Database Users

how to emulate a rom in a pc xp?

Hello, how i can emulate a rom in a pc xp computer?
tks

Hello, you can try MS Windows Mobile 6 Emulator. You will find it there : http://www.microsoft.com/downloads/...aa8-1dd7-426f-a913-4f370a65a582&DisplayLang=e

please let us know if in meantime you have some success.
I've been trying to to do the same but unfortunately without any luck.

ribasnet said:
please let us know if in meantime you have some success.
I've been trying to to do the same but unfortunately without any luck.
Click to expand...
Click to collapse
I'll keep you guys updated if it works with other roms or not.
I always wanted something like this, This is my change

The problem I have is I have no idea where the ROM or files are stored themelves. You can't "Flash A ROM" to the emulator (or at least i haven't figured out a way) as it won't connect to AS, and the emulator has no bootloader emulation.

This would be absolutely great for ROM cookers! Hope there would be a solution in the future!!!!

ElProempie said:
I'll keep you guys updated if it works with other roms or not.
I always wanted something like this, This is my change
Click to expand...
Click to collapse
I cant get the program to install.. Must be my pc. Time for a clean-up
Sorry guys. If i find something else, ill let you know.

i can connect flawlessly with Vista and XP both toactivesync and WMDC..but you cant emulate a ROM image becase it uese a .bin file extension for its rom..go into emulator config and you will notice
i guess we can enter the bootloader mode via mitty ... why didnt i think of this before

I believe you can dump a ROM to a *.bin file, so couldn't that be used for the ROM image? I can't get it to connect to activesync :S

yes i can dump the rom sucessfully also..but cant disassemble it as i cant find the correct offset code..tried all using dump.exe

Shift Project Release: SSPL and HardSPL - the way to custom ROMs and more!

so here we proudly present the HardSPL flash package
well, what this is good for - this enables flashing of custom roms (I try to explain only because I know many Shift owners here don't own other HTC devices).
SSPL and RUU patches have been made mostly by me, HSPL and package compilation have been made mostly by Olipro, so both are branded OliNex.
Please read and follow all instructions very carefully.
this has been tested (thanks thaihugo, et al.), but if you have problems then do let us know in this thread.
also, TO EVERYONE WHO BETA TESTED in the past: please do download this final version. it will flash an updated HardSPL to your device.
prerequisite: "liberated" Shift (i.e. has the usbtool on Snapvue side!).
[size=+1]STEP BY STEP INSTRUCTIONS:[/size]
1. Download the package from attachment in this post and extract the files from the zip somewhere on Vista.
2. Install the EnableRapi.cab file from the zip on Snapvue side. (of course do unzip in Vista first.)
3. Make sure Shift is on AC adapter and that the WMDC in Vista sees the Snapvue side!!! (use usbtool to turn USB on in Snapvue if necessary.)
4. Run the ShiftHardSPLFinal.exe on Vista. if you do not have UAC disabled, then please run it as Administrator!!!
5. It should pop up two cmd windows for a second. then it will pop up a box saying "Processing". at this point please check if Snapvue side went into black screen. if yes, then everything is OK so far, so press OK in the "Processing" messagebox.
6. After some more wait (and two more cmd windows - please allow them to run if Vista asks!), the Romupdateutility will launch automatically. Please press Next and so on, until it flashes the update.
7. The RUU should say success, and should hard reset the device. at this point your Shift has been HardSPL'ed - Congratulations!!!
TroubleShooting:
- if Vista errors out on pput.exe after step 4, make sure you launched the ShiftHardSPLFinal.exe as Administrator: right click on EXE and select "run as Administrator" option.
- if at step 5, you don't have black screen, the device might be asking you to allow to run a program on the Snapvue side. click Yes if prompted!
- if after step 5 the next cmd gets stuck at some USB disabling message, let us know. (it shouldn't get stuck but just in case.)
- if you wish to check it is really HardSPL'd now, use mtty and use info 2 command in it. it should return HTCS00000000something which means it is (fake) supercid and is HardSPL.
NOTE: never use the RUU from this SSPL package for anything else! this is special and is strictly for the HardSPL process.
to just flash ROMs after you installed HardSPL, you can use the original RUU or CustomRUU from this thread: http://forum.xda-developers.com/showthread.php?p=2098895#post2098895
also, first Custom ROM with GPS and with some tweaks/customizations (will also be liberated out of the box!) is to follow sometime this week. along with a radio Security/CID unlocker (patched radio image). then voice and maybe WVGA screen is to follow not much later.
you of course must have this HardSPL installed, or the ROMs will not flash!
enjoy

Let me be the first to say on behalf of us here:
THANK YOU!!!!!!!!!!!!!!!!
ALL HAIL CMONEX!!!!!!!!!!!!!!!!!!

