Hi I've been reading these forums for ages but only just signed up, I'm looking to root my hero (surprise) and complete newb.
Basically current build/software is 3.32.405.1 so 2.1, followed the rooting instructions exactly, then rebooted holding home and power on buttons but it just boots straight into a red triangle with exclamation mark in the middle of it, I can hold power and volume up to get a small menu with apply sdcard: update but tried that after getting frustrated and that said that the file wasn't verified.
how do I get the normal recovery screen because already have a villainrom on the sdcard.
You need to do the root process to get to the care bear, then flash villainrom on the care bear, before rebooting.
That will get you sorted
Well I rooted using universal androot, then used the teminal to input the su (press enter)
flash_image recovery /sdcard/recovery.img (press enter) part of instructions but at no point do I see the care bear :S
I have the same problem as Ejen. The phone is root i have superuser permission i do titanium backup .I put RA-hero-v1.7.0.1 with Better Terminal Emulator. When I turn off phone and press Home&Power I get a picture phone with a triangle. Does anyone have an idea how to solve this?
Yes, this is because stock rom automatically reflashes recovery with the stock one each shutdown iirc.
You need to stop this happening, but I can't remember the command. When you have root using universal androot though, you can stop it happening.
Or maybe it's too early for me. Wait till I've had a coffee or two and I'll revisit this...
Perhaps you can edit /system/etc/install-recovery.sh. A quick look trough /system didn't find anything like a shutdown script so perhaps this file is run by the android environment.
I had this same issue the other night, been searching for a fix, hopefully one appears here soon, thanks Pulser_g2, i was hoping to install your 1.5 Rom
Bloke
Ah seems I'm not the only one well at least I wasn't just being silly then, well tried it multiple times but still seem to have no success even tried the unlockr websites method with no success either.
If anyone knows thanks
Right... Are you on 1.5 or 2.1 just now?
Could someone (preferably the most tech savvy here) if you're on 2.1, try http://forum.xda-developers.com/showthread.php?t=726118 and see if that works.
I'm trying to work out what's going on here...
P
I'm 2.1 and had been using your other guide to root my phone but embarrasingly got stuck at stage 2 whilst trying to set up ADB (my knowledge of cmd is very limited to the point I only know the command tree ), saw the guide on XDA and thought that looks really simple so tried that instead, then tried unlockr method when XDA's didn't work now given up and asked for help
Ejen said:
I'm 2.1 and had been using your other guide to root my phone but embarrasingly got stuck at stage 2 whilst trying to set up ADB (my knowledge of cmd is very limited to the point I only know the command tree ), saw the guide on XDA and thought that looks really simple so tried that instead, then tried unlockr method when XDA's didn't work now given up and asked for help
Click to expand...
Click to collapse
Ok,... So how far did you get on setting up adb http://www.villainrom.co.uk/forum/s...de-Setting-up-ADB-and-how-to-use-it.-(Windows) ?
I had done up to part 4 using ADB, opened up cmd prompt I couldn't seem to push stuff to the SD card and was unsure what I did wrong.
When checking the USB works part 3, I used the link chose part 2, HTC sync users > ADB I couldn't find android_winusb when updating the driver software. I'm probably missing something or being silly now but I don't know
Ejen said:
I had done up to part 4 using ADB, opened up cmd prompt I couldn't seem to push stuff to the SD card and was unsure what I did wrong.
When checking the USB works part 3, I used the link chose part 2, HTC sync users > ADB I couldn't find android_winusb when updating the driver software. I'm probably missing something or being silly now but I don't know
Click to expand...
Click to collapse
Type adb devices, and if you see your phone's serial number, then you don't need to worry about drivers. Remember to "cd" into the correct folder first.
I'll try that but CD did nothing I'm running windows 7 and it sticks on C:\users\username Can't go back
Ejen said:
I'll try that but CD did nothing I'm running windows 7 and it sticks on C:\users\username Can't go back
Click to expand...
Click to collapse
Where have you downloaded your Android SDK too?
for example > "cd c:\SDK\tools"
pulser_g2 said:
Right... Are you on 1.5 or 2.1 just now?
Could someone (preferably the most tech savvy here) if you're on 2.1, try VillainROM Roots 2.1 and see if that works.
I'm trying to work out what's going on here...
P
Click to expand...
Click to collapse
I guess that is already on the phone RA-hero-v1.7.0.1 as you said stock rom automatically reflashes recovery. I suppose that the method VillainROM Roots 2.1contains RA-hero-v1.6.2.img. What will then happen with recovery if i try to do again root with VillainROM Roots 2.1?
