dear all friends
i have qtek pw10a1 it hange in blue screen qtek ise under screen
g32s54
a3.25.01
3.18.04
and wheni press power and rest isee wallby boot loader v5.22
gsm ok
so how can islove this problem and please tell me how can i do hard rest .
and can i upgrade it with 3.20.06_ENG.exe if yes please tell me steps .
first tell me how can i do hard rest.
where is help iam waiting .
please how can i do hard rest
Hard Reset can be done by unscrewing your pen and sticking twice in the little hole near the earphone connector. But entering bootloader (power button and soft reset) ha teh same effect.
You can not use the exe file for flashing directly, because flashing via exe file requires a ActiveSync connection between PC an Phone...
For flashing read this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
where is help iam waiting .
Click to expand...
Click to collapse
There are just a few hours between your postings. This is not a chat and all useres here are doing their job as good as they can and without getting money for it. So be thankful that you get any help here....
Stefan
thanks for your replay and iam sorry for two post which i wrote i do as you tell me now iwant to flash it but i dont know how can i put it in flash mode i put it in gsm ok but computer cannot see it do inedd any driver so please replay soon
his link describe how you put a rom on a sd card which automaticly
update the device when it's in bootloader mode (the thing you call gsm ok mode)
friend when i put it in gsm ok my computer cant see itit see )unkwon so how can i put it in flash mode please help me in his link there is no way to put it in flash mode
If the file is writtten in correct format on the SD Card and you enter the bootloader with the insert SD-Card, it will go automaticly in Flashmode.
If that happend not on your device, the ROM is not written correctly on the SD Card.
Stefan
at no point in the linked page do your phone have to be detected or comm in any way with the computer
when i press copy it saye please connect your xda to active syinc
how can i connect it to active syice and its hange in qtek. my pc cannot see it
please if any one can tell me how can i do Hard Reset becuase i dont understand (Hard Reset can be done by unscrewing your pen and sticking twice in the little hole near the earphone connector) i think its soft rest and i want hard rest
there is two hole near ear phone connectre do you want me topress it in the same time for secondes i pressed it but same problem
The way to do a hard reset is to remove the power of the battery. This is done by the small hole on the side of the earphone connector, marked with a battery sign.
But this will not help you. You require a SD-Card and an SD-Card writer to flash a new ROM on your device. All have already said on the first postings.
Stefan
friend tell me how can i copy rom update to sd card with boot
Already done. See the link to wiki.....
Stefan
it aske me for nbi files and i dont have it so from where i can download it .
itry rest+power button then i go to flash tools and i select ce os+boot to sd and i copy it completed then i do rest i go to sd download and i download it but same problem .
so from where i can nb1 files
You can use either nb1 or nbf files. You can extract tgat file from any existing ROM in EXE-Format (using winzip) or download the nbf format from the Romkitchen for example....
Stefan
LumpiStefan thanks 10000 you are agood friend phone now back to live thanks
for all your help .
please where can i found ararbic rom thanks
You´re welcome....
As much as ii know there is no Arabic ROM available. Just english, french, spanish, iatlian, german and one chinese version.....
If you take a look at the wiki page, there can you find all available ROMs that are known to me....
Stefan
Related
Hi there,
I tried to run the ATT/Siemens release and it locked up. Per some advice I tried to use the tool provided here to burn the ROM from a SD card, but after I do this I just get a white screen, and my only options is to format the SD card if I insert it.
Is this a lost cause, has the PDA been damaged beyond repair?
Thanks for any help!
t00f
t00f said:
Is this a lost cause, has the PDA been damaged beyond repair?
Click to expand...
Click to collapse
No, it is not. If your device still wants to talk to ActiveSync, you can just get Jeff's .exe file and run it on your PC. If it doesn't talk to ActiveSync, you need a PC SD-card reader/writer, which I think I understand you already have. Just find a ROM image you'd like to flash, either in .nbf format (as supplied with the upgrades) or in .nb1 (as saved by the XDArit tool) format, and follow the instructions on our page.
Good luck...
I tried your tool with the SX56 ROM and get the same results some other people posted here in the past: PDA boots up to a white screen and if you press or hold down the volume botton, the welcome screen partially comes up, but it's not functional.
Also I got ahold of one of your modified ROMs and tried to use that and got the exact results.
t00f
Hmmm, looks like a hardware problem at first glance...
Hello
I just did the following :
download the files from www.carrierdevices.com.au for Qtek 101 update
"Qtek 1010 Upgrade
(22102003-190723)-RSUv1.15_(GPRS_T32500_ENG).exe
File Contents
• CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
• Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
"
When the process began there was an error asking to press OK for restart.
After restarting device in the boot sequence ( when logo is diplayed) there are no informations about the ROM. Just Radion version is diplayed and that is the new version one (3.25)
Also on the display there is no start icon and I cannot use the display because it seems to be decalibrated completly.
