Database Users

AT&T A.30.07 ROM and Volume on phone

So, I'm experiencing what everybody else is with this ROM. That initial volume level starts out soft and gradually increases to the max that I have it set to. Some have stated they like this and that's fine. But, I HATE it :evil: . I can never hear my phone ring anymore if it's in my pocket. Has anybody found a possible registry key or setting somewhere to turn this off?
And if any AT&T folks are listening.. I'd like a setting in the volume area to turn this off or on.

Phone Profile
Have you check under phone profiles... Ascending Ring change to Standard Ring
Dustoff

I don't have a phone profile, or i should say i don't see any where for that option. In the phone settings area the Ring Type is set for Ring. There is an option for "Increasing Ring" but that's even worse than it is already. I don't think this is what I'm looking for.

Since the WM2003 upgrade on my SX56, 've noticed issues with the speakerphone volume. I can barely hear it in fact. Any thoughts on this one?

Fiddled around with the volume setting, moved it up and down, and the now the volume issue seems resolved. Can't say for sure if that's what resolved it, but it's fine now.

I'm experiencing the same problem with the AT&T rom.. I'm going to take a look around in the registry later on... before I go installing any apps

Well I have taken a look @ the processes running and can't see anything obvious that would be doing the volume thing..
So I have had a poke about in the registry and have found a section with sound profiles and it has an attenuation property, I have tried adjusting this, and deleting it but still no good
Also there is an entry in the registry called Hack and mentioned Vol in the string... but it didn't make any difference when I deleted that either :roll:
If anyone thats a bit more acomplished than myself with the PPC Phone could take a look and find a solution to this, i'm sure many users would appreciated it

Has anyone figured out how to make the volume level constant yet?

Any solutions to get the volume working well on A.30.09 ENG yet?

Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.

valheru said:
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
Click to expand...
Click to collapse
Another thing try ur Reminder set an Alarm you'll notice that you cannot change the Alarm1 ringtone thus the sound stays low ..I tried many things in the registry and no luck as well I wish would some1 help us to resolve this Issue, but!! I made contacts with att's support ,I told them about this problem thus I'm not the only one who's experiencing this, lots of ppl sees this ennoying , I hope they would help here...

SPV M500 Phone Problems

Hi chaps,
I have a SPV M500 but for some reason it is very quiet when on the phone. In a busy street I can barely hear what the other person is saying. I have put the volume on maximum but still very quiet. Is there anyway I can make it louder?
Also, I can't figure out why the 4 buttons surrounding the cursor button locks from time to time preventing me making calls for no apparent reason but I can still use the cursor and the touch screen. This usually occurs after I've synchronised my phone or I have left it for a while.
Any ideas?
Cheers

you might want to post this in the Magician forum since that is what the m500 is. (its a bit more busy in there)

volume slider
Just slide this button up during a call. You should here the volume going up
edit/don't know why image doesn't show, but click it and it does

Thanks I know about the slider, it is on maximum but it is still very quiet... I have no idea why.
Sorry moderators, can you please move this to the Magician section please!

thanks saldous.
always best to try the simple things first. What's it like on speakephone (hold down the (green)answer key).
Was it loud before? Tired a soft reset

furby said:
thanks saldous.
always best to try the simple things first. What's it like on speakephone (hold down the (green)answer key).
Was it loud before? Tired a soft reset
Click to expand...
Click to collapse
Speaker phone works fine. Thanks I didn't know it is activated by holding down the green button!
I've only had the phone for a week, its always been like this but just wondered if anyone knew how I could tweak it to make it slightly louder.
Would a soft reset wipe the memory etc?

soft reset doesn't wipe the memory; it's like rebooting windows.
Hard reset will wipe all memory, like formatting your harddrive (although windows is still there, but "reset" to factory settings)
Are you turning up both sliders on the volume control. There's one for windows and one for the phone.
There aren't really any tweaks to increase sound volume, but it's not very loud to begin with.
V

earpiece problem
also im using orange spv M500....it has that fault mate...the problem is with the speaker...thats too week so itz hardware issue cant help..
But still u can do some registry tricks...
install resco explorer to do it...
go to registry editor
find...-HK curr user-controlpanel-sound categeries-Incall-init volume set to 15