When you try that method, you get the phone booted into patched recovery, at which point you take a nandroid backup and flash a custom ROM.
this prevents the recovery being lost. Just try it
I'm not at home and can not install ADB and run runindos.bat. I have on SD card recovery and FroydVillain 1.5. That's why I tried this method.Next week I'll be home and if someone does not fix the problem i will try the method you suggested me.
Can I try to put again recovery with Better Terminal Emulator, maybe recovery was corrupted ....
i went through the same thing!!
Ejen said:
Hi I've been reading these forums for ages but only just signed up, I'm looking to root my hero (surprise) and complete newb.
Basically current build/software is 3.32.405.1 so 2.1, followed the rooting instructions exactly, then rebooted holding home and power on buttons but it just boots straight into a red triangle with exclamation mark in the middle of it, I can hold power and volume up to get a small menu with apply sdcard: update but tried that after getting frustrated and that said that the file wasn't verified.
how do I get the normal recovery screen because already have a villainrom on the sdcard.
Click to expand...
Click to collapse
helloo!! i apologise if i am interupting or butting in whilst your in the middle of other solutions... i just saw the title and jump right in. i went through the exact same thing just 2 weeks ago!! unfortunately for me there was no successful forums or websites at the time... it sounded like a simple problem, with no simple solution.
this may not be what you where looking for, but its a very quick easy method that definately worth a try.
so... am i right in saying you have the official OTA HTC android 2.1 update?? and you now want to get this rooted?? and have you also tried rooting using the two common methods, the "one click root" and the "unrevoked" one? thats wat i did and i kept being stuck at the same red triangle and exclamation mark.
those methods (and countless others) will not work with the official htc hero android 2.1. (as far as i know) what you will need to do is downgrade the phones software. check htc's website and look for the older RUU and using the computer get your hero back to android 1.5. (under no circumstance should you upgrade your 1.5 android to the 2.1 android via HTC's OTA update... its only going the remove the root access!!!! - always reject it)
then continue to root as per the numerous rooting guides. done? now, obviously you will want to flash an android 2.1 rom. if you want to keep to htc's original 2.1, you can search for this in the forums under 'development'. or go ahead and flash the custom roms (villianrom).
thats exactly how i did it. im not entirely sure if this is the info you are after... but reply back and ill be happy to answer any query - big or small. (i should warn you, im no expert - but this forum is filled with the earths most powerful brains - u should have an answer in no time!!)
I have an HTC Hero. I ran the simple root method and got Carebare response.
I too have read numerous threads in the forum here and elsewhere but can't seem to get past the USB section.
adb says no device
I can use HTC Sync to sync data to the phone.
The SDK is installed and I have previously used it to capture screen shots of my device.
If I try to run one of the RUU executables, it fails with a [114: USB Error] (number may be wrong but the message is right.
I can mount the SD card and copy files to/from it.
I am running Windows 7 Home Premium 64bit on a Quad Core AMD CPU.
If I do the Home/Power thing, I get the same red triangle as described in the 1st message of this thread.
Fwiw, I have successfully and repeated loaded ROM's on my previous phone (HTC S621) so I am not a complete newb (but i am newb to Android).
What am I missing? This shouldn't be this hard (at least from what I've seen posted anyway)
Related
***********Don't follow this method**************
THIS is what you want to do. This thread is an older method.
Do this at your own risk!!!....I'm by no means an expert on this. In fact it's the first time I have done this. There are probably tons of guide to doing this on the T-Mobile version but I made this to help people with the Canadian Rogers G1. So it only applies to that specific phone. This is also expecting you be using Windows (I use XP but Vista will work but I don't know where the command prompt is found....google it if it isn't in the usual spot). Also the commands would be the same using a Mac but yet again I don't know what or where the equivalent of windows command prompt would be found on a Mac.
First off you need the Android SDK which you can get from here (http://developer.android.com/sdk/1.5_r2/index.html).
Unzip the folder inside the .zip file to C:\Android so the final resulting file structure will look like C:\Android\android-sdk-windows-1.5_r2\
Now do the steps 2 and 3 found here http://developer.android.com/guide/developing/device.html
I have cut and pasted these steps here but if you are using a mac you may need to refer to the link. Actually refer to it anyways in case I missed something.
**************** Steps 2 and 3 *********************
Turn on "USB Debugging" on your device.
On the device, go to the home screen, press MENU, select Applications > Development, then enable USB debugging.
Setup your system to detect your device.
If you're developing on 32-bit Windows, you need to install the 32-bit USB driver for adb. The USB driver is included in the SDK package. To install it, follow these steps:
1.Connect your Android device via USB. When the Found New Hardware Wizard appears, you'll be asked if you'd like Windows Update to search for software. Select No, not this time and click Next.
