[Q] G2 on AT&T Won't load anything - G2 and Desire Z General

First off, yes, I am a noob, and I love the video you guys have to welcome us noobs to the forum
Second, I understand COMPLETELY that the G2 on AT&T does NOT support 3G.
Third I understand it DOES support edge (or 2G from the iPhone world as that is where I come from)
Now, Even though I have full signal in edge, but NO wifi, I cannot load a web page in the browser. In fact, I cannot connect to the internet whatsoever. I can send texts and make phone calls, but no internet. Is there some hack that I need to do to enable it? Could it be because I'm using a micro sim for an iPhone 4?
Thanks!

You need to edit the APN settings for AT&T.
I don't know what they are offhand

True, you need to manually enter the APN settings for the phone to work on AT&T's data network. The APN is found under Settings>Wireless & networks>Mobile networks>Access point names
The proper settings are here:
http://android.modaco.com/index.php?s=&showtopic=309124&view=findpost&p=1281824
However, this does not explain why WiFi does not work. Not sure what's going on there.

Heh such a simple answer. I was trying to figure it out for 3 hours straight. Thanks guys, this forum's the best already
Now for some rooting heh

TheZimm said:
Heh such a simple answer. I was trying to figure it out for 3 hours straight. Thanks guys, this forum's the best already
Now for some rooting heh
Click to expand...
Click to collapse
Welcome to the forums. You made a good choice for your first Android phone. The G2 has it all, including massive developer support.

Thanks for the APN. Editting this would only make Edge work?

LGS1231 said:
Thanks for the APN. Editting this would only make Edge work?
Click to expand...
Click to collapse
In the case of the G2 on AT&T, yes. The G2 does not have the correct radio hardware to be compatible with AT&T's network. But if the correct hardware is present, the APN info allows you to connect to EDGE and 3G for your particular network.
Also, if you found my post above useful, be sure to click the "Thanks" button!