Thanks you and all others in Shift Project

Wouhou !
Thanks !!! great news

I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?

Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?

Thanks Guys, appreciated!

after done this thing, is it possible to make voice call from Shift? sorry about that question, as I dont have much knowleague about rom and flash

noup. this will allow you to place the hacked rom (the hacked rom is still to be released) that would enable these features... and this without having the phone detect the "hack".
this is a way of telling it..

szjohnwong said:
I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?
Click to expand...
Click to collapse
oh, chinese shift... is the OS in all chinese? and the WM side?
anyway, that should not be a problem... if it still won't go on, press Ctrl+C to cancel this cmd, another will pop up, cancel that too, then the RUU will pop up. at this point, put vista to hibernate (don't try to shut down for now, it will make it harder to get it working that way). wait a few secs after it hibernated, wake up vista, then go on with the RUU.
btw if this is first time being in bootloader, it might first want to install drivers at this point. let it install them, then feel free to continue in the RUU.
another way to deal with the issue: shut down vista and remove battery. reinstall battery, boot both vista and snapvue, then start the process from step 1 again. battery removal and fresh boot of vista afterwards can help a lot with usb.

lucid said:
Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?
Click to expand...
Click to collapse
hey
IIRC you have the beta hardSPL flashed, yes? I recommend updating it with this final one (only difference is this has overwrite protection while the beta did not - because of that, you can also update the beta one by using CustomRUU and the RUU_Signed.NBH from the final package after it extracts.)
as for voice, chances are a bit better I think.

congratulations Guys Congratulations Its The Only I Had To Say...​

I Need Help....
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......

Many thanks...

dimisxxx said:
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......
Click to expand...
Click to collapse
yes it performs a hard reset.
don't despair, soon you can flash liberated rom and then you can forget about how to do manual liberation

Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?

tece said:
Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?
Click to expand...
Click to collapse
no, not using a kaiser ROM. but you can dump the ROM from Shift in the same way as Kaiser, I think pof also posted about this before. also we have some HTC rom updates, will try to upload them to crapidshare or something soon.
the current rom base with the GPS has an issue so we are porting the GPS to a newer rom base then release that.
as for rom editor tools, a kaiser kitchen with the rom base changed to a shift rom, will work. i.e. the rom tools from kaiser kitchen are compatible.

Shift display has gone blank
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.

Wow, good work!
Are there already any custom Shift ROMs out there..?

feyisetan said:
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.
Click to expand...
Click to collapse
try after removing battery, and with freshly booted vista and snapvue.
make sure the WMDC is running with USB enabled in it. that seems to help.
if nothing else helps, then when you get to that disabled message, and it doesn't move after maybe 2 minutes, Ctrl+C, etc., then hibernate vista etc. (as described above).
EDIT: ah I see you added: problem solved. what was the exact way to solve it?

ROM for hw6945 vG.39

Hi guys, so, I bricked my device, I was try update my ROM and my device was dead, I tried update with hw6915's rom but nothing worked, I need this ROM please, someone could help me?

Hi, this is dumped OS ROM 1.48NA from hw6945. ONLY FOR hw6945 !!!
Code:
[url]http://rapidshare.com/files/152256884/aWizard_hw6945.zip.html[/url]
This tools is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this flashing procedure.

Hey spg, It is doen't work because my device is bricked, it is showing only the screen with HP logo with USB (when I put it in my PC) on top and vG.39 on footer. Could you help me? Ah I forgot one thing... my device is CID Lock.

http://rapidshare.com/files/46350136/Ipaq_HW69XX_ENG_ROM.rar.html
from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend. Not work? Sorry for bad english.

