Database Users

help me in pw10a1

dear all friends
i have qtek pw10a1 it hange in blue screen qtek ise under screen
g32s54
a3.25.01
3.18.04
and wheni press power and rest isee wallby boot loader v5.22
gsm ok
so how can islove this problem and please tell me how can i do hard rest .
and can i upgrade it with 3.20.06_ENG.exe if yes please tell me steps .
first tell me how can i do hard rest.

where is help iam waiting .
please how can i do hard rest

Hard Reset can be done by unscrewing your pen and sticking twice in the little hole near the earphone connector. But entering bootloader (power button and soft reset) ha teh same effect.
You can not use the exe file for flashing directly, because flashing via exe file requires a ActiveSync connection between PC an Phone...
For flashing read this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
where is help iam waiting .
Click to expand...
Click to collapse
There are just a few hours between your postings. This is not a chat and all useres here are doing their job as good as they can and without getting money for it. So be thankful that you get any help here....
Stefan

thanks for your replay and iam sorry for two post which i wrote i do as you tell me now iwant to flash it but i dont know how can i put it in flash mode i put it in gsm ok but computer cannot see it do inedd any driver so please replay soon

his link describe how you put a rom on a sd card which automaticly
update the device when it's in bootloader mode (the thing you call gsm ok mode)

friend when i put it in gsm ok my computer cant see itit see )unkwon so how can i put it in flash mode please help me in his link there is no way to put it in flash mode

If the file is writtten in correct format on the SD Card and you enter the bootloader with the insert SD-Card, it will go automaticly in Flashmode.
If that happend not on your device, the ROM is not written correctly on the SD Card.
Stefan

at no point in the linked page do your phone have to be detected or comm in any way with the computer

when i press copy it saye please connect your xda to active syinc
how can i connect it to active syice and its hange in qtek. my pc cannot see it

please if any one can tell me how can i do Hard Reset becuase i dont understand (Hard Reset can be done by unscrewing your pen and sticking twice in the little hole near the earphone connector) i think its soft rest and i want hard rest

there is two hole near ear phone connectre do you want me topress it in the same time for secondes i pressed it but same problem

The way to do a hard reset is to remove the power of the battery. This is done by the small hole on the side of the earphone connector, marked with a battery sign.
But this will not help you. You require a SD-Card and an SD-Card writer to flash a new ROM on your device. All have already said on the first postings.
Stefan

friend tell me how can i copy rom update to sd card with boot

Already done. See the link to wiki.....
Stefan

it aske me for nbi files and i dont have it so from where i can download it .
itry rest+power button then i go to flash tools and i select ce os+boot to sd and i copy it completed then i do rest i go to sd download and i download it but same problem .
so from where i can nb1 files

You can use either nb1 or nbf files. You can extract tgat file from any existing ROM in EXE-Format (using winzip) or download the nbf format from the Romkitchen for example....
Stefan

LumpiStefan thanks 10000 you are agood friend phone now back to live thanks
for all your help .
please where can i found ararbic rom thanks

You´re welcome....
As much as ii know there is no Arabic ROM available. Just english, french, spanish, iatlian, german and one chinese version.....
If you take a look at the wiki page, there can you find all available ROMs that are known to me....
Stefan

Artemis: USB-Connection not working - Up-/Downgrade by SD-Card not possible

Hi there,
I have a MDA Compact III from T-Mobile, but I upgraded it to WM6 from o2 in former times.
Now the USB-Connection is broken (don´t ask me why - I don´t know) and I want to send the Artemis to my provider for repairing or changing (btw loading is working by USB, but Windows Vista, XP etc. wont identified the Artemis - tested on serveral PCs).
Because of the guarantee I have first to downgrade the o2-OS to the original T-Mobile-OS. I´ve tried it by SD-Card, but I doesn´t work.
The bootloader shows IPL 3.04.0001 and SPL 3.04.0000. As I understand it, I have to use first Artemis_USPL, but without a working USB-Connection it wont work.
Can someone help me?
Many thanks in advance.

I have still the same problem. Any ideas yet?

Just an idea.but have you tried to activesync your device thru bluetooth and installing the Artemis uspl and then flashing your rom via SD card?
Edit .
Sorry mate, tested it on my Artemis and doesn't work.

I'm having the same problem here.
When i connect it to my pc it starts charging but there is no connection with the pc
Someone knows a fix?

sammis said:
Just an idea.but have you tried to activesync your device thru bluetooth and installing the Artemis uspl and then flashing your rom via SD card?
Edit .
Sorry mate, tested it on my Artemis and doesn't work.
Click to expand...
Click to collapse
Thanx for Testing...