Low Speaker Volume

Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?

onurd said:
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
Click to expand...
Click to collapse
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?

anonimo said:
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
Click to expand...
Click to collapse
I have the exact same problem. When I am in a public place and when there is some noise around, I hardly hear the person I am speaking to. Even when I turn the wheel on the left to maximum
I have spent a lot of time looking for a solution but I have just seen that for some qtek devices, there is the key [HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN] with values EARPHONE_UPLINK_VOLUME and RECEIVE_UPLINK_VOLUME, that allow to modify the max output level of the speaker. But I didn't find that key in the trinity

Even if I turn the scroll wheel all the way up, the volume is too low.
The audiogain registry key (although it doesn't exist in trinity's registry) is actually to improve the sound quality of the microphone and not the volume of the phone.
When I first make a call, when I hear the first ring, it is actually louder but then from the second ring on, the volume decreases at least by 25%.
Anybody with any ideas?

anyone figured how to increase call volume yet?

I would also appreciate a solution to improve the Speakerphone volume.

I would appreciate any fix to increase the volume of anything!
The included stereo headphones are completely useless! My god, why did they even put a volume dial on the headphones? I can barely hear anything with this crap phone...
A pity considering every other features works just perfectly.

ive got the same problem, before the bass fix, the volume was high but with a really unstable and bad sound... after the fix, there is kind of better sound but in phone calls the volume is low.. i really start hating this device......

I've been using my new p3600 for two weeks now, and this low speaker volume issue is killing me. I've been a Noia user for years, and the difference in sound quality during normal calls is simply unacceptable. The p3600 has so many awesome capabilities for such a small phone, but when it comes to the most basic function, I'm quite disappointed with.
I would also appreciate a fix to improve the quality of the speaker.
Cheers

i can say that this is not the only problem, there are so many others that i stopped thinking of this one... im going for a final hard reset now.. im really tired...im sick of it.....

Someone has an idea ?

Has anyone found away to increase the incall volume yet ???

Someone posted this registry hack elsewhere (use at your own risk of course)
1. HKEY_CURRENT_USER
2. ControlPanel
3. SoundCategories
4. InCall
5. InitVol
6. Change the DWORD value to 6 (Default = 2)
7. Click Done
Wait approx 10-15 seconds before testing.
PS. If the registry key or value doesn't exist, you can always try creating it.

Has anyone tried this??
What was the outcome??

ausi said:
Has anyone tried this??
What was the outcome??
Click to expand...
Click to collapse
Yes i tried it and it never worked for me ...

i can also confirm that this does NOT work on the trinity, anyone else have any bright ideas...

Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???

schizo said:
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
Click to expand...
Click to collapse
hi this link doenst work "include this patched driver in newly cooked ROM"

zohaer21 said:
hi this link doenst work "include this patched driver in newly cooked ROM"
Click to expand...
Click to collapse
Sorry zohaer... my post does not contain hyperlink.
I just underlined it to stress up some points...

push!
also need a solution

Cab to lower the incall volume?

Would anybody please try to make a cab that would somehow lower the incall volume?
I know there are many of us that "hate" our Leo for damaging our ears! Please help us fix that!
Don't point us to HTC support! Have been trying that for about 7 weeks now, with no real result but pathetic fixes.
regards,
GG

First off I will be moving this thread to general when I have finished responding.
Secondly, can you explain your problem a little better please. If you really mean turn the in-call volume down, ie NOT when the phone is in speakerphone mode, you can do this now by simply holding the down volume key while in the call to make it happen.
If this is not what you mean then have another go at explaining yourself.
Cheers
WB

unless i've read this wrong i think you win the worst question of the year award...lol
as above, just turn down the volume.

sorry to but in here and sorry if its a noob question but i've had the same problem...
when i answer a call the volume is so loud everyone around me can hear the call!
now i've tried clicking the side key to lower the volume but it goes to the black screen with the bar and silent and vibrate on there and its only on 6%
I'd want to say (another noob comment) that i have sometimes found the sound is irregular, sometimes its low but normally very loud... isnt there meant to be a function where you place the phone next to you're ear and it lowers the volume so its not damaging you're ears?

