Related
I came up with the following idea. Please tell me what you think about it.
Let's say you have the imsi and ki codes of one or more sim cards. Wouldn't it be nice to use the phone with no sim inside?
This would mean that the sim driver would need to redirect input/output to a custom app which would emulate a green/silver card.
I have programmed apps for the pocket pc but this is way out of my abilities.
I would appreciate some comments
Impossible I'm afraid. The SIM card holds something called the Ki or Authentication Key that is impossible to retrieve using a smart-card interface.
The Phone actually sends data to the SIM which is then cryptographically signed with this key as part of registering you on the network.
More info here: http://en.wikipedia.org/wiki/Subscriber_Identity_Module
philjohn said:
Impossible I'm afraid. The SIM card holds something called the Ki or Authentication Key that is impossible to retrieve using a smart-card interface.
The Phone actually sends data to the SIM which is then cryptographically signed with this key as part of registering you on the network.
More info here: http://en.wikipedia.org/wiki/Subscriber_Identity_Module
Click to expand...
Click to collapse
Thanks for the input but this won't be the problem.
Mechanisms exist that can extract the necessary codes from comp128v1 sims (imsi and ki).
This is how sim cloning works.
I already have these numbers of my sim card and I can already duplicate it.
You only need a card reader, no expensive hardware
great idea, hasn't the windows mobile sdk something similar?
andrew_sh said:
I came up with the following idea. Please tell me what you think about it.
Let's say you have the imsi and ki codes of one or more sim cards. Wouldn't it be nice to use the phone with no sim inside?
This would mean that the sim driver would need to redirect input/output to a custom app which would emulate a green/silver card.
I have programmed apps for the pocket pc but this is way out of my abilities.
I would appreciate some comments
Click to expand...
Click to collapse
Absolutely impossible. This would require radio hacking which requires lots of time, and would be device-specific.
hi plz share the software .
andrew_sh said:
I came up with the following idea. Please tell me what you think about it.
Let's say you have the imsi and ki codes of one or more sim cards. Wouldn't it be nice to use the phone with no sim inside?
This would mean that the sim driver would need to redirect input/output to a custom app which would emulate a green/silver card.
I have programmed apps for the pocket pc but this is way out of my abilities.
I would appreciate some comments
Click to expand...
Click to collapse
hi plz share the software
and can we use it on ppc (WM6)
hi plz share the software
and can we use it on ppc (WM6)
Click to expand...
Click to collapse
LOL ...WM2003SE too, and what about WM Photon? and PPC2K?? ROFLMAO
shantzg001 said:
LOL ...WM2003SE too, and what about WM Photon? and PPC2K?? ROFLMAO
Click to expand...
Click to collapse
will it run on my nokia/SE/Motorola???
Would be a wicked idea if it could be pulled off
Hello i just saw in one of the threads something about the white screen isue and i disassamble my tytn to repair this isue but i found this thing to test it says that it boots up once with bootloader but here it says that comes on the Micro SD card (provided by HTC) is there a way to download this software from someware?
http://inuchanbt.blog54.fc2.com/blog-entry-100.html
That my friend is the philosopher stone of the Hermes community... You hear about it but you just can't seem to find it on ANY site.... Apparently its supplied to the techs on an sd card but NO-ONE seems to have, or been able to, upload the software.
Cheers...
Hey guys!
Try here: http://8g.cn/Search.aspx?Keywords=htc
I found the UN-Findable Trindiag.nbh here. I was amazed after searching for 2 years, it was here.
Anyways, be sure to browse all 125 items. You can change pages at the bottom. Not sure what it says, since it's Chineese, but I was able to fumble my way through it.
Also, for more info, try changing the tab at the top of the search window and run the search again. I've found more stuff that way.
Profy_X said:
Hello i just saw in one of the threads something about the white screen isue and i disassamble my tytn to repair this isue but i found this thing to test it says that it boots up once with bootloader but here it says that comes on the Micro SD card (provided by HTC) is there a way to download this software from someware?
http://inuchanbt.blog54.fc2.com/blog-entry-100.html
Click to expand...