2.Select Install from a list or specified location and click Next.
3.Select Search for the best driver in these locations. Browse to the usb_driver/x86 in the SDK package (<sdk>\usb_driver\x86).
4.Click Finish. The system should install the driver files as necessary. Your machine may require a reboot.
********************************************
Plug your USB cord into your phone and plug the USB cord into your computer.
Open a command prompt in windows by going to Start/Run and then type cmd. You should a dos like window open up. Now navigate to the directory C:\Android\android-sdk-windows-1.5_r2\tools
Type “adb devices” to confirm USB Debugging is turned on
Keep the command prompt open for later use
Get fastboot from here (http://www.htc.com/www/support/android/adp.html) and put it in the tools section of the SDK
Get these files http://drop.io/ii4t2ax and put them in the tools section of the SDK. Mount your sd card so you can copy update.zip to the root of your sd card.
Turn off your phone and then press the camera button and the power on button so it loads up to fastboot mode (or whatever it is called..lol). Once it gets to the screen with 3 androids on skateboards on the bottom you should press the “call” button to the farthest left. It should go to another screen that says “FASTBOOT USB”. If it only says “FASTBOOT” then you gotta plug in the USB cable which you should have left plugged in if ya followed the steps properly .
Now in the command prompt you need to type “fastboot boot recovery.img” don't touch your phone tile it gets to a new choice of menus in recovery mode. Once it gets there you should make a nandroid backup. I really urge you to make the backup. Make sure there is space left on your SD card.
So follow the menus and press the button combination to make the back up and once that is done press the other button combination to apply the update.zip file....Do not touch your phone at all....I'll cut and paste what Haykuro's directions were on this part to emphasize the importance of not touching anything....
(LET IT FINISH, DO NOT TOUCH ANYTHING UNTIL YOUR PHONE IS COMPLETELY IDLE. DO NOT TOUCH AFTER FIRST REBOOT (WHEN CHIP APPEARS) UNLESS YOU LIKE A BRICK. )
Mine didn't take very long but if it does still do not touch anything. Please....just don't!
Once it is done press HOME+BACK to reboot the phone out of recovery mode.
Power off your phone and then press the camera button while pressing the power on button to go back to the fastboot menu. Press the “call” button (to the farthest left remember!) so you see it say “FASTBOOT USB”. Once again...If it only says “FASTBOOT” then you gotta plug in the USB cable which you should have left plugged in if ya followed the steps properly .
In the command prompt which you should have left open for convenience you have to type “fastboot flash boot boot.img”
Then type “fastboot flash recovery recovery.img”
Then type “fastboot reboot”
At this point you basically have root but you need to change permissions on a file that need to be on the phone so everything works as your would expect with root
Turn the phone on to be on the operating system.
Type “adb root” in the command prompt to confirm you have root access
Download this file http://www.magicandroidapps.com/su.zip
Unzip the file to the tools folder of the SDK
In the command prompt type “adb remount”
Then type “adb push su /system/bin/su”
Then type “adb shell” and you should get prompted with a # symbol
Type “chown root.shell /system/bin/su” right after the # symbol
Then type “chmod 6755 /system/bin/su”
That should be it...try running the market enabler or SetCPU which you can get here http://forum.xda-developers.com/showthread.php?t=505419
If they work then you have root....currently you CANNOT use any of the custom roms because they were made for T-Mobile versions of the G1. I'm waiting for conversions of these roms myself so have fun waiting just like me. This is the first time I have ever hacked/rooted any phone so be sure to research stuff yourself...I might have things wrong. Who knows....it's all a risk just like I took when I decided to try it without having a step by step guide to read from.
Remember guys...I JUST wrote this so be sure to read it the whole way through before jumping into things. Post problems you run into here so I can fine tune it.
so you managed to root the rogers G1?? great job!! did you figure this out yourself???
no...Haykuro did this. I just took all the available information and put it in order to help others do it. It was all in this thread here http://forum.xda-developers.com/showthread.php?t=522127
Can we get a tutorial of how to flash a new rom now I really want to try out the new hero rom.
there are currently no compatible roms. Cyanogen would like to port his ROMto the rogers version but he doesn't have a rogers phone to test with. Hopefully we would not need to buy him a whole phone just to port his ROM....if he employed a bunch of testers to help him he might be able to do it. I really don't know what he requires to do this though. I'm sure we will get some compatible roms soon. Maybe some of the roms do work....pretty early in the game to know what works and what doesn't. I've personally been having a great time ever since I bought this phone just reading about it, watching things happen and tinkering with things. I can just imagine how Haykuro feels being the one to make this happen. I need a compatible ROM to go further though.
