[Q] S =-off, no Visionary won't let me root - myTouch 4G Q&A, Help & Troubleshooting

I used visionary to temp root/root. followed all the instructions in visionary and terminal emulator. when I restarted the phone it showed S off, I went to visionary to perm root and it say's I have to temp root my phone?? I rooted my other mytouch 4g the same way and it worked so I don't know what's wrong Im pretty sure i'm not doing anything wrong

Once you get s off and boot up you don't have su permissions so you need to temproot and then permroot immediately after to complete the root process
Sent from my HTC Glacier using XDA App

I got S off, rebooted in the mode, did everything in terminal emulator and when i went to visionary to perm root it said i had to temp root my device first, when i try to temp root with visionary the program keeps flashing for a few minutes, then nothing... anything I can do with the S being off already? The "super user" program is in my programs already also... can't figure it out

King350z said:
I got S off, rebooted in the mode, did everything in terminal emulator and when i went to visionary to perm root it said i had to temp root my device first, when i try to temp root with visionary the program keeps flashing for a few minutes, then nothing... anything I can do with the S being off already? The "super user" program is in my programs already also... can't figure it out
Click to expand...
Click to collapse
When you try to use root access is it not allowing it? Open up something like root explorer that asks for root access and see if it works. If it does then it sounds like it worked.

No it's not even though I have S off and did all the commands in terminal, I tried using Rom Manager, Titanium etc.. other root programs it says I need to root my phone first...

King350z said:
No it's not even though I have S off and did all the commands in terminal, I tried using Rom Manager, Titanium etc.. other root programs it says I need to root my phone first...
Click to expand...
Click to collapse
Do you have the SuperUser icon?

bootloader? Here's the root guide
What bootloader do you have?
0.86.0000 seems to make some rooting methods difficult if not completely ineffective.
Follow these instructions:
http://forum.xda-developers.com/archive/index.php/t-995549.html
It was seamless for me.
**I am not responsible for any consequences of you playing with your phone.**

thepza said:
What bootloader do you have?
0.86.0000 seems to make some rooting methods difficult if not completely ineffective.
Follow these instructions:
http://forum.xda-developers.com/archive/index.php/t-995549.html
It was seamless for me.
**I am not responsible for any consequences of you playing with your phone.**
Click to expand...
Click to collapse
All phones come with the .86.xxxx bootloader, you cannot load the .85.xxxx bootloader to the phone till after one has rooted and s-off'd the phone.
as quoted from here
http://forum.xda-developers.com/showpost.php?p=14573409&postcount=15
there are two ways to root our phones.
1) root.sh, regardless of what VISIONary or root.sh package you use. This will only root phones with good eMMCs. If your phone doesn't root via this method, then you have a bad eMMC and shouldn't root your phone.
2) ./gfree, regardless of what VISIONary or ./gfree package you use. This will root your phone regardless if you have a good or bad chip. you are setting yourself up to be royally screwed down the road, if you use root.sh it fails multiple times. Then use ./gfree to root it.
you are correct in the assumption that ./gfree will root your phone no matter what. But it will brick you phone if you have a bad eMMC. It might not happen right away, it might not happen in a week, or a month. But it's coming. There are thousands of threads all over the webs of people with bricked phone who use ./gfree to root their devices with a bad eMMC. there are significantly less threads of people who use root.sh and have bricked their phones.
advising someone to use ./gfree after they've admitted that root.sh didn't work, multiple times, w/o a fair warning is ignorant and not really helping anyone. a rooted phone is nice, a bricked device is totally different....

Yes I do and s off, but no root access and visionary wont root it after I successfully temp rooted, then booted did terminal emulator, wen I went to perm root it said I had to temp root first
neidlinger said:
Do you have the SuperUser icon?
Click to expand...
Click to collapse
Sent from my HTC Vision using XDA App

King350z said:
Yes I do and s off, but no root access and visionary wont root it after I successfully temp rooted, then booted did terminal emulator, wen I went to perm root it said I had to temp root first
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
settings > applications > all > search for super user > delete the icon > reboot the phone > try visionary again.
Try that, it should help.

neidlinger said:
1) root.sh, regardless of what VISIONary or root.sh package you use. This will only root phones with good eMMCs. If your phone doesn't root via this method, then you have a bad eMMC and shouldn't root your phone.
[/SIZE]
Click to expand...
Click to collapse
Not true. Visionary doesn't permaroot for all of the good eMMCs. Verify which eMMC you have. If you don't have ADB set up, then temp root (although you're having problems with that currently) and then in Terminal Emulator:
cat /sys/devices/platform/msm_sdcc.2/mmc_host/mmc0/mmc0:0001/name
That will report out the name of the chip you have. SEM=good.

delete the icon or uninstall the program, then try to temp root again with visionary and go through the steps?