By the way ,did you try to activesync thru bluetooth?

Yes mate. The Artemis was connected but didn´t synchronize.

And bluetooth can't be used to flash

RikP said:
And bluetooth can't be used to flash
Click to expand...
Click to collapse
No,it can't ,but,what i had in mind was this:
What if you extracted the ruu-signed.nbh from the USPL app renamed it to arteimg.nbh and put it in the root of your sd card which you then put in your Artemis.
Now create a bluetooth activesync connection with your PC "It's a ***** but it can be done" ,run the USPL app and once it reaches the point where the Dos window "Black screen" exits you manually enter bootloader and run the arteimg.nbh.
Do you think it might work?
Edit:
If this works then you will have a CID unlocked Artemis and you'll be able to flash any rom thru the SD card.

With "ruu-signed.nbh" you mean an original t-mobile-rom?

rumms said:
With "ruu-signed.nbh" you mean an original t-mobile-rom?
Click to expand...
Click to collapse
No, i mean the one that is inside the USPL app released by Pof.

sammis said:
No,it can't ,but,what i had in mind was this:
Do you think it might work?
Click to expand...
Click to collapse
Doesn´t work.

[TUT] HP 91x ROM update (fix bricked ipaq and change from any language to english)

Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal

Good job, thanks!
Will try it out later!

is it still compatible even though my device SKU IDs is not compatible with the update?
Last time i tried i almost bricked my device.

In theory, yes
Actually, like I wrote above.
My ipaq 914c is Italian version.
It means that the SKU IDs of the phone is not not compatible with the update. ( I mean the official update!)
But we all know that there is no difference in the hardware between the ipaq 91x.
So any language ROM versions can be used on the another ipaq 91x phone.
=> WWE ROM can be used on any Ipaq 91x phone.
My Ipaq now is in English. But the SKU IDs still show that it's in Italian.
By the way, I forget to thank: Z!L0G80.

i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx

AbsolutBenz said:
i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx
Click to expand...
Click to collapse
Hi,
As it was given like that, I think you should check the usb cable. Sometimes the cable is not working well. I use the original cable, because the last time I use another there was an error when it was flashing. (I'm not sure if the active syn is necessary. In my case, I have the active syn on my laptop. XP enviroment.)
If you want to try the SDBootloader you can find in this forums some instructions about cutting some bytes to obtain the flashdio.nb0
But I really don't recommend that way. Because the last time when I find the way to change the language by flashing the english Rom following those instruction. My phone was bricked. So I tried to find another way.
And this is it.
I think this method is the safest way for newbie. As I wrote above. The first time I bricked my phone. But I did the same procedure again. And it worked.
Just check the procedure again.
Good luck,

For the SDloader update (Which works very very well on my German 914c):
download the file below (I already cut the first 3432 bytes from it), put it on a newly formatted SD-card (not SDHC!) and hold down volumeup+OK button (the one on the right side) while pushing the reset button, hold the mentioned sidebuttons until you see SDloader. Then wait for a few minutes, and the update will finish!
If the updater does not find the file, you have to re-format the SD-card to either FAT or FAT32!
Rename the file to FLASH.DIO when you copy it onto the SD-card!
http://rapidshare.com/files/236053650/FLASH.DIO.html

vragon said:
Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal
Click to expand...
Click to collapse
Hi Everybody,
@vdragon
1- what a great job, guy!
2- in reality, i have already flashed your ROM successfully for my ipaq 914c, which is a native italian version. Since the incompatibilites of different versions were resolved perfectly.
3-Grazie tanto di nuovo

I'm pretty new with this and I've been trying to update my 910 with original ROM but for some reason it gets stuck and the only way to bring it back is with a SDLoader I downloaded from here but that one is very simple and I'd like one with all the programs.
Is there a way to load yours on it through the SD card?

you can follow the instruction to cut the 3432 bytes and flash your phone with SD card.
I see that many people prefer to use the sdloader method than this one.
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.

vragon said:
...
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.
Click to expand...
Click to collapse
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?

congtiger said:
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?
Click to expand...
Click to collapse
sure

congtiger said:
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
Yes it is true!
Using vragon's patched Updater the following is updated:
OS (=ROM)
Bootloader
Pre-Bootloader
Radio&Modem
This update takes about 20minutes, so be patient, do not remove any cables during update!
The flashing of FLASH.DIO with an SD-card "only" updates the OS (=ROM) and is done within less than 10minutes.
Thanks vrago for patching the Romupdate.dll!