Click to collapse
white screen fix watch the video http://www.youtube.com/watch?v=jJ1kRg7wLhM&feature=related
ultramag69 said:
That my friend is the philosopher stone of the Hermes community... You hear about it but you just can't seem to find it on ANY site.... Apparently its supplied to the techs on an sd card but NO-ONE seems to have, or been able to, upload the software.
Cheers...
Click to expand...
Click to collapse
In time things lose their mystery and turn up!:
hermdiag.nbh
Note this file is the diagnostic nbh, NOT to be confused with nbh files of the same name created by some ROM Chefs. They use this same name because the device automatically looks to load files by this specific name in preference to loading pre-installed software on the phone.
Mike
mikechannon said:
In time things lose their mystery and turn up!:
hermdiag.nbh
Note this file is the diagnostic nbh, NOT to be confused with nbh files of the same name created by some ROM Chefs. They use this same name because the device automatically looks to load files by this specific name in preference to loading pre-installed software on the phone.
Mike
Click to expand...
Click to collapse
Thanks Mike. I thought they would use the link above to get it, but I guess it sometimes needs to be handed to them on a Silver Platter...
Just Kidding guys!
SuperSport said:
Just Kidding guys!
Click to expand...
Click to collapse
Are you sure
So folks how about a nice Level 2.5 Schematic for the technically minded?
(Took a while longer - source protecting measures required)
Mikehttp://www.mikechannon.net/PDF Manuals/Hermes level 2.5 Schematic .pdf
mikechannon said:
Are you sure
So folks how about a nice Level 2.5 Schematic for the technically minded?
(Took a while longer - source protecting measures required)
Mikehttp://www.mikechannon.net/PDF Manuals/Hermes level 2.5 Schematic .pdf
Click to expand...
Click to collapse
I have a Hermes in pieces, due to a bad USB Port, so I don't need this, but it's still VERY cool anyways!
Yep, I'm sure. I'm so easy going that everyone thinks I'm a stoner... And I'm not, really! Don't actually like the stuff. Besides, being sick, the DR's are always handing me new pills, so no need to smoke.
hello. thanks for the file. but i am afraid i didnt understand how i will make that file work.
coderbie said:
hello. thanks for the file. but i am afraid i didnt understand how i will make that file work.
Click to expand...
Click to collapse
Copy it to the Root of your SD Card and enter BootLoader. But, be aware that it may cause a Hard Reset and possibly clear all your call counters. At least on the Trinity this is how it acts.
Also, be aware that it may cause other damage not mentioned, so use at your own risk... I've used the Trinity & Kaiser versions with no damage, but just know this in case.
SuperSport said:
Copy it to the Root of your SD Card and enter BootLoader. But, be aware that it may cause a Hard Reset and possibly clear all your call counters. At least on the Trinity this is how it acts.
Also, be aware that it may cause other damage not mentioned, so use at your own risk... I've used the Trinity & Kaiser versions with no damage, but just know this in case.
Click to expand...
Click to collapse
thank you.
SuperSport said:
Copy it to the Root of your SD Card and enter BootLoader. But, be aware that it may cause a Hard Reset and possibly clear all your call counters. At least on the Trinity this is how it acts.
Also, be aware that it may cause other damage not mentioned, so use at your own risk... I've used the Trinity & Kaiser versions with no damage, but just know this in case.
Click to expand...
Click to collapse
Hi there, I've been trying to locate the Diagnostic file for the Excalibur/T-Mobile Dash, do you have or know where I can find it?
Thanks a million
[email protected] said:
Hi there, I've been trying to locate the Diagnostic file for the Excalibur/T-Mobile Dash, do you have or know where I can find it?
Thanks a million
Click to expand...
Click to collapse
I have no way of testing, but it appears this might be what you are looking for?
[email protected] said:
Hi there, I've been trying to locate the Diagnostic file for the Excalibur/T-Mobile Dash, do you have or know where I can find it?