King350z said:
delete the icon or uninstall the program, then try to temp root again with visionary and go through the steps?
Click to expand...
Click to collapse
delete Super User from the Application menu, via the settings. Then try to temp root / perma root again.

thepza said:
Not true. Visionary doesn't permaroot for all of the good eMMCs. Verify which eMMC you have. If you don't have ADB set up, then temp root (although you're having problems with that currently) and then in Terminal Emulator:
cat /sys/devices/platform/msm_sdcc.2/mmc_host/mmc0/mmc0:0001/name
That will report out the name of the chip you have. SEM=good.
Click to expand...
Click to collapse
you have no clue what i'm saying.
VISIONary will not perma root a phone at all. You must manually turn s-off. You need to do that one of two ways. Either with the root.sh or the ./gfree method. both of which use VISIONary in their independent process. root.sh will not root bad eMMC phones. ./gfree will root either or without a problem.

will try it thanks, I don't know if it makes a diff but wheni open visionary now while temp rooting it just flashes for a few minutes?
neidlinger said:
delete Super User from the Application menu, via the settings. Then try to temp root / perma root again.
Click to expand...
Click to collapse

King350z said:
will try it thanks, I don't know if it makes a diff but wheni open visionary now while temp rooting it just flashes for a few minutes?
Click to expand...
Click to collapse
That's why i said earlier to reboot after you delete the superuser.apk. It will clean all of the current cache out.

Thank you for the help, will try it out when i get a chance later tonight or tomorrow, hope it works

Related

[Q] S-OFF after using Visionary r14

Could someone explain to me or point me to a thread that explains how to get S-OFF after permarooting with the r14 visionary + build?
I just used the s-off guide in the android development section and it worked perfect.
Go on youtube and search for "visionary g2", there is a guy on their called blackprice that has a step by step video on how to perm root and s-off the phone.
Good Luck.
Thanks, but I need someone to explain to me how to use adb with a mac. Every guide out seems to be for windows
pak256 said:
Thanks, but I need someone to explain to me how to use adb with a mac. Every guide out seems to be for windows
Click to expand...
Click to collapse
In the video, black prince actually shows how to do it on the phone itself with terminal emulator.
Awesome, thanks
So I have followed the instructions from blackprice and they seemed to work, I was able to do the S-OFF. However, when using SetCPU I get this message:
Root Access Not Detected
SetCPU could not obtain root
access. Did you allow SetCPU
through Superuser
Permissions? (the answer is yes) If you checked
Superuser Permissions and SetCPU still cannot get root,
there may be a permissions
issue with your ROM.
Please advise...
Thanks
Use visionary and attempt perm root. I had the same problem but this fixed it. Wait for someone else to confirm this though.
Sent from my T-Mobile G2 using XDA App
Also get rom manager from the market and falsh clockwork recovery.
Perm root and the reboot, and visionary should stick.
Thanks! Both of you.
pak256 said:
Thanks, but I need someone to explain to me how to use adb with a mac. Every guide out seems to be for windows
Click to expand...
Click to collapse
If you google then you will come across some good guides to use ADB on mac
So to confirm with what you are stating, S-OFF but still not accessing root permissions. Re-apply perm root in Visionary, let it reboot, and it should stick. Correct?

Rooting help! Did I root?