XwXDv8XwX said:
there are currently no compatible roms. Cyanogen would like to port his ROMto the rogers version but he doesn't have a rogers phone to test with. Hopefully we would not need to buy him a whole phone just to port his ROM....if he employed a bunch of testers to help him he might be able to do it. I really don't know what he requires to do this though. I'm sure we will get some compatible roms soon. Maybe some of the roms do work....pretty early in the game to know what works and what doesn't. I've personally been having a great time ever since I bought this phone just reading about it, watching things happen and tinkering with things. I can just imagine how Haykuro feels being the one to make this happen. I need a compatible ROM to go further though.
Click to expand...
Click to collapse
Is Haykuro working with Cyanogen? Man I just want to play with the Rogers Rom. Oh well I guess I'll settle for getting rid of the Rogers crap and being able to buy stuff on the Market finally.
Yep, I made a 3.6 for the Rogers Dream. I haven't actually tested it because I don't have one, but I used Haykuro's tools to build the boot image. Let me know if it works for you guys!
Holy...where is that at? lol
My wife has gotta get her ass home with my phone damnit! lol
http://forum.xda-developers.com/showthread.php?t=518851
lol, I just finished restoring my phone too. Oh well I am downloading your files now cyanogen, here's to hoping I don't brick my phone on my first flash attempt.
Can someone point me to a guide to flash this rom to my phone?
XwXDv8XwX said:
Can someone point me to a guide to flash this rom to my phone?
Click to expand...
Click to collapse
After you have rooted, copy the file to your sdcard as "update.zip", boot into the new recovery mode, wipe your data if you are coming from the stock build, then flash the update! The first boot will take a bit longer than usual. Check my thread for a FAQ.
Just wanted to say "Thank You" I have been following the threads in the background for the better part of a week, and was hesitant to give it a shot as I am not too sharp on dealing with dos boxes. However followed it along and everything went off perfect, grabbed set CPU and installed it and works. So I guess I have root. Not really sure what I can do with root, but will look forward to browsing around and seeing what is cool.
The big thing is I want to be able to flash new roms. So I guess this is the first step in doing that. (already actively flash PPC roms on the Hermes)
Again thanks for everyones work on this.
well here it goes....it'll be the first time I ever flashed a new rom to my phone...at least I know some other people have tested this version of cyan's rom so I feel pretty safe doing this. I would just send it back and pretend I don't know what's wrong with my phone if I did brick it but things seem to be going pretty smooth so far.
I wonder if Cyanogen meant to wipe date first or after I applied the update.zip.....I figure he meant to wipe after I apply the update since the update was on the sdcard so I would not be able to apply an update I wiped off the sdcard. It's taking longer to boot up like he said so hopefully that's a good sign. I did just remember there were a few pics I would have prefered to save...lol....oh well.
XwXDv8XwX said:
I wonder if Cyanogen meant to wipe date first or after I applied the update.zip.....I figure he meant to wipe after I apply the update since the update was on the sdcard so I would not be able to apply an update I wiped off the sdcard. It's taking longer to boot up like he said so hopefully that's a good sign. I did just remember there were a few pics I would have prefered to save...lol....oh well.
Click to expand...
Click to collapse
No, you wipe before the update. Wiping doesn't erase your SD card, only the internal data partition.
Also, my ROM is a "Google" based ROM. You'll have to sacrifice the spiffy HTC dialer and Exchange support, but I include all the other HTC apps.
How's your flash going XwXDv8XwX? I tried, but was stuck on the Rogers screen for more than 10 minutes. I rebooted the phone and tried again using the "adb logcat" command to try and see what my phone is doing but as soon as it restarted I stopped getting stats. Is this like a 20-30 minute setup process perhaps?
This is taking ALOT longer than usual. It's staying at the rogers logo right now....how bad is this?
im following the walkthrough from stock 1.5 to 2.1 rooted and i just did step 1 where i load the PB00IMG.zip. when i turned my phone back on it asked me to login to gmail and all that stuff and now when i check the phone info it says i'm running 2.1 already even though i have not gone through the other steps? i assume i still need to? and am i supposed to be on 2.1 already after step 1? i was just under the impression that i would have 2.1 still the very end?
i also saw that there was a new thread that had a new eris official .zip should i use that one? or the one mentioned in the walthrough?
yes you should be on 2.1 after the first step but you do need to continue on with the other steps. you can use erisofficial.zip or the one in the post or any of the roms that have now been made for the rooted eris. there are quite a few choices in roms now so you can look through them and see which one appeals most to you....
