Related
So, I'm experiencing what everybody else is with this ROM. That initial volume level starts out soft and gradually increases to the max that I have it set to. Some have stated they like this and that's fine. But, I HATE it :evil: . I can never hear my phone ring anymore if it's in my pocket. Has anybody found a possible registry key or setting somewhere to turn this off?
And if any AT&T folks are listening.. I'd like a setting in the volume area to turn this off or on.
Phone Profile
Have you check under phone profiles... Ascending Ring change to Standard Ring
Dustoff
I don't have a phone profile, or i should say i don't see any where for that option. In the phone settings area the Ring Type is set for Ring. There is an option for "Increasing Ring" but that's even worse than it is already. I don't think this is what I'm looking for.
Since the WM2003 upgrade on my SX56, 've noticed issues with the speakerphone volume. I can barely hear it in fact. Any thoughts on this one?
Fiddled around with the volume setting, moved it up and down, and the now the volume issue seems resolved. Can't say for sure if that's what resolved it, but it's fine now.
I'm experiencing the same problem with the AT&T rom.. I'm going to take a look around in the registry later on... before I go installing any apps
Well I have taken a look @ the processes running and can't see anything obvious that would be doing the volume thing..
So I have had a poke about in the registry and have found a section with sound profiles and it has an attenuation property, I have tried adjusting this, and deleting it but still no good
Also there is an entry in the registry called Hack and mentioned Vol in the string... but it didn't make any difference when I deleted that either :roll:
If anyone thats a bit more acomplished than myself with the PPC Phone could take a look and find a solution to this, i'm sure many users would appreciated it
Has anyone figured out how to make the volume level constant yet?
Any solutions to get the volume working well on A.30.09 ENG yet?
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
valheru said:
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
Click to expand...
Click to collapse
Another thing try ur Reminder set an Alarm you'll notice that you cannot change the Alarm1 ringtone thus the sound stays low ..I tried many things in the registry and no luck as well I wish would some1 help us to resolve this Issue, but!! I made contacts with att's support ,I told them about this problem thus I'm not the only one who's experiencing this, lots of ppl sees this ennoying , I hope they would help here...
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
onurd said:
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
Click to expand...
Click to collapse
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
anonimo said:
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
Click to expand...
Click to collapse
I have the exact same problem. When I am in a public place and when there is some noise around, I hardly hear the person I am speaking to. Even when I turn the wheel on the left to maximum
I have spent a lot of time looking for a solution but I have just seen that for some qtek devices, there is the key [HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN] with values EARPHONE_UPLINK_VOLUME and RECEIVE_UPLINK_VOLUME, that allow to modify the max output level of the speaker. But I didn't find that key in the trinity
Even if I turn the scroll wheel all the way up, the volume is too low.
The audiogain registry key (although it doesn't exist in trinity's registry) is actually to improve the sound quality of the microphone and not the volume of the phone.
When I first make a call, when I hear the first ring, it is actually louder but then from the second ring on, the volume decreases at least by 25%.
Anybody with any ideas?
anyone figured how to increase call volume yet?
I would also appreciate a solution to improve the Speakerphone volume.
I would appreciate any fix to increase the volume of anything!
The included stereo headphones are completely useless! My god, why did they even put a volume dial on the headphones? I can barely hear anything with this crap phone...
A pity considering every other features works just perfectly.
ive got the same problem, before the bass fix, the volume was high but with a really unstable and bad sound... after the fix, there is kind of better sound but in phone calls the volume is low.. i really start hating this device......
I've been using my new p3600 for two weeks now, and this low speaker volume issue is killing me. I've been a Noia user for years, and the difference in sound quality during normal calls is simply unacceptable. The p3600 has so many awesome capabilities for such a small phone, but when it comes to the most basic function, I'm quite disappointed with.
I would also appreciate a fix to improve the quality of the speaker.
Cheers
i can say that this is not the only problem, there are so many others that i stopped thinking of this one... im going for a final hard reset now.. im really tired...im sick of it.....
Someone has an idea ?
Has anyone found away to increase the incall volume yet ???
Someone posted this registry hack elsewhere (use at your own risk of course)
1. HKEY_CURRENT_USER
2. ControlPanel
3. SoundCategories
4. InCall
5. InitVol
6. Change the DWORD value to 6 (Default = 2)
7. Click Done
Wait approx 10-15 seconds before testing.
PS. If the registry key or value doesn't exist, you can always try creating it.
Has anyone tried this??
What was the outcome??
ausi said:
Has anyone tried this??
What was the outcome??
Click to expand...
Click to collapse
Yes i tried it and it never worked for me ...
i can also confirm that this does NOT work on the trinity, anyone else have any bright ideas...
