Hi chaps,
I have a SPV M500 but for some reason it is very quiet when on the phone. In a busy street I can barely hear what the other person is saying. I have put the volume on maximum but still very quiet. Is there anyway I can make it louder?
Also, I can't figure out why the 4 buttons surrounding the cursor button locks from time to time preventing me making calls for no apparent reason but I can still use the cursor and the touch screen. This usually occurs after I've synchronised my phone or I have left it for a while.
Any ideas?
Cheers
you might want to post this in the Magician forum since that is what the m500 is. (its a bit more busy in there)
volume slider
Just slide this button up during a call. You should here the volume going up
edit/don't know why image doesn't show, but click it and it does
Thanks I know about the slider, it is on maximum but it is still very quiet... I have no idea why.
Sorry moderators, can you please move this to the Magician section please!
thanks saldous.
always best to try the simple things first. What's it like on speakephone (hold down the (green)answer key).
Was it loud before? Tired a soft reset
furby said:
thanks saldous.
always best to try the simple things first. What's it like on speakephone (hold down the (green)answer key).
Was it loud before? Tired a soft reset
Click to expand...
Click to collapse
Speaker phone works fine. Thanks I didn't know it is activated by holding down the green button!
I've only had the phone for a week, its always been like this but just wondered if anyone knew how I could tweak it to make it slightly louder.
Would a soft reset wipe the memory etc?
soft reset doesn't wipe the memory; it's like rebooting windows.
Hard reset will wipe all memory, like formatting your harddrive (although windows is still there, but "reset" to factory settings)
Are you turning up both sliders on the volume control. There's one for windows and one for the phone.
There aren't really any tweaks to increase sound volume, but it's not very loud to begin with.
V
earpiece problem
also im using orange spv M500....it has that fault mate...the problem is with the speaker...thats too week so itz hardware issue cant help..
But still u can do some registry tricks...
install resco explorer to do it...
go to registry editor
find...-HK curr user-controlpanel-sound categeries-Incall-init volume set to 15
Related
So, I'm experiencing what everybody else is with this ROM. That initial volume level starts out soft and gradually increases to the max that I have it set to. Some have stated they like this and that's fine. But, I HATE it :evil: . I can never hear my phone ring anymore if it's in my pocket. Has anybody found a possible registry key or setting somewhere to turn this off?
And if any AT&T folks are listening.. I'd like a setting in the volume area to turn this off or on.
Phone Profile
Have you check under phone profiles... Ascending Ring change to Standard Ring
Dustoff
I don't have a phone profile, or i should say i don't see any where for that option. In the phone settings area the Ring Type is set for Ring. There is an option for "Increasing Ring" but that's even worse than it is already. I don't think this is what I'm looking for.
Since the WM2003 upgrade on my SX56, 've noticed issues with the speakerphone volume. I can barely hear it in fact. Any thoughts on this one?
Fiddled around with the volume setting, moved it up and down, and the now the volume issue seems resolved. Can't say for sure if that's what resolved it, but it's fine now.
I'm experiencing the same problem with the AT&T rom.. I'm going to take a look around in the registry later on... before I go installing any apps
Well I have taken a look @ the processes running and can't see anything obvious that would be doing the volume thing..
So I have had a poke about in the registry and have found a section with sound profiles and it has an attenuation property, I have tried adjusting this, and deleting it but still no good
Also there is an entry in the registry called Hack and mentioned Vol in the string... but it didn't make any difference when I deleted that either :roll:
If anyone thats a bit more acomplished than myself with the PPC Phone could take a look and find a solution to this, i'm sure many users would appreciated it
Has anyone figured out how to make the volume level constant yet?
Any solutions to get the volume working well on A.30.09 ENG yet?
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
valheru said:
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
Click to expand...
Click to collapse
Another thing try ur Reminder set an Alarm you'll notice that you cannot change the Alarm1 ringtone thus the sound stays low ..I tried many things in the registry and no luck as well I wish would some1 help us to resolve this Issue, but!! I made contacts with att's support ,I told them about this problem thus I'm not the only one who's experiencing this, lots of ppl sees this ennoying , I hope they would help here...
anyone know anything about this?
any software?
thanks.
phm regedit.
I forgot the link, search with google.
Download the .cab file and put on you PPC. Tap on it and everything is going well.
Best regards,
Arto
maybe i didn't make my self clear.
i have a problem with SPEAKER PHONE.
i can bearly hear it! the same volume as regular earphone!
i was wondering how can i fix it?
Yes,
The quality of speaker phone on O2 XDA II mini is not as good as my old Nokia handphone.