See post #30 PLEASE:
Quick questions:
1) on step 12. If this is the first time you have rooted your device you will need to run visionary again (temproot w/set system r/w after root checked and then attempt permroot) to make root privileges permanent and then reboot again. Now "su" should work properly for you.
I have the correct visionary installed...is step 12 a two-step deal? Is it "temp root with set system" and once that does it's thing, try permroot? It's rather confusing lol
2) when I hit "attemp permroot now" nothing happens...it just stays on the visionary screen
3) when I run visionary and do temp root...it says it's rooting, but then the screen goes black (but the top status bar remains showing my signal and battery) and it stays black. If I lock/unlock it comes back to the visionary screen...but only if I lock/unlock...what's going on here?
SEE POST #5
ok I think I'm rooted (I was able to download screenshot and take a screen shot, so I assume I'm rooted if what I'm reading is correct)...but when I hboot it says s=on...I thought I wanted s=off, and if so, how do I now get it into s=off?
http://forum.xda-developers.com/showthread.php?t=834225
why not try this way...it was real easy for me...
Does the phone need to be plugged in for that method or no?
If you download the files directly from the phone, then no. It's easier connecting it to the computer, IMO.
ok I think I'm rooted (I was able to download screenshot and take a screen shot, so I assume I'm rooted if what I'm reading is correct)...but when I hboot it says s=on...I thought I wanted s=off, and if so, how do I now get it into s=off?
Sounds like you have temp root on boot enabled in Visionary. You can use the guide provided for S-OFF and permaroot, or you can use this guide right here. Both are pretty good and easy guides.
http://forum.xda-developers.com/showthread.php?t=858996
Before running Permaroot, make sure you have S-OFF. If you try permaroot with S-ON, you'll regret it forever.
I used the link that calimove provided and used the "Terminal Emulator Method" in the thread, and got me where I am.
I try using the "Alternative Root Process" but can't get the "Open command window here" to show up when I do step 1A
If you truly want your phone rooted with real s-off follow this method step by step, this is how I did it to my phone, if you need help PM me and I will give you my cell and take you through it step by step. it looks scary at first but really it isn't
http://forum.xda-developers.com/showthread.php?t=858996
I agree also with the post above that's the guide you need if you want true root.
Sent from my HTC Glacier using XDA App
Ok so I'm on step 12 " If this is the first time you have rooted your device you will need to run visionary again (temproot w/set system r/w after root checked and then attempt permroot) to make root privileges permanent and then reboot again. Now "su" should work properly for you."
I got s-OFF and the correct bootloader version (according to the hboot)...so now waiting.
One thing I noticed was different, when I did it earlier (and the guy above said I had a temp root) I had only one screen to work with (I couldn't scroll to other 4 screens we have when the phones new out the box). Now, with this "TRUE PermaRoot and the ULTIMATE S=Off!!!" thread, I have my multiple screens back.
Since you have S-OFF now, just run visionary to do a temp root, and then do a perma root [Click allow when it asks you for Superuser permissions] and you'll be permarooted.
GazaIan said:
Since you have S-OFF now, just run visionary to do a temp root, and then do a perma root [Click allow when it asks you for Superuser permissions] and you'll be permarooted.
Click to expand...
Click to collapse
how do I do a perma root?
With Visionary. First temp root the phone, and then use the permanent root option below it and visionary will take care of the rest.
Again, be 100 percent sure that you have S-Off.
bballcat03 said:
Ok so I'm on step 12 " If this is the first time you have rooted your device you will need to run visionary again (temproot w/set system r/w after root checked and then attempt permroot) to make root privileges permanent and then reboot again. Now "su" should work properly for you."
I got s-OFF and the correct bootloader version (according to the hboot)...so now waiting.
One thing I noticed was different, when I did it earlier (and the guy above said I had a temp root) I had only one screen to work with (I couldn't scroll to other 4 screens we have when the phones new out the box). Now, with this "TRUE PermaRoot and the ULTIMATE S=Off!!!" thread, I have my multiple screens back.
Click to expand...
Click to collapse
Hey bud if you did the method step by step than yes you have true root. when you get to the end and need to run Visionary one more time you need to select temp root and after you temp root select what the method says to select and then select "attempt perm root" and now my friend you should have TRUE 100% s-off root!
Ok thats probably where my problem is. When I open visionary I only have 4 options:
-root on boot
-"run visionary.sh after root" which is unchecked
-"set system r/w after root" which is unchecked
-root now
So what am I missing? Ive always been clicking "root now" everytime.
And I just hbooted and yes I have s-off.
I have never seen anything that's said "attempt perm root" at any point
Sent from my HTC Glacier using XDA App
bballcat03 said:
Ok thats probably where my problem is. When I open visionary I only have 4 options:
-root on boot
-"run visionary.sh after root" which is unchecked
-"set system r/w after root" which is unchecked
-root now
So what am I missing? Ive always been clicking "root now" everytime.
And I just hbooted and yes I have s-off
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
If memory serves, you'll need to have set system r/w checked
Sent from my HTC Glacier using XDA App
jmwils3 said:
If memory serves, you'll need to have set system r/w checked
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I did that at the end of step 12 cause it was my first time rooting
Sent from my HTC Glacier using XDA App
bballcat03 said:
I did that at the end of step 12 cause it was my first time rooting
OK, you may have the wrong version of visionary. I think r14 was the one that had temp and permanent root.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Sent from my HTC Glacier using XDA App
If you did that than you should be rooted, try removing your battery and then booting into hboot, if your still seeing s-off than you got it!
Just read the above post give me a sec and I'll send you to the newest visionary
Triketra said:
If you did that than you should be rooted, try removing your battery and then booting into hboot, if your still seeing s-off than you got it!
Just read the above post give me a sec and I'll send you to the newest visionary
Click to expand...
Click to collapse
Thanks, bro. I'd send it, but im mobile currently. Hope that will help you, op.
Sent from my HTC Glacier using XDA App