Thanks bro, I'll to try when I arrive in my home!

hey brooo... Didn't nothing with name Sable_RUU in the folder that you send to me...

spgi said:
Hi, this is dumped OS ROM 1.48NA from hw6945
Code:
[url]http://rapidshare.com/files/152256884/aWizard_hw6945.zip.html[/url]
This tools is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this flashing procedure.
Click to expand...
Click to collapse
Hi Spgi,
I followed the instruction and got a error while write the hp6945-os.nba, now my phone halt on HP logo with 1.00.00 and 1.48NA at the lower right corner screen. How to do know? can you help?

Except that another can not help:
http://forum.xda-developers.com/showpost.php?p=2787865&postcount=5
Sorry

spgi said:
Except that another can not help:
http://forum.xda-developers.com/showpost.php?p=2787865&postcount=5
Sorry
Click to expand...
Click to collapse
Hi Spgi, successful recover my 6965 to 1.21UK ver now, but I am interesting in OS ROM 1.48NA from hw6945, I tried twice of your dump by aWizard, failed twice, is there any way to dump or conver the HP6945-os.nba to NBF format? Could you pls upload a NBF format ROM?
Oh, by the way, I used to dump my phone by grab_it, do you know how to write the dumped bin file back to phone? thank a lot, bro!

Hi Spgi, would you pls reply me? tks!

3circles said:
Hi Spgi, would you pls reply me? tks!
Click to expand...
Click to collapse
Hi, transformation is impossible.

so can anyone help me with a working ROM on 6945?

Man,I read ur thread what u memtioned use MTTY to change the device ID,u r great!
But actually I tried to use MTTY to make my HP6915 device to be upgraded again,apparently I failed. No! exactly was my device failed when the flash tool working. My device just lost GSM at the beginning,then I tried to fix it by flashing,but seems the USB port of device be block,the flash tool always notice :" Error:201" when upgrading
Do u have any idea to help me out of this problem?
spgi said:
http://rapidshare.com/files/46350136/Ipaq_HW69XX_ENG_ROM.rar.html
from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend. Not work? Sorry for bad english.
Click to expand...
Click to collapse

bramblyrose said:
Man,I read ur thread what u memtioned use MTTY to change the device ID,u r great!
But actually I tried to use MTTY to make my HP6915 device to be upgraded again,apparently I failed. No! exactly was my device failed when the flash tool working. My device just lost GSM at the beginning,then I tried to fix it by flashing,but seems the USB port of device be block,the flash tool always notice :" Error:201" when upgrading
Do u have any idea to help me out of this problem?
Click to expand...
Click to collapse
Hi,
1. Get the latest ROM for your device from HP !!
2. Create a flash.dio file with these instructions
3. Put that flash.dio on a SD card (!!!! NOT SDHC !!!!)
4. Put the SD card in your device.
5. Press action-action + reset to enter Bootloader mode according to instructions here
6. Wait end of flash
7. Clean Boot
Dirk

The latest ROM I got just the 1.21 EN version for HP6915 G4,I did extract the file but I never seen "FLASH.NBF" whatever,that make me confused,u know.
dirlan2001 said:
Hi,
1. Get the latest ROM for your device from HP !!
2. Create a flash.dio file with these instructions
3. Put that flash.dio on a SD card (!!!! NOT SDHC !!!!)
4. Put the SD card in your device.
5. Press action-action + reset to enter Bootloader mode according to instructions here
6. Wait end of flash
7. Clean Boot
Dirk
Click to expand...
Click to collapse

Been a long time since these posts...
There's a workaround for your HP iPAQ hw6945 SERIAL/USB v.G 39 screen problem:
Disable ActiveSync, and install the GSM Radio Stack Firmware Upgrade sp35602 again, that was never mentioned in the instructions, but it sure worked, and my 6945 is now back among the living

spgi said:
http://rapidshare.com/files/46350136/Ipaq_HW69XX_ENG_ROM.rar.html
from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend. Not work? Sorry for bad english.
Click to expand...
Click to collapse
now it is no useful.

Please Help!
I've been looking all over the internet for the english ROM for my ipaq hw6945 with no success. The WM in my ipaq is in spanish and all the updates for it are in english so none of the updates will install (they dont pass the validation). Is there a workarround for this? Or do you guys have a ROM in english for my device? Much appreciated!

[TUT] HP 91x ROM update (fix bricked ipaq and change from any language to english)

Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal

Good job, thanks!
Will try it out later!

is it still compatible even though my device SKU IDs is not compatible with the update?
Last time i tried i almost bricked my device.