Very Important : When I try to connect to Activesync after a while it telling me that the device is not a smartphone or a pocket PC and cannot be connected. So I cant use any program to try to upgrade again.
What to do ?
Please try to give examples and link to download files in order to fix my device.
Thanks in advance
Silviu C.
Hi ...
If you still can get to the boot loader screen (power button + soft reset) and it displays "GSM OK", that means there is a good chance that the flash ROM is not damaged.
You can either put the ROM and RSU files on SD card through a card reader (.nbf files) or to get a valid SD backup for CE + Radio from any working XDA and use the boot loader screen to flash your device again.
Good luck ...
thanks, where I can get some files?
Thank you for your replay,
It seems to be ok cause i can upload a new CE in SD format to the device. ROM was build in the kithcenROM from yorch.net.
It still not working cause perhaps I need the file containing Radio and CE as well in SD format.
Do you know where I can get it ?
I dont think I can get another device to read the files on the SD.
Many thanks,
Silviu C.
I 'm not sure which stage you are stuck with now ... if you can put CE image on SD card and flash it using the boot loader, that means you can boot your XDA and flash the RSU through a normal EXE file from yorch.net .... if this is not the case then you most propably have the wrong file format on the SD card.
Give more details plz
present situation
I am at the edge of disperation.
Steps of what I did :
1. Back up Boot and CE to SD and save them to HDD.
2. Build a CE from Yorch.net in nb1 format and write it to SD with an adaptor.
3. Flash the device with that specific file ( was just CE , not including bootloader)
Now, my pocket is like that:
It cannot been powered from the power button
It start when plug in the charger
I cannot go in bootstrap mode ( when procedure for activating is made I just got a small red flash from the LED)
I have to mention that I choose from the yorch options :" lock butons except power when the device is turned off "
So, now I cannot use the SD for try another flash image.
I cannot use activesync because it cannot recognize the device. Somthing is wrong in the header of the authorising string or something like that.
When I plug the USB cable, activesync is starting but after 10 secs a pop up telling me that the device cannot be recognize, it is not a smartphone or pocket pc.
I am stack.
Thank you
Silviu C.
another question
I have another question:
Is there anywhere - in situation that the problem with boostrap will be solved somehow - full flash containing both radio and CE ?
Thank you,
Silviu C.
some little success
I have suceded by entering in bootrap mode !!
It telling me that I have GSM ERROR
What to do?
IS there any way I can get a full flash for Qtek with radio and OS as well?
Thanks,
Silviu C.
In the boot loader screen, try to press the calendar button ... it should give you the GSM menu. Select "Reset" or "Turn off" and do a soft reset
Plz do NOT try band switching or "Calib/debug"!
It sounds like a failed radio stack upgrade, you can try copying the RSUpgrade.sa.CAB file to your SD card then run it from there.
You can get the RSUpgrade.sa.CAB file by using WinZip to extract it from the RSUv1.15_(GPRS_T32500_ENG)[1].exe file.
HTH
For some odd reason my T-Mobile PW10B1 (as labeled on the back of the device) is identified as PW10A1 in Device Information. I never paid any attention to that, but I got an error 012 when trying to upgrade to T-Mobile W2003. I'm currently running 3.17.03 (the XDA-developers Special Edition ROM v1.2), so perhaps prior upgrade affected the stock ID change from B to A.
How do I change it back to PW10B1, or how do I go about installing W2003 on my messed up device.
Thanks,
Marcin
Marcin,
i have the same with my AT&T. however i'm able to upgrade it to WM2003. the only thing confusing me that after upgrade it is stuck on splash screen, no further load. i tried different methods and versions... no results...
if you find the answer, please let me know
I can fix the problem!
Marcin, all you need to do is get an sd card and reader writer, you can then do the sd method of flashing which bypasses version checking. You will need xdatools also, just pass your mouse over xdatools link and you can download it from there.
very helpful
Nice advice, cgigate...that was very helpful...
cruisin,
I am in the same situation as marcin.
Please confirm my understandingof the bootloading from SD:
1. Using the SD+card reader, I copy the W2003 NK.NBF file to the SD.
2. Insert the SD card into the XDA
3. Goto the bootloader mode (power + soft reset) and press the middle of the rocker key.
4. After the ex counter increases.. at the end, press hard reset.
5. After 60 sec press hard reset again
If this is correct then why do I need the XDATools for?
Copying the file to sd will not work, it needs to be in a special format for the xda to boot the rom burning procedure, you will need xdatools. At the end you push the unscrewed end of the stylus into the tiny hole bottome right of xda, then again after 60 seconds and you should have a working system.
cruisin-thru
Thanks cruisin-thru.
I want to be very clear before starting the upgrade, so..Do I use the OSImageTool to special format for the XDA to boot from the SD?
