Related
I am stuck at to power on the device with vol down pressed.
All I got is the tri-color bootloader screen and the "00028002 NOT ALLOW" message and than starts the tri-color no menu to flash if I fry with the load file from device...If I use the .exe file with the new room I get the tri-color than the "00028002 NOT ALLOW" ant the flush starts till 1% and after that.....T-mobile mist is starting again.
Here the link's that I followed:
http://forum.xda-developers.com/showthread.php?t=591314
http://www.handy-faq.de/forum/htc_hd...e_aendern.html
Please help me with your suggestions what can I do or if a HSPL is on the was as for the HD Blackstone.
Still looks that I need your help MASTARS!!!...Thanks mates.
Hi, there is a mistake in the manual. For a hardreset you have to press volup and voldown together and than press the power button.
HD2 T-Mobile brandet
I have follow your suggestions...I get the manufactury restore message and the unit is loading the original T-Mobile image....I am stuck...
Please help
sounds like your trying to flash the device with another ROM, if so do a search for leo gold card this will allow you to flash original htc ROMs only until hard spl is finished.
HD2 T-Mobile brandet
You are right...I have purchased this unit (over 600 Euro) and I needed in English.
I have done the Gold card procedure with two different micro-SD cards and still no success...now I am powerless and really mad...what is the next step???
I hope that this issue can be solved only with your help MASTERS OF HTC Phones
What problem do you have with the micro-sd ? what about formatting the sd-card, have you done it in the quick modus or in the normal mode ? And why did you read a german discription, when you're from canada ?
HD2 T-Mobile brandet
HIPP HIPP HUREYYYYY
Is done.
please follow the usual instruction on this link....plus ...IMPORTANT, pay attention also to this steps listed below
http://forum.xda-developers.com/showthread.php?t=591314
Format SD card from within WinMo
Place LEOIMG.NBH on the SD card
Read CID with QMAT
Request GoldCard.img with CID, I believe I did not change the first 2 numbers
Write the goldcard to the SD, by having ActiveSync active, and "Write Image" in QMAT.
Reboot to boot-loader by Volume down and power button ate the same time
Reconnect your HD2 to your PC start active sync and run the new room extracted locally on your PC (bubble click on "ROMUpdateUtility.exe" and also do not forget that on this package the "LEOIMG.nbh" is also there renamed form original format.
Many thanks to all of you working to solve our dummies problems.
I wish you also success to get the HSPL soon up and running..
Best regards
tomtom140 said:
HIPP HIPP HUREYYYYY
Is done.
please follow the usual instruction on this link....plus ...IMPORTANT, pay attention also to this steps listed below
http://forum.xda-developers.com/showthread.php?t=591314
Format SD card from within WinMo
Place LEOIMG.NBH on the SD card
Read CID with QMAT
Request GoldCard.img with CID, I believe I did not change the first 2 numbers
Write the goldcard to the SD, by having ActiveSync active, and "Write Image" in QMAT.
Reboot to boot-loader by Volume down and power button ate the same time
Reconnect your HD2 to your PC start active sync and run the new room extracted locally on your PC (bubble click on "ROMUpdateUtility.exe" and also do not forget that on this package the "LEOIMG.nbh" is also there renamed form original format.
Many thanks to all of you working to solve our dummies problems.
I wish you also success to get the HSPL soon up and running..
Best regards
Click to expand...
Click to collapse
did you have to rename the signedRUU.NBH to LEOIMG.nbh when flash from PC?
HD2 T-mobile brand
Yes ...I have renamed the signedRUU.NBH to LEOIMG.nbh
Still ..I must say that after testing all day I was not taking the chance to go with the original signedRUU.NBH...so I have renamed the file
u mean ur device starts at the first image?
use gold card?
brick?
have u flash another official rom before?
HD2
I have flush many official rooms on HD blackstone
I have follow all steps in my link ...plus I had to go with the steps posted previous in order to flush my T-Mobile branded unit.
Yes I had to use the gold card as in description plus the registry ending from 2 to 1
bqwd36 said:
u mean ur device starts at the first image?
use gold card?
brick?
have u flash another official rom before?
Click to expand...
Click to collapse
Hi all,
Before I post here I have googled over the internet looking for a solution and i have read alot but no success, i have tried many different suggested solutions but all have failed, so that I'm here to ask who have faced a similar situation of me.
