can anyone help me.Windows XP SP3 I can not extract rom.zip from the official firmware. Because if I run RUU.exe it after a while (10 seconds) all disappears Local>temp. In Windows Vista everything works.
Have you try to swap Hboot from 2.1 and 2.2?
Think you can change the. Exe to. Zip and do it that way
Sent from my HTC Wildfire using Tapatalk
thanks, but none
Rom extraction works for me even on XP MODE virtual machine. The path to be checked is "C:\Documents and Settings\USER NAME\Local Settings\Temp".
That might be due to other issues of ur pc . And AFAIK changing extension of exe to zip will not work (maybe bcoz exes are compiled archives).
And swapping hboot makes signature lost, so no success (or downgrade not possible).
bharatgaddameedi said:
Rom extraction works for me even on XP MODE virtual machine. The path to be checked is "C:\Documents and Settings\USER NAME\Local Settings\Temp".
That might be due to other issues of ur pc . And AFAIK changing extension of exe to zip will not work (maybe bcoz exes are compiled archives).
And swapping hboot makes signature lost, so no success (or downgrade not possible).
Click to expand...
Click to collapse
have you try to open HBoot from 2.1 or 2.2 by Hex editor and see what the difference between them ?
P.S.
(That came when you try to install Mac OSX on normal PC)
sergeicapone said:
have you try to open HBoot from 2.1 or 2.2 by Hex editor and see what the difference between them ?
P.S.
(That came when you try to install Mac OSX on normal PC)
Click to expand...
Click to collapse
No i haven't tried. Even if we find the differences, we can't edit the things and replace the content without loosing the signature. I think someone has tried it unsuccessfully.
bharatgaddameedi said:
No i haven't tried. Even if we find the differences, we can't edit the things and replace the content without loosing the signature. I think someone has tried it unsuccessfully.
Click to expand...
Click to collapse
I not gonna tell you where this idea came from ( long story), but we try.
Phone Wildfire Hboot 1.xxx S-OFF by xtc clip
What we have when we flash the rom.zip- HBOOT 0.80
1. Then try to put recovery clockwork-3.0.xxx
2. We load the phone, but not the network
3. then phone start to freze, and we have to roll back to buck up.
Problem maybe because hboot was from 2.1 Rus, but we need En-Tmob.
P.S.
DO NOT TRY THIS, YOU CAN BRICK YOUR PHONE.
Related
Hello, how i can emulate a rom in a pc xp computer?
tks
Hello, you can try MS Windows Mobile 6 Emulator. You will find it there : http://www.microsoft.com/downloads/...aa8-1dd7-426f-a913-4f370a65a582&DisplayLang=e
please let us know if in meantime you have some success.
I've been trying to to do the same but unfortunately without any luck.
ribasnet said:
please let us know if in meantime you have some success.
I've been trying to to do the same but unfortunately without any luck.
Click to expand...
Click to collapse
I'll keep you guys updated if it works with other roms or not.
I always wanted something like this, This is my change
The problem I have is I have no idea where the ROM or files are stored themelves. You can't "Flash A ROM" to the emulator (or at least i haven't figured out a way) as it won't connect to AS, and the emulator has no bootloader emulation.
This would be absolutely great for ROM cookers! Hope there would be a solution in the future!!!!
ElProempie said:
I'll keep you guys updated if it works with other roms or not.
I always wanted something like this, This is my change
Click to expand...
Click to collapse
I cant get the program to install.. Must be my pc. Time for a clean-up
Sorry guys. If i find something else, ill let you know.
i can connect flawlessly with Vista and XP both toactivesync and WMDC..but you cant emulate a ROM image becase it uese a .bin file extension for its rom..go into emulator config and you will notice
i guess we can enter the bootloader mode via mitty ... why didnt i think of this before
I believe you can dump a ROM to a *.bin file, so couldn't that be used for the ROM image? I can't get it to connect to activesync :S
yes i can dump the rom sucessfully also..but cant disassemble it as i cant find the correct offset code..tried all using dump.exe
so here we proudly present the HardSPL flash package
well, what this is good for - this enables flashing of custom roms (I try to explain only because I know many Shift owners here don't own other HTC devices).
