mods close thread! - Nexus S General

fix does not work.

Is that force roaming to Vz? Maybe you started getting spotty Sprint ownwd EVDO coverage. Forcing 3g only could be putting you on Vz towers.
Sent from my Nexus S 4G using Tapatalk

Doesn't EVDO Only disable voice calls?

This would also be a good way to save battery without losing all data connectivity.
3G/EVDO uses a lot of power. If you switch this setting to CDMA only you will force the phone to only use 1x. The data rates will be slower, but acceptable enough for most notifications and light things like facebook.
CDMA - 2G/1X Slower Data greater battery life
EVDO - 3G/EVDO Higher speed data, battery hog.

Maximilian Mary said:
Doesn't EVDO Only disable voice calls?
Click to expand...
Click to collapse
Yep. Your phone shouldn't even ring doing his "fix".
Sent from my Nexus S 4G using Tapatalk

Award Tour said:
Is that force roaming to Vz? Maybe you started getting spotty Sprint ownwd EVDO coverage. Forcing 3g only could be putting you on Vz towers.
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
I dont think it is.
I have my phone set to Home network only. doing this boosted my signal from 1 bar (-90,-100dBm) to a full signal (-65dBM) it clearly says Sprint CDMA EvDo Rev. A in connection status.
Thank you very much =D

styckx said:
Yep. Your phone shouldn't even ring doing his "fix".
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Yep that is correct. Just tested it...
Hybrid OR CDMA only are the only options you should choose here folks.
CDMA only WILL produce battery life savings though. Your data will be slower then molasses rolling uphill in December BUT it will be sufficient for emails.
It's a very nice find either way just on that fact alone. Back in the motorola days this was a very popular battery saver mod. Disabling EVDO and forcing it to always be 1X.

styckx said:
Yep. Your phone shouldn't even ring doing his "fix".
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
hehe.... you are correct sir... going back to old ****ty service again so i can get phone calls

The EVDO radio and CDMA radio are two different radios I believe.
When you put EVDO only you're probably seeing JUST your 3G signal which might appear stronger.
CDMA only you're seeing just your 1x/voice/sms signal.
Hybrid the signal bars I'm sure just average the two out...
That's how I "think!" it works... could be way wrong.

Well at least i tried since sprint is dragging their heels. We need a new radio and quick.

fixxxer2008 said:
Well at least i tried since sprint is dragging their heels. We need a new radio and quick.
Click to expand...
Click to collapse
I wouldn't be surprised if a new PRL fixes this... seems to be area specific, I have great signal for the most part...

Also, fixxer, I know you've been having horrid battery life. I'm sure the low signal is causing this as the lower the signal the more power the radio is going to be given to try and maintain the signal.
Try CDMA only and use WiFi whenever you can (also be sure to set WiFi sleep policy to never). 1x uses significantly less power then 3G... although it's to slow to be downloading big apps or loading really complex web pages, it would however be great for general notifications. Give it a shot and let me know if it helps your battery at all!

fixxxer2008 said:
Well at least i tried since sprint is dragging their heels. We need a new radio and quick.
Click to expand...
Click to collapse
Hey, it can still work as a temporary solution for some people. I'm close to saying "Dagnabbit, I don't care if I get calls. I want to listen to twit live!" GV notifications should still work, anyway.

getprop ril.MSL
Click to expand...
Click to collapse
in adb shell or terminal emulator will kindly reward you with your MSL

TheDub said:
I wouldn't be surprised if a new PRL fixes this... seems to be area specific, I have great signal for the most part...
Click to expand...
Click to collapse
yeah, I'm doing pretty great on signal.
Sent from my Nexus S 4G

Could be a prl but i still think it needs a radio. This phone is set to wcdma when it should be cdma auto prl. Hopefully we get a fix or ota soon. My battery is better today since i flashed a stock rom and kernel. Not great but better.

I gave the CDMA-only option a shot, no incoming phone calls at all. Switched instead to EVDO only, and calls seems to be coming through better in an area where I had maybe 50% success rate for incoming calls when running unmodified. I'll leave it here for awhile, so I know when someone is actually trying to call me.
This is horribly frustrating, I suffered with poor AT&T service for years for the iPhone and never thought I'd be wishing I hadn't changed carriers. I could maybe justify the shoddy call coverage if data was at least fast, but it's not. I'm giving this another week, and going for a return and possibly switching carriers again.

