Seeking app or way to notify me reboot the phone, because once you do, and I do not hear, I usually watch the led, and I see no notice and I can go hours without seeing the screen.
I searched the web and all I could do that role is a program that notifies you when there is no network, and how when you restart is waiting to enter the PIN, it is not covered.
Anyone know of a program to vibrate and activate the LED when a restart, thanks.
Related
Please excuse my noob question. I tried to search but didn't find an answer.
My Cingular 8525 with the latest official WM5 ROM has started acting up. It seems to think there is a notification present. It blinks the LED in yellow and sporadically makes the sound currently programmed for new voicemails. If I afterwards I get a valid notification (e.g. missed call), and I clear that notification, then the LED blinks green and the phone behaves normally.
If I soft-reset the phone, a few seconds after the green Windows Mobile screen displays, the phone vibrates and plays the sound. It keeps playing the sound and vibrating every few seconds for a while, blinking the yellow LED (the phone is fully charged). I don't see any other notifications on the screen. After a while it sometimes stops playing the sound, but the LED keeps blinking yellow. The playing of the sound occurs at longer intervals if you just let the phone sit. Only if another valid notification occurs and is then cleared does the blinking LED turn green.
I haven't installed any new software recently. It just started doing it on its own. I can't pinpoint any event that started this. It seems to be activated early during the boot process, before the normal WM5 Today screen comes up.
Does anyone have any idea what might be causing this?
-Henry
Thanks!
I couldn't find how to delete notifications with the trial version of SKtools, probably because it only shows 6 entries of things it finds wrong in demo mode, but I was able to use MemMaid. Seems like a good program so I may buy it.
There were a few duplicates, but the problem persists after removing them. Same symptoms as before.
I hope the official WM6 comes out soon. I don't want to hard reset my phone until then.
What I don't understand is that getting some notification (e.g. a missed call) will result in the phone going back to normal. Also, the sound/vibration that it makes stops after a few minutes, only the blinking yellow LED remains until clearing another notification makes things go back to normal.
Anybody know if there's a way of keeping my Trinity in standby even when a text message comes through - I keep the thing in my pocket and if I don't look at it straight away after a text has come through, all kind of things happen - programs get launched, photos get taken, voice memos are created, just from it moving around in my pocket after un-standbying itself!??
Thanks
Lock the screen and when a text comes no programs will launch!
Nope...
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
flight mode
tjw2007 said:
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
Click to expand...
Click to collapse
Not so on mine when it is locked it stayes locked! The screen will come on but the machine stays locked.
What mine is doing is when a text comes through, it seems to be causing the device to unlock, because the screen will take touch commands - I need to be able to lock the screen and get it to stay locked even when a text comes through. Any experts out there who might know how to achieve this?
Thanks
What is flight mode anyway?
OK, let me put this another way - is it possible to lock the screen until you press the standby button, so that nothing else unlocks it such as a text message or phonecall?
Thanks
I don't have this problem. My screen is set to go off after 1 minute. When the phone is in standby, all I get is a tone and the orange light flashes. The screen will not come on, unless I press the power button.
No input is accepted when in standby by the screen or any button except the power button - check your settings
I also have it set to auto-lock after 2 hours, so even if I get a text, and turn the screen on, then i need to put the password in before the screen unlocks
i use my m700 the same as you with no problems
RESOLVED!
Managed to put the device lock option on the 'Today' screen and this keeps the whole device locked (screen & all) no matter what happens, until you press the unlock option on the screen. Hooray!
so I put the dimming to be after 30 seconds, which works.
however I put it to shutdown the scree after one minutes, however it stays on forever, unless I physically press the hang up key, the screen will be on all the time.
the other question I have.
2- When I search on google, and press on one of the results in opera it takes me to the definition page, rather than the actual result that I wanted
3- is there a fix for LED notification, I installed the cab to fix that, but it didnt make a difference.
4- the pink spot at the middle, I searched around but didnt see any real solution
can anyone help please
regards
While I can't offer any help, I can feel your pain! I too am experiencing this f**ing event! I placed in my pocket before boarding for a 6 hour flight yesterday and found it still powered on when the flight had ended. I had just enough power to make and receive a call! Great.
