Help me with Asus P320 - Windows Mobile Development and Hacking General

I was using hdubli's Asus p320 WM 6.5 rom. it gave me stability issues, so i tried to revert to the original ASUS WWE from their website. I'm sort of locked out of my phone right now. The hdubli rom wont boot, and a flashing attempt says "Read SD Busy!" and screen goes white. PLEASE HELP

Hi,
I am also facing the same problem after i had installed the windows mobile 6.5 hdubli's ROM on my ASUS p320. I had downloaded the official ROM's from ASUS website of all versions available and when i had tried to install it had shown the following error messages.
1. When followed as per the instructions given the following error
"No Package found"
2. When copied to the root of SD card and renamed the file from 850_GAX_SD_ENC.bin to 850_GAX_SD.bin given the following error
"Header_CRC Error"
3. When extracted with the tool and copied all the extracted files to root of the SD Card and tried to install given the following error
"
Valid Package
No GSMFFS
Total 3 Images found
FLASH.BIN
GSM.BIN
EXT_ROM.NBO
"
4. When tried to install again the same package hdubli's windows mobile 6.5 ROM given the following error message
"Read SD busy"
Nothing happens after this. Can anyone helps me out in this issue.
Thanks in advance

Big nasty bump!

Related

Can't flash 3.17/ 3.16 after installing XDA devel ROM

I installed the XDA developers ROM flawless, but the GRPS browsing deosn't work, and I need it. I want to go back to the original ROM, or other original QTEK ROM, but when I run the installer it stops after "waiting 10 seconds.." I tried 2 different ROMS I've found inthe forum, the UK [email protected] 3.17... and the 3.16...
How can I go back? Is it possible? Please developers help me
Thanks
yes, it's no problem to flash (downgrade?) it to O2 3.xx,
I am not very sure what happened in ur XDA, but I suggest try to use Image Tool to burn the O2 rom.
what's the image tool?
Is it different from the installer I tried?
OK, here is the reason:
B coz the rom which from xda-developers is base on qtek rom, so the id of ur XDA has been changed to qtek's id, once u want to install the rom from O2, the upgrade program found a different id and refuse to upgrade it.
u can:
use Image tool to write the ROM from O2
or
run adaptRom.exe in ur pc to update the ROM from O2, and then u can 'install' it from ur pc to XDA
how exactly I use the ADAPTROM?
I run it from the pc and nothing happenned. (A dos window opened and closed immediately) In which directory should I run it? Or is it from the mobile device through the pc? Please explain me.
The other thing is that I didn't understand correctly the process with the ROM image tool. I copied the ROM from the QTEK to the SD, and then I wrote in the SD the upgrade. Now the pc doesn't recognize de SD, I can't even format it and I'm too afraid to put it back in the XDA.
ANy ideas what should I do? I even tried Isobuster but it didn't read it.
Esteban
Copy adaptROM.exe to same direcory as installer (under "Program Files", called "RUU", "Programme A" or somthing similar.
Go to this directory using the command prompt, and then run adaptROM in that directory.
Run "Programme A", it will not complain anymore...
We're working to make this easier...
i am facing the same problem
hello dear xda-develpoers .... i have the same problem but i have the qtek and i flashed it with the new o2 rom with the xda-developers 1.1 but i cant go back to my orgeinal qtek rom ..i have triyed copying the adaptROM.exe to same direcory as installer (under "Program Files", called "RUU" then i have tryied to flash the rom but nothing changes can u please help me....thanks very much
I hope you also ran adaptROM, and not just copied it. First run adaptROM, then "Programma A"...

need help installing 1.2

Hi
The installer stops after the "wait 10 sec" msg, even after I manually run the AdaptRom application. Then I tried to write the .nb file to the sd with xdarit and 2 seconds after starting it cancells itself...
What's happenning?
I bet you're using the newer version of XDArit, if so try using the older 1.0 one.
It can be download from the software section at:
http://www.yorch.net
I am a newbie and have little knowledge of doing the upgrading. I downloaded the files and when I run it, I got the following message: Error 007: No ROM image file. Cannot find the ROM image to upgrade your POCKET PC. Please download and try again.
What should I do? As I said, I have very little knowledge of doing this.
Can someone please help?
Thanks

active sync problem

I have tried to install an upgrade for my xdaII. Unfortunately it was UK upgrade I started to install into my Asian xdaII. Halfway through the installation there was a ROM version error and it has rejected installation.
Now there isn't any software or an operating system in my pocketpc. There is no way I can sync this with my pc for the installation of the correct version.
Can anyone help?
there is this guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
you can extract the nk.nbf file from the UK upgrade and use xdanbftool.exe to modify the language ID then re-flash your device.
In your case, you should have a frozen dimmed screen with the word "Serial" on top and the boot loader version towards the bottom of the screen ... if by inserting the device into the cradle the word Serial changes to USB, this means the boot loader is still in function.
Good luck
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
Can you please help!
Isn't there anyone who can help me soon???