I Want Permroot, but no go?

Nothing happens when I click "attempt perm root"...absolutely nothing. What the F is going on?
bballcat03 said:
Nothing happens when I click "attempt perm root"...absolutely nothing. What the F is going on?
Click to expand...
Click to collapse
You have to follow steps to unlock the bootloader (achieving S-off) before perm root will stick. Read the thread on achieving S-off. Don't do anything you don't fully understand, so read a lot. Afaik visionary does not perm root with one click without first having an unlocked bootloader.
EDIT: Read the resource bible. It's a sticky in the dev forum.
Swyped on my rooted MyTouch4G
I have s-off with 0.85.2007...everything works like a charm until I get to the permroot part...nothing happens when I hit it.
bballcat03 said:
I have s-off with 0.85.2007...everything works like a charm until I get to the permroot part...nothing happens when I hit it.
Click to expand...
Click to collapse
If you have s-off and you have the eng 2007 bootloader, you're rooted. Make sure you have the superuser app installed to your phone. If not, you can get it from the market. You need it to gain root privileges in apps. If you have superuser you can test root by opening terminal emulator. Type su and hit enter. If you get a root request confirm it. The $ symbol should change to #.
You shouldn't need visionary anymore. Once you confirm root, uninstall it.
Swyped on my rooted MyTouch4G
But without doing "permroot" in visionary, it's not permanent, correct? Cause I want it permanent, not temp.
Yes I have superuser installed.
bballcat03 said:
But without doing "permroot" in visionary, it's not permanent, correct? Cause I want it permanent, not temp.
Yes I have superuser installed.
Click to expand...
Click to collapse
Try what I said with terminal. If you type su and hit enter, you should see a #. If you do, congrats. Reboot and test terminal su command to see if your root sticks. Visionary won't tell you if you're rooted.
Swyped on my rooted MyTouch4G
Ok I redid everything again (without doing "attempt permroot") and did what you said and the $ changed to #...however, when I first did the temp root, and then went into terminal to do the:
- su
- "cd /data/local" etc....it changed from a $ to a # as well then...before I got to the end and rebooted.
So I am permrooted then and can change roms? Why didn't I have to do "attempt permroot" in visionary?
The unlocked.com
Precise...simple..quick...easy...works...
Hope it helps!
Sent from my HTC Glacier using XDA App
h0wlings0nnets said:
The unlocked.com
Precise...simple..quick...easy...works...
Hope it helps!
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Uh, that's not a website!
Like I said, you were already rooted. When you attempt perm root with Visionary, I don't think it tells you anything. Just make sure your root sticks by rebooting and then typing su in terminal. If you get the #, you can uninstall Visionary.
As for flashing ROMs: You need to flash a new recovery in order to make Nandroid backups and flash ROMs. Clockwork ROM Manager from the market will allow you to flash Clockwork Recovery on your phone. I don't know how much experience you have with flashing ROMs in general, but if you're a novice in any way I wouldn't start changing your system just yet. Read the resource bible, lurk the developer threads, and get a firm grasp on what you are doing. Get familiar with ADB and Fastboot. Be totally confident in your knowledge. You can still brick your phone or at the very least give yourself an unneeded heart attack and hours of troubleshooting sh!t.
Resource Bible
Good luck and congrats on root!
Yeah I am looking at the "how to flash a rom for noobs" thread out of the resource bible...it says "In the hboot menu select recovery and then the phone will restart. You will get a phone with yellow triangle error."
I select recovery and another screen came up regarding the clockwork with a bunch of options, it didn't restart. And when I selected the option that said "reboot" it did, but I didn't get a yellow triangle error
Any ideas there?
Sounds to me you already have Clockwork Recovery installed. You must have done that without knowing it. Beats me. I you go into HBOOT and select Recovery the phone will shut off and boot into recovery mode. If you got Clockwork Recovery version 2.x.x.x (with green typeface), that just means you have Clockwork recovery installed and can flash Froyo based ROMs (like Iced Glacier), make Nandroid backups, and a bunch of other stuff you probably shouldn't mess with.
Just know that you CANNOT flash Gingerbread based ROMs (like CyanogenMod 7) with CW v. 2.x.x.x
You need CW v. 3.x.x.x to use gingy ROMs.
Keep reading.
I PM'd ya, but no when I hboot and hit recovery, it doesn't reboot, it goes to "clockwork mod recovery v2.5.1.2
XfooYen said:
You have to follow steps to unlock the bootloader (achieving S-off) before perm root will stick. Read the thread on achieving S-off. Don't do anything you don't fully understand, so read a lot. Afaik visionary does not perm root with one click without first having an unlocked bootloader.
EDIT: Read the resource bible. It's a sticky in the dev forum.
Swyped on my rooted MyTouch4G
Click to expand...
Click to collapse
I'm having the same issue as the OP. I'm quoting because I had a permroot stick with s-on on my previous MT4G. (I just had it replaced, damn power button)
Explain please? Why would it work on one but not the other?
I would have posted this in the development forum in the thread that had this technique, but I don't have enough posts yet or something?
Anyway, I have S=off, and visionary temp root works fine. But permroot in visionary r14 doesn't work, it just flashes like the button is pushed then does nothing, like I didn't even hit it. So I need to run the temp root everytime my phone starts up.
I didn't setup the engineer bootloader yet, should I do that?
Does r11 work better?
What is the next step to get permroot to work?

