win7)
7. In SuperOneClick, select "Shell Root", wait for it to finish rooting
8. In the mt3gs rooter program, click on "Root Me"
You will need to turn on the phones WIFI within 30 seconds so be quick and then wait for it to restart.
9. Once your phone is rebooted it should be in BOOTLOADER Mode. Press volume down to select fastboot (If it doesnt show fastboot then select Bootloader and it will then show the menu with fastboot).
Once fastboot is highlighted, press the power button once.
It will check for ESPRIMG.zip and should show a progress bar in the top right.
After waiting a while it will ask you if you want to update, press volume up.
When it is finished it will ask to reboot, press volume up to do so. (If phone says on Mytouch circle for too long just take out the battery and restart)
If you want to put CM7 on your phone do instructions below.
Installing CM7 with Google Apps
1. Rename "update-cm-7.0.3-Slide-signed.zip" to "update.zip"
3. Copy "Update" & "gapps-gb-20110613-signed" to the root of your phone
4. Turn your phone off. Once off press and hold the volume down and power button at the same time.
5. It will look for the ESPRIMG again, after its done you will see the menu. Highlight "Recovery" and press the power button
6. A Red Triangle screen will show. Press volume up and power, then select "Wipe data/factory reset" then done do the same with "Wipe cache partition
7. After all that you will select "Apply sdcard:update.zip"
8. Select reboot system now
9. Once phone is restarted go into the app drawer and open ROM Manager.
10. Scroll down and select "Download Rom" then select install and then select the option it shows. It should say that Clockwork Mod installed.
11. Now select "Install Rom from SD Card" and select "gapps-gb-20110613-signed" and press OK twice.
It will reboot and show it installing.
Once done it will reboot again and your done. (Btw it will have you sign in and such)
DOWNLOAD THESE FILES:
SuperOneClick 2.3.1-
http://depositfiles.com/files/n0dcxce3t
Mt3s Rooter-
http://depositfiles.com/files/hn8tn6141
or
http://www.mediafire.com/?7yq3wo5yl3odz4k
HTC Espresso Stock Rom (ESPRIMG for 2.1 stock rom)-
http://www.4shared.com/file/OsmF_ZD7/ESPRIMG.html
CM7 Rom for Mytouch 3G Slide-
http://download.cyanogenmod.com/get/update-cm-7.0.3-Slide-signed.zip
Google Apps-
http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip
----------------------------------------------------------------------------
MyTouch 3G Slide Drivers (These Might Help With Failed ADB Connectivity)
http://secure.htc.com/US/support/t-mobile-mytouch-3g-slide/downloads/
http://developer.android.com/sdk/win-usb.html
I pieced this together so I don't take full cred. I know this works because I did it to my phone as I typed it
If this works make sure to post it. Also remember to give thanks. This was not easy to figure out.
problem
what if it says cannot roll back bootloader while espring is updated it says bypassed
It bypasses normally
Why not use ClockWorkMod recovery as update.zip and use that to flash roms and things from there?
Just didn't wanna do it that way
thank you so much for posting this i have been trying to gain root ever since i got my phone which was last year thank you
I cant flash update.zip it keeps saying cant mount sd and when i reboot it says i dont have an sd card i need help im stuck with 2.1 and cant load a rom
not working
Didnt work for me.
superoneclick worked saying i had temporary adb root, then i would run mts rooter and it seems like that when the cmd prompt comes up that it doesnt work.
on the first part it said
"cd: can't cd to /sqlite_stmt_journals"
then after I turn wifi on and the cmd prompt goes again I get:
"./exploid not found" and " secretlol not found"
any help?
one small hiccup
Used these instructions to root a friend's phone last night. There was one deviation we had to deal with:
5. It will look for the ESPRIMG again, after its done you will see the menu. Highlight "Recovery" and press the power button
Click to expand...