Thanks again for your patience!
BTW: I did steps 1 to 4 of "unlock Wiz/Wallaby/SER/Backup and
now I (like marcin, have my T-Mobile PW10B1 identified as
PW10A1). I have yet to do the steps 5, 6 and 7. If I do these
steps. Will the identification be corrected?
so..Do I use the OSImageTool to special format for the XDA to boot from the SD?
Click to expand...
Click to collapse
yes after osimagetool have copied the rom to the sdcard the card should be unreadble to anything but the xda's bootloader
Upgrade to W2003
It is my great pleasure to have great and helpful people who advised and suported me in my XDA fiddling adventures. I have now upgraded to W2003 and unlock my phone to use any provider I wish.
Thanks to all!
Melody
Help me please !!
I have a XDA PW10A1 without the instalation cd-rom where do i find the drivers for my XDA ....... please help me !!!
Valikos, the only installation you should need is activesync which is freely downloadable from the microsoft web page.
Yes but!
If i have Win98 SE my computer do not see my xda , there are not drivers for 98 ? ....
Just make sure you have the latest ActiveSync version which is 3.7.1 ... sometimes uninstall then re-install solves this issue.
ok .. another question .... i have all my contacts in to a motorola accompli 008 and like the xda i don't have the instalation cd and no drivers , where do i find the drivers for this one , because i have more that 200 contacts in this one and i wold like to transfer all contacts in the xda
Hi,
I was upgrading the software upgarde on my device. I successfully upgraded the Pocket PC software on the O2 XDA, but when I tried to upgrade the GSM radio/GPRS software of the O2 XDa, it gave some error and after this my device is not starting at all. The only mistake I did was that "I did not remove the SIM card before upgrading the GSM radio/GPRS software" The device does not start even after cold booting the same. When I start the device, the O2 screen comes and after a quite long time the main window does come but I cannot do anything. I tried to tap on contacts, time, tasks but nothing happens. I can see the windows logo wall paper but cannot do anything. Please help on how I can restore back my O2 as a cold reset also does not work. :?
Thanks and Regards
Jinesh
There's many topics about your question in the forum. Search it! Try to search with this keywords: 1% error, repair.zip
There's many topics about your question in the forum. Search it! Try to search with this keywords: 1% error, repair.zip
Hi,
I have tried all the available options but it still does not work. To restore the ROM how do I get access to the O2 cause niether serial nor USB is detecting it.
Please help.
regards
Jinesh
SD card install guide
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
Thanks Chief, I will try out and let you know.
regards
Jinesh
Hi Rudegar,
I tried the procedure given by you. I was able to write to the flash successfully. After writing to the flash it gave a message "Checksum OK, Please cold reboot to reset".
I did a cold reboot. After starting the O2, it showed the O2 logo screen and after quite a long time, it asked me wether I want to format the SD card or not. After that it took me to the default screen of XDA wher eit showed options like "Add today's date, Contacts, Schedule etc etc. but upon tapping any of the options the O2 behaves erratically. If I tap on today's date it takes me somewhere else. Inshort it does not work.
I again did a cold reboot and now the device is in its original position i.e not going after the O2 logo where it gets stuck up.
One thing I would like to mention is that all these activities have been done putting the O2 on the cardle only as the battery is totally discharged and the device turns on only after putting it on cradle. Even after the cold reboot it does not start unless I put it on the cradle whichis connected to the mains. Is it Ok with this or am I doing something wrong? The battery does not charge and hence I have to do it in this way.
Please suggest what wrong am I doing? Any suggestions from anyone will be welcome.
regards
Jinesh
Hi,
Someone posted the original O2 ROM on this site and I downloaded the same after which I was partially succesful in flashing the ROM and reviving my dead O2 back to half life. :roll:
I burned the ROM on
to my SD Card and flashed the ROM on to my O2. After
successfully flashing the ROM I rebooted the device.
The device now starts Windows but it takes atleast 15
minutes to start. I get the today screen. WHen I cick
on start the start menu appears after a delay of 10
seconds and all applications run normal, however all
this happens only on the Cradle only.
When I go into the Battery Settings it shows "Battery
Status Unknown".
Also none of the phone functions work. The SIM card is
not recognized and in device information it does
dispaly the "IMEI number" and the "Protocl Version"
I am only able to use inbuilt phone applications.
Is there some problem with my battery cause it is not
charging even on the cradle.
Device Information does not show Radio Version, Protocl Version & IMEI number at all.
Can anyone please help me?
hello all,
it means that your radio stack are dead. Currently, We don't have any real method to fix this problem. When the radio stack is error, you can not upgrade it or do anything to make it work. We can only upgrade or downgrade the radio stack if it works. Also if you try to upgrade the radio stack, we realy need to flash the chip using a speceial tool or need the sd card which build in radio stack with we can only flash in bootloaading mode. Howerver, in some case, we can fix it but .... I think it is just lucky or the xda error when battery problem.... in this case, just disconnect the battery few minutes and connect it again by pressing the battery hole.
