I installed the XDA developers ROM flawless, but the GRPS browsing deosn't work, and I need it. I want to go back to the original ROM, or other original QTEK ROM, but when I run the installer it stops after "waiting 10 seconds.." I tried 2 different ROMS I've found inthe forum, the UK [email protected] 3.17... and the 3.16...
How can I go back? Is it possible? Please developers help me
Thanks
yes, it's no problem to flash (downgrade?) it to O2 3.xx,
I am not very sure what happened in ur XDA, but I suggest try to use Image Tool to burn the O2 rom.
what's the image tool?
Is it different from the installer I tried?
OK, here is the reason:
B coz the rom which from xda-developers is base on qtek rom, so the id of ur XDA has been changed to qtek's id, once u want to install the rom from O2, the upgrade program found a different id and refuse to upgrade it.
u can:
use Image tool to write the ROM from O2
or
run adaptRom.exe in ur pc to update the ROM from O2, and then u can 'install' it from ur pc to XDA
how exactly I use the ADAPTROM?
I run it from the pc and nothing happenned. (A dos window opened and closed immediately) In which directory should I run it? Or is it from the mobile device through the pc? Please explain me.
The other thing is that I didn't understand correctly the process with the ROM image tool. I copied the ROM from the QTEK to the SD, and then I wrote in the SD the upgrade. Now the pc doesn't recognize de SD, I can't even format it and I'm too afraid to put it back in the XDA.
ANy ideas what should I do? I even tried Isobuster but it didn't read it.
Esteban
Copy adaptROM.exe to same direcory as installer (under "Program Files", called "RUU", "Programme A" or somthing similar.
Go to this directory using the command prompt, and then run adaptROM in that directory.
Run "Programme A", it will not complain anymore...
We're working to make this easier...
i am facing the same problem
hello dear xda-develpoers .... i have the same problem but i have the qtek and i flashed it with the new o2 rom with the xda-developers 1.1 but i cant go back to my orgeinal qtek rom ..i have triyed copying the adaptROM.exe to same direcory as installer (under "Program Files", called "RUU" then i have tryied to flash the rom but nothing changes can u please help me....thanks very much
I hope you also ran adaptROM, and not just copied it. First run adaptROM, then "Programma A"...
Related
Hi,
This probably the most asked question here yet I have one thing thats different to the others from what I have read.
I live in Australia, my 02 XDA ppc isnt sim locked or anything however my issue is related to the o/s I have ppc2002 I wanted to upgrade to 2003 and found a file for download and am unaware if this file is the correct file to download for upgrade to my XDA?
I also know I need a radiostack which will work on my XDa once it has been updated to 2003.
2003 file @ http://cuba.calyx.nl/~jsummers/XDA/PPC2003PE.nb1.zip
Radiostack which will work for me?????
Any help would be appreciated aswell as telling me what are the neccessary files on my PC to use to flash the ppc phone edition via my USB cradle also.
Any other info should be available with my profile.
Regards
A7MAD
Hi,
if ur phone works fine in making/receiveing calls, then all u need is a ROM upgrade. goto the kitchen at www.yorch.net and cook a ROM based on 4.00.05 ENG. select the file to be an exe file. download the file to ur PC and connect the xda to the cradle and make sure it's connected to power. run the exe and follow the instructions.
good luck
Hi,
Thanks Biso007 for all your info/help.
I am currently downloading the file that I 'cooked' as I type this out however one thing I was not sure about was in the string section was I to change the string to 4.00.05 as it was set on 3.16 ...
I did change it and its downloading I assume there should not be any issues.
If there is any concerns or if I did the wrong thing by that please inform me... BTW the file was made into an .exe.
Regards
A7MAD
Hi,
I visited www.yorch.net and 'cooked' my own ROM made it into an exe and have it downloaded right here it's a 4.05.00 rom flash but I have to ask what software can I use to flash the unit with because I do not have an SD card so I am stuck using my PC to do the flash, I have the official backup files for my ppc from 02's site so I am ok I guess if all else fails i will flash back to what I am currently using.
I wanted to flash the rom onto my ppc however what software can I use? I tried Microsofts Sync software I have 3.7 but it doesnt allow me to flash as it gives me an error message.
Message says:
"Your Device Information;
PW10A1:001
3.20
English
Your upgraded image info;
PW10A1:007
3.16
English
Please download the compatible utility and try again"
Any help would seriously be appreciated, but what is the compatible utility?
Regards
A7MAD
unfortunately this is a known issue with some ROMs that can't accept the exe method. you are stuck with the SD card upgrade.
Will adaptrom not work for this?