Thanks a million
Click to expand...
Click to collapse
Can't find that at the moment. This may be of use to some folks:
http://www.mikechannon.net/PDF Manuals/Excalibur Series MB Repair Guide AX03.pdf
Mike
PS I know were in the wrong forum for this!
mikechannon said:
In time things lose their mystery and turn up!:
hermdiag.nbh
Note this file is the diagnostic nbh, NOT to be confused with nbh files of the same name created by some ROM Chefs. They use this same name because the device automatically looks to load files by this specific name in preference to loading pre-installed software on the phone.
Mike
Click to expand...
Click to collapse
Does anyone make it runs on an HTC Tytn? I can't start it in my machine with any bootloader I've tried. I always get the same error: No Image File!
A7275 / Vision
Any chance someone has the diagnostic files for the Vision (specifically, the A7275) ??
I got my activation code a couple minutes ago and decided to swap out my 2gb sd card for a 16gb one. After I popped it in, I had to setup my phone again, which I figured would happen, but then it said something about low storage, so I figured I needed to reflash the rom so WP7 would partition the new sd card in whatever manor it does.
My question is, now that I have an activation code, do I need to run Chevron and unlock the phone again or can I just put the activation code in and start downloading apps? My only concern is I've now used my activation code twice, so I don't want to hit the limit without doing this all correctly :/
AFAIK, it associates your IMEI with your Live account, so it should just work..
I find it hard to believe that the activation code will stop working if you try to use it again with the same live account.
I did reflashm, and activation code worked no problem
RickAstley said:
AFAIK, it associates your IMEI with your Live account, so it should just work..
I find it hard to believe that the activation code will stop working if you try to use it again with the same live account.
Click to expand...
Click to collapse
Some mentioned it in a thread at one point, but I've read that people have used their code 3 or even 5 times, so I may just be overly paranoid about it haha.
Laynee1 said:
I did reflashm, and activation code worked no problem
Click to expand...
Click to collapse
Just tried it and it works fine! Thanks so much man
One last question: Since I put my new sd card in before reflashing, did that mess up how WP7 partitions it when I eventually did reflash? Or was WP7 not recognizing the new sd card anyway since it was put in after the initial flash, causing WP7 to not see it, hence the "low storage" message I ended up getting?
I have used it at least 5 times over. I doubt you will have any issues. Its just the code associated to your account. They dont monitor that, its just a key for service.
Improve said:
I have used it at least 5 times over. I doubt you will have any issues. Its just the code associated to your account. They dont monitor that, its just a key for service.
Click to expand...
Click to collapse
I agree.. i think it's linked to your Live ID.. So when you sell the phone, the buyer should get a new key from MS for his Live ID and you can use the same key for your new phone. Correct me if am wrong.
21031980 said:
I agree.. i think it's linked to your Live ID.. So when you sell the phone, the buyer should get a new key from MS for his Live ID and you can use the same key for your new phone. Correct me if am wrong.
Click to expand...
Click to collapse
Ooo, that's pretty awesome, though I doubt I'll ever sell my HD2, this guy is a beast haha.
Oooone last question and sorry that it's slightly off topic: I'm trying to download stuff from the Marketplace, but I get this message "we can't get this info check back in a little while". Is this something that will work in a few minutes, or is there something I need to do, like change the reg or something?
can u guys tell me how can we talk with MS service? Cause I fone them already, and they ask me alot of informations: home, fone, IMEI ..... but i m not sure we can use HD2's IMEI or not, cause I told them I use HD7 2nd. So dont have active code T_T
Some1 plz tell me what exactly I have to tell them to get the code.
Thank you
APJG said:
Ooo, that's pretty awesome, though I doubt I'll ever sell my HD2, this guy is a beast haha.
Oooone last question and sorry that it's slightly off topic: I'm trying to download stuff from the Marketplace, but I get this message "we can't get this info check back in a little while". Is this something that will work in a few minutes, or is there something I need to do, like change the reg or something?
Click to expand...