Regards,
Hoanghon
p.s. I have dead xda. I killed it when I upgraded the RADIO STACK. Therefore, if you are really need to upgrade the radio stack, I recommend use the official upgrade for secuirity. or just upgrade the rom only.
Note:
To eliminating the error, you need to upgrade the rom or the radio stack, you need to check if the rom fix the radio stack or the stack you are trying to upgrade it fix the rom or not.(ie, Tmobile Rom have to use it radio stack built for Tmobile pocket pc...... I know that in some case when we mix between the radio stack and OS it works but I don't think it work propertly. Anyhow the mixing bettween radio stack and OS is very dangerous if it doesn't suppport then you have to reflash the radio stack or rom(the OS is Okay but the keep upgrading the radio stack may cause the radio stack killed)
WE NEED SERIAL CABLE FOR PDA ANY HELP PLS!!!
Hi Jineshd we
have the same problem and we are sure that the only way is to do SD uptade
and U said U have a serial cable to Yours device. With that we can be able to download flash gsm rom from working device and put it back via SD card to ours. Pls tell me where can I get a serial cable or some schema how to prepare it and I will try to repair ours dead pdas. Its our only chance
rgds
Lukasz
Hi,
Thanks all for the replies.
Can anyone tell me how doI repair the radio stack?
Regards
Jinesh
no way without having special RSU rom update on SD card and run it from bootloader or dissembling the device and reprograming GSM rom on special rom/bios programing socket. (Here on forum is user Cgigate from Toronto CA who can do it but I cant contact him)
Please, help me in the following situation
I bought Qtek s100 It turns on only in bootloader mode. What was before I don't know.
Now I try to reflash it via PC. I unpacked rom 1.12 from imate and put there file MaUpgradeUt_noID.exe and then ran it. The utility can't see the device information (it is normal) but it can't see the informatin about the rom I'd like to flash. I click @[email protected] but it says it gather information about the device and nothing happened.
I tried to run again about 20 times, but nothing helped.
I tried to flash it via card using rom-image but there is no invitation to reflash though I flashed via card more than 20 times other htc devices and then everything was ok.
I ran mtty 1.42 and gave command d2s, but it said unknown command. Then I gave d2s command then the device turned off.
I have qtek s110 with broken display. Is it possible to change rom-memory?
Is it possible to get service_manual for magician?
Thanks
First of all, did you back up your current ROM to SD before Flashing new ROM.
1. Yes. It's VERY GOOD. Disconnect your device from PC. You need to insert SD with your ROM to the device and Turn On. Press Power or Cancel button (i didn't realy remeber try all). After that device will flash ROM form SD.
2. No. It's VERY BAD. You need to know start address form what device should start after Reset. Sory here i did not know what it is.
Ñïàñèáî çà ïîìîùü!
Ñóòü â òîì, ÷òî àïïàðàò ñ êîìïà øèòüñÿ íàïðî÷ü îòêàçûâàëñÿ. Ïîïðîáîâàë øèòü îáðàçîì ÷åðåç êàðòó (îáðàç ñíÿò ñ t-mobile 1.01). Íà îáðàç íèêàêîé ðåàêöèè.
Äàëåå ïðîáîâàë ñíÿòü îáðàç ñ ïðîáëåìíîãî àïïàðàòà. Àïïàðàò âûêëþ÷àåòñÿ. Åñëè ñ mtty äàòü êîìàíäó øèòüñÿ s2d, òî mtty ãîâîðèò, ÷òî êîìàíäà íåïðàâèëüíàÿ
Hi,
Read this http://forum.xda-developers.com/viewtopic.php?t=46628 about the SD flash
M
thanks, but te problem is the device doesn't want to work with card. No reaction on the card with rom-image, turning off when typing d2s
Don't know where you bought & how much you paid for it (sure hope it's less then a new screen), but sir I guess you're scr*w*d.
Maybe you can replace your broken S110 screen with the one from the S100. There's a rar file on the board, with a detailed description & pictures on howto disassemble your magician, think it's called disassembly.rar.
EDIT You can find it here http://forum.xda-developers.com/viewtopic.php?t=44841
M
thanks, but I think the screen is alive, it shows usb or serial and etc.
As far as i know, there is some diagnostic tests to understand where is the problem. how to activate it?
Diagnostics
Sorry I don't know of a diagnostics test. But you can have a bootloader without a working rom. Since you bought the S100 in a bootloader state, that's very suspicious to me. & that's why I advised you to replace the broken screen on your S110 with the one from your S100.
Hope you can sort it out & if you happen to run across a diag. pls update the wiki with it.
Regards, M