Hi, I'm hoping to get some help with cooking and burning ROMs to my o2 XDA.
My original product specs are:
ROM Version: 3.20.06 ENG
Radio version: 4.21.01
I cooked and then downloaded 4.01.00 ENG from Lumpi Stefan's site, then ran the rom.exe file that it produced for me. Everything worked fine, and then I rebooted my XDA. Upon first boot the phone appeared to work, but after performing a soft-reset because the XDA froze, all of the phone functionality appears to be not working.
When I do a hard-reset I get: Wallaby Bootloader v6.22 - GSM OK which I think looks good as far as the phone functionality is concerned. Looks like it's the OS that's on the XDA which is causing the phone difficulties.
I read somewhere that if you burn any T-Mobile ROMs an SD card is *required* to reverse it and put a different ROM on the XDA. Well, the cooked ROM I downloaded is from T-Mobile - I didn't know this before I started!
I don't have an SD card, and am in dire straits about getting my phone to work. Is it possible at all to get this to work, or perhaps to go back to my original ROM (I backed it up to orig.nb1) using XDAtools. Anytime I try to burn the .nb1 file back to my XDA it fails. Or is the ONLY way to get an SD card and use the Bootloader technique? I even tried downloading the 3.17.03 ROM upgrade directly from the o2 sitebut it fails.
Any help will be GREATLY appreciated.
Thank you.
[qoute]I read somewhere that if you burn any T-Mobile ROMs an SD card is *required* to reverse it and put a different ROM on the XDA. Well, the cooked ROM I downloaded is from T-Mobile - I didn't know this before I started![/qoute]
this is true with 4.00.10 and 4.00.16 but not anymore with 4.01.00.
if your xda still can be connected to activesync, try to reflash the ROM.
Otherwise, you have to use the SD flashing method.
[qoute]I read somewhere that if you burn any T-Mobile ROMs an SD card is *required* to reverse it and put a different ROM on the XDA. Well, the cooked ROM I downloaded is from T-Mobile - I didn't know this before I started![\qoute]
this is true with 4.00.10 and 4.00.16 but not anymore with 4.01.00.
if your xda still can be connected to activesync, try to reflash the ROM.
Otherwise, you have to use the SD flashing method.
Thanks, I will try. ActiveSync still works...
I notice you are running the same ROM version as me - sis your radio still work?
Can you verify that I am trying to Flash the ROM correctly?
1. Confirm that I have orig.nb1 - yes, it's there - backup of original ROM before I started this whole dilemma.
2. Ensure that XDA is Activesync'd - yes, as "Pocket_PC" - all working okay.
3. Right click on orig.nb1 and select "burn"
4. OSImageTool.exe then pops up and copies orig.nb1 to Programme A.
5. A DOS box then appears saying "ERROR: GetConnectionType - A
ote host. error getting connectiontype".
6. Programme A then runs and after pressing "next" a couple of times, I get an error - "Error 011: Cannot execute the remote communication program. Pleace make sure that the USB cable is properly connected."
And that's basically it.
I have tried different variances of this, but all without success.
Help!
BTW, I'm logged in to MSN Messenger now, could you let me know when you're online - or anyone else, for that matter. My address is [email protected]
This message means that the current ROM in your XDA can't be flashed through Program A ... not a big issue, for unknown reason it happened with me few times ... but now you have to use SD card to flash your ROM.
Here is an update...
I have played around some more with the XDA with no success. I have now bought a 64MB SD card and am unsure as to how the ROM image on my PC gets onto the SD card. This is how I have been doing it:
1) Insert SD card into XDA
2) Place XDA into cradle
3) XDA then ActiveSync’s to the PC
4) Run OSImageTool.exe and select the following –
a. Source: “C:\Documents and Settings\Paul\Desktop\orig.nb1”
b. Destination: “XDA SD card slot – unknown size”
5) Then I press “copy” and I see the progress bar go across to 100%. After this appears to finish, the program just sits there not telling me it’s finished. I assume that it’s all okay and I then close the program
6) Take XDA off cradle and hold power button down whilst doing a warm-reset
7) The following appears: “Wallaby Bootloader v6.22 – GSM OK” – nothing else happens, and from what I have read it is supposed to ask if I want to perform a ROM upgrade. However, I can get into the diagnostic and flash tools by pressing the action button etc, but nothing is in there to upgrade the ROM.
Does the fact the OSImageTool destination says “XDA SD card slot – unknown size” matter? I’m assuming not because when I have transferred the ROM using the above steps, the XDA asks if I want to format the card; meaning that the transfer worked okay. Do I have to have an SD card reader/writer on my PC to get the ROM onto the SD card?