SSPL and RUU patches have been made mostly by me, HSPL and package compilation have been made mostly by Olipro, so both are branded OliNex.
Please read and follow all instructions very carefully.
this has been tested (thanks thaihugo, et al.), but if you have problems then do let us know in this thread.
also, TO EVERYONE WHO BETA TESTED in the past: please do download this final version. it will flash an updated HardSPL to your device.
prerequisite: "liberated" Shift (i.e. has the usbtool on Snapvue side!).
[size=+1]STEP BY STEP INSTRUCTIONS:[/size]
1. Download the package from attachment in this post and extract the files from the zip somewhere on Vista.
2. Install the EnableRapi.cab file from the zip on Snapvue side. (of course do unzip in Vista first.)
3. Make sure Shift is on AC adapter and that the WMDC in Vista sees the Snapvue side!!! (use usbtool to turn USB on in Snapvue if necessary.)
4. Run the ShiftHardSPLFinal.exe on Vista. if you do not have UAC disabled, then please run it as Administrator!!!
5. It should pop up two cmd windows for a second. then it will pop up a box saying "Processing". at this point please check if Snapvue side went into black screen. if yes, then everything is OK so far, so press OK in the "Processing" messagebox.
6. After some more wait (and two more cmd windows - please allow them to run if Vista asks!), the Romupdateutility will launch automatically. Please press Next and so on, until it flashes the update.
7. The RUU should say success, and should hard reset the device. at this point your Shift has been HardSPL'ed - Congratulations!!!
TroubleShooting:
- if Vista errors out on pput.exe after step 4, make sure you launched the ShiftHardSPLFinal.exe as Administrator: right click on EXE and select "run as Administrator" option.
- if at step 5, you don't have black screen, the device might be asking you to allow to run a program on the Snapvue side. click Yes if prompted!
- if after step 5 the next cmd gets stuck at some USB disabling message, let us know. (it shouldn't get stuck but just in case.)
- if you wish to check it is really HardSPL'd now, use mtty and use info 2 command in it. it should return HTCS00000000something which means it is (fake) supercid and is HardSPL.
NOTE: never use the RUU from this SSPL package for anything else! this is special and is strictly for the HardSPL process.
to just flash ROMs after you installed HardSPL, you can use the original RUU or CustomRUU from this thread: http://forum.xda-developers.com/showthread.php?p=2098895#post2098895
also, first Custom ROM with GPS and with some tweaks/customizations (will also be liberated out of the box!) is to follow sometime this week. along with a radio Security/CID unlocker (patched radio image). then voice and maybe WVGA screen is to follow not much later.
you of course must have this HardSPL installed, or the ROMs will not flash!
enjoy
Let me be the first to say on behalf of us here:
THANK YOU!!!!!!!!!!!!!!!!
ALL HAIL CMONEX!!!!!!!!!!!!!!!!!!
Thanks you and all others in Shift Project
Wouhou !
Thanks !!! great news
I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?
Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?
Thanks Guys, appreciated!
after done this thing, is it possible to make voice call from Shift? sorry about that question, as I dont have much knowleague about rom and flash
noup. this will allow you to place the hacked rom (the hacked rom is still to be released) that would enable these features... and this without having the phone detect the "hack".
this is a way of telling it..
szjohnwong said:
I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?
Click to expand...
Click to collapse
oh, chinese shift... is the OS in all chinese? and the WM side?
anyway, that should not be a problem... if it still won't go on, press Ctrl+C to cancel this cmd, another will pop up, cancel that too, then the RUU will pop up. at this point, put vista to hibernate (don't try to shut down for now, it will make it harder to get it working that way). wait a few secs after it hibernated, wake up vista, then go on with the RUU.
btw if this is first time being in bootloader, it might first want to install drivers at this point. let it install them, then feel free to continue in the RUU.
another way to deal with the issue: shut down vista and remove battery. reinstall battery, boot both vista and snapvue, then start the process from step 1 again. battery removal and fresh boot of vista afterwards can help a lot with usb.
lucid said:
Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?