Related

HTC Hero (CDMA / SPRINT) flashed to Cricket Wireless

for those who may be interested...it is possible to have your hero flashed to work on the Cricket network. it may not be for everyone, but i couldn't resist the lure of $40/mo unlimited everything with no contract. (saves around $1,000+ over the life of the contract)
here's what i did:
-buy cdma hero on ebay
-go to a cricket store and ask them to activate the phone
-usually the rep will "know a guy" who can work with htc (try a few stores or call around)
-they may charge you $30 or so to flash it and its working
wireless data, visual voicemail, and mms dont' work...but they expect to get them working soon (phone is only a few weeks old at this point)... and where i'm at, i almost always have wifi and don't care about vm or mms.
Might see if any of these guys know about xda...perhaps they just need to be pointed here to share the wealth of what they're doing.
HTC Hero Phone Code Numbers ##
if you do transfer to cricket (or perhaps another cdma carrier), a good thing to know is:
##000000#
this will allow you to edit or view EPST (change/view your Mobile Directory Number MDN and MSID)
The MDN is your current phone number, your local cricket store can give you your MSID (which also depends on your phone number).
yourmanstan said:
for those who may be interested...it is possible to have your hero flashed to work on the Cricket network. it may not be for everyone, but i couldn't resist the lure of $40/mo unlimited everything with no contract. (saves around $1,000+ over the life of the contract)
here's what i did:
-buy cdma hero on ebay
-go to a cricket store and ask them to activate the phone
-usually the rep will "know a guy" who can work with htc (try a few stores or call around)
-they may charge you $30 or so to flash it and its working
wireless data, visual voicemail, and mms dont' work...but they expect to get them working soon (phone is only a few weeks old at this point)... and where i'm at, i almost always have wifi and don't care about vm or mms.
Click to expand...
Click to collapse
I dont believe you. How could you possibly "flash it" with out root access?
Negrito said:
I dont believe you. How could you possibly "flash it" with out root access? /QUOTE]
don't believe me then...i'm sure i just imagined myself doing all those things and making phone calls without a sprint account.
Click to expand...
Click to collapse
yourmanstan said:
don't believe me then...i'm sure i just imagined myself doing all those things and making phone calls without a sprint account. ?
Click to expand...
Click to collapse
Well if im just "being stupid" then you could simply prove me wrong. Put up, or Shut up!
cant wait
Negrito said:
Well if im just "beingstupid" then you could simply prove me wrong. Put up, or Shut up!
Click to expand...
Click to collapse
i think he means the regular flash as in flashing the prl not flashing a cricket rom... i cant wait for a rom that i can use on cricket... i have text n voice workin but net and mms is light years away since the phone just came out... cmon guys speed it up... ive been prayin to the cricket flashing gods to give us a saviour to answer our prayers...
Not so far away
I´m in Mexico, and I have a Hero woking here with data. So far it´s 1x, but I only worked on it for about 3 hours. After this long weekend (we have monday off here) I´ll get to work on it to make Ev work.
Don´t lose heart It´ll get there.
Negrito said:
I dont believe you. How could you possibly "flash it" with out root access?
Click to expand...
Click to collapse
The radio is separate from the OS and the traditional CDMA tools work on the Hero like any other phone. There are plenty of other forums talking about how to port CDMA phones to other providers; especially Indian forums because there are large CDMA networks there.
Edit: when he says "flash it," he probably just means to put a new PRL (preferred roaming list) and editing the details under ##DATA to match what another provider wants.
kRutOn said:
The radio is separate from the OS and the traditional CDMA tools work on the Hero like any other phone. There are plenty of other forums talking about how to port CDMA phones to other providers; especially Indian forums because there are large CDMA networks there.
Edit: when he says "flash it," he probably just means to put a new PRL (preferred roaming list) and editing the details under ##DATA to match what another provider wants.
Click to expand...
Click to collapse
Yeah, thats exactly what it says two posts above yours from a week ago.
jhgas said:
I´m in Mexico, and I have a Hero woking here with data. So far it´s 1x, but I only worked on it for about 3 hours. After this long weekend (we have monday off here) I´ll get to work on it to make Ev work.
Don´t lose heart It´ll get there.
Click to expand...
Click to collapse
any luck jhgas?
"Broadband Workaround Trick"
Hey guys!
I'm new to the Hero (CDMA Sprint flashed to Cricket) and Android. Totally new. I'm no stranger to Windows Mobile though, I've been a pretty intense user and contributor to development on the Axim x51v. Thought it was time to update though, and here I am.
Now, I've googled my butt off (which is going to make it tough to poop later, for sure), and I just can't find much detail or step by step info on how to get internet access working on this thing other than Wifi.
I have phone/text, and I also bought a Cricket Broadband plan to go along with it.
My phone is not rooted, not unlocked, unless this was part of what they did at the Cricket store to get my Hero flashed to Cricket.
I've read some mentions in google searches about a way to use my Broadband service through my phone... but I need some step by step info on how to do this. Can anyone help? What would be handy, as a somewhat savvy noob, would be prerequisites, instructions, and info I'll need to do this.
Thanks in advance if anyone can help, and I apologize in advance if I didn't google well enough before asking... although I definitely gave it a damn good shot before asking for help!
I've never tried it, so i don't know, but i have flashed a lot of WM phones to cricket with working mms and WAP. I would think you could get the internet to work by entering first changing your msl to 000000 and then just entering in all the correct settings in your EPST like you would a windows mobile phone?
cricket wap on hero
the phone has built in proxy support so u can download anycut from the market and input "wap.mycricket.com" and "8080" in the proxy settings. however most of the internet apps dont work, but the browser does. i believe the broadband hack or possibly the html plan will help in getting the internet apps to work but havent tried yet
htc hero wap no working
.i have a sprint htc hero that had cellular south on it now its flashed to cricket.the only thing working is calling.can you walk me through getting internet.i belive my wap setting are set up,but when i try and connect to mobile network it says "standbye for connecting to mobile network then connecting and keeps repeating"i have read that iv got to root the phone.iv been trying to root with no success.and hepl please .ty
htc hero cricket
please help dont want to try anything till im shure .lol
its actually possible. my friend works for cricket and got a sprint branded touch pro working. he just has voice and mms. but its a start i guess. i needs my data lol.
so why would you want a hero that only half the features work on?
i have an htc hero...i live in laredo tx..if anyone knows how i can flash this cell phone to cricket please let me know..they have told me that they dont have the software to do so..please HELP ME!!! *TeAr* and where did u guyz flash it so i can go overthere if i cant do to here....
yourmanstan said:
for those who may be interested...it is possible to have your hero flashed to work on the Cricket network. it may not be for everyone, but i couldn't resist the lure of $40/mo unlimited everything with no contract. (saves around $1,000+ over the life of the contract)
here's what i did:
-buy cdma hero on ebay
-go to a cricket store and ask them to activate the phone
-usually the rep will "know a guy" who can work with htc (try a few stores or call around)
-they may charge you $30 or so to flash it and its working
wireless data, visual voicemail, and mms dont' work...but they expect to get them working soon (phone is only a few weeks old at this point)... and where i'm at, i almost always have wifi and don't care about vm or mms.
Click to expand...
Click to collapse
hey please let me know where you flashed your htc hero....i will go to whereever to do so..LoL...im in laredo i think wer r not dat advanced n all this **** of flashing cell phones...