I have read a little about a Bootloader patch – do I need to run this, and how do I get it onto the XDA – using the same method?
I would be very appreciative of any help that can fix this, as all I want to do is get my three-day old XDA working again!
Any other comments and help in relation to solving this hair-challenging issue would be great!
Thanks,
Paul…
Ok ... from what you wrote it seems your doing it correctly. However, I have doubts on the file orig.nb1 you are using ... maybe it wasn't copied properly.
Try to cook any ROM (TMO 4.01.00 is good) at Stefan kitchen and you can cook it as .nbf or EXE then extract the .nbf file using winzip or winrar.
Follow the same steps and let me know.
Good luck ...
Is bootloader v6.222 okay - will it allow me to overwrite my current ROM with this new ROM that you are suggesting? I have read that I may have to downgrade my bootloader to do the SD ROM writing thing.
I can't confirm that my self ... I used SD with 5.17 and 6.22 without problems but maybe it's my luck
Cook the 4.01.00 as EXE and try it as is or extract the .nbf file and use the SD method.
Okay I'll give that a go now... Will let you know how I go...
Nope - didn't work. I'm not getting a screen in the bootloader to update the ROM via SD - if I press the action button I get into dignostics...
Is this a bootloader issue, and if so, how do I downgrade?
Also just tried the following:
C:\Program Files\XDAtools\binaries>pnewbootloader bootloader_v5_15.nb0
And got the following error message:
Unable to find flash info offset, cannot disable bootloader writeprotect
Any ideas?
I don't get it ... you cooked and downloaded and tried a new nbf file for TMO 4.01.00 in less than 15 minutes ??!!!!
what is the nbf file size ??
Yes, I used Winzip to extract NK.nbf. It is 31,745kb.
I am now cooking on Lumpi's site a zipped NK.nbf file and will try that too...
hi,
thanks to the support on this site i was able to unlock my o2 xda. the new rom of your special xda-rom was installed. as it is only in english i would like to have a german rom again..... downloading and installing the o2 or t-mobile updates always failed. the rom-image wasn't found or the active sync-connection failed.... is there a german tool available?
cook 4.00.33 or 4.01.19 based ROM in the kitchen and use the SD method
o2 rom german
thx for your quick help. downloaded rom kitchen yesterday. but there is no executable file resp. can't find my handheld in the winzip unzip-folders.... furthermore i am a beginners and did not really understand how to use the sd-card. if i try to install the progamme a from o2 i always get default "rom image not compatible" or even "can't establish active snyc connection" (even if xda is connected and syncronized the other data correctly.
I think your choices are either to get used to the English OS, or to look around a bit more on this site to learn the SD-method.
I would personally opt for the first choice, but being from Sweden I really don't have a choice. There isn't such a beast as a Swedish WM 2003 for the xda :-(
SD method is quite easy .. cook ur ROM as .nbf file ... copy this file to the SD card using the xda with XDAtools or a SD reader/writer .. insert the card in ur xda and goto the boot loader screen .. it will automatically flash ur ROM
To unlock my device I installed the XDA Special Edition ROM on my SX56 by running the executable. My device is a PW10B1 (printed on the back of the device). Unfortunately, after installing the XDA ROM, my device information says the device is a PW10A1. Now this seems to be causing a problem. I want to get WM 2003 back on the device but running the AUTO update tool (Executable with the Wm20003 update) errors out saying that my device is a PW10A1 and not a PW10B1. First signs of panic.. Ok. So I decided to search for the original PPC2002 ROM for At&T and I found it. But its a .nbf file. So I downloaded XDATools hoping to write the image to the device memory or to the SD Card. However I cant seem to access the device from the Destination Browse Button of the XDATools App. The browse dialog that comes up does not include the "Mobile Device" listed under "My Computer". In my windows explorer I can see it listed. How do I get XDATools to wite it to the device rom directly?
Any help would be appreciated
If I cannot flash the XDA directly using XDAtools, are there some PPC 2002 ROM Executable Updates (At&T 2002) available that will bring my SX56 back to PW10B1?
Try using adaptrom.....
http://wiki.xda-developers.com/wiki/adaptROM
HTH
Stefan
Adaptrom will let me put the Wm2003 update on the phone but the problem is, it will leave the phone as a PW10A1 and not convert it to a PW10B1...I need to convert the ROM back to its original state.. I will try to put the original Image on an SD Card and see if I can boot off that..
VERY IMPORTANT TO NOTE:
This custom ROM is built for installation onto both the ELFs and ELFins.