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
schizo said:
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
Click to expand...
Click to collapse
hi this link doenst work "include this patched driver in newly cooked ROM"
zohaer21 said:
hi this link doenst work "include this patched driver in newly cooked ROM"
Click to expand...
Click to collapse
Sorry zohaer... my post does not contain hyperlink.
I just underlined it to stress up some points...
push!
also need a solution
hi guys,
i still have a list of hd2 issue yet to be solve, can any kind soul reply with solutions here in sequence.
1) when i am on my wired earpiece, the volume is so max that it can be unbearable at times. i know i have the volume rocker to up and down the volume to suit my hearing but then if i lower my volume it also carried the low volume to the connected calls. is there a workaround for this?
2)when i am on a connected call, i can hear hissing sound which is so irritating and the other party on my line ask if i'm on speakermode. workaround? volume is soft as well by the way.
3)phone hangs alot and i have to remove the cover and battery, the usual standard procedure. i know it could be manila.exe accumulating resources so high that it can be disruptive. the only solution i have now is restart at periodic time to maintain phone usefulness.
4)Weather not updating.
5)Flash player on HD2 if there is.
i cant think of anymore now.. maybe later..
sometimes when i felt my phone was stable for a few days it hangs unexpectedly. but there so much tweaking that needs to be done on this phone that i have to take a risk bricking the phone. there is really endless tweaking to this phone. imagine if i were to hardreset and reinstall all tweaks and stuffs .. it will be a nightmare when i have gone so far in tweaking it.
thats WM..
kelvinchewsg said:
hi guys,
i still have a list of hd2 issue yet to be solve, can any kind soul reply with solutions here in sequence.
1) when i am on my wired earpiece, the volume is so max that it can be unbearable at times. i know i have the volume rocker to up and down the volume to suit my hearing but then if i lower my volume it also carried the low volume to the connected calls. is there a workaround for this?
Click to expand...
Click to collapse
try this in attachements it will allow two control system volume and ring volume separetly just click volume bottom and see
hoss_n2,
thanks bro, appreciate this little cab... i have install it and i must say i have gain another level to a perfect tweak. Thanks again bro..
kelvinchewsg said:
hoss_n2,
thanks bro, appreciate this little cab... i have install it and i must say i have gain another level to a perfect tweak. Thanks again bro..
Click to expand...
Click to collapse
at your service
hoss_n2,
one question here, when im on Ring config, i press the volume rocker up and down, i get almost the same sound level whether im on on max vol or min vol
i do hear a difference on the System config when i up/down the volume..
do u have this issue?
kelvinchewsg said:
hoss_n2,
one question here, when im on Ring config, i press the volume rocker up and down, i get almost the same sound level whether im on on max vol or min vol
i do hear a difference on the System config when i up/down the volume..
do u have this issue?
Click to expand...
Click to collapse
soft reset and see again as i don't have this problem. you must adjust the ring not during the phone is ringing but before it tell me if it works
kelvinchewsg said:
hi guys,
i still have a list of hd2 issue yet to be solve, can any kind soul reply with solutions here in sequence.
1) when i am on my wired earpiece, the volume is so max that it can be unbearable at times. i know i have the volume rocker to up and down the volume to suit my hearing but then if i lower my volume it also carried the low volume to the connected calls. is there a workaround for this?
2)when i am on a connected call, i can hear hissing sound which is so irritating and the other party on my line ask if i'm on speakermode. workaround? volume is soft as well by the way.
3)phone hangs alot and i have to remove the cover and battery, the usual standard procedure. i know it could be manila.exe accumulating resources so high that it can be disruptive. the only solution i have now is restart at periodic time to maintain phone usefulness.
4)Weather not updating.
5)Flash player on HD2 if there is.
i cant think of anymore now.. maybe later..
sometimes when i felt my phone was stable for a few days it hangs unexpectedly. but there so much tweaking that needs to be done on this phone that i have to take a risk bricking the phone. there is really endless tweaking to this phone. imagine if i were to hardreset and reinstall all tweaks and stuffs .. it will be a nightmare when i have gone so far in tweaking it.
thats WM..
Click to expand...
Click to collapse
You better read this thread
http://forum.xda-developers.com/showthread.php?t=588925
Its a comun issue and so far no one has manage to fix it, some units are defective, if you can get a new phone.
I have it and been doing all fix and nothing i even here my own voice on echo very annoying
SOLRAC13 said:
You better read this thread
http://forum.xda-developers.com/showthread.php?t=588925
Its a comun issue and so far no one has manage to fix it, some units are defective, if you can get a new phone.
I have it and been doing all fix and nothing i even here my own voice on echo very annoying
Click to expand...
