Database Users

white screen with small colored lines

hi every one. I have a qtek s200 and I have a white screen problem. I don't know why one shiny morning my qtek appear with a white screen. First I think that was the screen and buy a new one. after replaced I turn it one with the new screen the screen seams equal :s After that I made a lot of search and did some thinks like install Active Sync. The active Sync does not detect my phone.. I install the last versions but nothing appear.. when I plug the phone on computer with USB cable nothing is detected by computer but if I press photo+on button it detect a "windows Ce usb device" and nothing appear on active Sync.
I already try reset using style and nothing. I try to update using PDAMobiz_Prophet_WM6_V1.00_Step1 (ROMUpdateUtility_NV_G4.exe). It finish and I get the message that was successful updated. And if I try to update it again appear the same screen saying that don't have a version (see the printscreen). I never see the 3-colour menu :s it just don't appear.
Any one one what I have to do to play again with my phone?
Thank you very much. Best regards.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
printscreen http://img217.imageshack.us/my.php?image=73046337ny4.jpg

Recovery
http://forum.xda-developers.com/showthread.php?t=401326
If at any stage your Prophet fails to start properly or can only enter bootloader follow this:
* Download and install the latest version of ActiveSync (Google for it)
* Download and unzip an AKU2.2 (No Vendor) ROM for the Prophet-any AKU 2.2 will do-from [here | ftp://xda:[email protected]p.xda-developers.com...4721_NVID.exe] or [here | http://wiki.xda-developers.com/index...=Prophet_ROMs]
* Within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB)
* Put the Prophet into bootloader mode (hold the camera button and insert the stylus into the larger hole next to the power socket)
* Plug the Prophet in via USB
* Run the RUU specific to your device (G3 or G4) from the AKU2.2 folder. If there is only one RUU, use that.
* When it has finished: disconnect the Prophet, and then re-enable the connect through USB in actyivesync before reconnecting the device.
==> if success, will going back into WM5 and then u can use the Lazzy Tool, look at http://forum.xda-developers.com/showthread.php?t=353547
choose WM 6.1 ROM, after u doing that step, u already done with the WM 6.1
SEMOGA SUKSES!

HTC surround enter usb host mode after unlock by XTC clip

HTC surround T8788 AT&T enter usb host mode after unlock by XTC clip.please help me.Thanks.

Just reflash your phone.

eglunas said:
Just reflash your phone.
Click to expand...
Click to collapse
i flash RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
but error 294 : invalid vender ID.i need rom at&T please help.

Here is the At&t ROM its the original 7.7004
http://www.megaupload.com/?d=KY9UZEHI
(Charge Battery to 100%)
With the phone powered off hold volume down and power button to boot into Bootloader screen (Red Blu Green White),plug in usb cable to computer and into the phone(it will say "serial" at the bottom ( let it install the qualcomm cdma driver) Then "serial" will change to "USB" at the bottom of the phone screen, extract the ROM.zip file from download link above and click the Rom update utility EXE and follow the instructions from there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I need you help please, I have the same problem with my htc 7 surround of AT&T, but I didn´t use the tool "unlock by XTC clip". My phone worked well, but the last week, it freezing in the logo "HTC" and don´t pass from here; it do not start wp7.
I use this tool that you give from megaupload but when the program verify the image version of my htc - it is in blank, my phone phone don´t have image version- I don´t know what I have to do. I use everything to install a new windows phone 7 operating system to my htc surround.
please give me a response...

i need this file but link not working again. says file might have been deleted
waiting for your response.

I need this file but link not working again. Thanks in Advance... Kamijee

deleted

Help needed to install HSPL4 for HTC HD2

I am now using WM 6.5
I want to install Android 2.3.2 Gingerbread ...my Radio version is : 2.15.50.14
Which is compatible for Android but I have SPL version : 3.03.0000 XE
Which i want to downgrade to HSPL >2.08 (Required for install Android /WM7)
But when i was doing Flash using HSPL4 Shows following error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What should I do?? help guys ......
Please Help Guys i really want to install Android!!!!!

Did you have USB connection before? If yes, the driver should be in your system.
To flash HSPL, you should go into bootloader mode with your HD2 (push vol. down and power at the same time while starting the device), and next step would be to connect to the PC via USB.

tictac0566 said:
Did you have USB connection before? If yes, the driver should be in your system.
To flash HSPL, you should go into bootloader mode with your HD2 (push vol. down and power at the same time while starting the device), and next step would be to connect to the PC via USB.
Click to expand...
Click to collapse
ya i have USB connection ...(driver means any HTC Specific driver for HTC HD2)
and i have done (push vol down and power at same time) but the serial appears at bottom of the screen and after attching USB to pc nothing will happen it stuck for whole time

Different usb port, use one around back of the PC, not one in the front or hubs or usb extensions or anything, it will only work in the ports directly mounted to the motherboard. Also, when it times out, don't touch the phone, just run hspl again. Keep trying different ports. Noneed to keep restarting the phone, just leave it in bootloader.