You can also see it in the bootsplash screen. Before the update (even after SDloader updates) it always showed FW 1.04.
Now it is 1.09 - and yeah, it works GREAT and quick!
I can recommend it!! (I do not take responsibility though)
Should be a sticky!!

I've been trying this file, and I get an error at 51% of update. Any ideas?

I think it's about your cable. Be sure that you use the original cable with the anti-noise hub.
If you didn't success the first time. Try it again.
Do as you did the first time.
And just be patient. Don't move anything.
The first time I used this method, at the middle of flashing, I kicked my cable and it just stopped. And I did it again carefully.
So that's it

Actually, I think I figured it out. It seems that Vista treats USB partnerships differently than XP, so after a certain amount of time, it "refreshes" the relationship with the USB device. If you are trying to flash your phone, that stops the flash/update.
I just used my XP system, and it worked fine. After a few registry tweaks for ring volume and battery life, it's working fine.
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
I'm positive the SD Loader method isn't as thorough as this method. This method takes 20 minutes or so, and you can see that it's updating the pre-loader, modem/radio, etc. The SD method only updates software.

Problem using HP 614c from original ITA rom
I am a stupd guy
I am a stupd guy
I am a stupd guy
Hy vragon, i have used your method to upgrade my device 614c (and not 914) from an original Italian ROM. All process is ended correctly, all upgrade are finished without errors.
The update utility has made the update of that:
Software - From Version - To Version
Bootloader - 1.00.07 - 1.01.01
Windows Mobile 6.1 Professional - 1.00.07 - 1.01.01
Pre-Bootloader - 1.00.07 - 1.01.01
iPAQ WAN Radio Firmware - 0.81.00 - 1.09.00
But after the upgrade, at the end the display was black(not really black i can see the leds of the entire display are ON but das not appear nothing), and after some minutes abouth 20, i removed the battery and restart the device but nothing has changed. The led over the screen and the sound working.
I have try also to do a hard reset with a flash.dio on an SD card inserted to replace the Rom, but dose not work!
The device after that will work properly, and das not appear to have any problem.
CAN SOMWONE HELP ME !!!

@ilconte81:
just go to hp site.
find a ROM update for 614c.
download it.
using winrar to extract everything in the exe file.
copy the ROMupdate.dll from my file to replace the file in the folder which is extracted from exe file.
run the rom update again.

Tanks for reply vragon,
i have tryed to do what you wrote, but the device will not be right recognized from the OS (will appear USB device not recognized) and the update utlity after a long time in "Plese wait while the device state is verified" give the comunication error Code 402, Cannot comunicate with device.
I use the original cable and try these on different OS like Win XP and Win 7.

how do I flash a bin (ROM) file to a SPV C500 using MTTY

hi guys I want to flash my SPV C500 to windows mobile 6.5 I have found this thread http://forum.xda-developers.com/showthread.php?t=374893 but it uses MTTY and bin files and I have never used this program before I wounded if anyone can help me and I havent got a memory card for the phone do I need one? thanks for your help from David Heath

HeathHayle said:
hi guys I want to flash my SPV C500 to windows mobile 6.5 I have found this thread http://forum.xda-developers.com/showthread.php?t=374893 but it uses MTTY and bin files and I have never used this program before I wounded if anyone can help me and I havent got a memory card for the phone do I need one? thanks for your help from David Heath
Click to expand...
Click to collapse
you mean how to flash ROM via SDCart ???

There is no other way to update the phone except using the supplied BIN files. You cannot use these files for any other method than MTTY "l" (load) command. You do not need a memory card for the update.

hello
how exactly i do this? how do i flash/install this rom or whatever ti is?

Please read the relevant threads that advertise the ROM to load. They describe the whole process, including the use of the MTTY program.

[ROM] For developer only

Hi
i'm working on hd2 rom and after dump a schubert test rom.
i have notice this one contain a lots of usefull tools.
RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_TEST
This rom contain kitl tools allowing connection to remote tools framework
a part of Windows Embedded Compact 7 developper tool.(with registry editor and more)
sirep server allowing connection to.
also a tool to test all device sensor.
and a tool to see touchscreen raw data and more...
Maybe use this rom can help dev to find more.
you can also flash this rom with goldcard if your device is not unbranded.
i don't have HD7 Device so i can't help you with this.