My HTC HD2 was having SPL-1.42 with its original stock ROM, then I decided to upgrade for a cooked ROM so that I installed the HSPL then it became SPL-1.42 HSPL, that was fine then I'm were able to upgrade to any cooked ROM, I have flashed my device with many different ROMs even the stock ones, every thing were very fine till I upgraded to the stock ROM of leo 2.10 "RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship" by via the MicroSD card and now stuck with the SPL-2.08 as shown in the attached photos.
I tried to flash again using the EXE file from my PC but it take very long time the fail even with the original stock ROM of my device, and I tried to flash using the SD card but it take very long time just showing a white screen labeled "loading..." and no more activity.
I attached some photos showing the problem.
I know its my fault because I did not read the warning in the text file that included with the ROM folder "Do not flash using the MicroSD"
So that, I'm looking for a solution... please help..
any help will be appreciated.
Thanks in advance..
Note: pardon me about my poor English.
xda_q8 said:
Hi all,
Before I post here I have googled over the internet looking for a solution and i have read alot but no success, i have tried many different suggested solutions but all have failed, so that I'm here to ask who have faced a similar situation of me.
My HTC HD2 was having SPL-1.42 with its original stock ROM, then I decided to upgrade for a cooked ROM so that I installed the HSPL then it became SPL-1.42 HSPL, that was fine then I'm were able to upgrade to any cooked ROM, I have flashed my device with many different ROMs even the stock ones, every thing were very fine till I upgraded to the stock ROM of leo 2.10 "RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship" by via the MicroSD card and now stuck with the SPL-2.08 as shown in the attached photos.
I tried to flash again using the EXE file from my PC but it take very long time the fail even with the original stock ROM of my device, and I tried to flash using the SD card but it take very long time just showing a white screen labeled "loading..." and no more activity.
I attached some photos showing the problem.
I know its my fault because I did not read the warning in the text file that included with the ROM folder "Do not flash using the MicroSD"
So that, I'm looking for a solution... please help..
any help will be appreciated.
Thanks in advance..
Note: pardon me about my poor English.
Click to expand...
Click to collapse
Heya i think ur stuck now on that SPL 2.08 havent heard any1 succeeding in putting hspl on it atleast from what ive read.
The cause is because u flashed that Tmous ROM trough MicroSD which overwrites the hspl.
I think if u had read the stickies more carefully this could be avoided but u can still flash Tmous roms some1 correct me if im wrong. hope this helps a bit
Thanks for replaying,
yeah you are right I have to be more careful but now its done and stuck with SPL 2.08.
anyway, I have tried to falsh it using Tmous ROMs but it faild, it says "this device is not suitable for this ROM" then exit, by the way, my device is the Asia version and I tried to flash it using the new officially updated ROM from htc.com but it also failed, it take very long time more than 15 minutes with no activity the I disconnect the USB from the device to save the battery charge, I'm afraid to stuck with a dead battery. When I disconnect it the upgrading software on my PC asking me to restart the device and reconnect it again then I did, the official upgrading software recognise the device then start to flash it but it stuck at beginning of the flashing process it just change the screen of the device to the back background with the progress bar its reading 0% and take very long time then i disconnect it.
by the way, is the any way to downgrade the SPL to 1.42 ?
any help please..
Thank you.
Last week I also face this problem. But I'm not using SD card to flash the room.
However, I backup my sd card then format the card, it become will afther this.
Same thing happened to me. This is what I did, removed the battery for about 10 seconds and flashed the original ROM. Then reflashed HSPL. It worked for me.
Thank you all for replaying..
I tried to do as you did but no success at all.
well, what next ?
Thank you
silentP said:
Same thing happened to me. This is what I did, removed the battery for about 10 seconds and flashed the original ROM. Then reflashed HSPL. It worked for me.
Click to expand...
Click to collapse
i believe to try to flash Original Rom from SD Card. not from PC.
i personally save my stock rom in SD card for future use in case of emergency.
Thanks for replaying
I tried to flash using the stock ROM is SD card but it failed, it shows a white screen with a "Loading..." word only, no activity.
Any help please..
You must use GoldCard repaired your device .Look here (Post 31 & 41) Repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card :
http://forum.xda-developers.com/show...=640183&page=4
You must change Tmous 2.07 ( in guideline article ) replaced by your ship rom 2.10.
same happened to xmoo....just letter xmoo about your problem...i hope he can help you....
ancola66 said:
You must use GoldCard repaired your device .Look here (Post 31 & 41) Repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card :
http://forum.xda-developers.com/show...=640183&page=4
You must change Tmous 2.07 ( in guideline article ) replaced by your ship rom 2.10.