Bell atrix can no longer connect to bell network

Hi guys,
So I flashed, rooted and installed GreyBlur on mu Bell atrix, by following instructions from "seven2099"
It installed great and I have noticed a HUGE improvement in speed and other things.
Only problem, is now I can't connect to any bell networks for my 3G.
WiFi works fine. I am only posting in here, because I am not aloud to post in the developers section, so I am hoping this message can either find its way to "seven2099", or someone in here might know whats up.
Thanks in advance!
If you can do everything except connect to the Internet via 3G then you need to add your APN settings back in:
http://androidforums.com/827267-post4.html
Don't forget to "Save" (menu button/save) after you type all that in...
ccrows said:
If you can do everything except connect to the Internet via 3G then you need to add your APN settings back in:
http://androidforums.com/827267-post4.html
Don't forget to "Save" (menu button/save) after you type all that in...
Click to expand...
Click to collapse
Good but for one thing: Do NOT fill in APN Type. In the linked post it says 'Internet + mms'. I could not get a connection when I had that filled in, as soon as I set APN Type back to undefined it worked right away.
Just sayin'
excellent!
all worked out great!
thanks alot guys!
Bell Atrix always Roaming after 2.1.1
HI all
I spent two days trying to get to the bottom of this..
I installed 2.1.1 on Bell Atrix.. the first things I noticed the little (r) near the signal, checked the system info and it say ROAMING, my Data does not work unless I put Data Roaming on..
I am with Fido, and of course FIDO cannot tell me if really I am paying Roaming charges until the bill date which is 20 days away..
has anyone experienced that problem and has an explanation of some sort? Am I really Roaming or becuase its FR SBF the phone is reporting Roaming??
this is very disturbing and puzzeling as well.. any thoughts is really appreciated.