Click to collapse
You need to do the registry hack so your phone is recognized as a HD7 t9292
the support guy told me to place the code at a safe place because i can use the code again if i need after a phone reset or something else
so i think there is no limit
APJG said:
Ooo, that's pretty awesome, though I doubt I'll ever sell my HD2, this guy is a beast haha.
Oooone last question and sorry that it's slightly off topic: I'm trying to download stuff from the Marketplace, but I get this message "we can't get this info check back in a little while". Is this something that will work in a few minutes, or is there something I need to do, like change the reg or something?
Click to expand...
Click to collapse
you have to do nothing...just wait...the marketplace has at the moment some problems
-> http://wmpoweruser.com/zune-services-offline-now-microsoft-working-on-it/
Windows Phone 7 Market problem
i have flashed wp7 and have activation code; but i cant download any files from market,
"There is a problem completing your request.Try again later.
Error code:c101a420
Solved:
Arturo You wont have any problems getting your apps back. Just browse to them in the Marketplace and re-install. That feature seemed to be working even while attempting to download new apps returned c101a420 error code.
http://social.answers.microsoft.com...7/thread/a20fe082-cf95-4c5a-9bd0-f87637339194
thinhletien said:
can u guys tell me how can we talk with MS service? Cause I fone them already, and they ask me alot of informations: home, fone, IMEI ..... but i m not sure we can use HD2's IMEI or not, cause I told them I use HD7 2nd. So dont have active code T_T
Some1 plz tell me what exactly I have to tell them to get the code.
Thank you
Click to expand...
Click to collapse
It may depend on who you talk to. I called after I ran Chevron, so in the settings in my phone it said "HD7", though I'm not 100% sure if that makes a difference.
I called, they asked for me first name, then last name, then phone number, and then if I have ever called MS before. They asked what the problem was, I said I'm trying to add my @live email and go to the Marketplace, but it says I need an activation code and I don't know what that is. The woman asked if I was using WP7 and I said yes. She said something along the lines of "Ohhh, ok, that's why you need the code." She said it would take a minute to generate one for me, so I waited a bit and she asked what brand my phone was. I said HD7 and she seemed confused, so I then said HTC HD7 and she understood that. A couple minutes later she read the code to me so I could write it down, then I read it back to her to double check and that was it!
I've read about other people having to give numbers from the back of the phone or other specific details, but I didn't have to do any of that for whatever reason
thinhletien said:
can u guys tell me how can we talk with MS service? Cause I fone them already, and they ask me alot of informations: home, fone, IMEI ..... but i m not sure we can use HD2's IMEI or not, cause I told them I use HD7 2nd. So dont have active code T_T
Some1 plz tell me what exactly I have to tell them to get the code.
Thank you
Click to expand...
Click to collapse
someone told them the imei of the desire hd...just try it
or you phone them several times till someone dont want to know this information
mattfmartin said:
You need to do the registry hack so your phone is recognized as a HD7 t9292
Click to expand...
Click to collapse
0711 said:
you have to do nothing...just wait...the marketplace has at the moment some problems
-> http://wmpoweruser.com/zune-services-offline-now-microsoft-working-on-it/
Click to expand...
Click to collapse
I figured I'd have to do that reg hack. I may wait a bit though just to see if it ends up working anyway for whatever reason.
Thanks so much guys!
kendimce said:
i have flashed wp7 and have activation code; but i cant download any files from market,
"There is a problem completing your request.Try again later.
Error code:c101a420
Click to expand...
Click to collapse
same thing
0711 said:
you have to do nothing...just wait...the marketplace has at the moment some problems
-> http://wmpoweruser.com/zune-services-offline-now-microsoft-working-on-it/
Click to expand...
Click to collapse
APJG said:
I figured I'd have to do that reg hack. I may wait a bit though just to see if it ends up working anyway for whatever reason.
Thanks so much guys!
Click to expand...