Click to expand...
Click to collapse
hey
IIRC you have the beta hardSPL flashed, yes? I recommend updating it with this final one (only difference is this has overwrite protection while the beta did not - because of that, you can also update the beta one by using CustomRUU and the RUU_Signed.NBH from the final package after it extracts.)
as for voice, chances are a bit better I think.
congratulations Guys Congratulations Its The Only I Had To Say...
I Need Help....
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......
Many thanks...
dimisxxx said:
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......
Click to expand...
Click to collapse
yes it performs a hard reset.
don't despair, soon you can flash liberated rom and then you can forget about how to do manual liberation
Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?
tece said:
Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?
Click to expand...
Click to collapse
no, not using a kaiser ROM. but you can dump the ROM from Shift in the same way as Kaiser, I think pof also posted about this before. also we have some HTC rom updates, will try to upload them to crapidshare or something soon.
the current rom base with the GPS has an issue so we are porting the GPS to a newer rom base then release that.
as for rom editor tools, a kaiser kitchen with the rom base changed to a shift rom, will work. i.e. the rom tools from kaiser kitchen are compatible.
Shift display has gone blank
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.
Wow, good work!
Are there already any custom Shift ROMs out there..?
feyisetan said:
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.
Click to expand...
Click to collapse
try after removing battery, and with freshly booted vista and snapvue.
make sure the WMDC is running with USB enabled in it. that seems to help.
if nothing else helps, then when you get to that disabled message, and it doesn't move after maybe 2 minutes, Ctrl+C, etc., then hibernate vista etc. (as described above).
EDIT: ah I see you added: problem solved. what was the exact way to solve it?
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram
Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
saiweb said:
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram
Click to expand...
Click to collapse
i'm using the original rom i haven't changed it
deadnex said:
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
Click to expand...
Click to collapse
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards
Abu Shahad said:
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards
Click to expand...
Click to collapse
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way
deadnex said:
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way
Click to expand...
Click to collapse
thanks man worked perfectly
when i press modify it tells me thats theres an error and it closes
please help
Hi
i'm working on hd2 rom and after dump a schubert test rom.
i have notice this one contain a lots of usefull tools.
RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_TEST
This rom contain kitl tools allowing connection to remote tools framework
a part of Windows Embedded Compact 7 developper tool.(with registry editor and more)
sirep server allowing connection to.
also a tool to test all device sensor.
and a tool to see touchscreen raw data and more...
Maybe use this rom can help dev to find more.
you can also flash this rom with goldcard if your device is not unbranded.
i don't have HD7 Device so i can't help you with this.
Is the USB-Switch mode also included, because i'm stuck in Diagnostic Mode and it would be great...
Can i flash it with my European unbranded device?
Is there a Version-Controll?
because i have currently the 1.60 ROM installed...
thx.
Tried it but said not for my device... (after 1% flashed)
Oberoth said:
Is the USB-Switch mode also included, because i'm stuck in Diagnostic Mode and it would be great...
Can i flash it with my European unbranded device?
Is there a Version-Controll?
because i have currently the 1.60 ROM installed...
thx.
Tried it but said not for my device... (after 1% flashed)
Click to expand...
Click to collapse
i think you need to use goldcard to flash it.
damn...
i don't have goldcard, nor an y-cable to make one :'-(
chance for SSPL in near future?
downloading now , hope to get my goldcard working , last time it didn't work
i must wait till next week to build a Y-Cable
could you tell me if it works and if there is the USB-Switch-App in the ROM?
thanks
xboxmod said:
i think you need to use goldcard to flash it.
Click to expand...
Click to collapse
Hi,
You can not do it with GoldCard. First of all, you must have xxx.nbh file to use a GoldCard. ROM from first post does't have.
Regards
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Oberoth said:
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Click to expand...
Click to collapse
is that means.. now your phone has turn into ZUNE mode
back? Series? How? Do you mind to tech me on this?
I've download everything needed.. only need to build my own Y-Cable.
Appreciate your share.
Thanks~
No...
the needed app isn't in the main menu...
xboxmod (by the way... great thanks from me) and i are trying to open theese files because they are indeed in the rom....