I think that question is valid. You can only turn it down so much. All sounds on HD2 are too loud; be it call, music, speakerphone, ringing. You can hear speaker breaking at 50%, and your ears bleeding at more. Distortion is present even at low values.
So, I'm with OP, but I want to expand request: how to lower ALL volume on HD2? In other words, instead 10-100%, I want 1-10%.

maybe i just havent noticed due to being pretty much death

the question should be: how to reduce the default incall vol, is that right?

The earpiece and handsfree produce a lot of noise, I agree. there are a few threads already about volume too high and poor sound quality i.e. distorted audio. with earpiece calls try raising the volume first to just above minimum, then keep lowering the volume even when level indicator has reached minimum to reduce call volume further.

Don't be quick to judfe please!
wacky.banana said:
First off I will be moving this thread to general when I have finished responding.
Secondly, can you explain your problem a little better please. If you really mean turn the in-call volume down, ie NOT when the phone is in speakerphone mode, you can do this now by simply holding the down volume key while in the call to make it happen.
If this is not what you mean then have another go at explaining yourself.
Cheers
WB
Click to expand...
Click to collapse
Maybe I haven't explain myself well enough. Why do you and all the smart asses that gave all that cheap advice think that just because we're not mods or developers we're dumb.
It is a well known problem with the HD2. Even with the volume all the way down (while talking on the phone) it's still very loud!!!! Very Very Loud! And I don't mean that trough speaker phone but through the earpiece!
Does this justify my frustration and my legitimate question?
If you can't say nothing good say nothing at all!
thank you!

I know of those threads!
htc12345 said:
The earpiece and handsfree produce a lot of noise, I agree. there are a few threads already about volume too high and poor sound quality i.e. distorted audio. with earpiece calls try raising the volume first to just above minimum, then keep lowering the volume even when level indicator has reached minimum to reduce call volume further.
Click to expand...
Click to collapse
trust me I know of all those threads and I follow them daily but no real solution so far!
G

Not funny!
paulking said:
unless i've read this wrong i think you win the worst question of the year award...lol
as above, just turn down the volume.
Click to expand...
Click to collapse
If you think that making fun of someone else's problem is funny think again!
We do expect more of the senior members here but then again maybe we're wrong in doing so!
why do you assume I don't know how to use the volume buttons?
It's a well known fact that hd2 is very loud while incall and even with the volume all the way down is still too loud!!!
G

its loud indeed,
I and I would be personally intrested in lowering the top volume, so highest settings are more reasonable, and stepping down from that actually make it lower sensibly

I had this issue with the call volume being too loud even when turned down, and sometimes it would distort/crackle with certain words/letters. I used the following registry tweak and it's worked absolutely perfectly for me. I've used it on the old ROM and the latest.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
See if that helps

snerkler said:
I had this issue with the call volume being too loud even when turned down, and sometimes it would distort/crackle with certain words/letters. I used the following registry tweak and it's worked absolutely perfectly for me. I've used it on the old ROM and the latest.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
See if that helps
Click to expand...
Click to collapse
I tried that weeks ago and it did absolutely nothing.

sorry to prove you wrong!
snerkler said:
I had this issue with the call volume being too loud even when turned down, and sometimes it would distort/crackle with certain words/letters. I used the following registry tweak and it's worked absolutely perfectly for me. I've used it on the old ROM and the latest.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
See if that helps
Click to expand...
Click to collapse
I've done that too but that volume is for incall notifications only. You can verify that by having someone call you while you're engaged in a call. You will barely hear them if you turn the volume to "2".
thank for trying though!
regards,
G

I think the members want you to be more specific. Identify what ROM & radio you are using and what you have done so far to resolve the problem.

tried 'em all
romac said:
I think the members want you to be more specific. Identify what ROM & radio you are using and what you have done so far to resolve the problem.
Click to expand...
Click to collapse
I've tried all official roms!!! Also tried a lot of the cocked ones with pretty much same result, very little difference whatsoever!
G

sunking101 said:
I tried that weeks ago and it did absolutely nothing.
Click to expand...
Click to collapse
I wonder why it works for some and not others?

