Related
Guys, this is just to fill a request on my website
It is used to send a Class 0 SMS. It's used in exactly the same way as VJSMSSender from VJPhoneTools.
Class 0 SMS, for those who don't know, is an SMS that is sent directly to the recipient's phone and will appear immediately on the screen, without requiring the recipient to go into the Inbox. Also, the SMS is not saved in the inbox, so there is no trace of it on the phone.
Great for illicit affairs!
Please use it responsibily, I don't know if there are any special rules about Class 0 SMS, but if there are any objections I'll remove it.
Check it out on my website
V
Hi Vijay,
another fine release.. )))
THANX mate.
How you do them all ??? ))))
BTW, why would you remove it from your website?? Flash SMS is perfectly legal AFAIK.
THANX
buzz
I'm sure it is legal, but it's quite scary how it works! I love it, I'll be freaking out all of my friends... oh, what friends :shock: too much programming!
How you doing Buzz. Been quite for a while... must mean good things on their way?
V
vijay555 said:
I'm sure it is legal, but it's quite scary how it works! I love it, I'll be freaking out all of my friends... oh, what friends :shock: too much programming!
How you doing Buzz. Been quite for a while... must mean good things on their way?
V
Click to expand...
Click to collapse
YEAH!
i'm totally overloaded in work... i ave absolutely no time for my stuff... (
...but i've got some GOOD news for tomorrow.. ))
buzz
Where is this program? I cant seem to find it in your site Vj...
I am curious of how it work :wink:
What about allowing a different sender ID? E.g. another number or text.
It's there : http://www.vijay555.com/index.php?Releases:VJPhoneTools:VJSMSSender_Class0 :wink:
Good things from Buzz.....
Is that combining the extrom to storage on the Universal?????
Cheers,
chris_khho said:
Good things from Buzz.....
Is that combining the extrom to storage on the Universal?????
Cheers,
Click to expand...
Click to collapse
)
hi Chris,
the good news is HERE
buzz
Chatty said:
What about allowing a different sender ID? E.g. another number or text.
Click to expand...
Click to collapse
Yes that would be a great idea if it could be done.
vijay555 is this possible ?
TraumaTiger
Hum, how do i run this app? command line how? Can someone explain thanks.
q-biq:
download and install VJPhoneTools
http://www.vijay555.com/index.php?Releases:VJPhoneTools
and check out the page for instructions on how to use VJSMSSender.
Then, the class 0 prog works in exactly the same way as VJSMSSender.
Use GSFinder etc to make appropriate shortcuts, or use a today launcher like cLaunch etc.
TraumaTiger/Chatty: I think I could write an SMS spoofer, but I don't think it's wise. I will try to write it anyway for the fun of it (!) and tell you if it works...
V
oh koool. workin great, but do i need to change the shortcut evry time i need to send to a new phonenumber? takes to long time hehe..
and how have you created the icons on the top so i can send from there?
Once again..
VJ its possible to send to more than one recipient at the same time ?
thank you
q-biq: yep, the shortcut needs to be changed each time. It's more for use on a today screen: it was requested that you could eg send a msg to your wife on the way home with no key presses etc. VJSMS still requires you to press send, while VJSMSSender sends it straight off, so yes, it has to be manually configures each time.
More that that and it would have to work like a replacement for the inbox, and that's not what it's for (right now! perhaps in the future).
fcaeiro: no, I'm afraid VJSMSSender doesn't have a CC feature. I could try to look into it a some point, but I haven't thought about it right now...too busy coding other stuff! :shock:
V
It's definately possible to spoof the sender ID - Siemens S25 tools offered it already (if you remember that old handset).
can you explain howto spoof id??
SMS ID spoofing is easy enough in theory. I will try to write it, and if it works, I'll take feedback on whether it deserves releasing. But let me write it first
V
vijay555 said:
SMS ID spoofing is easy enough in theory. I will try to write it, and if it works, I'll take feedback on whether it deserves releasing. But let me write it first
V
Click to expand...
Click to collapse
Yaaa it good if our ID, phone number not appear...or with spoof ID...
waiting for ur progress Vijay555...
With Vodafone.se you can just put a -A- in the begining of the sms to hide your number.
Basically I am looking for some software which, on receipt of an SMS will initiate an outbound call to a number in the contact list on the phone.
something along the lines of :-
SMS received from 1-555-5555 containing the word CALLBACK and a password.
Phone then dials 1-555-4444 or any specific contact as defined in its config
it doesn't have to use the contact list but must be triggerable remotely.