Click to collapse
no itis service issue i had this but when i changed the service like from vodafone to mobinil this problem disappeared
http://www.youtube.com/watch?v=yygZ3X__yIo
hi Guys,
i posted a video, mind taking a look here
yes i did a soft reset everytime i install a cab..
http://www.youtube.com/watch?v=yygZ3X__yIo
any more solutions?
kelvinchewsg said:
any more solutions?
Click to expand...
Click to collapse
the video is not showing the ring control problem
Hi,
For some reason my phone will automatically drop the volume to 1/4 the full volume.
Even if I just made a call (and adjusted it to full) then go to call someone else it will drop.
any ideas ?
Thanks
You may have another setting or program interfering.
Bruce Inman said:
You may have another setting or program interfering.
Click to expand...
Click to collapse
It did this out of the box.. and doesn't happen consistently.. any ideas ?
I had the same problem - possible fix
I had the same problem, when I answerd a call the volume was at 1/4 even after turning it up in previous calls. This (taken from forum.xda-developers.com/showpost.php?p=4840214&postcount=12) fixed part of it. Now when I answer a call the volume is always at max.
Increase voiceVolume:
Registry: HKCU\ControlPanel\SoundCategories\InCall
Key: AttenuationCategory
Default: 2
New Value: 1
Registry: HKCU\ControlPanel\SoundCategories\InCall
Key: InitVol
Default: 3
New Value: 7
I'm using the stock ROM for Att's Pure. I still think the sound quality isn't quite up to par with my old tilt(kaiser).
I tried the other steps listed at the thread above but couldnt get them to work. When I changed the path to the new AudioPara3_ATTMax.csv file I got no sound like it was mute.
Full post here - forum.xda-developers.com/showthread.php?p=4840214 - ATT Tilt 2 In Call Volume. Sorry for the blue txt, I cant post links yet
Thanks for the tip Linwe.
I guess that is why I've never experienced this because one of the first things I do is replace the AudioPara file.
Stock volume sucks.
Bruce Inman said:
Thanks for the tip Linwe.
I guess that is why I've never experienced this because one of the first things I do is replace the AudioPara file.
Stock volume sucks.
Click to expand...
Click to collapse
Thanks so much for that file! I tried the ones on the other thread and couldn't get them to work, this one works great. I used total commander to overwrite the original \Windows\AudioPara3.csv file and the in call volume is 100% better now.
linwe said:
Thanks so much for that file! I tried the ones on the other thread and couldn't get them to work, this one works great. I used total commander to overwrite the original \Windows\AudioPara3.csv file and the in call volume is 100% better now.
Click to expand...
Click to collapse
Yeah, there was a set of 3 versions for Low, Mid and High w/Dist floating around but I didn't care for the distortion on high, this one works much better.
Im not sure what I am doing wrong. I copied the new file and pasted it to the windows folder and over writ the old one. Soft reset the phone and cant really tell any difference in the the volumes. Now you say this is supposed to change all volumes and not just the earpiece volume right?
"All Volume"
I'm a little skeptical here. Will "All Volume" affect the G Sensor activated auto lower ring volume when phone is pick up that is working now.
Take a look at this:
http://forum.xda-developers.com/showthread.php?p=4748528
sultan.of.swing said:
Im not sure what I am doing wrong. I copied the new file and pasted it to the windows folder and over writ the old one. Soft reset the phone and cant really tell any difference in the the volumes. Now you say this is supposed to change all volumes and not just the earpiece volume right?
Click to expand...
Click to collapse
There's definitely a difference on my phone. Speaker phone and ear piece volumes increase, although I do not think it affects bluetooth.
I've attached the really loud one if you want to try it. You will most certainly hear the difference but I do not use this one because it distorts at full volume.
cyberdroxxx said:
I'm a little skeptical here. Will "All Volume" affect the G Sensor activated auto lower ring volume when phone is pick up that is working now.
Click to expand...
Click to collapse
Volume reduction on pickup will still function (may be slightly louder than it was originally, but it will still reduce the volume.)
So, it seems I have finally found out how to adjust the microphone volume on the phone.
I have posted the instructions on my blog. If you try the solution it please respond if it works or not.
This might be veey interesting. I changed 88 to 100 but will only be able to talk to someone tomorrow.
From personal experience both sgs ans sgs2 have low treble input sent to peer. Ots annoying.
Posted from Galaxy S II
tried, we will see...
Interesting, there's an option for speaker receive volume too...
I tried it but it didn't work on audio recording (Hi-Q MP3 Recorder).
There is some way to adjust mic volume of voice recording?, My old SGS recordings were a lot louder than on my new SGSII.
Great thank you so much for the post. It helped me out.
hpe said:
So, it seems I have finally found out how to adjust the microphone volume on the phone.