CDMA only setting for calls/texts paired with 4G for data seems to work pretty well.
Since EVDO only mode seems to prevent receiving calls.
True test will be when I get home, 1930's brick building that has been raising hell with calls.

fixxxer2008 said:
Well at least i tried since sprint is dragging their heels. We need a new radio and quick.
Click to expand...
Click to collapse
Didn't someone else come up with this potential fix and post it in the Sprint Community Forum?

wirelessness said:
Didn't someone else come up with this potential fix and post it in the Sprint Community Forum?
Click to expand...
Click to collapse
and i never said i wrote it, i put it here for you guys. i did however test it for this guy early this morning. were all trying to find a temp fix until the companies get off their asses.

Related

Sprint's 4g connection not stable...

Im in the northern chicago area and I'm able to connect to 4g but the connection is slow and unstable...(even with 4 bars). Ive extended the idle time using ##data# but still I have the same issues??? Anybody with a solid connection care to share their ##data# settings? Im thinking the issue might in the settings......
Sent from my PC36100 using XDA App
I'm in Seattle and see similar 4G behavior. Usually 2 bars or so and not great performance (marginally better than 3G). I'd be interested to see if this can be improved by tweaking the settings also.
the 4G antenna in the EVO is half the size of the USB one, I don't even get signal at my house on my EVO, yet I get 1.5MBs on my USB stick. Size matters.
Idk about 4G but i just moved into a new house and i have TERRRIBLE reception no matter where i am. If im not outside, it sucks. Its funny though, as soon as i step out the door, 5-6 bars. Im keeping the phone in hopes that as soon as they get 4G around here (Elmont, NY... Long Island), things will change. =\
sprints 4g is in a horrible part of the spectrum. it's frequency is too high to pass through anything
This thread does not belong here. Take this drivel to the appropriate subforum.
unless you are a running a stock rom with the latest updates, i don't think you can make any of these complaints that you all are unless 4g isn't fully up and running in your city. My girlfriend just got the white evo and we installed the latest updates and she gets a very good 4g signal, i have the black evo running fresh 0.5.3 and i get a pretty good signal myself. Not to mention we live in mpls and 4g isn't even officially here yet. A lot of these problems people are having are user errors, flashing things with no knowledge of what they are doing. I would say go back to stock do to ota update with the new radio and wimax enhancements then tell me what type of 4g coverage you are getting. otherwise you are just trusting the chef that everything is set up right which i would take with a grain of salt because non of them seem to understand exactly how the wimax radio works as of yet. Proof of this is all the problems people are having after trying numerous roms
BB15 said:
I'm in Seattle and see similar 4G behavior. Usually 2 bars or so and not great performance (marginally better than 3G). I'd be interested to see if this can be improved by tweaking the settings also.
Click to expand...
Click to collapse
That's not very encouraging, I am very disappointed by Sprint's 3g speeds. I have yet to see over 1mbs, and over the 4th of July weekended saw .2-.7 mbs. Yes, .2 as in 192kbs. This was in Miami.
vespoli said:
This thread does not belong here. Take this drivel to the appropriate subforum.
Click to expand...
Click to collapse
I started this thread with the intentions of looking into the settings of the wimax ##data# menu....not too rant about the service. I believe with the good signal I'm getting and the fact that I do connect shows that there's an issue with either the roms were flashing or the setting mentioned above. Anybody care to post their settings?
Sent from my PC36100 using XDA App
Changing the wimax idle sleep time from 10 secs to 300 secs could help. My 4G stays on pretty much constantly now instead of switching back and forth between 4G and 3G. You would need your MSL to edit the settings though.
I have similar issues in the chicago land area as well. Very frustrating. I am using a stock rooted rom, but I am using an older OTA update. When I'm outside I always have a strong 4G signal. However, as soon as I go in doors I either loose the signal or have a very weak one. Before you say anything about updating, my GF's EVO is completely stock with the newest OTA update and her 4G behaves very similarly. I actually pick up a better signal at times. It just sucks because if the signal was just a LITTLE bit stronger I would be really happy.
Thats just due to the spectrum used for wimax is at such a high frequency that it does not penetrate walls very well. I'm not sure how sprint will try to remedy this problem, I'm not sure but I get strong signals at my work office and thats inside a building. At home I can get 4G if I am outside once inside I cant seem to get it at all.
What's "##data#" ? I would search it but haven't quite figured it out yet on the app. Google didn't help either (surprisingly).
Sent from my PC36100 using XDA App
jrpointer said:
Im in the northern chicago area and I'm able to connect to 4g but the connection is slow and unstable...(even with 4 bars). Ive extended the idle time using ##data# but still I have the same issues??? Anybody with a solid connection care to share their ##data# settings? Im thinking the issue might in the settings......
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
jr - I am in Gold Coast and recently noticed the 4G signal was junk. It used ot be great inside my 13th floor apartment. I went to the sprint store and they said one of the towers was being serviced (they called a tech. and he said this while I was there). They said end of this week it would be fixed. I was going to give them another week or so and see what the deal is then.
IMO it kind of defeats the purpose of having 4G then. 90% of the time that I want to surf the internet or use 4G I'm indoors, and I would imagine that goes for pretty much everybody. I know this isn't a problem for everybody so it seems, but I think for a lot of people it is.
interesting you say 4 bars of 4g. when i look at my phone i can get up to 6 vertical bars for 3g's signal strength, but with 4g on, and outside i can get 3 "bars" more like "upper wifi arcs" above the 4g signal. and inside my 4g doesn't even register anything, it just shows 4g with no arcs...
however my technique is to put the phone right next to the window and run my micro usb cable from there to my computer. and i then get great data connection...
still experimenting, (had the phone for less than a week) but i think it might work better to go to menu/settings/wirless&networks/ and uncheck mobile network so the phone doesn't use the 3g for data connection when 4g isn't there...
thus if the 4g signal is low, it doesn't drop it to grab the higher signal 3g...
lastly. i'm heading to the store to try to pick up a 2 buck plastic soap dish with a suction cup for the "high tech holding station" on my window. that and a 10 foot micro usb cable i think that will help even more...
best of luck.
I have figured out where in my neighborhood I can get a 4G signal (and I too keep my phone near the window when I want to use it at home). However since the OTA, I noticed that if my 4G signal drops it won't come back unless I toggle the 4G radio. It will just sit in "scanning" and use 3G.
Anyone else noticing this problem?
I would assume that one of the settings/timers need to be tweaked, but I have no idea what my those values were before the OTA.
oreoOozZz said:
Idk about 4G but i just moved into a new house and i have TERRRIBLE reception no matter where i am. If im not outside, it sucks. Its funny though, as soon as i step out the door, 5-6 bars. Im keeping the phone in hopes that as soon as they get 4G around here (Elmont, NY... Long Island), things will change. =\
Click to expand...
Click to collapse
4G has nothing to do with 3G. Clearwire maintains the 4G network and Ericsson maintains the 3G/1X network do if your 3G is bad now, it won't be any different when 4G launches unless Ericsson improves the situation.
If I'd got this device predominantly for 4G...Id've returned it in day one...(IN Chicago also). In fact wouldn't have bought it going in knowing what I knew about the spottiness of tapping into 4G frequency wirelessly.
that makes absolutely no sense.
per your words, 4G has nothing to do with 3G as in Clearwire has nothing to do with Ericsson so what would it matter if Ericsson decided to step its game up if Clearwire is the 4G company?
4G is on a whole different frequency not to mention a whole different tower technology and tower location possibly so there's definetly a good chance that I can maintain a great 4G signal once it arrives in my area compared to the terrible 3G coverage I get.
well see what happens... my luck they will never put 4G by me lol.