Ok. I am having trouble with step 3... not sure how to get the common prompt to go to the sdk tools folder so I can start inputing the lines? I'm new so any help would be great. also... what is going to be the difference between the 2.1 I have running now and the one that would be flashed in the last step? I have a Droid and am doing this for my wife. is step 3 pretty much like making a nandroid backup?
Go to My Computer and ( C: ). Find your AndroidSDK folder and keep going until you are in your tools folder. Right click on any item and go to Properties. Under your Command Prompt type cd (followed by a space and type whatever it says next to Location in Properties). Hope this helps.
For me, in my cmd I type: cd C:\AndroidSDK\android-sdk-windows\tools
After you hit enter, it should have C:\AndroidSDK\android-sdk-windows\tools (or whatever your path is) followed by a cursor. Now you can type your commands.
Ok Ill try that when I get back home. just curious though... what would happen if I jusT stopped after step 1 with the 2.1 that's on the phone now?
I left it right there for about a week. I didn't have time to finish the rest. Nothing bad will happen, you just won't be able to flash custom ROMs or other root-related things. You still have 2.1 and you can download apps that you couldn't with 1.5. If you're content with that, you may be better off just doing the OTA leak instead.
The roms have fixed alot of the glitches in the original 2.1 root that you have on there now such as having to log in to gmail after each reboot.
i get to the last part of running the commands and the i get errors saying out of memory???
it ran through the errors a bunch and the very end it says error writing recovery: no space left on device...? after doing step 1 i used mybackup pro to re load all my wifes texts... all 8000 of them... could that be the reason?
ok i ran through the steps and didnt get an error this time... but how do i know if it worked?
yamaha83 said:
ok i ran through the steps and didnt get an error this time... but how do i know if it worked?
Click to expand...
Click to collapse
power down your device, then while pressing the end/power button and volume up at the same time and you should come into the recovery menu. From there you can flash updates, roms etc. you can back up your current config all sorts of things.
So I have not been able to check if I flashed the recovery correctly yet cuz my wife had to go out of town. but now she can't send pic messages. is this one of the fixes in some of the roms? Also now that I have root I should be able to back up all her data and apps to restore them onto a new Rom right? Just want to make sure its the same as my Droid...
I'm in the from stock 1.5 to rooted 2.1 thread and everytime I try the command:
adb shell flash_image recovery /sdcard/recovery.img
I get:
flash_image: permission denied
Any help is appreciated as I'm coming form the vogue android forum and this is getting a little foreign to me
EDIT: I'm assuming i'm retarded and forgot to run the command before it.. I just ran through it again with nothing denied
Up and running good!! Thanks for the help everyone!
Anyone have any suggestions on a good stable Rom??
I've been using Jamezelle's Sense-able 2.0. I've tried the others, this one is most stable in my opinion. I'm waiting for the EvilEris 1.2 to come out to try that.
Sorry to be a hassle, but I just can't figure this out!!
I've rooted my phone with the "new clarified method" thread, gotten to the clockwork mod and everything, but once I've done that I just cannot get the Unrevoked 2 to work. I've tried it on Windows 7, xp, and osx, and nothing seems to work! The main issue I'm getting is that it'll do the whole process, and then I think it says "reboot to recovery" and then I just get that old phone with a red triangle error. What could I possibly be doing wrong??? It can't be driver issues, because doesn't OSX do that automatically?
I had a similar issue on windows 7 and a simple pc reboot seemed to work for me.
Nope, still no luck. Am I supposed to put these Reflash files on the phone somewhere? I just feel like I'm missing some big step or something. Why is there no good tutorial on this process yet?
Oh my god I think I'm going to go insane! Please someone, point me in the right direction! I have done this hundreds of times now, I'm gonna die. All I can get is "Done!" and then my phone is showing me a big dumb red exclamation point triangle thingy. What am I doing wrong??????
Was I supposed to do something once I first reached the clockwork on my initial root? Cuz all I did was reboot to OS. I don't know if anybody can tell, but I'm kinda desperate. hah
Did you make sure that the phone is recongized in the device manager once plugged in? Need to help us out tell me what you have done so far? Did you install the SDK USB Drivers?
when at the command prompt, did you type adb devices? Does your device show up as connected?
larry996 said:
Did you make sure that the phone is recongized in the device manager once plugged in? Need to help us out tell me what you have done so far? Did you install the SDK USB Drivers?
when at the command prompt, did you type adb devices? Does your device show up as connected?
Click to expand...
Click to collapse
I was having the same problem also until I ran reflash.exe and the command prompt both as admin. I also reran Android SDK installing all of the updates. After plugging in the phone, the SDK picked up two more updates, one of which was USB drivers. Once I did that, things seemed to have worked.
Use attn1's method. The clarified method didnt work for me properly.
