Database Users

Not bricked but pretty much there.

So here are firstly the details
-------------------------------
SAPPHIRE PVT 32A ENG S-ON H
HBOOT -1.33.2010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:27:03
-------------------------------
As you can see above I have the engineering SPL but I am unable to flash via fastboot gives me the not verified error. I previously was stuck in a reboot loop which I finally got out by creating a goldcard and using 2.53.707.2_-_sappimg.zip. I am able to use the phone but thats about it. There is no access to sd card I have tried numerous cards and they don't work.
From Inside the Phone:
-------------------------------
Firmware version: 1.5
Baseband version: 62.525.20.18U_3.22.20.17
Kernel version: 2.6.27-cb85e129
[email protected] #3
Build Number: 2.53.707.2 146733 CL#37318 test-keys
---------------------------------
I would like to thank anyone in advance for their help. I have searched and been searching the forums for 2 days non-stop usually its stated that you need an Engineering SPL (which I guess I am already using) can't downgrade because I have no access to sdcard either. Please help........

Try going here and grabbing the sappimg from there, load it onto your goldcard, and flash it from hboot the same way you did the first time. There's another guy I was working with on here that tried to use the same engineering SPL and it didn't work, but I don't know if he ever tried that one. The sappimg I'm referring you too is the same one I used when I rooted my phone. Give it a shot and let us know back here.

DonJuan692006 said:
Try going here and grabbing the sappimg from there, load it onto your goldcard, and flash it from hboot the same way you did the first time. There's another guy I was working with on here that tried to use the same engineering SPL and it didn't work, but I don't know if he ever tried that one. The sappimg I'm referring you too is the same one I used when I rooted my phone. Give it a shot and let us know back here.
Click to expand...
Click to collapse
Thanks a lot I am going to grab it right now. Will update in a bit.
*UPDATE:*
No difference same as before cannot access sdcard and same SPL & Radio. No changes... :-(

Im a noob but I just recovered myself from a semi-brick.. What i did was to load the hero recovery back onto the phone via fast boot. flash hboot 1.76.2007 via recovery. Boot back into fastboot.
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
fastboot flash hboot hboot-1.33.2005.img
fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img
fastboot erase system -w
fastboot reboot-bootloader
check that you are running hboot 1.33.2005 radio 3.22.20.17
then flash your rom..
worked for me, maybe it will work for you. good luck

Alien-X said:
Im a noob but I just recovered myself from a semi-brick.. What i did was to load the hero recovery back onto the phone via fast boot. flash hboot 1.76.2007 via recovery. Boot back into fastboot.
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
fastboot flash hboot hboot-1.33.2005.img
fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img
fastboot erase system -w
fastboot reboot-bootloader
check that you are running hboot 1.33.2005 radio 3.22.20.17
then flash your rom..
worked for me, maybe it will work for you. good luck
Click to expand...
Click to collapse
Thanks for your help but as soon as I try loading I get the verification fails
D:\AndroidSDK\tools>fastboot flash flash hboot-1.76.2007.img
sending 'flash' (512 KB)... OKAY [ 0.493s]
writing 'flash'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.648s
Click to expand...
Click to collapse
Any other ideas? Appreciate all the help!

flash 1.76.2007 via recovery, not fastboot.
Link for Hboot 1.76.2007 ZIP
http://www.4shared.com/file/211145376/3da88b40/update-hboot-1762007-signed.html
another reason it might not be working is becuz your doing 'fastboot flash flash"
which if correct it should be 'fastboot flash hboot'

Did this solve your issue?
Sent from my HTC Magic using XDA App

Alien-X said:
Did this solve your issue?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Sorry wasn't around. Thank you for responding.
Your right I was not using HBOOT but it didn't make a difference I still get the verification error using fastboot.
As you suggested I should try updating using recovery but like I said the SDcard is not detected. I used the "fastboot -c board_sapphire.disable_sdcard=0 boot recovery...*" and it detected the sd card when I try to update the using the zip file it gets stuck at Opening update package....
Any other options?

[Q] Can i unbrick my magic 32a?

i think i brick my phone...how when i power on,it only keeps on boot into htc magic...so is there any think i can do or?

Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?

mumilover said:
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
Click to expand...
Click to collapse
i dont have a fasboot & recovery access...
i root my phone with universal androot,using rom manager i successfully flash recovery,then i download rom..i kinda like want to look around the rom manager app and i accidentally press ok with the backup & clear cache?the phone start to restart and now i cant turn on my phone
my phone is...
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
its because of the perfected spl right?

From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...

ekie84 said:
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
Click to expand...
Click to collapse
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!

TheBladeofFate said:
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
Click to expand...
Click to collapse
yes it say s-on H

mumilover said:
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
Click to expand...
Click to collapse
when i hold back+power (recovery) & hold menu+power (fastboot) nothing happen...all i can see is the "htc magic"
its ok then...i've email the service centre & their say if they can reflash the rom successfully their will charge me rm80

Similar Issue
Hey Guys and Girls,
This is my first time posting on this site. I have run into a similar issue and have attempted to post on numerous sites without having any luck solving the problem.
The quick version: I ran z4root to root my phone; it said successful. I then installed Rom Manager and switched my recovery to Clockwork (the most recent one). Next I downloaded the latest CM6 from the Rom Manager with GApps. After having unsuccessful attempts at backing up and wiping first, I decided to try installing the Rom without backing up or wiping data. The Rom install worked this time (I got installation successful). However, when the phone rebooted itself, it never got past the Rogers screen. It is now in a constant state of rebooting until I pull the battery.
I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAP50000)
CPLD-12
RADIO-6.35.16.19
Some other info that may help:
-my PC recognizes my phone (I have been trying the Radio Switcher v.GUI 4.1 and it says the phone is connected) but it is not allowing me to flash anything.
-When I try "adb devices" it gives error: no device attached but "fastboot devices" gives me a number.
-I have tried putting "recovery-RA-sapphire-v1.7.0H" on my sdcard, but the HBoot says no image or wrong image
-The Radio Switcher v.GUI 4.1 says my phone is not rooted
-I tried the goldcard method of rooting, but because I can't get the phone to recognize the sdcard, I can't get a proper CID for the goldcard creator
Hopefully I've provided enough info to get some help. I am waiting patiently, but am starting to get sick of the old Sony Ericsson Anything helps!

Run this 2 commands in fastboot and post here the ourput.
Code:
fastboot oem h
fastboot getvar version-main

Here is the info you required.
C:\AndroidSDK\platform-tools>fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOenableqxdm
INFOrtask
OKAY [ 0.009s]
finished. total time: 0.009s
C:\AndroidSDK\platform-tools>fastboot getvar version-main
version-main: 3.54.631.3
finished. total time: 0.001s

run this command to activate the sdcard:
Code:
fastboot oem enableqxdm 1
You have to make a goldcard... if you can't make it using your device, then do it using any other android device.
When you have made the goldcard come back here, and i'll guide through the rest :0)

Done. I made a gold card previously...hopefully it still works. Once it's made into a goldcard, is it always a goldcard?

Actually... re-checking your info - you don't need a goldcard..
No need for sdcard either...
Download this sappimg.zip :
http://rapidshare.com/files/437924840/sappimg.zip
Then run this command from a command prompt:
Code:
fastboot flash zip sappimg.zip
Make sure that the sappimg.img is in the same folder as fastboot.exe
The sappimg.zip is the newest rogers update... the same version as you currently have...
No need for goldcard or anything :0)
if you get any troubles, then post here the outcome of the command prompt..
When all is done, you should be back on stock 2.1...
From there you follow my guide (check my signature) to root and get custom recovery.
Good luck

hi guys,
i got the same problem, here im my country nobody knows how to solve (im from brazil)
when a tryed to updade with sapping file, in the radio part, the screen became dark, then white.
now I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.008 (SAP60000)
CPLD-12
RADIO-3.22.20.17
my PC recognizes my phone but it is not allowing me to flash anything.
When I try "adb devices" it gives error: no device attached but fastboot command works fine.
i have my first goldcard.
this forum is my last hope... if anyone know how to proced, help me pls

I had the same problem as a few of you and after trying everything I eventually decided to try installing SAPPIMG.zip from hboot and it worked fine. Took me a while to find the correct SAPPIMG but you should be able to find it on the forums here. You have to put the SAPPIMG.zip on the root of your SD card from your computer, put it in the phone, boot into fastboot and go into hboot and it'll load the SAPPIMG file. If you have the wrong SAPPIMG it'll usually give you an error when trying to install it'll say someting like update failed or wrong device ID. It took me about 4-5 different SAPPIMG to find the correct one for my phone.

Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s

The phone starts the box with the arrow and then after a few seconds it shutdowns
Dear Mumi,
Dear All Please help me...
my htc magic white before flashed is :
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_ NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:28
Root build RA-sapphire-v1.6.2H
After Flashing and update both of radio and SPL
RUU_Sapphire_HTC_Asia_WWE_3.03.728.4_SEA_release_s igned_NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
At the time My HTC Magic is working, but I can't root and also in the ROM it self missing android market.
then installed Universal androd and working...Last night i just tried to factory reset and The phone starts the box with the arrow and then after a few seconds it shutdowns, any idea to get in fastboot or just make HTC start normally
Thank in advance

cj.smith14 said:
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
Click to expand...
Click to collapse
Hmm... try this:
Code:
fastboot oem rebootRUU
The above will set the device into RUU mode.
Then download the official rogers RUU..
Run it and it should install just fine... no need for goldcard or sdcard..
I hope this will work.

atrix.suhendra said:
....
Click to expand...
Click to collapse
fastlan said:
.....
Click to expand...
Click to collapse
Please start your own thread or else the OP will loose his opportunity to get proper help!
I will try to help where i can :0)

Hey,
I just wanted to say I appreciate all the time you are putting in to helping me. I just did the RUU install, but once it gets to the updating signature part I get:
ERROR [132]: SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.

[Q] MT3G 1.2 -the process android.process.acore has stopped unexpectedly at startup

Hi,
I have a tmobile mytouch 3g 1.2 (3.5mm jack phone). I tried to root my phone and it failed during the SYSTEM---UnZipping process. (it stuck there forever). I then looked at options of unrooting it. When I apply SAPPIMG.zip it says Main Version Older! Update Fail!
Then I reboot the phone in recovery mode (tried to reset to factory settings and then reboot). The phone gives me the below error upon startup. The only thing i can see is an notification bar.
the process android.process.acore has stopped unexpectedly. "FORCE CLOSE"
Please can someone help me how to get my phone working? Appreciate all your help!

If you go to tmobile.com then go to there forum under android development you will see a topic called how to unroot the mytouch. In that topic they have a link for the original sappimg .. download to your zip cars in the root of the card (no folders) then just boot into hboot and apply the sappimg. I have done it many times so I know it works. Then when you go to root your just us the universal androot method. Feel few to pm me i
ent from my HTC Magic using XDA App

Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)

I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.

mumilover said:
Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)
Click to expand...
Click to collapse
I tried the command - fastboot getvar version-main
it just says < waiting for device > and then nothing happens...
also when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...) can this number be used in any manner for anything

housry23 said:
I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.
Click to expand...
Click to collapse
i did not take any nandroid backup ...i got into revovery boot...but whn i did the wipe clean option and reboot i get this error.
to make a gold card i would need to have the USB debugging enabled right? I am not able to go past the error screen (Home does not work, settings does not work )
and when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...)
is there any other way to enable the USB Debugging as I am not able to open settings or even see anything on my phone...?
Would there be any option that's something like doing a System Restore to an earlier date on Windows OS on the computer?
please let me know the next steps...appreciate all of your help...

It's driver related.
Fix the drivers and try again to run the commands.

mumilover said:
It's driver related.
Fix the drivers and try again to run the commands.
Click to expand...
Click to collapse
You mean re-install the USB drivers for mytouch 3g? i tried that but still nothing happens...

Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...

mumilover said:
Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...
Click to expand...
Click to collapse
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?

ganesh.raj.ms said:
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?
Click to expand...
Click to collapse
Hey, i tried the below. can you please let me know if this is correct? and what do i do next?
userdebug-img-14721_1.zip
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: 1.33.0013
Baseband Version.....: 2.22.23.02
Serial Number........: HT03TPB01582
--------------------------------------------
checking product... FAILED
Device product is 'sapphire'.
Update requires 'trout'.
finished. total time: 0.042s
how do i try to rectify the checking product...FAILED???

OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...

mumilover said:
OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...
Click to expand...
Click to collapse
Is it the below that you want?
[FONT=&quot]SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27[/FONT]

Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices

mumilover said:
Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices
Click to expand...
Click to collapse
adb devices does not give me anything...its not working

Does the computer recognise the device?
Maybe it's driver related...
PS: check your pm

[Q] HELP stuck in RUU mode!

I have the sapphire pvt 32a ship s-on G
hboot-1.33.0013 sapp31000
cpld-13
Radio--6.35.16.19
oct. 21 2009, 22:33:27
RUU USB
Has a microchip with a circle and x through it on the bottom.
I am not clear what happened. I had flashed to this radio and had a eng hboot and Couldn't get recovery to work. So I used the flash tool and flashed the old radio the old hboot and the old recovery back on, and it booted into recovery. Still couldn't flash with out new Radio so I flashed back everything, than it wouldn't boot into recovery so I tried to flash back radio and put a stock rom on it, all the sudden it wouldn't flash the radio or anything so I tried to update with and a tmobile ruu and it got stuck at this screen I cant get out of it.
HELP PLEASE!
I

You got radio/spl mismatch....
What version nr do you have?
Code:
fastboot getvar version-main
fastboot oem h

Main version
version-main 2.10.531.4
I ran the other command and got a list of commands?

Good.... i want that list please :0)
Also, do this command:
Code:
fastboot getvar cid
Also, download this:
https://rapidshare.com/files/454052569/2.10.531.4.zip
https://rapidshare.com/files/450996411/special_sappimg.zip
https://rapidshare.com/files/436753940/2.53.707.2_-_sappimg.zip
Also do a GOLDCARD.
I got your PMs.
I'm extremely busy with my bachelor + work + my new baby-daughter.... so expect some reply-delays :0)

Got your PMs...
I have found a solution for your problems..
Ok... here it goes.
Download these to begin with while you READ (if you not already downloaded them from above post).
https://rapidshare.com/files/454052569/2.10.531.4.zip
http://rapidshare.com/files/450996411/special_sappimg.zip
http://rapidshare.com/files/436753940/2.53.707.2_-_sappimg.zip
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is: the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big it is ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
But the problem lies in the following. All the RUU/sappimg with a spl compatible with the 6.35 radio has a higher version than yours(starts with 3 something). If we update the version, we cannot flash the desired sappimg which follows. The goldcard will only update up in verion nr, NOT down.
Here comes the trick: I have found a special rom, which is part of a 2-part update which will not update your version nr...
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard. I recommend to flash one with a eng spl inbuilt like the 2.53.707.2 sappimg. But if the device would not accept that sappimg(don't ask me why), try the 2.10.531.4.zip which is the same version nr as you have now.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, you should rename the 2.53.707.2_-_sappimg.zip to sappimg.zip and flash it using the goldcard. This image should give you an eng spl. If you device will not accept it, then rename the other rom to sappimg.zip and flash it using the goldcard.
5) If you indeed get the eng spl, then you have full control and we can do almost anything we want. Just post here and we can take it from there. The eng spl has the following nr: 1.33.2010.
If you flashed the stock rom, then you only need to flash custom recovery and you should almost be there... also here post the progress and we will take it from there.
Hope that you will succeed... :0)

I am having this same problem!!! I can't flash any of these and I am stuck in Ruu mode.
SPL/hboot version: 1.33.0013.
Radio version: 6.35.08.29.
Main software version: 2.10.531.4.
cid: t-mob010.
cpld: 13.
product: sapphire.
mid: sapp31000.
security: on.
build-mode: ship.
I can't get past updating the radio it hangs and will not continue. Is there any help you can offer me?