I have posted the instructions on my blog. If you try the solution it please respond if it works or not.
Click to expand...
Click to collapse
MY SGS2 DOES NOT HAVE THIS VOLUME ISSUE! PEOPLE HEAR ME VERY WELL, SOMETIMES THEY ACTUALLY LOWER THE VOLUME IT IS SO LOUD!!!
Seriously, how much better does it get? I am not in a noise free environment at the moment, how big of a gain does this produce? Does this fix work with the genuine wired headphones?
i thought this fix was temporary only, after a phone reboot the fix resets to default ?
connectandroid said:
i thought this fix was temporary only, after a phone reboot the fix resets to default ?
Click to expand...
Click to collapse
how often do you reboot your phone?
ph00ny said:
how often do you reboot your phone?
Click to expand...
Click to collapse
I must admit...in all the smartphone that i have ever used.....This is the only phone that i have never rebooted except when flashing roms/kernels etc...
I never reboot! I did today, because I wanted to calibrate the battery for the first time and I let it die. So I let it die after 24 hours of use, and then when it turned on it rebooted
I love my phone
hpe said:
So, it seems I have finally found out how to adjust the microphone volume on the phone.
I have posted the instructions on my blog. If you try the solution it please respond if it works or not.
Click to expand...
Click to collapse
It works but sadly as others have already mentioned, after a reboot, you have to re enter the settings, which is the only draw back, and am one of those who reboots the phone on a daily. Is there any way of making this permanent even following a reboot?. I can imagine its probably difficult, but thought I'd ask anywhere. Thanks op.
I'm actually looking for a way to lower the input gain, as my voice comes out distorted on the other side. Any clues? Besides the obvious "Turn 88 into something lower, I tried 70 and didn't work"
I don't know how the values can be saved so that they survive a restart. Personally I only restart my phone when it runs out of battery, or if I've done flashing that requries a reboot. If I need to disconnect from the real world airplane mode is used.
So, has anyone had any luck using this method? Seems to work for me.
eitama said:
I'm actually looking for a way to lower the input gain, as my voice comes out distorted on the other side. Any clues? Besides the obvious "Turn 88 into something lower, I tried 70 and didn't work"
Click to expand...
Click to collapse
That's quite the opposite problem Other than what you tried I have no idea. Sounds like a faulty device?
hpe said:
I don't know how the values can be saved so that they survive a restart. Personally I only restart my phone when it runs out of battery, or if I've done flashing that requries a reboot. If I need to disconnect from the real world airplane mode is used.
So, has anyone had any luck using this method? Seems to work for me.
That's quite the opposite problem Other than what you tried I have no idea. Sounds like a faulty device?
Click to expand...
Click to collapse
Actually, I tried 20 yesterday, and it did solve my problem!
Now sound is crisp and undistorted!
The question is,
1. How to make it stick reboot.
2. What do the rest of the volumes do? Vol0_1 0_2 0_3 etc, you suggested to edit number 5. Why specifically that one?
1. Still a mystery
2. My guess is that there are certain levels of output, and that all of them should be adjusted according to the other to have a linear line. The fact that I wrote that only 5 should be edited was simply because that worked for me.
First, great thanks hpe !!
I got my phone 2 days ago and got same problem.
ppl could not hear me well.
I tried your solution, hope it will help (tried 1-2 calls and seems ok).
I have noticed also that when you talk you should be
stable with your hand and your face , I mean,
it should be with fix distance between the mouth and phone, not important the distance but it should be stable during the call, if not the AGC comes up and down and the other side can't hear you well...
About save setting,
Maybe there is ini file or something (rooted phone) that can be changed to keep value after reboot, I have noticed in the 2 days I have the phone that I had to reboot phone after install application to get it works well.
I've follow the hpe solution but i still have volume problem
My specific problem is:
On Normal Mic call > very low volume... on my SGS2 with android 2.3.3
But with Speaker call > clear (no problem)
Very strange!! I can't be able to solve this problem.
I'd like to precise that with other voip app like bria or "csip simple" i have no problem, mic volume is perfect..
massimilianonball said:
I've follow the hpe solution but i still have volume problem
My specific problem is:
On Normal Mic call > very low volume... on my SGS2 with android 2.3.3
But with Speaker call > clear (no problem)
Very strange!! I can't be able to solve this problem.
I'd like to precise that with other voip app like bria or "csip simple" i have no problem, mic volume is perfect..
Click to expand...
Click to collapse
Speaker call uses different mic settings (since you've a higher distance between your mouth and the mic while using speaker), so it might just the "normal mic call" volume setting which fails.
I have understand and many thanks for your reply but it's strange that those settings works perfectly with the other voip applications..