[Q] Is it possible to use data on the phone while on a voice call?

Long time AT&T customer probably switching to Sprint, been eyeing the Epic..
If I get a voice call, is it possible (if I'm using a BT headset or speakerphone) to fire up a web browser on it and use that while I'm in-call? To look things up, or whatever?
If it can't do that, are there any other Sprint phones that can (EVO, for example?)
Thanks!
if i remember right, you can use data and voice only when you are connected onto 4G and WIFI, but not 3G. i have not tested this out yet to confirm but i remember reading that somewhere if i read it right. i also came from att (iphone) and being able to use data (3G) and voice at the same time was a major plus. ill have to try it out though later on my epic.
Yes u can use data while on a call only if you are on WiFi or 4g. Tested and verified.
Sent from deep in a volcano using XDA App
Well, drat. Thanks fellas. Not that I do that very often, but it does come in handy. I checked and EVO "suffers" from the same problem.
Again, thanks, that's handy to know.
Its a cdma limitation, not a device one. Both sprint and verizon have this issue.
Aridon said:
Its a cdma limitation, not a device one. Both sprint and verizon have this issue.
Click to expand...
Click to collapse
Some might say it is a "limitation", however is it the reason why cdma networks do not suffer from dropped calls like gsm networks do.
For more information, you can check out this rather lengthy post about why cdma is better than gsm.
yeah, i experience the same thing. it's becoming pretty much a deal breaker for me, as often i am on the phone for an hour or more and am trying to look things up at the same time. no joy. plus the abysmal battery life has me glad that i am still in the 30 day window ?; i like the phone a lot otherwise. wish i could get it for ATT. i have never had problems with their service, and would love to be able to talk and surf at the same time.
On 3g only voice.
On 4g voice n data simultaneous
Sent from my Epic
remedy22 said:
Some might say it is a "limitation", however is it the reason why cdma networks do not suffer from dropped calls like gsm networks do.
For more information, you can check out this rather lengthy post about why cdma is better than gsm.
Click to expand...
Click to collapse
+1 you can thank the iPhone and this great "feature" for the ****ty network over at ATT