Click to expand...
Click to collapse
Ok this is solution for that problem
no success yet..
but i'm confused about how to use the goldcard ?
I tried to you the attached goldcard.img from the post Id=640183&page=4 but no success.
is the goldcard.img dedicated to a specific device based on its CID ? or it can be used for any device ?
Thank you
Surely XDA Mods should take down the SD card method as there are about 10 threads a week of flashing the 2.10 ROM via SD card and getting stuck cause they don't read enough before hand - if the SD card method isn't there people won't brick their phones!!
{Solved} HTC HD2 stuck at beet loader...
Hi all,
finally I got my device running
by flashing it using Goldcard method, I bought the PSAS software and flashed it using Tmous 2.10 and now it is running fine.
well, the steps as the following:
1- getting the CID of the SD card that you are going to use for flashing you device, I used linux OS to get the CID of my SD card by:
linux host #>more /sys/class/mmc_host/mmc1/mmc1:*/cid
that will give you the CID of the SD card.
2- Start the PSAS software and must be registered then go to Calculations/Generators then select Generate HTC goldcard.
3- then click "Save Goldcard Image to file", rename it whatever you wanna name for example "goldcard.img".
4- Use HxD Hex Editor, then select Extras from the menu then Open disk image..
5- Use HxD Hex Editor, then select Extras from the menu then Open disk...
6- then click on "goldcard.img" tab then select the lines from 00000000 to 00000170 all the file content by high lighting it, then select Edit -> Copy.
7- then go to the disk tab the containing the sd card, then select the same addresses (00000000-00000170) then Edit -> Paste Write, then save the new content.
8- copy a leoimg.nbh to the SD card, its recommended to get it from the ROM that bricked your device. I'm used Tmous 2.10.
9- insert the SD card into your device then boot it to the bootloader by holding the volume switch down while your switching the device on.
10- wait for the menu to appear and follow the instruction to complete.
Thats work from me and should work for you.
by the way, I flashed US Tmous while my device is Asian.
Thank you all
and
Best regards
if you have your CID I may help you to generate the suitable goldcard.img for your device.
I think I've read that even though you are stuck on spl 2, now that you have it running you should be able to flash roms with sspl but you won't be able to change the radio.
HTML:
till now I'm not sure about the radio, any way, I'm trying to hack it, i successfully initiated the process of radio upgrading but it failed at 99%.
we gonna do it one day...
EddyOS said:
Surely XDA Mods should take down the SD card method as there are about 10 threads a week of flashing the 2.10 ROM via SD card and getting stuck cause they don't read enough before hand - if the SD card method isn't there people won't brick their phones!!
Click to expand...
Click to collapse
I tought I read througout numurous posts that the SD method is the prefered way to go?
xda_q8 said:
Hi all,
finally I got my device running
by flashing it using Goldcard method, I bought the PSAS software and flashed it using Tmous 2.10 and now it is running fine.
well, the steps as the following:
1- getting the CID of the SD card that you are going to use for flashing you device, I used linux OS to get the CID of my SD card by:
linux host #>more /sys/class/mmc_host/mmc1/mmc1:*/cid
that will give you the CID of the SD card.
2- Start the PSAS software and must be registered then go to Calculations/Generators then select Generate HTC goldcard.
3- then click "Save Goldcard Image to file", rename it whatever you wanna name for example "goldcard.img".
4- Use HxD Hex Editor, then select Extras from the menu then Open disk image..
5- Use HxD Hex Editor, then select Extras from the menu then Open disk...
6- then click on "goldcard.img" tab then select the lines from 00000000 to 00000170 all the file content by high lighting it, then select Edit -> Copy.
7- then go to the disk tab the containing the sd card, then select the same addresses (00000000-00000170) then Edit -> Paste Write, then save the new content.
8- copy a leoimg.nbh to the SD card, its recommended to get it from the ROM that bricked your device. I'm used Tmous 2.10.
9- insert the SD card into your device then boot it to the bootloader by holding the volume switch down while your switching the device on.
10- wait for the menu to appear and follow the instruction to complete.
Thats work from me and should work for you.
by the way, I flashed US Tmous while my device is Asian.