DO NOT FLASH IT TO ANY OTHER DEVICES! I will not be responsible for any damage to your device.
FOR FIRST TIME CUSTOM ROM UPGRADERS:
1. Copy the Cert_SPCS.CAB and EnableRapi.CAB from the zip folder to your device's Storage Card.
2. Install the two cabs to your Device memory and do a soft reset.
3. Restart your PC or laptop (Optional)
USING THE INTEGRATED ROM UPDATE UTILITY WITH USPL CID UNLOCKER:
(ATTENTION: REMOVE YOUR 4GB, 6GB or 8GB mircoSDHC CARD WHEN FLASHING THIS ROM!)
1. Turn off your computer's Anti-Virus software if you can.
2. Activesync your device to your PC using USB port.
3. When the connection is completed (after synchronisation), double-click on [START] batch file to begin the integrated ROM Updating Utility.
4. Now follow closely the instructions that appear on the computer screen.
5. Press [ENTER] to accept at each prompt to continue the process.
6. After Step 2/3 of USPL CID Unlocker, the device screen will turns "blank white" and your activesync icon gray (in Windows XP only).
Congratulations! You have successfully CID unlocked your device. Press [ENTER] to proceed NOW!
(NB: If you failed to see the "blank white" screen, then your CID unlocking has failed.
Restart your installation process from Step No.1)
7. Your device will now proceed to update your rom. Select and hit [NEXT] at each prompt to continue.
8. When the rom updating is completed at 100%, your device will restart automatically.
9. Congratz! You have successfully upgraded to a new rom.
Enjoy!
__________________________________________________________________________________________________
I did this had no problems with my htc elf/elfin/touch over the moon with it!!!
REMEMBER: all of your installed applications will be swiped of with this ROM.
Also have fun with your upgraded windows mobile 6.1 HTC ELF!!!
__________________________________________________________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
__________________________________________________________________________________________________
please tell me if there is any problems post a reply...
forgot to menchion download the full thing at > http://thepiratebay.org/torrent/4277382/Windows_Mobile_6.1__en_for_HTC_Touch
DO NOT BE A NOOB FOLOW THE ON SCREEN INSTRUCTIONS!!!!!!!!!!
__________________________________________________________________________________________________
'Start' batch file does nothing.
Tried opening it directly from a command prompt, but still nothing, except it opens another dos box.
Thoughts ?
The 'start' batch file fails because the first command is 'cd RUU'. but there is not a folder called RUU.
Then it tries to rename two files which also do not exist. Hence it never actually arrives at the exe file to unlock & install the ROM.
Can this work if you simply run the exe file without renaming & changing folders ?
Hi, and thanks for that script...
The .bat works well for me but while updating the rom, I've got an 270 error... 'The images files is corrupted please check your update utility'
does any one had the same issue on his phone? Do you think I just need to download it again? (concidering that the zip file uncompressed normaly, I assume it works well...)
Thanks for your answers...
upgrading MDA Touch
please i need your Help.
I have download the" touch essential V3.5 Manilla" on my PC. But i don´t know how to send it to my MDA.
Activsyc is working.
Where kann i fine the cert_CAB?
I have also unpacked the V3.5 manilla, but there is no way to run it in the MDA how should i do this.
many thanks
My 2 cents...
If I were you I wouldn't rely on a torrent posted by a junior member (age 12) and rather download the ROM posted by Football on Rapidshare => See his post HERE <=.
I've been using it from day 1 without any problem...
gruikdadude...
gruikdadude... I understand were you are coming from but I have been very carefull on what i look for and actually this torrent file was uploaded by someone on xda developers so i am saying the update worked fine for me so why shouldnt it for you so before you start criticising a me for posting something that is just to assure htc touch owners that there is a reliable WM6.1 upgrade is there anything wrong with this......... NO!!! so before you criticise think twice !!!bell end!!!
__________________________________________________ ________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
________________________________________________ __________________________________________________
r there any direct download links?
as i prefer not to download through torrents...torrents downloading over here sux...
whiplash1995 said:
so before you criticise think twice !!!bell end!!!
Click to expand...
Click to collapse
Not criticizing you at all: just warning xda members that downloading any posted ROM can be harmful for their PPC...
EOF
Can you plz. give us link for zip file instead of the ttornet one
thanks in advance
can you tell me the diffrences between this rom and the original 6,1 rom? i see no manilla2d, but more differences?
hi i tried the whole procedure , but i get the ERROR[270]: Image file is currupted, can anyone help regarding this error, how to get the uncurrupted version?
Since this rom is giving a lot of people problems, why not just use one of the verified good roms from the Elf Upgrading subforum?