Target device is a HTC Hermes. and possibly a StarTrk
The program doesn't need to be stealthy, it's to initiate the call with full permission from the owner but without intervention.
Partly it's for my grandfather, if I give him a Startrk then I want to be able to activate a call remotely if I get notified that he has triggered his medicalert system, so I can try to see if he is ok without him having to answer a call.
I googled, and found nothing, I'm hoping someone here can either write an app that can do what I need, or suggest a product that will enable me to do this.
Auto answer is too generic, I want it to be just for myself and not all callers, and the password is because there may be times I just want to send a generic SMS
Sounds like you are talking about an SMS Callback trigger, though I have never heard of a mobile based one.
I always seem to want the impossible or the unwritten maybe it's time one was written?
Crash Override said:
I always seem to want the impossible or the unwritten maybe it's time one was written?
Click to expand...
Click to collapse
just unwritten, it's not impossible
pretty easy actually
i'll try to throw some together this week if/when I have the time
try this
Just place it on the phone and edit the config.ini if needed default settings are:
trigger = CALLBACK
password = pass
I tested this on my TyTn2, and it seems to do what you wanted, the program will activate the speaker when calling (can be changed in the config.ini)
this way if your grandfather cannot reach the phone he still be able to talk..
But test it before use, I'm not sure how sensitive the mic of the phone is.
I do like the idea so I'll probably add some more functionality
- auto pickup on call from fixed number
- status
- call/sms log
Let me know what you think.
PS. this was created for a touch screen device not a smart phone...
also I can not be held responsible for damages, phone bills etc.
but that goes without saying ..right
-=edit=-
tested by sending an SMS to myself, the program then called my number, but when i tried with a friends phone it didn't work
let me know if it works for you (if you have 2 phones)
also make sure if the number you send it from is in your phonebook or not (could be the issue)
-=edit=-
that is the issue, working on it
Issue solved
now I need to figure out how to replace the attachment
I'll add it in a new post
I also believe SKSchema can do this in watch mode. Actually SKSchema can do lots of cool things in watch mode.
new version attached
-=edit=-
build a cab, also added apptodate support
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
example - if I am in the US I will have the number 1-555-1234 but my grandfather is in the UK - +44-555-5555
I run a voip line with a UK DID number such as +44-555-6666 so when the SMS is received from 1-555-1234 the return call goes to the +44-555-6666 instead of the US Cellphone (cost reasons lol, UK landline free, international call of any length = US national debt)
Here is a SMS Trigger I built, do not know if that satisfy you.
Check rk-SMSSwitch under my signature.
Crash Override said:
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
Click to expand...
Click to collapse
yes you are right, don't know how i could have overlooked that
I'll fix this in the next version
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Mr_Gee said:
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Click to expand...
Click to collapse
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
timwb said:
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
Click to expand...
Click to collapse
Sorry, i just noticed this reply
To be honest i wasn't planning on creating one, but i could give it a shot
the biggest problem is i don't have a Smartphone to test it on..
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
timwb said:
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
Click to expand...
Click to collapse
I already checked eBay, and there might be some good ones but I don't want to overpay
I'll keep it in mind
Attached is the same program but compiled for a smartphone, I'm not sure if it will work, I remembered I have an emulator for smartphone installed, but I received an error message when running the exe.., I think because the CF.NET wasn't installed..
let me know
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
timwb said:
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
Click to expand...
Click to collapse
Currently that is the program
Could you try to edit the ini file?
in case you have 2 phones, add the number from the 2nd phone in the file
save and run the program
send an sms from the 2nd phone with the passcode mentioned in the ini file
your 1st phone should call this number after the SMS receipt
I know the program doesn't look like much but i might fix this in the future
when i do i'll also look at the exit button.
the reason i didn't was because the application was for an older person,
this person could be playing around with the phone accidentally closing the program ...
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Could you just not set his phone to auto answer ? - that way you can call him any time.
timwb said:
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Click to expand...
Click to collapse
not really, assuming it works maybe it has to do with the formatting,
Callback should be in capitals and pass in lower letters.
when I tested this with my TYTN2 it worked the way it should.
also did you enter the default number ? e.g. the number that will be called?
PauloJ5 said:
Could you just not set his phone to auto answer ? - that way you can call him any time.
Click to expand...
Click to collapse
[sarcasm]
Gee why didn't I think of that...
[/sarcasm]
Seriously have you read the thread?
the topic starter didn't want it this way for several reasons...