Oberoth said:
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Click to expand...
Click to collapse
Oh, really. Check once again !!
xboxmod said:
Hi
i'm working on hd2 rom and after dump a schubert test rom.
i have notice this one contain a lots of usefull tools.
RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_TEST
This rom contain kitl tools allowing connection to remote tools framework
a part of Windows Embedded Compact 7 developper tool.(with registry editor and more)
sirep server allowing connection to.
also a tool to test all device sensor.
and a tool to see touchscreen raw data and more...
Maybe use this rom can help dev to find more.
you can also flash this rom with goldcard if your device is not unbranded.
i don't have HD7 Device so i can't help you with this.
Click to expand...
Click to collapse
At last... I've successful flash my devices using this ROM and Goldcard.
But to switch it back from DIAG to ZUNE, as you've said.. the USBtool.exe
has to be execute manually. I just wait maybe someone could found it how.
It's was really hard to find the single micro memorycard reader in my place.
I already try to use the multi/all in 1 mmc reader.. it wont work to
flash using goldcard technique because it seems like the phone keep searching
which one it should read from. so i manage to create my goldcard using flash
thumbdrive 4GB. and it works perfect with me. So now.. I have no worried to
flash any rom. except it was not develope for WP7. lol~
AzmanIshak said:
But to switch it back from DIAG to ZUNE, as you've said.. the USBtool.exe
has to be execute manually. I just wait maybe someone could found it how.
Click to expand...
Click to collapse
I'm talking to some developers to get enough information to get back into Zune Mode...
will make a thread when its done...
Oberoth said:
I'm talking to some developers to get enough information to get back into Zune Mode...
will make a thread when its done...
Click to expand...
Click to collapse
Wohooo.... serious nice. cant wait...
Please let me know when you've done.
thanks!
were you able to resolve this?
if it does not have the needed mode switcher app, can someone kindly create a custom rom with the needed app(usbmodeswitcher.xap)
Thanks
the problem is that we cannot flash that rom until we have HSPL or SSPL...
no chance to resolve the problem yet :-/
DF Router
can anyone build rom for HD7 with preinstaled "DF Router" app?
I changed usb mode to modem and I uninstalled this app, now i can connect to zune and install it again
am now in "modem mode" and i need back to "Zune mode"
more info about DF Router problem
answers.microsoft.com/en-us/winphone/forum/wp7-sync/any-solution-for-damaged-windows-phone-via-df/2109119d-0259-448a-9162-73ea1a7eed3a?tm=1308688395627
Hi.
The only way => back to repaire.
or try to flash it ....
now i have succesfull flashed this rom via goldcard.
but i still stuck in diag-mode, so i cant still connect via zune, is there already a solution for this problem??? =(
greetz nOoG
The good news first: We now have RSPL/HSPL (thanks to Cotulla and DFT)
The bad news: Nobody made a ROM which contains the USBSwitch-App :/
I hope that will change
Hi, I can't post directly into the existing thread (Noob), but I've tried Android Flasher 2.2.0.5 and it gives the old "Android Flasher has encountered a problem and needs to close" Microsoft warning. I'm happy to pay for the Pro version, but need to know it will run first.
I'm running WinXP SP3, and have a HTC Desire, rooted with Unrevoked 3. FYI, I could get Android AIO Flasher to start, and communicate with the phone, but it crashes when I try and convert pics to IMG. As I only want to change the splash screen, I thought AF would be the solution.
Anyone else hit this snag?
It'd be nice if I could just message the author
Thanks, Rod. ..... Nope, no quotes here.....
http://forum.xda-developers.com/showthread.php?t=405118
u could try this for changing splash screens. basicaly it converts bmp files to nb. and once its converted u just rename nb to .img and u can flash via fastboot commands.
http://androidforums.com/desire-all...under-rooting-android-errata.html#post2991455
thats a wee TUT on how to use it.
also u can use almost any free online image editor to convert jpg, png files etc etc to bmp format. this is just another way around changing splash screens
thanks handy5876 for this
Sent from my HTC Desire