I assume you never flashed a rooted rom after reaching clockwork mod. If not the phone is not yet rooted. You have to get back to clockwork recovery and flash a rooted rom (either attn1's liberated one or his stock rooted rom). Both found in his liberated thread. Then set up all the drivers for unrevoked and run it. It should work then.
When my phone is just sitting in bootloader, it is not recognized by adb devices.
You have to go through the whole loop process again booting your phone into recovery and connecting the usb cable.
gdeadfan said:
When my phone is just sitting in bootloader, it is not recognized by adb devices.
Click to expand...
Click to collapse
Thats not good, try reformatting your sd card on your pc with an external reader not with your phone and try again. I'm almost certain it needs to be recognized by adb devices when in bootloader.
Just managed to install the Liberated beta ROM, but now unrevoked can't even get past superuser privelages. it's not popping up anymore
Nevermind, it gets past superuser now, but now it just says "waiting for reboot" and completely reboots the phone to the point at which i can use it regularly
Have you installed the hboot drivers?
Re-ran unrevoked?
Edit: Does it reach "done!"?
Yes, yes, and yes. And my phone just keeps getting to the red triangle. doesn't make any sense to me! And at this point, I'm positive I have no drivers getting in the way like Sync etc., and I'm sure HBoot is installed correctly.
Go to the android market and download titanium backup. It requires root so if it installs we know that you are at least rooted.
Try this, because I had the same problem. Go into device manager with Revoked2 says waiting for reboot. Look under devices above my computer or below cant remember and right click uninstall and remove the android device. reboot your computer then see if it installs are does it automatically, if not don't do anything just plug the phone in and get to hboot/ red triangle screen, then try revoked2 again. This finally got loop to read my device then when I got to clockwork I loaded "liberated rom"
Screw revoked2, just get to clockwork recovery and have liberated rom on your SD card ready to go. Then after install I ran revoked2 for clockwork mod.
Good Luck
Please avoid creating new threads for existing topics. Before creating a new post or thread, you should read all available information in the many Aria rooting threads.
Thank you for your understanding and cooperation as we work to organize the Aria forums.
Hey guys.
I've been attempting this all morning and so far I've had no luck. I have a VodafoneAU Legend which I updated to the official 2.2 yesterday. But now I want to try root.
I've been trying to follow the HBOOT 1.01 guide but there's a few problems. First, I cannot connect to the phone with adb unless it's in htc sync mode. No other mode will work. So when it's time to copy testimage.zip to the card I have to change from sync mode to disk mode, whereby adb loses it's connection. What do I do about this? Is it a driver problem (in Win7 here) or something else?
Thanks,
Dave.
Ok, the first problem were drivers.
Now I can't finish the second guide. When I try using clockwork to install the firmware.zip, the phone just boots to the red triangle. What do I have to do?
Dave.
So I pressed the up button/power combo at the red triangle and get the Android system recovery. Selecting "apply update.zip" says it can't verify. What do I do? Is this guide for my phone or do I need to follow something else?
I don't understand this guys. Anyone help? I'm thinking since this is a step to root the phone, I'm not actually rooted yet so I can't use the clockworkmod? Then what is the guide for? The guides at unlockr don't mention what firmware/hboot they work for so I'm not keen to try them yet.
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
whitetigerdk said:
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
Click to expand...
Click to collapse
But isn't that what Rom Manager does? Download the update.zip then run it? Man this is getting even harder to understand.
Edit: And this is left out of the HBOOT 1.01 guide because.....????? When I work this out I'll write a PROPPER guide, lol.
Just checked and update.zip is on the card.
So which part of the guide am I getting wrong?
Decided to reinstall phone with the official froyo release and am now ready to try this again. Is there anyone that will walk me through the process? I will write a complete guide if the "gotchas" are still there.
i feel for you ... hope you get it fixed... thats one of the reason i havent dared messing with the phone because i've seen a few post like yours where something didnt go quite as described... for whatever reason... and im sure the answer is out there but just not within the guide instructions... i guess there is no way to gather all gotchas because there are so many environment variables...
good luck
and please share your technique
Just saw gobczak's thread in the developer forum having similar troubles with Vodafone UK phone, getting the red triangle at reboot. I'll keep an eye on his thread and see how he goes with it.
Did you run the stage1 and stage2 bats while in recovery?
dezzadk said:
Did you run the stage1 and stage2 bats while in recovery?
Click to expand...
Click to collapse
No because the guide didn't say to.
The thing is it seems I'm only stuck on the part where the firmware.zip file has to be flashed. The guide says to use clockworkmod for this. But when I try installing the clockworkmod recovery it gives some file verification error. Isn't there ways to do this via the pc, either through those batch files, adb etc? Or will that fake-flash update.zip file work?
jabbado said:
No because the guide didn't say to.