Thank you all
and
Best regards
if you have your CID I may help you to generate the suitable goldcard.img for your device.
Click to expand...
Click to collapse
I also bought PSAS and used my old TP to goldflash the card. Then flashed it with the TMOUS ROM using SD method. After that it game back to life and only way to flash other roms is using sspl. Only thing now is that I'm stuck with this TMOUS initial splash screen.
Also you can change the splash screen using SSPL,till now you can change what ever you wanna change using SSPL except the radio and SPL flashing.
now i'm looking for flashing the radio with some how.
tamAyT:
SD card method should be used a last resort and only if you know what you're doing - it's a million times easier to use HSPL and ActiveSync as if it fails it's easy to recover. I've never used the sd card method and after reading what it can do if you don't read into the ROM well enough it's not worth the hassle IMO
BladeKnight said:
same happened to xmoo....just letter xmoo about your problem...i hope he can help you....
Click to expand...
Click to collapse
HAHAHA.
For me changing the first 2 00 in de hex edit of the goldcard to 11 fixed the issue.
Radio 2.08 is greate.. SPL 2.08 is greate... So no problems a.t.m., if I need a stock rom I use SSPL...
But then again I hope someone comes with HSPL 2.x tho.
Hi all,
I 've had my HD2 with T-Mobile UK for just over a month now... Love it, but as always the case with HTC phones, stock roms are noway near as good as cooked ones..
I have been flashing new roms with previous devices I owned (Wizard, S710, Diamond), but I am a bit hesitant with HD2. The reason is T-Mobile.. They told me that I'll invalidate my 2-year warranty if I do, so I was wondering is there a way to find the stock T-mobile rom and radio to go back if i need to send the phone out for repair?
Thanks and apologies if this has been mentioned elsewhere.. I did search, only briefly I admit..
by far the easiest would be to dump (backup) what you have on it now [i think there is a tut in the blackstone forum]
then hspl and flash a cooked rom after that.
dumps from original roms are fairly easy to put back together with one of the kitchen packages
Tokolosh said:
by far the easiest would be to dump (backup) what you have on it now [i think there is a tut in the blackstone forum]
then hspl and flash a cooked rom after that.
dumps from original roms are fairly easy to put back together with one of the kitchen packages
Click to expand...
Click to collapse
thanks for that... i'll look for that tutorial, not sure i quite understand what i need to do with the kitchen package.. is there a tut for that too?
Hi sgiannis,
Try the following, look at Pagnell's post (#6)
http://forum.xda-developers.com/showthread.php?t=607584.
This is Version 1.43 (t-mobile) and is where i downloaded it from and it works fine.
First link in the first post of this sticky thread http://forum.xda-developers.com/showthread.php?t=577717 is a shared folder for Official ROMs. I uploaded the T-Mob UK ROM into the 1.43 folder and it is the exact same ROM I keep on my storage card for warrenty purposes.
By the way, the best way to flash for restoring warrenty purposes is to extract the exe into a new folder, rename the RUU_Signed.nbh to LEOIMG.nbh and then place it in the root of your SD card. Enter into bootloader (hold the volume down when turning the phone on and then when prompted press the power button. This will restore your SPL, radio and ROM to the correct versions for warrenty. I keep the nbh in a folder on my sd card just in case...
First link in the first post of this sticky thread http://forum.xda-developers.com/showthread.php?t=577717 is a shared folder for Official ROMs. I uploaded the T-Mob UK ROM into the 1.43 folder and it is the exact same ROM I keep on my storage card for warrenty purposes.
By the way, the best way to flash for restoring warrenty purposes is to extract the exe into a new folder, rename the RUU_Signed.nbh to LEOIMG.nbh and then place it in the root of your SD card. Enter into bootloader (hold the volume down when turning the phone on and then when prompted press the power button. This will restore your SPL, radio and ROM to the correct versions for warrenty. I keep the nbh in a folder on my sd card just in case...
Click to expand...
Click to collapse
perfectly explained and working
i did this yesterday evening after i established the reason of my internet disconnects is a hardware problem
i just reflashed the stock tmob rom from the sdcard and voila
sent off today - will get back in 14 days, i feel so lonely..
cgrec92 said:
perfectly explained and working
i did this yesterday evening after i established the reason of my internet disconnects is a hardware problem
i just reflashed the stock tmob rom from the sdcard and voila
sent off today - will get back in 14 days, i feel so lonely..
Click to expand...