snerkler said:
I wonder why it works for some and not others?
Click to expand...
Click to collapse
On drugs trials, lots of people claim the placebo works...

placebo works too... for a few sad short seconds...
sunking101 said:
On drugs trials, lots of people claim the placebo works...
Click to expand...
Click to collapse
yep!
Long live Placebo! But when reality checks in changes everything!
G

[Q] Nexus 4 in-call volume problem

I am having problems with the in-call volume of my Nexus 4. Say I have it at 4/5, it will remain at this for a while, however, it does not maintain this setting. When I answer a subsequent phone call, the in-call volume will have reset itself to 2/5. It is quite annoying answering a phone call, not hearing the person on the other side and then having to increase the volume again. I actually returned my 1st Nexus 4, however, this problem is now occurring on my replacement phone as well. Would anyone have any suggestions as to what might be causing this problem before I contact Google again. I have not made any adjustments to the OS of the Nexus 4. Thanks for any help!

Jersey1 said:
I am having problems with the in-call volume of my Nexus 4. Say I have it at 4/5, it will remain at this for a while, however, it does not maintain this setting. When I answer a subsequent phone call, the in-call volume will have reset itself to 2/5. It is quite annoying answering a phone call, not hearing the person on the other side and then having to increase the volume again. I actually returned my 1st Nexus 4, however, this problem is now occurring on my replacement phone as well. Would anyone have any suggestions as to what might be causing this problem before I contact Google again. I have not made any adjustments to the OS of the Nexus 4. Thanks for any help!
Click to expand...
Click to collapse
I have Volume + installed from Google Play and it increases the volume considerably from the speaker, through bluetooth and headsets. If you try it go to settings/sounds/sound effects and choose Volume + instead of Music Fx. I`am using the paid version and it works great for me.

gee2012 said:
I have Volume + installed from Google Play and it increases the volume considerably from the speaker, through bluetooth and headsets. If you try it go to settings/sounds/sound effects and choose Volume + instead of Music Fx. I`am using the paid version and it works great for me.
Click to expand...
Click to collapse
Thanks for your reply. Actual loudness of the phone is not a problem, when the highest in-call volume setting is maintained. However, the phone will randomly reset itself to the 2/5 setting. Over the weekend, I give the Volume + app a try. It has an individual setting for in-call volume, however, the problem still occurs. Do you think the problem is software related and therefore potentially could be rectified by the next major update to be released? I'am worried that I may have to try and return another phone to Google!

help!
Jersey1 said:
Thanks for your reply. Actual loudness of the phone is not a problem, when the highest in-call volume setting is maintained. However, the phone will randomly reset itself to the 2/5 setting. Over the weekend, I give the Volume + app a try. It has an individual setting for in-call volume, however, the problem still occurs. Do you think the problem is software related and therefore potentially could be rectified by the next major update to be released? I'am worried that I may have to try and return another phone to Google!
Click to expand...
Click to collapse
Did you ever find the solution? I just got a Nexus 4 and have the same issue. I've been searching like crazy for a solution!

changogger said:
Did you ever find the solution? I just got a Nexus 4 and have the same issue. I've been searching like crazy for a solution!
Click to expand...
Click to collapse
I forgot to say that even though is the same issue, in my case is the other way around. The volume resets to 5/5 even though I change it to 2/5 during a call. The 2/5 setting seems to last only some time but surely after a few hours, when I make or receive another phone call the volume has gone up to 5/5.

I have the same issue. The volume is always to the max. During the call I lower it, because it is too loud at the maximum, but during the next call, the volume is at maximum again. I tried several applications that adjust in-call volume, but it had no effect.

nemilose said:
I have the same issue. The volume is always to the max. During the call I lower it, because it is too loud at the maximum, but during the next call, the volume is at maximum again. I tried several applications that adjust in-call volume, but it had no effect.
Click to expand...
Click to collapse
I believe we might have an application installed that's resetting the volume, would you mind sharing the applications you have via private message and then we can check which we have in common and go from there? If you agree I'll send you mine as well.

After several factory resets I finally found out what was the problem. Automatic Call Recorder has an option named Maximize recording volume (or something like that). When I turned off this, the problem was solved.