Click to expand...
Click to collapse
As I just posted on the other forum, I think you need to skip that step in guide 2 and go straight onto guide 3 after you have flashed the LEGEIMG.zip, rebooted, and then removed LEGEIMG.zip from the SD card.
Guys I've got to the point of downgrading to 1.31. But when I run the first batch file it just hangs at the "Writing zip" part, with the htc logo on the screen. Is there any way to fix this?
Can someone please explain this part of the guide:
Phone will reboot and find LEGEIMG.zip on your sdcard, copy it into RAM and check it. If you get CID error at this point, then you don't have goldcard.
Click to expand...
Click to collapse
Ok, so I don't get an error. I get nothing. The phone just boots to the fastboot screen. If I press the power button it goes to the hboot screen and I can see the messages of loading LEGEIMG.zip. But the guide doesn't say to press anything.
So should I or shouldn't I press the power button? Also, if I try making the goldcard again, at which point in the guide do I start from again? The entire process or just copying LEGEIMG.zip to card then rebooting phone? I mean, will all the other things like flashing misc1-2.img still be there?
Guys I finally got this working.
The first problem was with the goldcards. For whatever reason formatting them with the win7 format tool just wouldn't work. I had to use the command-line format tool, setting the block size etc manually.
The second problem was the unnecessary steps in the guide. A few people helped me out with this (namely blackbart at the Aus Whirlpool forum), but basically in the second step you can stop after flashing the LEGEIMG.zip. The updating froyo part isn't needed - for my phone anyway.
Then when running the batch files in the third part, for whatever reason the first batch would keep hanging at 'writing zip...' and I needed to remove the battery to unfreeze the phone. flannigan, also from the Aus Whirlpool forums suggested to just go on to the second batch file. This worked!
So my Legend is now finally a true Legend
Anyway, thanks for the help everyone - couldn't have done this by myself.
Dave
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 / Stock Froyo to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Sent from my HTC Legend using XDA App
EpicSauce said:
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Click to expand...
Click to collapse
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Sounds good! Happy to help and add my 20c worth along the way. The existing guide has got the meaty bits, a new guide would cull the stuff not relevant, help fill in the gaps and alert to the pitfalls we've fallen into.
jabbado said:
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Click to expand...
Click to collapse
I agree... i've done my reading since june of last year but then didnt check for another 4 months... and so many how to's pop up with various ways of doing it depeding on the situation... a lot of those howtos were consolidated howtos which sometimes make intermediate steps unenecessary (may be in some cases causes more head aches since it didnt take into considerations on newer version of hboots...etc)... an updated how to will be much appreciated...
And you're right the most important pre requirement is to have a safety net ... so starting with how to create a back up in case you screw it up is a must!
but im glad it worked out for you!
Ok so found by mistake but will help ones with no sd slot to make goldcard
Ok so first dl. Superoneclick root then the auto rooter for 2.1 will let u know what its called later(ultra easy rooter)
Next 1a.open super1click and ulter easy rooter
2a.in super1click do the shell root
3a.the run ulter easy rooter,once finished u will be at the fastboot screen
4a.click fast boot to go to boot loader screen and then hit vol up to update"esrpimg" once that is done u will be back to 2.1.
5a.once the phone has loaded back up to 2.1 and root just go to recovery and load a rom
NOTE: put update.zip on root of sd so u can load cwm other wish u only get root
AND sry still no way to get soff....
HOPE that is better........for the pickie ones
That is by far the longest run on sentence ive ever seen. You should edit and complete your thoughts. As well as add info on to what your actually explaining. Such as a complete history of the problem. And links to the original related post.
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App
Is this just another root method or will this also downgrade H-Boot, allowing someone to achieve S-Off after downgrading from 2.2 and H-Boot 1.0+
Your phone info in your sig says that your mytouch slide is S-Off'd. If it's true that you can achieve S-Off using this method, that would be huge news.
From what I have tryed alparev does not get soff when I did the downgrade all got changed buttbut the bootloader and the hboot will not allow me to get soff so so far no luck
the hoboot i have after downgrade is hboot 1.02.0000
now i dont know what the old hboot was so if anyone knows plz let me know so I can try to push it sum how
Thats sig is because I have muti slides so plz don't mistake it for what I'm posting now all this was tryed on new slide with 2.2.1
Has anyone ever tested this? I don't have a MT3GS anymore but this seems like a pretty awesome and pain free process to gain root.
I would also like to know if this works?
Yes it does work have done it muti times just to check and check YES it works.....