[Q] unable to get su when attempting root

I am trying to root my phone and am running into trouble early. I have watched the videos & followed instructions. Somehow I am either missing something or my phone is jacked somehow.
I made sure it's not in fast boot, USB debugging & unknown sources are on. I have tried visionary r14 & r11. I have also tried multiple factory resets.
OK, I use visionary with set system r/w after root checked. I go from there to Term. Emulator & when I type su it shows "unknown user root" without the quotes. I've tried to continue but it gives me other errors and S is always on when I check.
I've searched Google & the forums and haven't found much that's been able to help me.
If anyone has seen this I would appreciate the help. Thanks!
Visionary (r11 & r14) are only temp root tools. You must use one of the two methods (both are in my signature) to turn s-off. As long as your s-on you will not be able to permaroot your phone.
Once you turn off the phone, and turn it back on you've lost Root Access. and that's why it's given you that error. If you pull the battery wait about 30 seconds, put the battery back in. Then temp root you should see a "superuser" icon appear. Once you see that try your SU command from terminal emulator. The other thing you can try is setting up your ADB (link in signature). Navigate to the c:/adb folder then typing in ADB shell. You should see a $ sign appear. Type SU from the Command Prompt and it should ask you to approve the SU access on the phone. once you've gained temp SU access you can proceed with one of the two methods i've got posted to finish turning s-off.
It's the temp root I'm getting stuck at. I do get the superuser icon after I do the temp root. I go directly to emulator and type in su and that is when it tells me "unknown user root". I will try the ADB method when I get home from work if nothing else is figured out before that.
Same deal for me. Not sure if my MT4G is a newer model or what. I've literally done EVERY set of instructions and youtube videos on rooting and keep getting stuck at the same place. Typing su into terminal emulator and getting unknown user root. I have reset my phone, taken the battery out for five minutes and re-inserted it. I have tried both visionary 11 and 14 versions and clicked temp root. Once the temp root process completes and comes back to visionary+ I go straight to terminal emulator, type in su and get unknown user root. Unlike dbharr I DO NOT get a superuser icon after temprooting with visionary. It's not like i'm fudging up any part of the process here. I'm stuck at like step 2 of the rooting process. Any ideas anyone?
Software version is 2.2.1
You may have a newer chip set and may only be able to root with s-off by using the gfree route. It was the only thing that worked for me.
In my situation I had visionary installed, root folder in the root of my sd card, and followed the unlockr method for root access.
I temprooted and checked temp root on boot and rw one too.
I ran terminal emulator, typed in the commands and the process ran and looked like a success.
I powered my phone down and boot into hboot and s-on showed up.
I tried the same process and factory reset between tries.
I then found out there was another way to get perm root with s-off using a similar process.
I factory reset and placed visionary apk and gfree folder on the root of my sd card.
I went on the android market and installed root explorer (there plenty others you can use it only need to be able to access your root) and also terminal emulator.
I installed visionary and temp rooted (using same temproot method from unlockr.com) my phone I downloaded the gfree file and extracted it on my cpu then moved it to the root of my sdcard.
Then using your root explorer go into gfree folder and copy the file called "gfree" and only this file.
The go into the root of the phone and your going to paste that into the local folder in /data/local/
From there you type in a few commands in terminal emulator. It will run thru a process then power down.
Boot into hboot and verify it shows s-off
If so reboot phone. When your phone boots up visionary should have temp rooted your phone.
If so Open up visionary and uncheck temproot on boot and click attempt perm root. Your phone will reboot and you have perm root. Verify by typing su in terminal emulator and then if you get # your good to go.
If you dont get s-off try factory reset and repeat process, you should be able to find the instructions if you search gfree and it should come up but if im not mistaken its a stickie on the developement forum
Hope this helps!
HTC Glacier