Click to collapse
While we could see the menu the phone only gave us the choice to run update (YES) or reboot (NO). Recovery was inaccessible. We ran the update (with the bootloader bypassed) then when asked to reboot we chose (NO) and then could select RECOVERY and follow the steps above.
Yes, we did repeat the UPDATE.ZIP process but this time it did not skip Bootloader. Soon CM7 was up and running.
Hope this helps and thanks for the great instructions.
i need some help my says i dont have sd card when it boots up .Also it wont let me apply the update.zip .it says cant mount /dev/block/mmcblk0
cant find /sdcard/update.zip
Ive already reloaded ESPRIMG aboput 15 times im stuck with a useless phone please help
Also my pc wont recognize my phone so i cant use adb or anything
angelo420 said:
I cant flash update.zip it keeps saying cant mount sd and when i reboot it says i dont have an sd card i need help im stuck with 2.1 and cant load a rom
Click to expand...
Click to collapse
Some sd cards work better than others. Sandisk with a little 4 work great. Try to reformat it with a pc and I think it needs to be Fat32
jasonftfw said:
Didnt work for me.
superoneclick worked saying i had temporary adb root, then i would run mts rooter and it seems like that when the cmd prompt comes up that it doesnt work.
on the first part it said
"cd: can't cd to /sqlite_stmt_journals"
then after I turn wifi on and the cmd prompt goes again I get:
"./exploid not found" and " secretlol not found"
any help?
Click to expand...
Click to collapse
Your pc is not detecting your phone. Try installing HTC Sync from the Mytouch 3Gs support page. Also make sure to run it as an administrator while being logged in on a admin account
I actually rooted mine while placing the phone in SYNC Mode after removing the sync program and pressing back button on phone to have it stop looking for SYNC...Just remove SYNC program from the computer not the drivers for the phone to be recognized.
Your pc is not detecting your phone. Try installing HTC Sync from the Mytouch 3Gs support page. Also make sure to run it as an administrator while being logged in on a admin account
Click to expand...
Click to collapse
I downloaded the htc sync software from htc dot com /us/support/t-mobile-mytouch-3g-slide/downloads/ (xda's settings stop me from submitting a link as this is my first post), I then tried to rerun the SuperOneClick and it failed saying "ADB server is incorrect version" or something similar. I copied the ADB.exe from the HTC Sync app directory into the SuperOneClick, and wham bam it worked. Of course the MT3Rooter failed with the same error, so I repeated the copy and I had root.
Thanks for your help everyone, it is very appreciated by this sorta geek.
PS: As a software geek and a 42 year old jerk, it hurts my heart that XDA has to run such nasty anti-spam settings just to keep crap off this forum. Ends up penalizing the users with good intentions. I totally see why it has to be done, and I support the effort, just is sad that it has to be this way.
how do you achieve s-off though? does downgrading, also downgrade your bootloader?
the goldcard app is not working, the site is down to generate keys.
Insanityrains: I have two stupid questions. Is there something I'm missing here? You don't have consecutive numbers for your instructions. Should I follow them in the order you have posted or in the order of the numbers?
Dumb question 2: Where is the download link for the ESPRIMG.zip file?
Thanks for your instructions! I hope it works for me.
UPDATE
I followed the steps to the letter. It worked seamlessly. Thanks insanityrains for putting all this together and the developer who actually figured this out!! However, few things I had to learn by doing it over and over again:
The first part worked awesome! (i.e. rooting and installing 2.1). It will keep saying there were errors and stuff but keep doing what insanityrains says to do.
The second part (installing CM7 with google apps was the hurdle for me): Follow his numbering in post #1 (once again, I'm refering to the second part) to understand what I'm saying below.
Before you begin, you don't need the ESPRIMG file anymore once you have rooted and installed 2.1 (the first part). So delete that file from the root of your SD card. By doing this, you can skip the annoying wait as it tries to reinstall 2.1 on your phone. Now for the two mistakes I did.