Sprint LS980 G2 LTE while on a call

Hey guys I have read searched and did not find this info anywhere so sorry if its is posted some place else...
The Problem - No LTE data during a phone call.
How do we enable this?
I have hard reset and all that other stuff but I simply can not get data to work while on a call with LTE even though sprint says it should work and according to the specs it should work? is this my phone or a setting that sprint has not turned on?
Thanks guys
gitit20 said:
Hey guys I have read searched and did not find this info anywhere so sorry if its is posted some place else...
The Problem - No LTE data during a phone call.
How do we enable this?
I have hard reset and all that other stuff but I simply can not get data to work while on a call with LTE even though sprint says it should work and according to the specs it should work? is this my phone or a setting that sprint has not turned on?
Thanks guys
Click to expand...
Click to collapse
Simultaneous voice and data is not possible unless you're on Wifi. It's a limitation of the phone hardware itself.
gitit20 said:
Hey guys I have read searched and did not find this info anywhere so sorry if its is posted some place else...
The Problem - No LTE data during a phone call.
How do we enable this?
I have hard reset and all that other stuff but I simply can not get data to work while on a call with LTE even though sprint says it should work and according to the specs it should work? is this my phone or a setting that sprint has not turned on?
Thanks guys
Click to expand...
Click to collapse
Well yes the phone will support VoLTE - but I do not believe the networks have launched this feature yet. It may be something that would be released as an OTA to update the radio firmware, but it might be a little ways away for this.
Thanks for the info i now know its not a hardware limatation as its a listed feature. I was just wondering if there was a trick to it... I will tell call sprint and see what they say...
born_fisherman said:
Well yes the phone will support VoLTE - but I do not believe the networks have launched this feature yet. It may be something that would be released as an OTA to update the radio firmware, but it might be a little ways away for this.
Click to expand...
Click to collapse
I was just wondering the same thing. On my Note 2 I was able to access data while on a call but not on the G2. I hope there is a fix for it because that bull that it can't be accessed when other phones can.
Sent from my LG-LS980 using xda app-developers app
There is no SVLTE (simutaneous voice w/ LTE) on this device. The function was removed with the introduction of Tri-Band LTE devices.
The latest phone that supports SvLTE is the Note 3, but you lose the Triband functionality.
As this is true, it is a feature of the other variants of the LG G2, Sprints version uses a different chipset and therefore does not support simultaneous voice/data.
http://www.fiercewireless.com/story/sprints-tri-mode-lte-smartphones-dont-support-simultaneous-voice-and-data/2013-11-19

SM-N9005 - No 4G LTE.