Force 3g over 1x

My epic keeps flipping from 3g to 1x and I'm even using amplifier. My touch pro 2 had a app that forced 3g only. I really hope there is a way to do this with the epic 4g. I'm sure there is, but it's way above what I know about phones. If anyone knows of anyway to do this, please let me know.
1x means its roaming. If its switching between 3g and 1x, your phone is trying to find a strong signal.if it keeps going to 1x, you have a weak sprint signal and its roaming onto verizon.i have this problem at work,and it drains the battery quick.i use the app "roam control" to set my phone to roam only to save battery.hope this helps
shortyboy said:
1x means its roaming. If its switching between 3g and 1x, your phone is trying to find a strong signal.if it keeps going to 1x, you have a weak sprint signal and its roaming onto verizon.i have this problem at work,and it drains the battery quick.i use the app "roam control" to set my phone to roam only to save battery.hope this helps
Click to expand...
Click to collapse
1x is not roaming. It is what we had before 3g. Older towers.
Sent from my SPH-D700 using XDA App
ski21 said:
My epic keeps flipping from 3g to 1x and I'm even using amplifier. My touch pro 2 had a app that forced 3g only. I really hope there is a way to do this with the epic 4g. I'm sure there is, but it's way above what I know about phones. If anyone knows of anyway to do this, please let me know.
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/sprint-epic-4g/144706-force-3g-only.html#post2116841
Get your MSL
Easy way to get your MSL #
Then type: ##33284#
type in your MSL
others->HDR 1x->Evdo only
marcusant said:
1x is not roaming. It is what we had before 3g. Older towers.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
You can't use 3G while roaming on Verizon towers. The best you can use is 1x.
LunaticWolf said:
You can't use 3G while roaming on Verizon towers. The best you can use is 1x.
Click to expand...
Click to collapse
Not true at all. 01115 and greater prls have 3g roaming on verizon in some states.
Thanks
Sent from my SPH-D700 using XDA App
so wait when i do this what exactly does this do? because i just did it and in my house i usually only got 3 bars now i have full bars. Does it go off another carriers towers or what?
And also no matter what i still cannot update my prl...Keeps giving me an error...
I remember on the TP2, if you went/forced "EVDO ONLY" you lost voice/text since they operate on 1x don't know if it is the same for the Epic.
Ah,cool...didnt know about the 1x thing..thanx
Ps.confirmed 3g roaming with 01120 prl here in honolulu,hi
Sent from my SPH-D700 using XDA Premium App
Another cool thing the tp1 and mogul did...tp2 didn't have evdo only option... when your forced it to evdo only it would search and connect to 3g networks that were not even in the prl. 3g roaming on vzw way back in the day
digiblur said:
Not true at all. 01115 and greater prls have 3g roaming on verizon in some states.
Click to expand...
Click to collapse
You only get those PRLs with a business account, so its true for the average user.
OK well i did the above now when i try to send text mesages or anything on wifi it is failing and won't let me do it. So whats going on?
LunaticWolf said:
You only get those PRLs with a business account, so its true for the average user.
Click to expand...
Click to collapse
Discounted accounts, not business accounts. Lots of people take advantage of the 5-20% discount on their Sprint account.
So noone knows why it was doing this?
tcooper85 said:
So noone knows why it was doing this?
Click to expand...
Click to collapse
Poor signal quality(not strength)..problems with towers...could be many things.
Thanks guys, I got my msl and did that now it stays on 3g. It is working great. I'm going to try flashing different modems to see which one works the best at my house. Thanks again.
I only needed to do this because my phone would want to keep going to 1x, which I guess is the strongest signal at my house. My 3g signal is only 2bars at best, where as 1x is 3-4 bars, but for using internet service 1x sucks. Thanks again guys.
digiblur said:
Poor signal quality(not strength)..problems with towers...could be many things.
Click to expand...
Click to collapse
Well I had full bars and I was on wifi at first then took off wifi to go to 3g andit was still failing as soon as I switched it back to both it started working agaain. So I don't know
ski21 said:
Thanks guys, I got my msl and did that now it stays on 3g. It is working great. I'm going to try flashing different modems to see which one works the best at my house. Thanks again.
I only needed to do this because my phone would want to keep going to 1x, which I guess is the strongest signal at my house. My 3g signal is only 2bars at best, where as 1x is 3-4 bars, but for using internet service 1x sucks. Thanks again guys.
Click to expand...
Click to collapse
Just remember your phone needs 1x to receive voice and sms.
digiblur said:
Discounted accounts, not business accounts. Lots of people take advantage of the 5-20% discount on their Sprint account.
Click to expand...
Click to collapse
idk I'm in honolulu, have a discount, and got 60679 prl