1. The first step was a silly mistake, but very much possible for someone to commit. Just rename the file "update" and dont add ".zip" like I did. Everytime I try installing the ROM it kept saying "cannot locate update.zip". I was scratching my head for a few times before I realized the mistake
2. Step #5. It will search for the ESPRIMG file and it is not going to find that. Select "recovery" then
For noobs, dont freak out while doing it. It was scary for me to root the phone. But once I did it fine, it was fun!
so in order to install roms you have to rename them to update zips?
anybody even here anymore?
theres too many outdated rooting guides on here. i already know i cannot achieve s-off now that we accepted the OTA. i already tried to root and it went fine but the clockwork recovery will not work. also when i boot into the 2.1 rom that i downgraded to i see there is no superuser app but it appears i am rooted because most root apps work minus wireless tether. i just want root and to run a semi stock non cm7 type rooted rom. is this possible with s-on or not?
if so can someone point me in the right direction please?
Worked!!!
Thanks insanityrains. Followed the steps and it worked. I would echo comments re: Menu choice for "Recovery" (see updates with fezmonger and ganjagarn).
Again - thanks!
fixxxer2008 said:
anybody even here anymore?
theres too many outdated rooting guides on here. i already know i cannot achieve s-off now that we accepted the OTA. i already tried to root and it went fine but the clockwork recovery will not work. also when i boot into the 2.1 rom that i downgraded to i see there is no superuser app but it appears i am rooted because most root apps work minus wireless tether. i just want root and to run a semi stock non cm7 type rooted rom. is this possible with s-on or not?
if so can someone point me in the right direction please?
Click to expand...
Click to collapse
I thought someone on here said that you could use clockwork mod but you probably have to put it in, i can't help since I rooted my phone with the original method that was much easier.
Have you tried installing rom manager and letting it flash clockworkmod recovery?
jacewt said:
I thought someone on here said that you could use clockwork mod but you probably have to put it in, i can't help since I rooted my phone with the original method that was much easier.
Have you tried installing rom manager and letting it flash clockworkmod recovery?
Click to expand...
Click to collapse
i was working on it for a client, i gave up. thanks anyways.
Hello guys.
I have purchased U8800 pro two days ago and decided to do some modding here
The phone came with 2.2.2. I managed to root it with SuperOneClick 2.3.
After that I installed CWM 5.0.27 and tried some ICS roms.I liked aurora but I had one problem.When the screen switched off,the phone would reboot after 2,3 seconds....
I recovered via CWM to 2.2.2 and installed the official 2.3.5 rom (build 540g).
I installed 2.3.5 because I have read here in the forums that this rebooting was done because I went straight from 2.2.2 to 4.0.3(don't know if it's true,i'm completely noob).
Anyway,I tried rooting my phone now with 2.3.5 but I can't.
I tried with SuperOneClick(2.2 and 2.3,setted the exploited both to auto and zergRush),with doomlord tool but yet no success.SuperOneClick gets stuck at step 7 and then is says not responding.DoomLord Tool outputs a lot of errors that I don't have permission to write in the filesystem and stuff.
I run both programs with Windows 7 64bit and by right click and run as admin.
Still no success.Tried to restore to factory defaults (with 2.3.5 still there) but yet again the programs don't work).
Of course i have enabled usb debugging,turned log switch one,dump & log turned all on options,enabled non market applications to install....the usual stuff I found in the guides here but still I can't root it.
Also the pink screen no longer works.With 2.2.2 I was able to replace the recovery img and get CWM,but after 2.3.5 the computer no longer finds the phone when in pink screen mode.I also tried all of the above in a laptop with windows 7 64bit.
All drivers installed and updated according to device manager.
Well guys? What can I do? Is is a good idea to try to revert back to 2.2.2 and root from there? I really want my U8800 Pro to have an ICS
Anyway,sorry for the long post.
Hope you can help me.Thanks in advance!
Hi,
I think you flashed the B540 ROM. Flash B512 (yes, you can downgrade; there's no block) and you'll be able to use the pink screen mode (and zergRush will also work)
EDIT: Glad to hear it worked!