Hello guys. I have a long story for you, but I am just gonna keep it very short.
I've had trouble with 4G LTE on TWO Galaxy Note 3's.
I got my first one about 4 months ago, then I got a new device about 1 month exactly because of 4G not working.
However, it is still not working.
My first phone was 100% stock, never rooted and never played with. So was my 2nd phone, and LTE still didn't work. However, it's rooted with CM11 nightly with temasek kernel on it right now, and still no 4G LTE.
I've talked a lot with my carrier (Telenor DK, Denmark) and they sent me a new SIM-card, which did not work help with the missing LTE either. I just called them again today and they double checked everything and told me that I was totally ready to go with 4G LTE.
(The location is not the problem as I've been VARIOUS places with no connection to 4G.)
All the network options are as they should be, etc. However there is still NO 4G LTE.
I then started to read on a lot of posts from this forum, and I may have come to the conclusion that my phone has different frequencies or different LTE bands than my country has? I'm not sure, but I THINK that my carrier (Telenor Denmark) uses 800mhz band.
I don't know if Cat4 is some american only standard or so? I'm not sure, I hope you guys can help.
This is what it says on the box: http://i.imgur.com/JLSrR0b.jpg?1
There is also the european certifcation sticker on the front: http://i.imgur.com/jTxqtzS.jpg?1
You won't be able to see it, but it is a shiny/glittering sticker that says "Approved for Nordic Operators" and as you might have guessed, I live in Denmark.
And at last, some screenshots of the phone: http://imgur.com/a/IHs5N - As you can see, LTE and everything is checked.
I'm not really sure what I can do more. I hope you guys have any idea of what the cause of me not being able to have 4G LTE network.
Many thanks!
Perhaps your issue may be similar to:
http://forum.xda-developers.com/showthread.php?t=2693022
You could try tinkering with your APN.
Found this online but I'm not sure if it's completely accurate:
APN Name: Telenor
APN: internet
MMSC: http://mms.telenor.dk
MMSC proxy: 212.88.64.8
MMS port: 8080
via http://www.nowsms.com/mobile-operator-mmsc-settings
Expliciate said:
Perhaps your issue may be similar to:
http://forum.xda-developers.com/showthread.php?t=2693022
You could try tinkering with your APN.
Found this online but I'm not sure if it's completely accurate:
APN Name: Telenor
APN: internet
MMSC: http://mms.telenor.dk
MMSC proxy: 212.88.64.8
MMS port: 8080
via http://www.nowsms.com/mobile-operator-mmsc-settings
Click to expand...
Click to collapse
Thanks for your reply.
I should have mentioned, that I already tried to play with exact these settings, without luck.
However, I did it again since it had been a long time, and sadly again no luck.
The APN settings seems to be correct set up by default.
EDIT: I have a feeling it's because my LTE radio doesn't run the right frequency/mhz. Is there anyway that I can check if that's the problem?
And for clarity, I have never seen the 4G logo on my phone. My connection is 3G / H+ 50/50 of the time.
TjabbyD said:
Thanks for your reply.
I should have mentioned, that I already tried to play with exact these settings, without luck.
However, I did it again since it had been a long time, and sadly again no luck.
The APN settings seems to be correct set up by default.
EDIT: I have a feeling it's because my LTE radio doesn't run the right frequency/mhz. Is there anyway that I can check if that's the problem?
And for clarity, I have never seen the 4G logo on my phone. My connection is 3G / H+ 50/50 of the time.
Click to expand...
Click to collapse
Telenor Denmark uses 1800Mhz for its LTE network so it should be compatible as you are using a Note 3 N9005 as listed on GSMArena Note 3.
Expliciate said:
Telenor Denmark uses 1800Mhz for its LTE network so it should be compatible as you are using a Note 3 N9005 as listed on GSMArena Note 3.
Click to expand...
Click to collapse
Okay thanks! great to have that out of the way.
Now, I'm just asking out of curiousity.
What does the Cat4 on the box in the LTE section mean? Could it be anything with that?
Does that mean Band 4? .. Because it looks like Telenor uses band 3? Now. I have no idea what I am talking about and if this really matters, but please correct me if I am wrong.
EDIT: Also, my phone has a 4G logo on the back of the slim case you get with it. I've heard some people say that it's only the american models that get these?
It looks like this: http://goo.gl/UUJXCK - It says 4G in the middle where it says Galaxy Note 3 on this one.
EDIT: Pictures of my DEFAULT APN settings.
APNs: http://i.imgur.com/ckBC0kP.png
Telenor Internet: http://imgur.com/a/DibpB
Telenor DK MMS: http://imgur.com/a/aH2Wd
I am not QUITE sure, but to me they look correct. Please take a close look at them and tell me if I am missing anything. Thanks a lot!
TjabbyD said:
Okay thanks! great to have that out of the way.
Now, I'm just asking out of curiousity.
What does the Cat4 on the box in the LTE section mean? Could it be anything with that?
Does that mean Band 4? .. Because it looks like Telenor uses band 3? Now. I have no idea what I am talking about and if this really matters, but please correct me if I am wrong.
EDIT: Also, my phone has a 4G logo on the back of the slim case you get with it. I've heard some people say that it's only the american models that get these?
It looks like this: http://goo.gl/UUJXCK - It says 4G in the middle where it says Galaxy Note 3 on this one.
EDIT: Pictures of my DEFAULT APN settings.
APNs: http://i.imgur.com/ckBC0kP.png
Telenor Internet: http://imgur.com/a/DibpB
Telenor DK MMS: http://imgur.com/a/aH2Wd
I am not QUITE sure, but to me they look correct. Please take a close look at them and tell me if I am missing anything. Thanks a lot!
Click to expand...
Click to collapse
I believe Cat 4 is just a hardware standard indicating peak datarates.
Try selecting the mms apn rather than the internet one and see if that changes anything.
I had a similar issue with Telus not receiving internet till i switched from the isp.telus apn to sp.telus apn.
Worth a shot i guess.
Expliciate said:
I believe Cat 4 is just a hardware standard indicating peak datarates.
Try selecting the mms apn rather than the internet one and see if that changes anything.
I had a similar issue with Telus not receiving internet till i switched from the isp.telus apn to sp.telus apn.
Worth a shot i guess.
Click to expand...
Click to collapse
Thanks a lot for your help. Well I can't select the Telenor DK MMS like I can select the internet one. If you look at the picture there is a blue check mark at the internet one which the mms one doesn't have. If I click on the MMS one it just takes me to the settings. I hope it makes sense. Thanks.
TjabbyD said:
Thanks a lot for your help. Well I can't select the Telenor DK MMS like I can select the internet one. If you look at the picture there is a blue check mark at the internet one which the mms one doesn't have. If I click on the MMS one it just takes me to the settings. I hope it makes sense. Thanks.
Click to expand...
Click to collapse
Oh, ummm.
You could try to edit the internet one to be identical to the mms settings. If anything, you can just revert it back to the internet settings if it doesn't help.
Expliciate said:
Oh, ummm.
You could try to edit the internet one to be identical to the mms settings. If anything, you can just revert it back to the internet settings if it doesn't help.
Click to expand...
Click to collapse
I have tried to do that multiple times without any luck at all.
I will try to do it in a few minutes just in case, however it never seems to help. The only thing that happens is that my mobile connection drops for about 20 seconds then comes back as the usual 3G / H+.
EDIT: I played around with the APN settings again, for about 1 hour, still with no luck.
So I'm stuck here as of now. I've tried everything mentioned in this thread and nothing works.
I am not sure what is wrong. I hope any of you might have more possible solutions for my LTE problem on my SM-N9005.
Thanks.
TjabbyD said:
So I'm stuck here as of now. I've tried everything mentioned in this thread and nothing works.
I am not sure what is wrong. I hope any of you might have more possible solutions for my LTE problem on my SM-N9005.
Thanks.
Click to expand...
Click to collapse
I'm sure that your APN settings are wrong... they are wrong by default sometimes. 2G and 3G is working for you, right? If yes, than it's the problem with settings. Try to copy APN setting from someone who has a phone with working 4G ( and is the same carrier as you ).
hrvoje334 said:
I'm sure that your APN settings are wrong... they are wrong by default sometimes. 2G and 3G is working for you, right? If yes, than it's the problem with settings. Try to copy APN setting from someone who has a phone with working 4G ( and is the same carrier as you ).
Click to expand...
Click to collapse
I've been thinking the same. Perhaps I'm doing it wrong or something, because I've tried to change the settings so much. I don't have access to a 4G phone on the same carrier, neither does any of my friend use my carrier (atleast I think so) - so I will do some more internet research.
Again, thanks a lot for your help, friend!
EDIT: I've found some totally different Telenor APN settings than I've ever seen before. I'm not sure if they're old or not, but I'll definitely try now and report back.
TjabbyD said:
I've been thinking the same. Perhaps I'm doing it wrong or something, because I've tried to change the settings so much. I don't have access to a 4G phone on the same carrier, neither does any of my friend use my carrier (atleast I think so) - so I will do some more internet research.
Again, thanks a lot for your help, friend!
EDIT: I've found some totally different Telenor APN settings than I've ever seen before. I'm not sure if they're old or not, but I'll definitely try now and report back.
Click to expand...
Click to collapse
Then try to call your carrier service, and request that they tell you all of APN settings. Try every one of them. I had exactly the same problem, they were sending me bad APN settings. They were also telling me that everything is good on their side with network, and that my phone is broken. So don't believe them, you probably know more about technology than 90% of workers there
hrvoje334 said:
Then try to call your carrier service, and request that they tell you all of APN settings. Try every one of them. I had exactly the same problem, they were sending me bad APN settings. They were also telling me that everything is good on their side with network, and that my phone is broken. So don't believe them, you probably know more about technology than 90% of workers there
Click to expand...
Click to collapse
I tried with the ones I found, and they do not work.
I took your advice and tried to call them once again, but what they told me is already what the default APN is, like in my pictures from my previous post.
I'm still lost without LTE.
TjabbyD said:
I tried with the ones I found, and they do not work.
I took your advice and tried to call them once again, but what they told me is already what the default APN is, like in my pictures from my previous post.
I'm still lost without LTE.
Click to expand...
Click to collapse
I don't know if your telco does this but Telstra in Australia will send a system message that will save the correct APN settings into your phone. This can be initiated by you through their internet site, no call center staff to stuff things up... You receive the message like a normal sms but when prompted install and save...
Might be worth a shot to either ask to be sent the settings or see if they do the same on their website... You might be lucky...
ultramag69 said:
I don't know if your telco does this but Telstra in Australia will send a system message that will save the correct APN settings into your phone. This can be initiated by you through their internet site, no call center staff to stuff things up... You receive the message like a normal sms but when prompted install and save...
Might be worth a shot to either ask to be sent the settings or see if they do the same on their website... You might be lucky...
Click to expand...
Click to collapse
It seems like they do not offer such service. However I looked at some APN setup guide on their website, and it is 100% identical to what my APN's look like.
Hmm. As stated before, 3G and HSPDA, HSPDA+ works perfectly. But no 4G/LTE. Never.
I'm sorry for double posting, but I've got some news. (I think.)
So, someone told me that I should try to dial *#*#4636#*#* and put up screenshots of it, so I figured out that I should put them here too.
So when I dailed *#*#4636#*#*, I got to this screen: http://i.imgur.com/nvEQqUF.png
I then chose phone information, and I got here: http://i.imgur.com/TTPAHw5.png - Notice that H+ is working fine.
Then I tried to select LTE only, and this happened: http://imgur.com/eNfl4xk - No signal from LTE at all.
I'm not sure if this is anything new, but I thought I'd show it here too.
Thanks.
EDIT: Okay, so I've made some further investigation and some people tell me that I might have the wrong CSC number for my country. However, I have no idea what that means really. Is it possible for me to "flash" the
correct CSC number onto my phone or something like that?
EDIT: I'm going to flash STOCK Nordic 4.4.2 ROM and solve the issue there, I've heard some talking about I should do that first. I will report back if I find my solution. Thanks.
Hello again.
I haven't really been doing anything to search further, but I am still left with no LTE, the flash of the 4.4.2 stock nordic rom did not help.
Just thought I'd give a little update.