Click to collapse
You do have to hack the registry so your phone appears as a HD7... A lot of apps won't download until you do that. There's directions all over to do that. There shouldn't be any wait time after getting your code. If your phone doesn't appear as a HD7 when you look at the info on your phone, you will get that message when trying to download apps.
seems live id can't be deleted
zarathustrax said:
You do have to hack the registry so your phone appears as a HD7... A lot of apps won't download until you do that. There's directions all over to do that. There shouldn't be any wait time after getting your code. If your phone doesn't appear as a HD7 when you look at the info on your phone, you will get that message when trying to download apps.
Click to expand...
Click to collapse
Yep, you're right! Just did the reg hack and everything downloads fine, thanks!
Guys I am using Yuki's ROM for a day,and is awesome . Just one little question: In any ringtone vibrations work just on the beginning at the ringtone and that's it. But when in silent mode it is vibrating OK. Is this normal? Because I could not find any settings except vibration ON/OFF.
P.s I have serial for activation (called Microsoft and they gave me one ), and I wonder If I switch the ROM can I use the same serial?
TnX
Thats how vibration works in WP7.
Yes you can use your serial more than once
TnX mate for answering
About entering the serial
B4PJS said:
Thats how vibration works in WP7.
Yes you can use your serial more than once
Click to expand...
Click to collapse
B4PJS, I have one more question for you if you do not mind: I have read on several Wp7 threads, that for entering a serial provided by Microsoft requires special procedure editing some .XAP (that is provided by the Chef) and side-loading to our HD2. But I just enter in live service(for setting up my Hotmail account), I typed the serial and it works. Did I do something wrong?
no need, it is to make it simpler than the boring process of typing on screen
pakure said:
no need, it is to make it simpler than the boring process of typing on screen
Click to expand...
Click to collapse
Oh, I get it now, it is the same thing, . TnX man
Hello again, nookies. (Yeah, I know I've been posting a lot )
I have yet another question. I just brought myself up to speed on the shell and SQLite and all that stuff, and thought Hey! Why not try out my new skills by following the directions here to put a PIN lock on my Nook?
So I followed the instructions (they worked great, kudos to Renate NST!), got my code all set up, and I'm liking it. BUT, I have one thing that I'd love to improve, and here it is:
Could we make BOTH of the available lockscreen mechanisms (slide and PIN) work together at the same time, like iOS does? If so, I'm sure everyone would love it, because if we had the slide before the PIN input then no non-user-created touches (i.e, a case or book bag) would enter the wrong code over and over, and we wouldn't have the problem that jasonmehmel did over at the aforementioned thread.
Can we get this to work?
Thanks,
ThirdNookie
Usually the lock screen is only one or the other.
The default for us is the slide or the pin code.
Renate NST said:
Usually the lock screen is only one or the other.
The default for us is the slide or the pin code.
Click to expand...
Click to collapse
Yes, I do understand that.
Basically, I'm just asking if there's any way AT ALL to get them to work as posted above.
What say you?
Like everything else, you'd have to write it.
It would be a bit of code.
Renate NST said:
Like everything else, you'd have to write it.
It would be a bit of code.
Click to expand...
Click to collapse
Right. Duh me, eh? :laugh:
I'd totally do it, but in all seriousness I don't have time. High school is hard, hard work, and I have much less posting/developing time. Might you please do it?
Feel free not to.
Renate said:
Usually the lock screen is only one or the other.
The default for us is the slide or the pin code.
Click to expand...
Click to collapse
Oh ... I had a golden period recently where I lived the luxury of living with the slider as well as the PIN ... I just lost it ... have been trying to get it back since then ... but with little luck ...
I just wish i had taken a video of that period of bliss with both options working one after the other ...
@nmyshkin ... it did work ... for sometime ...
aiamuzz said:
Oh ... I had a golden period recently where I lived the luxury of living with the slider as well as the PIN ... I just lost it ... have been trying to get it back since then ... but with little luck ...
I just wish i had taken a video of that period of bliss with both options working one after the other ...
@nmyshkin ... it did work ... for sometime ...
Click to expand...
Click to collapse
A mystery wrapped in an enigma.