Do I follow the same procedure as the one I followed to upgrade to 2.3 from 2.2?
(the step 1,step 2 folders ->dload folder in internal sd with update.app and update_g.app etc etc)?
edit: it seems that the procedure is the same.downgrading right now and I will post the results
edit2: You are the best qwerty12!!!
Thank you very very very much sir!!!!!!!!!!!!! You are awesome! I finally rooted my phone with superoneclick 2.3 and zergRush exploit selected.
Thanks again!
i have official gingerbread 2.3.5.
i want to root my phone but no method works.
when i follow steps indicated to use superoneclick, the program goes on till step 7 and then stops responding.
i have tried one click root but makes issue of driver. i have installed drivers from many places, even from where the one click program states. still no success.
when i try to use the boot.img method, i cant do it because when after the pressing the keys to enter the pink screen, when i connect it to the pc, no drive shows up into the computer so i cant copy the boot.img file.
i dont know what is the problem. No rooting method is working.
by the way i have installed wondershare mobilego software for android on pc.(Do you think this could make a problem). And on my phone i am using go launcher(Do you think this is making problem). By the way my phone randomly restarts and shutsdown (the reason why i am switching to cyanogen mod). Do you think i should first again do a clean install of gingerbread then do all this rooting and flashing of cyanogen. Please respond quickly.
(If there is a problem of drivers, kinldy post the link that HAS the drivers in it that will allow me to root)
A big thanks in advance!
Did you try with Z4root? I think it works well on Gingerbread. You can try to "downgrade" to your stock rom and then update to GB.
grrrMAN said:
i have official gingerbread 2.3.5.
i want to root my phone but no method works.
when i follow steps indicated to use superoneclick, the program goes on till step 7 and then stops responding.
i have tried one click root but makes issue of driver. i have installed drivers from many places, even from where the one click program states. still no success.
when i try to use the boot.img method, i cant do it because when after the pressing the keys to enter the pink screen, when i connect it to the pc, no drive shows up into the computer so i cant copy the boot.img file.
i dont know what is the problem. No rooting method is working.
by the way i have installed wondershare mobilego software for android on pc.(Do you think this could make a problem). And on my phone i am using go launcher(Do you think this is making problem). By the way my phone randomly restarts and shutsdown (the reason why i am switching to cyanogen mod). Do you think i should first again do a clean install of gingerbread then do all this rooting and flashing of cyanogen. Please respond quickly.
(If there is a problem of drivers, kinldy post the link that HAS the drivers in it that will allow me to root)
A big thanks in advance!
Click to expand...
Click to collapse
I had this problem with SuperOneClick. Happens because all steps are not done properly. Make sure you do all steps and before using SuperOneclick make sure you reboot your phone.
If that doesn't work then PM me and I will send you proper steps.
Good Luck.:good:
grrrMAN said:
i have official gingerbread 2.3.5.
i want to root my phone but no method works.
when i follow steps indicated to use superoneclick, the program goes on till step 7 and then stops responding.
i have tried one click root but makes issue of driver. i have installed drivers from many places, even from where the one click program states. still no success.
when i try to use the boot.img method, i cant do it because when after the pressing the keys to enter the pink screen, when i connect it to the pc, no drive shows up into the computer so i cant copy the boot.img file.
i dont know what is the problem. No rooting method is working.
by the way i have installed wondershare mobilego software for android on pc.(Do you think this could make a problem). And on my phone i am using go launcher(Do you think this is making problem). By the way my phone randomly restarts and shutsdown (the reason why i am switching to cyanogen mod). Do you think i should first again do a clean install of gingerbread then do all this rooting and flashing of cyanogen. Please respond quickly.
(If there is a problem of drivers, kinldy post the link that HAS the drivers in it that will allow me to root)
A big thanks in advance!
Click to expand...
Click to collapse
I had exactly same problem before, make sure that you have ADB drivers installed before using SuperOneClick
after I installed ADB i rooted my phone whitout any problem