In theory, yes
Actually, like I wrote above.
My ipaq 914c is Italian version.
It means that the SKU IDs of the phone is not not compatible with the update. ( I mean the official update!)
But we all know that there is no difference in the hardware between the ipaq 91x.
So any language ROM versions can be used on the another ipaq 91x phone.
=> WWE ROM can be used on any Ipaq 91x phone.
My Ipaq now is in English. But the SKU IDs still show that it's in Italian.
By the way, I forget to thank: Z!L0G80.

i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx

AbsolutBenz said:
i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx
Click to expand...
Click to collapse
Hi,
As it was given like that, I think you should check the usb cable. Sometimes the cable is not working well. I use the original cable, because the last time I use another there was an error when it was flashing. (I'm not sure if the active syn is necessary. In my case, I have the active syn on my laptop. XP enviroment.)
If you want to try the SDBootloader you can find in this forums some instructions about cutting some bytes to obtain the flashdio.nb0
But I really don't recommend that way. Because the last time when I find the way to change the language by flashing the english Rom following those instruction. My phone was bricked. So I tried to find another way.
And this is it.
I think this method is the safest way for newbie. As I wrote above. The first time I bricked my phone. But I did the same procedure again. And it worked.
Just check the procedure again.
Good luck,

For the SDloader update (Which works very very well on my German 914c):
download the file below (I already cut the first 3432 bytes from it), put it on a newly formatted SD-card (not SDHC!) and hold down volumeup+OK button (the one on the right side) while pushing the reset button, hold the mentioned sidebuttons until you see SDloader. Then wait for a few minutes, and the update will finish!
If the updater does not find the file, you have to re-format the SD-card to either FAT or FAT32!
Rename the file to FLASH.DIO when you copy it onto the SD-card!
http://rapidshare.com/files/236053650/FLASH.DIO.html

vragon said:
Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal
Click to expand...
Click to collapse
Hi Everybody,
@vdragon
1- what a great job, guy!
2- in reality, i have already flashed your ROM successfully for my ipaq 914c, which is a native italian version. Since the incompatibilites of different versions were resolved perfectly.
3-Grazie tanto di nuovo

I'm pretty new with this and I've been trying to update my 910 with original ROM but for some reason it gets stuck and the only way to bring it back is with a SDLoader I downloaded from here but that one is very simple and I'd like one with all the programs.
Is there a way to load yours on it through the SD card?

you can follow the instruction to cut the 3432 bytes and flash your phone with SD card.
I see that many people prefer to use the sdloader method than this one.
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.

vragon said:
...
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.
Click to expand...
Click to collapse
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?

congtiger said:
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?
Click to expand...
Click to collapse
sure

congtiger said:
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
Yes it is true!
Using vragon's patched Updater the following is updated:
OS (=ROM)
Bootloader
Pre-Bootloader
Radio&Modem
This update takes about 20minutes, so be patient, do not remove any cables during update!
The flashing of FLASH.DIO with an SD-card "only" updates the OS (=ROM) and is done within less than 10minutes.
Thanks vrago for patching the Romupdate.dll!

You can also see it in the bootsplash screen. Before the update (even after SDloader updates) it always showed FW 1.04.
Now it is 1.09 - and yeah, it works GREAT and quick!
I can recommend it!! (I do not take responsibility though)
Should be a sticky!!

I've been trying this file, and I get an error at 51% of update. Any ideas?

I think it's about your cable. Be sure that you use the original cable with the anti-noise hub.
If you didn't success the first time. Try it again.
Do as you did the first time.
And just be patient. Don't move anything.
The first time I used this method, at the middle of flashing, I kicked my cable and it just stopped. And I did it again carefully.
So that's it

Actually, I think I figured it out. It seems that Vista treats USB partnerships differently than XP, so after a certain amount of time, it "refreshes" the relationship with the USB device. If you are trying to flash your phone, that stops the flash/update.
I just used my XP system, and it worked fine. After a few registry tweaks for ring volume and battery life, it's working fine.
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
I'm positive the SD Loader method isn't as thorough as this method. This method takes 20 minutes or so, and you can see that it's updating the pre-loader, modem/radio, etc. The SD method only updates software.