Click to collapse
B4PJS said:
First link in the first post of this sticky thread http://forum.xda-developers.com/showthread.php?t=577717 is a shared folder for Official ROMs. I uploaded the T-Mob UK ROM into the 1.43 folder and it is the exact same ROM I keep on my storage card for warrenty purposes.
By the way, the best way to flash for restoring warrenty purposes is to extract the exe into a new folder, rename the RUU_Signed.nbh to LEOIMG.nbh and then place it in the root of your SD card. Enter into bootloader (hold the volume down when turning the phone on and then when prompted press the power button. This will restore your SPL, radio and ROM to the correct versions for warrenty. I keep the nbh in a folder on my sd card just in case...
Click to expand...
Click to collapse
thanks guys.. appreciate that..
one thing:when you say place it in the root of my sd card, is that in any folder I choose or does it have to be somewhere specific? sorry if that's too basic..
you should format your sd card to FAT32 before you do this
so back up all your stuff on your computer so you can put it back on once youre done
one thing:when you say place it in the root of my sd card, is that in any folder I choose or does it have to be somewhere specific? sorry if that's too basic..
Click to expand...
Click to collapse
no, no folders, literally just put it in the sd card
Computer/SDCARD/
hope this helps
as soon as you launch your phone in bootloader the instalation will begin automatically
cgrec92 said:
you should format your sd card to FAT32 before you do this
so back up all your stuff on your computer so you can put it back on once youre done
no, no folders, literally just put it in the sd card
Computer/SDCARD/
hope this helps
as soon as you launch your phone in bootloader the instalation will begin automatically
Click to expand...
Click to collapse
Great then.. i cant wait to get back into the 'flashing industry' again will be a while though cause swamped with work..
thanks everyone..
Hi Guys,
I'm kinda stuck here, hope you'll be able to help:
Situation is as follows:
I have an HTC Leo, and after 2 months of usage - got the white screen:
1. Tried soft reset - no good
2. Tried hard reset - no good
3. Cannot sync to PC with ActiveSync - does not detect the device
4. Can go to boot mode, but only with voulme down+soft reset button
5. Cannot sync in boot mode as well - there appears to be a "USB" writing at the bottom, (white line on boot mode) though ActiveSync does not detect via usb?
6. Tried to install HSPL2 - starts to install, never finishes, proggress bar goes up and down forever (on PC) - I believe device needs to be synced before installing?
7. Device is enabled in the device manager, though cannot explore - thus no access to SD card
8. Here we go, I seem to do something wrong, PLEASE HELP, I payed for the device about 400E in my country, stock warranty is not an option
9. HEEEEEEEEEELP
10. Thanks!!!
Try flashing the stock ROM for your HD2 via SD card. If you have a T-Mobile HD2 then go to T-Mobile.com to download the ROM you will have to enter the IzmEI number from under your battery to download it. If you have a international HD2 go to HTC.com and enter your serial number that is under your battery to getca list of ROMs you can download and install on your HD2. If the ROM is a .exe you will have to right click it and renamecthe file .zip to view the contents. After that follow the instructions in the thread linked below to flash the ROM.
http://forum.xda-developers.com/showthread.php?t=681317
[Q] Thanks
Hi, thanks for the info,
When I go to HTC homepage, i find "Rom Upgrades" - is that the same as the ROM itself?
Sorry if the q is dum ,I'm completely new in this
And also - does the card have to be empty (only ROM in) so that the phone boots it?
Thanks again
yasho1984 said:
Hi, thanks for the info,
When I go to HTC homepage, i find "Rom Upgrades" - is that the same as the ROM itself?
Sorry if the q is dum ,I'm completely new in this
Click to expand...
Click to collapse
Yeah that is what you are looking for. The ROM upgrades is the most recent official ROMs out for the HD2. Just make sure you use your serial number to make sure you get a ROM that is for your HD2 or you will not be able to flash it unless you get HSPL on your HD2. Also make sure the HTC site you are on is for your part of the world, your country or the country the HD2 originated from.
[Q] Hi again, last q
When I Explore the contents of the rom I see numerous files, and reading the instructions you linked tells me to rename an image. The ROM is an exe, so I renamed it to zip , explored and currently I see only one .nbh file:
RUU_signed.nbh
Should I rename this one to LEOIMG.nbh and copy this file only to SD card? Or rename and leave there, take the whole exe and put it into the SD Card?
Would that be sufficient to run the ROM in bootload?