Perm-rooted S-off
If root.sh method is not working, use gfree + visionary method. Worked for me as a charm.
People, please bother to read before answering questions. Marking below the important part of the question that everyone is missing:
corollatercel said:
Same deal for me. Not sure if my MT4G is a newer model or what. I've literally done EVERY set of instructions and youtube videos on rooting and keep getting stuck at the same place. Typing su into terminal emulator and getting unknown user root. I have reset my phone, taken the battery out for five minutes and re-inserted it. I have tried both visionary 11 and 14 versions and clicked temp root. Once the temp root process completes and comes back to visionary+ I go straight to terminal emulator, type in su and get unknown user root. Unlike dbharr I DO NOT get a superuser icon after temprooting with visionary. It's not like i'm fudging up any part of the process here. I'm stuck at like step 2 of the rooting process. Any ideas anyone?
Software version is 2.2.1
Click to expand...
Click to collapse
To corollatercel:
If Visionary doesn't temp-root your phone, you could attempt it using SuperOneClick (google it) from PC, using rageagainstthecage or psneuter method. Just substitute the steps for temp-root using Visionary to temp-root using SuperOneClick.
Jack_R1 said:
People, please bother to read before answering questions. Marking below the important part of the question that everyone is missing:
To corollatercel:
If Visionary doesn't temp-root your phone, you could attempt it using SuperOneClick (google it) from PC, using rageagainstthecage or psneuter method. Just substitute the steps for temp-root using Visionary to temp-root using SuperOneClick.
Click to expand...
Click to collapse
Thanks, this is the answer I was looking for. An alternate method of temprooting. I will try this and post results. Thanks Jack.
Ok you guys may think i'm kidding but I tried both methods outlined
Here:
SuperOneClick trying both psnueter AND gingerbreak options
http://forum.xda-developers.com/showthread.php?t=803682
And
Here:
RageagainsttheCage
http://forum.xda-developers.com/showthread.php?t=792016
and even after superoneclick says its rooted AND says says success when it asks if I want to test root by sending su command, whenever I go into terminal Emulator and type in su I get permission denied or unknown user root whenever I tried su through adb shell through Dos on my machine. I dunno what is it with my device. I did all of this after fresh factory resets just so you all know. I dunno my MT4G must have a newer chipset that's not vulnerable to the current exploits is all I can say. I've follow these instructions to the letter more than twice each time factory resetting just to make sure things are fresh. Still no dice.
I never did get mine working. I did get a warranty replacement & had it rooted within 10 minutes of being out of the box. That makes me think it was something with the phone. Best of luck to others with the same problem.
dbharr said:
I never did get mine working. I did get a warranty replacement & had it rooted within 10 minutes of being out of the box. That makes me think it was something with the phone. Best of luck to others with the same problem.
Click to expand...
Click to collapse
Yeah unfortunately am not in that same position. It sucks. Guess i'm stuck with it for the moment. Only reason I really wanted to root and upgrade was so I could download netflix. I went from the G2 to the MT4G and had NO idea it was just compatible with certain devices. I've tried different versions of the netflix app on here too but they all require you to have root. Hopefully they make the app compatible soon.
Here's an update everyone. I was FINALLY able to get everything working. I had to use a tool called Z4root to gain temproot. You can imagine my relief AND also frustration after I installed z4root and things just started running just the way it was supposed to. I gained temp root in a matter of minutes and after doing so I was able to use the gfree method to perform all other functions that are a part of the rooting process. And for the record ALL other tools did not work for me:
- Both versions of visionary + 11 and 14
- SuperOneClick using psnueter AND rageagainstthecage exploits
Just thought I'd share. Thanks a lot guys. I had already put my mytouch on cl for sale or trade for a G2 because I thought my device could not be rooted or anything. until about 1 o clock in the morning I got it workin...ha.
Thats sweet man im glad you got it done, only difference I was avle to use visionary
Sent from my HTC Glacier using XDA App