Don't necropost... You already posted your problem here: http://forum.xda-developers.com/showthread.php?t=1359940
If you will post your question in whole forum and all topics - i don't want to help you...

help me htc magic 32a

please help me for my htc magic 32a
this is my info
sapphire UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006(SAPP10000)
CPLD-12
Radio 2.22etc.
i flash my 32a with sappimg.nbh, and i cant go to recovery mode. fastboot only, the problem is, i cant go to recovery mode, only bootloader or fastboot, but i cant flash any recovery.img or something. i dont know why, sorry im a little noob. i dont know what to do. experts please help me. i cant create a goldcard bcos i cant access my phone.

Download my fastboot commander from my signature and provide all device info.

i already try that fastboot commander. but my phone was on S-on. it always fail when im trying to boot or flash on my phone.

I believe that my instructions was very clear.. :0)

sorry im very noob .
---------- Post added at 12:18 AM ---------- Previous post was at 12:15 AM ----------
i dont know how to turn of my security. T_T S-ON to S-OFF

Dude... read my instructions...
Download fastboot commander. PROVIDE HERE ALL DEVICE INFO.

sorry sir. bcos fastboot commander tells that it fails. whenever i flash the hboot or radio. it fails. when i deleting the files it fails.

Dude... Read...read...read...read what i write..
PROVIDE HERE ALL DEVICE INFO
Don't flash anything... don't do ****... just provide the device info so i can assess what the problem is.

dude i wrote it already.
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006(SAPP10000)
CPLD-12
RADIO-2.22.19.26I
no recovery
hangs at htc logo
fastboot is my only chance.

What part of ALL do you not understand?
Just forget it... i'm out.

Operating system: Windows.
Tools folder found.
Windows fastboot tools found.
The folder containing the IMG files was not found.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
Radio version: 2.22.19.26i.
SPL/hboot version: 1.33.0006.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.
ARE YOU SURE THAT THIS IS THE RIGHT TOOL FOR YOU?.
this is what you talking about. hehe

You are close... but that is the info from the magic version..
If you download the new/generic version, there is more info there.
I want the main version, cid and the cpld.

Operating system: Windows.
Tools folder and fastboot file(s) created.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 1.33.0006.
Radio version: 2.22.19.26i.
Main software version: 3.04.401.2.
cid: smcvd001.
cpld: 12.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.
ARE YOU SURE THAT THIS IS THE RIGHT TOOL FOR YOU?.
here sir.

jerald197 said:
SPL/hboot version: 1.33.0006.
Radio version: 2.22.19.26i.
Main software version: 3.04.401.2.
cid: smcvd001.
cpld: 12.
Click to expand...
Click to collapse
Now we can work :0)
*cpld 12 tells me that this device is pure 32A. Good
*2.33.19.26i radio tells me that you tried to flash using a goldcard, but you flashed the wrong sappimg.zip/ruu file.
* 1.33.0006 spl same as radio.
*3.04.401.2 tells me tha you tried to flash HTC Austria test-signed ruu, but that did not succeed.
The fix:
Download this: https://rapidshare.com/files/1199739414/3.05.401.1_1.zip
And this: https://rapidshare.com/files/822530102/3.05.401.1_2.zip
Rename the first file to sappimg.zip and flash it using the goldcard. It willl restart by itself. Do the same for second file.
Once all done, start the device and you shall see the android system starting up. From there you follow my guide found in my signature. Once done with rooting, custom recovery and perhaps eng spl, you can flash whatever rom you like from development section.
Good luck

sir i dont have a goldcard. but i read that i can use an old card. old card means that old goldcard of others?
sir the only problem now is how can i get a goldcard if my phone is stuck in htc logo.
i try flashing it without goldcard. it says that cid incorrect update fail

You need a goldcard... it's the only way... old goldcards are fine :0)
You can make a goldcard from any android device

ok thx. huhu

sir can you give me a goldcard. bcos i cant have one. please

sir i already do it. haha. now this is my device info.
Operating system: Windows.
Tools folder found.
Windows fastboot tools found.
The folder containing the IMG files was not found.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
Radio version: 6.35.08.29.
SPL/hboot version: 1.76.0009.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
. it is a hero rom. it is safe now to change a rom?like gingerbread.? and 1 question. my sensor is not working. is it bcos of my rom?