But, you can try to edit the registry with PHM Regedit. It does help in sound quality (but not perfect). I forgot which registry need to edit. But you can find on this forum threat.
Make sure you also set the speaker phone mode (press phone button, green one, for 2 seconds).
Make sure the volume is high enought.
Hope can help.
Best regards,
Arto
thanks for your help, But i couldnt find the Tweak needed in the registry....
i need help, i press the green button twice, it says "Speakerphone on"
But: it is very very weak...
can anyone help?
i'm sure i'm not the only one with this problem.
Hello,
I was looking for same thing as the speaker volume is very low, please if any body know what registry value will control the speaker volume it would realy be great.
Thanx.
Artosoft said:
Yes,
The quality of speaker phone on O2 XDA II mini is not as good as my old Nokia handphone.
But, you can try to edit the registry with PHM Regedit. It does help in sound quality (but not perfect). I forgot which registry need to edit. But you can find on this forum threat.
Make sure you also set the speaker phone mode (press phone button, green one, for 2 seconds).
Make sure the volume is high enought.
Hope can help.
Best regards,
Arto
Click to expand...
Click to collapse
Dude what are you talking about. Nothing you have said makes any sense. The only know registry edit for audio is the one related to the normal earpiece - not the speakerphone. And that one is not reallt any use either.
The bad speakerphone on the JAM is known problem. And there is no soultion so far.
Try this link:
http://forum.xda-developers.com/viewtopic.php?t=17311
There is a threat about what I do on my O2 XDA II mini. It sound good on my mini for talking like normal handphone.
For Speakerphone, I give up. It is not loud.
Best regards,
Arto
assasins said:
i'm sure i'm not the only one with this problem.
Click to expand...
Click to collapse
The good news is that you're not the only one indeed - I have the same problem. The speakerphone mode is exactly as loud as the normal mode. The bad news is that I also do not have a simple solution.
In another forum, several people reported the same problem after they upgraded to the Radio Stack 1.05 and restored their previously backed-up data. A hard reset (some say: re-applying the radio stack upgrade) seemed to cure the problem for them. However, restoring a backup after that made it re-appear.
I did the upgrade, but not a restore. And now I also have the problem, so I guess it's some software overwriting some setting. Unfortunately I have no idea which. :-( Before the update the volume was a lot better.
Will try a hard reset tomorrow, and see if I can find out anything.
Cheers,
Daniel
"fixed"
ok, this problem was resolved after a HR, but!
as soon as i try to do SPRITE RESTORE for the new BACKUP (which i made after the HR) the volume comes back down!!
so!
no usefull fix..:-(
Hi,
i have a serial problem. I can't hear the ringtone at all. Everything else is working.
If i try to switch the volume slider it seems that the volumes will be increased. but nothing happens. If i open the volume slider again the volume is set to 0 again. I don't understand why. I have a short time ago done a complete hard reset and installed a German T-Mobile image from the ftp area. And i believe the device was fallen down so there was a problem at all with the internal small speaker which is now working again. I hope i don't forget anything about the device and what i have done in the past.
And Yes i have done a search and i found something but not for the Magician so it wa snot helpful.
Thanks
figured it out
I found a thread in the froum which i not put attention on. It was a problem with the newest T-Online German Image.
I switched back to an older one now it works again.
Hi folks,
I seem to have a problem with my sound - on my o2 XDA-mini-s.
The volume is full on both sliders [accessed from the slider on the left hand side. but I cannot hear my ringtone or anything when I access the menu.
Plugging into the the earphones socket I can hear everything through the headphones. This has happened previously and a soft reset always sorts it - not this time - any ideas folks?
awaterhouse said:
Hi folks,
I seem to have a problem with my sound - on my o2 XDA-mini-s.
The volume is full on both sliders [accessed from the slider on the left hand side. but I cannot hear my ringtone or anything when I access the menu.
Plugging into the the earphones socket I can hear everything through the headphones. This has happened previously and a soft reset always sorts it - not this time - any ideas folks?
Click to expand...
Click to collapse
read http://forum.xda-developers.com/showthread.php?t=282745
Try this if you cannot hear the ringer or ringtone preview. Go directly to step 3 on the first post. You may need a registry editor. I use TotalCommander.
http://forum.xda-developers.com/showthread.php?t=258109&highlight=volume+solved
hi guys,
i still have a list of hd2 issue yet to be solve, can any kind soul reply with solutions here in sequence.