APN and Data issue?

Hi guys, my S7 Edge is working beautifully, the only problem that I have is that right now for Spring Break I'm staying over at my mom's place, and the data here sucks. Although, it says I have 4G LTE with 3-4 bars, some online games say I have no data, and websites take forever to load. I was thinking about changing my APN from my old phone over to this one, but I'm not sure if that would make it worse? I remember reading these forums in anticipation while I was waiting for my phone to arrive, and I remember someone had mentioned something about changing an "IPV4 to IPV6"? However, when I checked, mine is already switched to IPV6? Not sure if that will make a difference or not...any suggestions?
Edit: I'm on T-Mobile by the way.
Not many ISP's support IPv6 in my country, I read about your issue too but my conclusion was you should disable IPv6 and just let it run on IPv4. Only thing I don't know is if you do this change in your phone or on your router. If you are sure your ISP supports IPv6 than ignore my comments.
btw, I thought IPv4/6 has to do with Wifi only, not 4G or LTE.
Juuls said:
Not many ISP's support IPv6 in my country, I read about your issue too but my conclusion was you should disable IPv6 and just let it run on IPv4. Only thing I don't know is if you do this change in your phone or on your router. If you are sure your ISP supports IPv6 than ignore my comments.
btw, I thought IPv4/6 has to do with Wifi only, not 4G or LTE.
Click to expand...
Click to collapse
I thought the contrary lol. I thought it had to do with 4G or LTE, which is why I was confused when you mentioned about me having to change something in my router Hopefully other people can shed light on this as well
Leelouster said:
I thought the contrary lol. I thought it had to do with 4G or LTE, which is why I was confused when you mentioned about me having to change something in my router Hopefully other people can shed light on this as well
Click to expand...
Click to collapse
A quick google search revealed it has to do with both Sorry if I caused any confusement.
Juuls said:
A quick google search revealed it has to do with both Sorry if I caused any confusement.
Click to expand...
Click to collapse
Lol it's okay, thanks a lot though Juuls

Categories

Resources