Thanks again brother, you're a lifesaver
yasho1984 said:
When I Explore the contents of the rom I see numerous files, and reading the instructions you linked tells me to rename an image. The ROM is an exe, so I renamed it to zip , explored and currently I see only one .nbh file:
RUU_signed.nbh
Should I rename this one to LEOIMG.nbh and copy this file only to SD card? Or rename and leave there, take the whole exe and put it into the SD Card?
Would that be sufficient to run the ROM in bootload?
Thanks again brother, you're a lifesaver
Click to expand...
Click to collapse
Just take and copy the RUU_signed.nbh file make a copy ofcthe file and past it to your desktop and then rename it to LEOIMG.nbh then copy that file to the root of your SD card. All you have to have is the .nbh file but it has to be named LEOIMG.nbh.
You can also flash a radio, splash screen, and MAGLDR this way if need be. But you would still have to flash CWM via custom RUU via USB if you installed MAGLDR.
[HIHI]
Great - now "Radio fail" - update terminated... any ideas?
Exact error description:
00018003
LEOIMG.nbh - Fail
RADIO - Fail
Update Terminate
UPDATE FAIL
and this is an official HTC ROM?!?
yasho1984 said:
[HIHI]
Great - now "Radio fail" - update terminated... any ideas?
Exact error description:
00018003
LEOIMG.nbh - Fail
RADIO - Fail
Update Terminate
UPDATE FAIL
and this is an official HTC ROM?!?
Click to expand...
Click to collapse
Sorry I had to get some sleep, anyway I suggest you first make a backup copy of your SD card and then reformat your SD card using the Panosonic Mick SD card formatting software, just Google it you will find it. Do a full wipe of hour cardcand format it using Fat 32. Then copy the LEOIMB.nbh to your card and try it again. Also try to use a card no bigger than a 8GB as bigger SD cards are prone to give people problems when flashing via SD card. Note I did not say they will notcflash a ROM, bit they sometimes give people trouble.
Also I forgot to tell you this morning that if your HD2 says USB in the white bar of bootloader and it also says HTC USB sync in the device manager in the control panel of your computer, then you have a Sync connection to your computer but you can not use this connection for anything bit to flash different software to your HD2.
[Q] Hi Buddy, 10x for staying so long :)
Sorry brother,
I really appreciate your help so far.
Same Sh*t - even after FAT 32 format
When tried to upgrade with the official HTC ROM - "RUU_signed...." (not via SD) HTC boot screen appeared, but after 1% said : Image corrupted". It coud be that the stock rom sucks big time. May be try with some Artemis?
yasho1984 said:
Sorry brother,
I really appreciate your help so far.
Same Sh*t - even after FAT 32 format
When tried to upgrade with the official HTC ROM - "RUU_signed...." (not via SD) HTC boot screen appeared, but after 1% said : Image corrupted". It coud be that the stock rom sucks big time. May be try with some Artemis?
Click to expand...
Click to collapse
Yeah maybe you got a bad download of the ROM. If that was the only official ROM you could down load. I would try to download it againcand delete the first copy you downloaded, or I would flash HSPL. to my HD2 and then try to flash the stock ROM are a custom ROM. Custom ROMs are better than stock ROMs anyway. Just remember though if you have a warranty and you need to send your HD2 in for warranty work or exchange you need to revert your HD2 back to complete stock. This means ROM, radio, and SPL.
hey guys,
i've been trying to fix a problem with my hd2 but it's hopeless. the phone just shuts down and i have a white screen when i try to start it up again (my battery is 80% full). after multiple tries my NAND rom finally boots and i can only surf through it for 10 minutes, after that the same cycle repeats itself...
any ideas????
You're either using a kernel that is undervolted so your phone can't sustain itself, so change the kernel or rom. Or your phone just has problems and needs to be sent to repair.
thank you so much for your answer!! i'll try searching the forums to find out how to put back Wm 6.5
denieru said:
thank you so much for your answer!! i'll try searching the forums to find out how to put back Wm 6.5
Click to expand...
Click to collapse
Easy.
Download a CORRECT STOCK ROM.
Extract it with 7zip/ Winrar. Find the file name: RUU_signed.nbh Rename it to: leoimg.nbh
Copy leoimg.nbh to the root directory of your SD Card.
(dont forget to reformatted your SD card)
Go into bootloader, and follow the onscreen instruction.
Goodluck