Is the USB-Switch mode also included, because i'm stuck in Diagnostic Mode and it would be great...
Can i flash it with my European unbranded device?
Is there a Version-Controll?
because i have currently the 1.60 ROM installed...
thx.
Tried it but said not for my device... (after 1% flashed)

Oberoth said:
Is the USB-Switch mode also included, because i'm stuck in Diagnostic Mode and it would be great...
Can i flash it with my European unbranded device?
Is there a Version-Controll?
because i have currently the 1.60 ROM installed...
thx.
Tried it but said not for my device... (after 1% flashed)
Click to expand...
Click to collapse
i think you need to use goldcard to flash it.

damn...
i don't have goldcard, nor an y-cable to make one :'-(
chance for SSPL in near future?

downloading now , hope to get my goldcard working , last time it didn't work

i must wait till next week to build a Y-Cable
could you tell me if it works and if there is the USB-Switch-App in the ROM?
thanks

xboxmod said:
i think you need to use goldcard to flash it.
Click to expand...
Click to collapse
Hi,
You can not do it with GoldCard. First of all, you must have xxx.nbh file to use a GoldCard. ROM from first post does't have.
Regards

it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...

Oberoth said:
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Click to expand...
Click to collapse
is that means.. now your phone has turn into ZUNE mode
back? Series? How? Do you mind to tech me on this?
I've download everything needed.. only need to build my own Y-Cable.
Appreciate your share.
Thanks~

No...
the needed app isn't in the main menu...
xboxmod (by the way... great thanks from me) and i are trying to open theese files because they are indeed in the rom....

Oberoth said:
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Click to expand...
Click to collapse
Oh, really. Check once again !!

xboxmod said:
Hi
i'm working on hd2 rom and after dump a schubert test rom.
i have notice this one contain a lots of usefull tools.
RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_TEST
This rom contain kitl tools allowing connection to remote tools framework
a part of Windows Embedded Compact 7 developper tool.(with registry editor and more)
sirep server allowing connection to.
also a tool to test all device sensor.
and a tool to see touchscreen raw data and more...
Maybe use this rom can help dev to find more.
you can also flash this rom with goldcard if your device is not unbranded.
i don't have HD7 Device so i can't help you with this.
Click to expand...
Click to collapse
At last... I've successful flash my devices using this ROM and Goldcard.
But to switch it back from DIAG to ZUNE, as you've said.. the USBtool.exe
has to be execute manually. I just wait maybe someone could found it how.
It's was really hard to find the single micro memorycard reader in my place.
I already try to use the multi/all in 1 mmc reader.. it wont work to
flash using goldcard technique because it seems like the phone keep searching
which one it should read from. so i manage to create my goldcard using flash
thumbdrive 4GB. and it works perfect with me. So now.. I have no worried to
flash any rom. except it was not develope for WP7. lol~

AzmanIshak said:
But to switch it back from DIAG to ZUNE, as you've said.. the USBtool.exe
has to be execute manually. I just wait maybe someone could found it how.
Click to expand...
Click to collapse
I'm talking to some developers to get enough information to get back into Zune Mode...
will make a thread when its done...

Oberoth said:
I'm talking to some developers to get enough information to get back into Zune Mode...
will make a thread when its done...
Click to expand...
Click to collapse
Wohooo.... serious nice. cant wait...
Please let me know when you've done.
thanks!

were you able to resolve this?
if it does not have the needed mode switcher app, can someone kindly create a custom rom with the needed app(usbmodeswitcher.xap)
Thanks

the problem is that we cannot flash that rom until we have HSPL or SSPL...
no chance to resolve the problem yet :-/

DF Router
can anyone build rom for HD7 with preinstaled "DF Router" app?
I changed usb mode to modem and I uninstalled this app, now i can connect to zune and install it again
am now in "modem mode" and i need back to "Zune mode"
more info about DF Router problem
answers.microsoft.com/en-us/winphone/forum/wp7-sync/any-solution-for-damaged-windows-phone-via-df/2109119d-0259-448a-9162-73ea1a7eed3a?tm=1308688395627

Hi.
The only way => back to repaire.
or try to flash it ....

now i have succesfull flashed this rom via goldcard.
but i still stuck in diag-mode, so i cant still connect via zune, is there already a solution for this problem??? =(
greetz nOoG

The good news first: We now have RSPL/HSPL (thanks to Cotulla and DFT)
The bad news: Nobody made a ROM which contains the USBSwitch-App :/
I hope that will change