Default number and closed flip
I didn't enter a default number because I want it to respond to any number that sends the text. I deleted the DefaultNumber line from the config and it worked, to a point. The phone I'm running it on is a Qtek 8500/HTC StrTrk, which for those who don't know, is a flip phone. My problem is this, if the phone is closed when the text is received the call is made but cut off immediately because the phone is set to hang up calls on closing. Nowhere can I find a setting to stop this from happening, anybody have any ideas?
Hi All,
First question from me. I have just moved to the TD2 from nokia n95. On the N95 you could set it so that is would say the callers id when they rang. So, I had a short ring tone that would play, then it would say the name and cycle.
Does any body know if it is possible (or how to do it) on the TD2.
thanks for your help and ideas.
cheers
Use Voice Command...START-SETTINGS-PERSONAL-VOICE COMMAND
if it is installed on your device.
thanks jdwilson,
it is not installed on my device - do you know how I would get it?
Search on this forum or Google.
Well, I have got it installed and working for everything but the caller id (despite all the things ticked and setting the bits from other threads). If anybody has any great ideas they will be welcomed, but I will play.
It certainly allows a gap in the tone, but the phone is silent, then the tone starts up again, so I think it is trying to do it.
Use this:
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=673
But can it be used on other ROM versions?
I was never clear what, exactly, this update did - and since HTC said it could only be applied to a ROM version that pre-dated mine (and 6.5) I never found out!
If this 'fixes' any issue for Caller ID is it applicable to WM6.5???
thank fighter for the suggestion, but my rom version is not suitable
Read this:
http://forum.xda-developers.com/showthread.php?t=561303
thanks again fighter, my caller id displays fine it is just not annouced.
When you open Voice Command, and select the phone option, on the right side of the screen, is a notification button, select that, then you will have 3 options for the announcement, make sure you select the one you want.
Yes, I have tried all of the options in notification, thanks. I will keep digging.
NetCallerID does not work in all countries and has no audio, but as an alternatieve;
http://www.freewarepocketpc.net/ppc-download-netcallerid.html
billkelly said:
Yes, I have tried all of the options in notification, thanks. I will keep digging.
Click to expand...
Click to collapse
Hi What is the version on MSVC? hope you installed in RAM itsef and not in storage. try uninstall and install again - soft reset.. after that in VC notifactions choose second or third option .. it should work
Hope this will help
billkelly said:
Well, I have got it installed and working for everything but the caller id (despite all the things ticked and setting the bits from other threads). If anybody has any great ideas they will be welcomed, but I will play.
It certainly allows a gap in the tone, but the phone is silent, then the tone starts up again, so I think it is trying to do it.
Click to expand...
Click to collapse
Take a look here, I hope it will solve your problems http://forum.xda-developers.com/showthread.php?t=619358
You can also download the cab file from here: http://forum.xda-developers.com/showpost.php?p=5485644&postcount=44
I never tried the cab but it should work.
Thanks for the help.
my version is 1.60.4622.0
I have tried most of the settings in the first link (and some others in another thread).
The control cab generates errors (I have installed mortscript)
I was wondering if the system was not putting the ttscallerid.wav in the volatile, so I am trying to search the the phone for the file, I have not found it yet - using activesync and explorer.
Still digging, but the other features are quite good.
Hi, the title contains pretty much everything.
The glass on top of the screen is shattered and therefore touch input isnt working..
Id like to know if i can send the unlock code via my computer.
current rom: cronos 1.3 with ben10 kernel
thanks!
You can use androidscreencast ( http://code.google.com/p/androidscreencast/ ) to control the phone from PC and click the buttons
thanks! will try that out
k0rner said:
You can use androidscreencast ( http://code.google.com/p/androidscreencast/ ) to control the phone from PC and click the buttons
Click to expand...
Click to collapse
Niiice,... This may come in handy one day. Thank you.
indeed it will, but i also found another simple way for my problem..
remove the pin code by putting the sim card into another device -_-
Himcor said:
indeed it will, but i also found another simple way for my problem..
remove the pin code by putting the sim card into another device -_-
Click to expand...
Click to collapse
Haha,... I was gona suggest that but thought its too obvious an answer! Funny.
Hello,
I was wondering if there is a way to print or send to an excel file the list of calls made or received?
Another thing, is there a way to control the time of ONLY calls that you've made? If I go to the calls counting (in Portuguese "Contadores de Chamadas") I have the registry of ALL calls made and received. I can't control the time that I've spent where I've started the call (that can be very useful if you have minutes to spend), I only know the time spent on the phone.
Thanks in advance
I am also looking for a way
http://forum.xda-developers.com/showthread.php?t=676123
teriero said:
I am also looking for a way
http://forum.xda-developers.com/showthread.php?t=676123
Click to expand...