[Q] is this root real?

so...i finally got my phone rooted, i think. i used visionary after downgrading to 2.2.1, and i went into terminal, typed in su, and it gave me #. Just wondering, does this root stick? ie. if i start flashing, I'm not suddenly going to "lose root"...like is this as valid a root as using gfree?
regards
trev
rockr4Christ said:
so...i finally got my phone rooted, i think. i used visionary after downgrading to 2.2.1, and i went into terminal, typed in su, and it gave me #. Just wondering, does this root stick? ie. if i start flashing, I'm not suddenly going to "lose root"...like is this as valid a root as using gfree?
regards
trev
Click to expand...
Click to collapse
if you only used the visionary app to root and not root.sh or gfree, then yes, you will lose root after a reboot. this kind of root is called a TEMP ROOT and that is all visionary.apk can give you if you haven't acquire S-Off with either the root.sh or gfree method.
I used the perm root, and i have rebooted it twice, and still have root... thats why I'm asking .
I would check s-on, or s-off, but I can't get into recovery (shows little red triangle). Should i flash an engineering boot loader if Im just going to flash CWM anyways?
Regards
Trevor
Ps, thank you for patience and helping a self admitted n00b out
rockr4Christ said:
I used the perm root, and i have rebooted it twice, and still have root... thats why I'm asking .
I would check s-on, or s-off, but I can't get into recovery (shows little red triangle). Should i flash an engineering boot loader if Im just going to flash CWM anyways?
Regards
Trevor
Ps, thank you for patience and helping a self admitted n00b out
Click to expand...
Click to collapse
it shows if you have S-off in the bootloader
just power off your phone, and turn it on using the Power and Volume DOWN buttons.
IMO, i would flash the engineering bootloader, just to be on the safe side. who knows? someday it might save you
if i have helped, please hit thanks!
weird. i got it into hboot...and s'on. any ideas?
regards
trevor
rockr4Christ said:
weird. i got it into hboot...and s'on. any ideas?
regards
trevor
Click to expand...
Click to collapse
which method of perm root did you use? root.sh or gfree?
i did the visionary perm root. isn't that the root.sh? i followed the guide here on the forums..
trev
rockr4Christ said:
i did the visionary perm root. isn't that the root.sh? i followed the guide here on the forums..
trev
Click to expand...
Click to collapse
visionary and root.sh are two different things.
visionary only gives you root access while the root.sh script is the one that actually gives you the S-Off so that you can perm root.
here, try this link

Categories

Resources