samsamuel said:
Different usb port, use one around back of the PC, not one in the front or hubs or usb extensions or anything, it will only work in the ports directly mounted to the motherboard. Also, when it times out, don't touch the phone, just run hspl again. Keep trying different ports. Noneed to keep restarting the phone, just leave it in bootloader.
Click to expand...
Click to collapse
thanks for info ...but i have used the main USB port but still gives error

aktsa said:
thanks for info ...but i have used the main USB port but still gives error
Click to expand...
Click to collapse
Restart a PC might help or else reinstall USB Driver (HTC Sync)

doesn't matter which os do you use either win7 or xp or vista - just use not the port which is giving you an error use the other one try it again if it fails just close your antivirus or firewall while using that flash tool it might help!

Need Help Manual Fastboot Driver Installation

Hello
Sorry if this was a very noob topic
I done lots of flashing new ROM or back in stock process but i almost gave up this time
My phone status are
No OS
TWRP installed
Can boot to recovery
PC can't recognize the phone
Typing ADB devices shows empty list
Typing Fastboot devices also shows empty lines
30% battery left
I recently try to install the Lollipop version for my phone but it turns out that the zip are behaving like OTA (yep the title of the zips are OTA)
What i mean is it returned my recovery to stock
Without thinking much further i did 'fastboot flash recovery TWRP2810.img' thing (Yes i rename recovery image that way so it will be more convenience for me) and wipe all partition in the phone through the TWRP without problems
One thing i forgot is to "refresh" all ADB and Fastboot driver for my phone on the PC
Now my phone states are "No OS" and "PC doesn't recognize my phone" wether in ADB (obvious cause i can't boot with no OS so no USB debugging for me) and Fastboot (Enter Bootloader is OK, enter TWRP is OK too)
I already try the WUG step for installing the needed driver but no success since my PC can't recognize my phone
Try on 4 PC at my office and all of them are ignoring my phone
What should i do now, please, any help will be appreciated since its already the time i ussualy already at home
Thank You Very VERY MUCH for any help I can get.

unsungkhan said:
Okay, here's what you do.
Download the ADB drivers first, from here [URL="link"]http://developer.android.com/sdk/win-usb.html
Click to expand...
Click to collapse
unsungkhan said:
Extract the zip.
Once you're done extracting, boot your phone into bootloader mode, plug in USB, should show up as an unrecognized device.
Device manager from control panel, select device, properties, driver, update device driver, browse my computer, let me pick, all devices, have disk, navigate to where you extracted zip, select inf file, adb interface.
Should work.
Click to expand...
Click to collapse
[/URL]
Thank you Sir
I managed to fresh install my XP and continue with your instructions
I don't know why but it gave me this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I already try other driver but still a no go?
Do you happen to know other way around for tricking this Sir?

Please lock this unuseful thread

Before locking the thread, can you repeat all the steps and try with ADB Composite Device instead of ADB Interface?
Also, did you try changing USB ports, sometimes these things get a little troublesome because of faulty USB ports.
Last but not the least, you could also try a change of cables.

unsungkhan said:
Before locking the thread, can you repeat all the steps and try with ADB Composite Device instead of ADB Interface?
Also, did you try changing USB ports, sometimes these things get a little troublesome because of faulty USB ports.
Last but not the least, you could also try a change of cables.
Click to expand...
Click to collapse
#late_post
i've been able to resurrect my phone finally
after those steps i found Universal Naked Driver and it works
Thank You very MUCH Sir :laugh:

Bricked Help Me

i tried to flash drivers i get this errer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was on android l v12 , my device is note 3g
i tried to flash new offical miui6 via twrp 2.8 i got error
and wiped data,system etc...
so i am not able to enter recovery and even into rom what to do??
Please Help ME

It seems a problem with Windows rather than with your phone.
First of all don't worry, there are very high chances that you will recover the phone in working state. I worked for over a year with MTK devices, they brick very easily but it's also easy to unbrick.
It's a signature error, not a driver error. I remember Windows has somewhere the option to disable signature checking for drivers. Disable it, then after installing this driver you can re-enable it if you want.
I assume you are able to proceed from this step on, once phone is recognized by PC. If I'm wrong, feel free to ask

To Install Driver without Signature error.
This will Help u to install driver without signature.
What to do:
1. Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, then click the gear icon (Settings).
2.Click More PC Settings.
3. Click General.
4. Under Advanced Startup, click Restart Now.
NOTE: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’
5. After restarting, click Troubleshoot.
6. Click Advanced Options.
7. Click Windows Startup Settings.
8. Click Restart.
9. After restarting your computer a second time, choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
10. After restarting, you will be able to install the drivers normally; however, Windows will display a warning message. When the warning appears, click Install this driver software anyway.
You are now complete. I hope this will help you. Good Luck..