Click to collapse
The only help I know:
Phone.Dashboard.Minute.Tracker.v1.1.7.
bib*oops said:
The only help I know:
Phone.Dashboard.Minute.Tracker.v1.1.7.
Click to expand...
Click to collapse
And this app will work on WM6.5? I've made a google search and the last version found was 2.0.1 and I see that this application was made in 2007
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Yes it does !
rvrosa said:
And this app will work on WM6.5? I've made a google search and the last version found was 2.0.1 and I see that this application was made in 2007
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Click to expand...
Click to collapse
I'm using this program now for some years, and it works perfectly on almost all WM versions !
I started with WM2003 and now on my Mega with WM6.5 it still works perfectly !
My present version is 2.0.1.
Regards
cimber
The program works very well for the Mega.
But how to save the call log (Call log) on a PC?
Export
teriero said:
The program works very well for the Mega.
But how to save the call log (Call log) on a PC?
Click to expand...
Click to collapse
Just transfer the *.csv file via activesync or any filemanager to your PC.
Regards
cimber
Good program.Thank you and greet
Where can I get this program? Is there a link to download?
Thanks
rvrosa said:
Where can I get this program? Is there a link to download?
Thanks
Click to expand...
Click to collapse
http://www.pocketgear.com/de/usd/3685431,product-details,Phone-Dashboard-Minute-Tracker.html
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
I’ve searched on all programs but nothing…
And I’m sure it’s installed because it appears on the “uninstall programs” as HudsonMobile PhoneDashboard.
Any suggestions?
Did you the following ?
As far as I remember, it was necessary to make a softreset on this program after installation.
Otherwise it's depending on your user interface, what you need to do.
For sure you can find the program either in the directory "programs" or a localized name e.g.
in german "Programme"
and a link in the following directory "windows/autostart".
If its not there, you need to make a link to there.
Regards
cimber
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
Cause to view it you need to disable TouchFLO and turn on Phone Dashboard.(settings/today/Items)
Phone Dashboard is a plugin "naked" today screen.
Unless you use an alternative overlay interface f.ex.SPB MShell-then simply tap the "show today".
Alternative:ShellSwitcher http://forum.xda-developers.com/showthread.php?t=675903
teriero said:
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
Cause to view it you need to disable TouchFLO and turn on Phone Dashboard.(settings/today/Items)
Phone Dashboard is a plugin "naked" today screen.
Unless you use an alternative overlay interface f.ex.SPB MShell-then simply tap the "show today".
Alternative:ShellSwitcher http://forum.xda-developers.com/showthread.php?t=675903
Click to expand...
Click to collapse
Please elucidate me
First I install the Phone.Dashboard.Minute.Tracker, then when I need to use it I have to change from TouchFlo to Phone Dashboard?
But if I use the TouchFlo the program is working and registering all, right? To see it I only need to turn TouchFlo off, right? Or I can no longer use TouchFlo?
Don't exist another program to control the time used in calls that don't need all this? I think is something so simple compared to other things that WM can do...
Thanks
rvrosa;Don't exist another program to control the time used in calls that don't need all this? I think is something so simple compared to other things that WM can do...Thanks[/QUOTE said:
If you're mainly TouchFLO, I recommend Festinger Historia.
After registration, you can try freeware version 1.11.
http://www.festinger.net/
Click to expand...
Click to collapse
teriero said:
If you're mainly TouchFLO, I recommend Festinger Historia.
After registration, you can try freeware version 1.11.
http://www.festinger.net/
Click to expand...
Click to collapse
I don't like or dislike touchLFO... I don't know or ever used something else to know if it's better or worst. I had a Nokia 1100 and I've bought this phone with touchFLO... To me is OK since it works.
Do you think there exist better than touchFLO? Give me some links that I can look
About this festinger I'll give it a look to see.
Thanks
Ok, I've downloades festinger (v.3.1.2) and tried it.
Good but not so good...
The registration is month by month. If I charge my phone on day 10 or 15, or more than once each month I can't get the info I need.
It should let me choose the period to show.
Historia became Free!
Hi, I'm happy to announce that all versions of Historia are now freeware. feel free to download and install it.
Thank you for sharing
Thank you for sharing.Best regards Ronenfe.
rvrosa said:
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Click to expand...
Click to collapse
Touch2 Has it's timer for calls too .... Start =>> Settings =>> System =>> Device Information =>> Call Duration ... Outgoing and Incomming ... i think this is what u're lookin for ?