I've double/triple checked my settings after this same thing happened to me previously! WTF!
edved.
i had the same problem what you need to do is to change the screen light setting in the settings menu
moneysaver05 said:
i had the same problem what you need to do is to change the screen light setting in the settings menu
Click to expand...
Click to collapse
Ok. I'll try your suggestion, but please tell me what the screen light setting should be?
Thanks.
just go to the backlight settings, tap ok and it seems to be fixed..
(but offcourse check if is set to turn off after a minute or whatever your needs are)
I experienced this yesterday.. just like in normal windows, some functions just stop working with no particulair reason.. I don't really worry about it.. probably fixed in the next rom.. same sometimes happens with the screen lock, sometimes it's gone.. also after reboot, althought I find it more convient that way, it can be fixed by locking the device manually.. this does proof we can disable the device lock somewhere, I really don't need it in the case I use, the power button is enough..
good tip to always push the power button before putting the device away.. saves a lot of battery too then to wait for the minute before it powers of by itself.. the large screen is the battery's biggest consumer.. this way you also don't have to trust the automatic power off.
problem is pushing the power is not enough.
because if there were any even that woke the phone up, it will never shut down the screen unless you saw it, and do it manually
mmmalas said:
problem is pushing the power is not enough.
because if there were any even that woke the phone up, it will never shut down the screen unless you saw it, and do it manually
Click to expand...
Click to collapse
no the automatic power down is seperate from the screen lock, but for some reason they connected it with the automatic power down and left the options to choose out.
1024 Leo, USA T-Mobile version.
It only happens with incoming email, SMS and calls are fine.
When I try to reproduce the problem, I simply have to wait for the phone to check for new mail. The the phone notifies me about new email. If I try to turn the screen on, it won't. The hard button lights up, indicating the phone is on but I can't interact with the screen. Resetting the phone via the red button is the only remedy.
If I act real fast when new mail comes, sometimes I'm able to start sliding to unlock but it still crashes. If I'm really fast I'm able to even get to the mail screen but it still crashes.
But the crash does not occur if I'm already using the phone when new email comes in. If I want to reproduce it, I have to leave the phone "alone", with the screen off. If the screen is on when the new mail comes in, the crash does not occur.
The problem started occurring with completely stock phone, the very first day, without making changes. As I cab tweaked the phone, (no ROM) the problem persists, it happens.
Because of this problem, when I wake up in the morning, I can't use my phone because the screen doesn't turn on and I have to restart the phone so I can use it. My mail send/receive interval is set for 4 hours so while I sleep the phone receives new email at least once.
I investigated similar problems for TP2 and Touch HD but it does not help.
I backed up everything on my phone so I'm ready to make changes if you have any advice. I checked for: changing the email ring tone, wake up on new email setting. They have no effect on this problem.
After this happens, I tried calling my phone. It will not ring, but the hard buttons light up but are unresponsive, I can't neither pick up nor reject the incoming call. I sent an SMS to the phone in this state, it didn't do anything.
Do you have knowledge that can help me? Is anyone willing to try to reproduce the problem on their phone?
All you would do is set any ring tone for incoming mail, leave the phone with the screen off and "wait" for new email to come in. Don't do anything for a minute and then check if the crash occurred.
Please help, I hate waking up to a crashed phone that I need to restart every time. Because of this problem, setting a wake up alarm is useless.
If you can't help with this, at least is there any way I can "force" the phone to restart without removing the battery cover?
Thank you.
Anyone having this problem? All of a sudden when I either receive a call or place a call, the Call app that does the overlay locks up and the screen goes completely unresponsive. I can't answer the call (except via a bluetooth device). Likewise with hanging up. I can't press the buttons to turn on speaker -- nothing works. The notification comes up green during a call with the phone icon, but no text.
Eventually: "Call is not responding" pops up, and I'm given the options to Wait or End the app. Ending the app sees it restart immediately and become unresponsive again. Rebooting the phone or waiting for the call to disconnect are my only ways out.
Beyond frustrating! Any ideas? HELP & thanks!
-David