YES this surprisingly does work. The only problem I had was that the update file wasn't on my SD card so I continued to get a signature filed message when I tried to update. All I did was to copy the file from the mtg rooter fille over to my SD card and ran the update and it worked perfectly. I'm rooted and very happy!
Had to get my slide replaced and the new one came with 2.2.1. I used this method and it got me back to a rooted 2.1 state just like it says. Thanks for coming up with this one.
Really quick and easy! Thanks so much. Too bad T-Mobile is shipping these with 2.2.1 on them, no more S-Off...
Outstanding! Thanks for the tip. Worked flawlessly.
This would be awesome if there were links to where to download everything so someone doesn't download the wrong thing by mistake
important links
I agree with the last post ... links are critical here. This was the easiest rooting process I have ever encountered. Below are links left out by OP. Follow OP's instructions with these files and you'll be rooted quickly and painlessly.
super one click (v1.7 worked flawlessly for me)
http://forum.xda-developers.com/attachment.php?attachmentid=526223&d=1298565480
ultra easy rooter (mt3gslide specific)
http://www.fileserve.com/file/y8yFvWb
This method should be the new rooting method for folks receiving replacement or new slides with 2.2. This should, IMO, be in development.
Thank god for this method. My phone up and died and the replacement came with 2.2.1. I tried a few other methods that failed. This one worked like a charm.
nice
wish i would have stopped back here would have saved me from having to downgrade, root, then upgrade back too 2.2 smh.... lol but nice to know yeah!!!!
Very helpful
I am going to try this method soon. Do we need anything else other than those two files to get our phones operational again? I want to try cm7 nightly, but want to make sure the phone would work before trying to put on another rom.
dudas
hello friends xda congratulate you for helping and answering all our Unknowns but I wanted to ask for help with root touch me slide my'm total newbie at this and am having problems with the root of my phone if I do not understand and this is the only place to do this is here and we wanted to have some aid perire video on how to do it : Confused:: Confused:
crazygerz said:
hello friends xda congratulate you for helping and answering all our Unknowns but I wanted to ask for help with root touch me slide my'm total newbie at this and am having problems with the root of my phone if I do not understand and this is the only place to do this is here and we wanted to have some aid perire video on how to do it : Confused:: Confused:
Click to expand...
Click to collapse
1. Download the 2 files in post #13/ thanks NJAZ (SuperOneClickv1.7-ShortFuse.zip and mt3srooter.zip)
2. Extract them to their own folders on the desktop of your computer
3. Run the .exe files within each of the folders (open the programs SuperOneClick and mt3srooter--run as admin if using Vista or Win7)
4.In the Super1Click program, click "Shell Root", wait a moment til it does its thing
5.In the mt3gs rooter program, click on "Root Me"
It will tell you to turn on the wifi on your phone, and you must do it within 30 seconds, so hurry
6.Your phone will reboot into bootloader mode if all goes well. Use your volume buttons to navigate down to the fastboot option, and choose it with the power button. The phone will scan your sd card and find ESPRIMG.zip, and take a while checking the file. When it is finished checking the file, press the volume up button to confirm that you want to flash the file. Once it is finished flashing, you're rooted on stock 2.1 Eclair ROM.
I dont know if these programs put the update.zip for CWM onto your sd card too, I already had that and the ESPRIMG.zip on my card when I used this method, so if all else fails you, put a card into your phone with these files on the root of it into your phone and then use the 2 programs to gain root. Dont be afraid to try it a couple of times if it doesn't work the first time, and make sure that you have the correct drivers for your phone installed on your computer. To get into CWM Recovery to be able to flash custom ROMs, boot into bootloade by starting your phone and holding the vol-down button, and you will get a black screen with a red triangle. Then press power and vol-down and choose "Apply Update.zip" and in a moment you will be in CWM Recovery,as long as you have the file on the root of your sd card.
Just thought I'd spell it all out very detailed and simple for anybody less familiar with all this kind of stuff, makes for less "please explain step #...." posts.
ugh
this is soooo lame!!!!!!!!!!! n not ur post but my situation i cant get it!!!! it goes thru the process on ultra easy but one it get to the writting on cmd it says it wasnt "cd /sqlite_stmt_journals" then it says that the exploidcant be found and the rest of the other things that the program tries to push....im getting so frustrated..ived rooted g1 mytouch droid evo ived unlocked jailbroken all iphone models from 1st gen to iphone 4 all ipods unlocked blackberrys gotten to root on hd7 put android and wp7 on a hd2.... but this devices i am having so many problems!!!! ived tried every method and get to the same stop forget this phone im getting on craigslist n trading!
this worked for me....im still having problems with the a2sd tho...