[ROM] Windows Mobile 6.1 for HTC ELF/ELFin

VERY IMPORTANT TO NOTE:
This custom ROM is built for installation onto both the ELFs and ELFins.
DO NOT FLASH IT TO ANY OTHER DEVICES! I will not be responsible for any damage to your device.
FOR FIRST TIME CUSTOM ROM UPGRADERS:
1. Copy the Cert_SPCS.CAB and EnableRapi.CAB from the zip folder to your device's Storage Card.
2. Install the two cabs to your Device memory and do a soft reset.
3. Restart your PC or laptop (Optional)
USING THE INTEGRATED ROM UPDATE UTILITY WITH USPL CID UNLOCKER:
(ATTENTION: REMOVE YOUR 4GB, 6GB or 8GB mircoSDHC CARD WHEN FLASHING THIS ROM!)
1. Turn off your computer's Anti-Virus software if you can.
2. Activesync your device to your PC using USB port.
3. When the connection is completed (after synchronisation), double-click on [START] batch file to begin the integrated ROM Updating Utility.
4. Now follow closely the instructions that appear on the computer screen.
5. Press [ENTER] to accept at each prompt to continue the process.
6. After Step 2/3 of USPL CID Unlocker, the device screen will turns "blank white" and your activesync icon gray (in Windows XP only).
Congratulations! You have successfully CID unlocked your device. Press [ENTER] to proceed NOW!
(NB: If you failed to see the "blank white" screen, then your CID unlocking has failed.
Restart your installation process from Step No.1)
7. Your device will now proceed to update your rom. Select and hit [NEXT] at each prompt to continue.
8. When the rom updating is completed at 100%, your device will restart automatically.
9. Congratz! You have successfully upgraded to a new rom.
Enjoy!
__________________________________________________________________________________________________
I did this had no problems with my htc elf/elfin/touch over the moon with it!!!
REMEMBER: all of your installed applications will be swiped of with this ROM.
Also have fun with your upgraded windows mobile 6.1 HTC ELF!!!
__________________________________________________________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
__________________________________________________________________________________________________
please tell me if there is any problems post a reply...
forgot to menchion download the full thing at > http://thepiratebay.org/torrent/4277382/Windows_Mobile_6.1__en_for_HTC_Touch
DO NOT BE A NOOB FOLOW THE ON SCREEN INSTRUCTIONS!!!!!!!!!!
__________________________________________________________________________________________________
'Start' batch file does nothing.
Tried opening it directly from a command prompt, but still nothing, except it opens another dos box.
Thoughts ?
The 'start' batch file fails because the first command is 'cd RUU'. but there is not a folder called RUU.
Then it tries to rename two files which also do not exist. Hence it never actually arrives at the exe file to unlock & install the ROM.
Can this work if you simply run the exe file without renaming & changing folders ?
Hi, and thanks for that script...
The .bat works well for me but while updating the rom, I've got an 270 error... 'The images files is corrupted please check your update utility'
does any one had the same issue on his phone? Do you think I just need to download it again? (concidering that the zip file uncompressed normaly, I assume it works well...)
Thanks for your answers...
upgrading MDA Touch
please i need your Help.
I have download the" touch essential V3.5 Manilla" on my PC. But i don´t know how to send it to my MDA.
Activsyc is working.
Where kann i fine the cert_CAB?
I have also unpacked the V3.5 manilla, but there is no way to run it in the MDA how should i do this.
many thanks
My 2 cents...
If I were you I wouldn't rely on a torrent posted by a junior member (age 12) and rather download the ROM posted by Football on Rapidshare => See his post HERE <=.
I've been using it from day 1 without any problem...
gruikdadude...
gruikdadude... I understand were you are coming from but I have been very carefull on what i look for and actually this torrent file was uploaded by someone on xda developers so i am saying the update worked fine for me so why shouldnt it for you so before you start criticising a me for posting something that is just to assure htc touch owners that there is a reliable WM6.1 upgrade is there anything wrong with this......... NO!!! so before you criticise think twice !!!bell end!!!
__________________________________________________ ________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
________________________________________________ __________________________________________________
r there any direct download links?
as i prefer not to download through torrents...torrents downloading over here sux...
whiplash1995 said:
so before you criticise think twice !!!bell end!!!
Click to expand...
Click to collapse
Not criticizing you at all: just warning xda members that downloading any posted ROM can be harmful for their PPC...
EOF
Can you plz. give us link for zip file instead of the ttornet one
thanks in advance
can you tell me the diffrences between this rom and the original 6,1 rom? i see no manilla2d, but more differences?
hi i tried the whole procedure , but i get the ERROR[270]: Image file is currupted, can anyone help regarding this error, how to get the uncurrupted version?
Since this rom is giving a lot of people problems, why not just use one of the verified good roms from the Elf Upgrading subforum?

[q] tool version dosent match !!! Hd2

hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance
cmully said:
hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance
Click to expand...
Click to collapse
in the cab sender, there should be 3 folders, one of them says if needed, install this tool. try installing that (there is 1 32bit and 1 64bit so just install the one for your system). also make sure the cab sender app stays in the same folder as those 3 folders. so in the WP7 Cab sender folder (or whatever the main folder is called)you have:
FOLDER: if needed install this tool
FOLDER: logs
FOLDER: tools
and the WP7 Update Cab Sender.bat file
thanks gonna TRY NOW ill report back
hi
just tried again and it returned a new message (as below) am i missing something.
and y does it want to update me to 7403 isnt it supossed to update to 7220 first as zune already updated me to 7392 ????
thanks again
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180011, error message: IU (Image Update) installation failed on phone: None
of the packages in the update are applicable.
■
╚══════» Done
Press any key to continue . . .
thought id cracked it tried to install mango rtm cabs and this come back if this is any help
think i might start again if so do i need to task 29 or can i just re flash the rom
Name: HTC HD2
KITLName: QSD8XXX07185665
Manufacturer: HTC
ModelId: 1
Model: HD2
MobileOperator: 000-00
Version: 07.00.07392.03-00.00.00000.00-00.00.00000.00
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180005, error message: IU (Image Update) installation failed: The update pac
kage isn't a valid CAB file.
■
╚══════» Done
Press any key to continue . . .

Categories

Resources