1) when i am on my wired earpiece, the volume is so max that it can be unbearable at times. i know i have the volume rocker to up and down the volume to suit my hearing but then if i lower my volume it also carried the low volume to the connected calls. is there a workaround for this?
2)when i am on a connected call, i can hear hissing sound which is so irritating and the other party on my line ask if i'm on speakermode. workaround? volume is soft as well by the way.
3)phone hangs alot and i have to remove the cover and battery, the usual standard procedure. i know it could be manila.exe accumulating resources so high that it can be disruptive. the only solution i have now is restart at periodic time to maintain phone usefulness.
4)Weather not updating.
5)Flash player on HD2 if there is.
i cant think of anymore now.. maybe later..
sometimes when i felt my phone was stable for a few days it hangs unexpectedly. but there so much tweaking that needs to be done on this phone that i have to take a risk bricking the phone. there is really endless tweaking to this phone. imagine if i were to hardreset and reinstall all tweaks and stuffs .. it will be a nightmare when i have gone so far in tweaking it.
thats WM..
kelvinchewsg said:
hi guys,
i still have a list of hd2 issue yet to be solve, can any kind soul reply with solutions here in sequence.
1) when i am on my wired earpiece, the volume is so max that it can be unbearable at times. i know i have the volume rocker to up and down the volume to suit my hearing but then if i lower my volume it also carried the low volume to the connected calls. is there a workaround for this?
Click to expand...
Click to collapse
try this in attachements it will allow two control system volume and ring volume separetly just click volume bottom and see
hoss_n2,
thanks bro, appreciate this little cab... i have install it and i must say i have gain another level to a perfect tweak. Thanks again bro..
kelvinchewsg said:
hoss_n2,
thanks bro, appreciate this little cab... i have install it and i must say i have gain another level to a perfect tweak. Thanks again bro..
Click to expand...
Click to collapse
at your service
hoss_n2,
one question here, when im on Ring config, i press the volume rocker up and down, i get almost the same sound level whether im on on max vol or min vol
i do hear a difference on the System config when i up/down the volume..
do u have this issue?
kelvinchewsg said:
hoss_n2,
one question here, when im on Ring config, i press the volume rocker up and down, i get almost the same sound level whether im on on max vol or min vol
i do hear a difference on the System config when i up/down the volume..
do u have this issue?
Click to expand...
Click to collapse
soft reset and see again as i don't have this problem. you must adjust the ring not during the phone is ringing but before it tell me if it works
kelvinchewsg said:
hi guys,
i still have a list of hd2 issue yet to be solve, can any kind soul reply with solutions here in sequence.
1) when i am on my wired earpiece, the volume is so max that it can be unbearable at times. i know i have the volume rocker to up and down the volume to suit my hearing but then if i lower my volume it also carried the low volume to the connected calls. is there a workaround for this?
2)when i am on a connected call, i can hear hissing sound which is so irritating and the other party on my line ask if i'm on speakermode. workaround? volume is soft as well by the way.
3)phone hangs alot and i have to remove the cover and battery, the usual standard procedure. i know it could be manila.exe accumulating resources so high that it can be disruptive. the only solution i have now is restart at periodic time to maintain phone usefulness.
4)Weather not updating.
5)Flash player on HD2 if there is.
i cant think of anymore now.. maybe later..
sometimes when i felt my phone was stable for a few days it hangs unexpectedly. but there so much tweaking that needs to be done on this phone that i have to take a risk bricking the phone. there is really endless tweaking to this phone. imagine if i were to hardreset and reinstall all tweaks and stuffs .. it will be a nightmare when i have gone so far in tweaking it.
thats WM..
Click to expand...
Click to collapse
You better read this thread
http://forum.xda-developers.com/showthread.php?t=588925
Its a comun issue and so far no one has manage to fix it, some units are defective, if you can get a new phone.
I have it and been doing all fix and nothing i even here my own voice on echo very annoying
SOLRAC13 said:
You better read this thread
http://forum.xda-developers.com/showthread.php?t=588925
Its a comun issue and so far no one has manage to fix it, some units are defective, if you can get a new phone.
I have it and been doing all fix and nothing i even here my own voice on echo very annoying
Click to expand...
Click to collapse
no itis service issue i had this but when i changed the service like from vodafone to mobinil this problem disappeared
http://www.youtube.com/watch?v=yygZ3X__yIo
hi Guys,
i posted a video, mind taking a look here
yes i did a soft reset everytime i install a cab..
http://www.youtube.com/watch?v=yygZ3X__yIo
any more solutions?
kelvinchewsg said:
any more solutions?
Click to expand...
Click to collapse
the video is not showing the ring control problem