Problem using HP 614c from original ITA rom
I am a stupd guy
I am a stupd guy
I am a stupd guy
Hy vragon, i have used your method to upgrade my device 614c (and not 914) from an original Italian ROM. All process is ended correctly, all upgrade are finished without errors.
The update utility has made the update of that:
Software - From Version - To Version
Bootloader - 1.00.07 - 1.01.01
Windows Mobile 6.1 Professional - 1.00.07 - 1.01.01
Pre-Bootloader - 1.00.07 - 1.01.01
iPAQ WAN Radio Firmware - 0.81.00 - 1.09.00
But after the upgrade, at the end the display was black(not really black i can see the leds of the entire display are ON but das not appear nothing), and after some minutes abouth 20, i removed the battery and restart the device but nothing has changed. The led over the screen and the sound working.
I have try also to do a hard reset with a flash.dio on an SD card inserted to replace the Rom, but dose not work!
The device after that will work properly, and das not appear to have any problem.
CAN SOMWONE HELP ME !!!

@ilconte81:
just go to hp site.
find a ROM update for 614c.
download it.
using winrar to extract everything in the exe file.
copy the ROMupdate.dll from my file to replace the file in the folder which is extracted from exe file.
run the rom update again.

Tanks for reply vragon,
i have tryed to do what you wrote, but the device will not be right recognized from the OS (will appear USB device not recognized) and the update utlity after a long time in "Plese wait while the device state is verified" give the comunication error Code 402, Cannot comunicate with device.
I use the original cable and try these on different OS like Win XP and Win 7.

[Q] Update windows7 7592 to latest rom on HD2?

Hello people!
I've been working with windows 7 7592 on my HTC HD2 for some time now and i really want to keep windows 7. I can't seem to find a way to update from 7592 to 7720, does anyone know of any ?
Leo

you'll have to download first the wanted update cab from xbosmod/sylvester's page and send it to your phone with the help of update cab sender from the same guys

Hey, thanx for the quick reply florin_stann!
I tried googleling xbosmod/sylvester but i found nothing, can you be more specific on were i should go to download the rom?

which ROM you have? author (which cooker not version)
only Yuki ROM can update with CAB files.... for other ROM's you must flashing from beginning

Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?

Lewnidas said:
Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?
Click to expand...
Click to collapse
no... but is possible this is Yuki BTTF ROM?

Can't say for sure m8.. any way you know i can find out?

Any way to figure out who cooked my rom?
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo

Lewnidas said:
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo
Click to expand...
Click to collapse
did you can send CAB files to phone? if you can, this is Yuki (BTTF) ROM.... but maybe is better to try change to other ROM.... only one warning... if your ROM is Yuki, then your sdcard is locked... you must first unlock it with sending unlock CAB file to phone and then format it before install new ROM....
i recommended this ROM
http://forum.xda-developers.com/showthread.php?t=1356833

I could send cab files through a Microsoft developer tool, and my sdcard is not locked.
I will try the rom you recommended, thatk you for the reply dxdy!
Will let you know if i come up with results.
Leo

Why is everything so complicated!!
Ok my friend, i allready have Magldr v1.13 and windows 7592.
On your tutorial you write:
- when you turn on phone press and hold power button to boot direct to MAGLDR:
* go to 5. USB Flasher and run ENG_DWI.exe to flash ROM (or TR_DWI.exe. ENG is installer in English, TR is Turkish)
- after flashing process done, and when show Main screen with Tiles, do hard reset (Settings - About - reset my phone)
- you are done... ignore next steps
Got two questions on that.
I downloaded 3_HD2_Pdaimatejam_Rom_Wp7.5_mango_7.10.8107.79_v7.3.rar but there's no ENG_DWI.exe in the file..
How does it install windows 7 8107 just by hard resetting ?
I feel like a pain in the neck, sorry for that, if things get more complicated i'll try to find another way or just stay with 7592.

I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..

Lewnidas said:
I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..
Click to expand...
Click to collapse
one time file is named ENG_DWI.exe.... totally not important how is named, DWI.exe or ENG_DWI.exe.. is same file..
did in USB mode in MAGLDR recognize USB?

Dxdy!!
It worked! Running on windows 7 8107!
Thank you for your tips, be well
Leo

Dude.. I've had this phone for what.. 3 years now?
It still feels new!
Everything works.. marketplace works, speech works, everything.
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!

Lewnidas said:
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22260479&postcount=2185