PRL 60080

Has anyone else had significant trouble with service after receiving this update? My battery life is much worse (16-24 hours down to 8-10 hours), and I frequently have to restart my phone to send/receive messages.
Nope but i dont see how a prl could harm to that extent?
Sent from my SPH-D700 using XDA App
CrfEpic4g said:
Nope but i dont see how a prl could harm to that extent?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Of course it can. Looking for towers will kill your battery.
Sent from my SPH-D700 using XDA App
Since 60680 my 3G speeds are slower, I am in 1x more often and roaming in areas I never roamed before and 4G doesn't always reconnect after entering a 4G area. Battery life is slightly down as well.
Service Area: Central NJ from Edison to the Jersey Shore Asbury/Point Pleasant)
Yeah, batter life sucks now and tws is going through the roof (stock EC05). I've been having reception issues too. I've been missing a lot of calls where I've never missed them before. And for some reason my voicemail notifications are different too. Now I only get text message notifications (not sure if it's all related, though)
I got a no service icon in an area that always used to get decent roaming.
My 3G is all messed up.... not working
Not sure if this is due to a refurbished phone I just received from Asurion.. already talked to Sprint for over 1 hour and nothing
On the phone with them...
My battery life seems to have decreased since the update as well but I don't have any numbers to verify that.
prl 11114 doesn't seem to have this issue. I have installed it and have noticed an increase in batt life. Maybe something is up with the 60080 prl. BTW best modem for me so far is EE03.
PRL means "Preferred Roaming List". This allows you to roam off other networks towers in which Sprint has an agreement with. It's only for roaming people. So if your still in your home area where you have Sprint service, you are not going to be roaming. PRL does not affect battery life, call quality, signal ect. Put it this way....If our phones did not have a PRL, we would not be able to roam. That is all.
cbs518 said:
PRL means "Preferred Roaming List". This allows you to roam off other networks towers in which Sprint has an agreement with. It's only for roaming people. So if your still in your home area where you have Sprint service, you are not going to be roaming. PRL does not affect battery life, call quality, signal ect. Put it this way....If our phones did not have a PRL, we would not be able to roam. That is all.
Click to expand...
Click to collapse
I know what prl stands for. However, if the "preferred" roaming list assigns higher preference to towers with less signal than previous, it would make total sense for battery life to be affected, as more time would be spent searching for a stronger signal. My office is in a lower level, and service is 1 bar at best, typically roaming. Also, as another user stated, TWS has increased significantly.
henboffman said:
I know what prl stands for. However, if the "preferred" roaming list assigns higher preference to towers with less signal than previous, it would make total sense for battery life to be affected, as more time would be spent searching for a stronger signal. My office is in a lower level, and service is 1 bar at best, typically roaming. Also, as another user stated, TWS has increased significantly.
Click to expand...
Click to collapse
It doesn't give your preference of other towers. It isn't a list of towers.
The funniest comment I heard was it affected 4G.
austin420 said:
Of course it can. Looking for towers will kill your battery.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
only when your roaming ..... so it doesnt affect it really
http://forum.xda-developers.com/showthread.php?t=1175032
Talk about it here

HTC U11 AT&T support and collection

this is going to be an AT&T specific collection thread for this carrier specific stuff like VVM and try to make wifi calling work, also users can ask any questions related to AT&T and I will try to answer them and hopefully other users can help to.
HTC lying about AT&T "compatibility"
U11 does not support VoLTE on AT&T
U11 does not support WiFi-Calling on AT&T
U11 does not support Video Call on AT&T
U11 does not support Integrated Visual Voicemail on messages app like it use to on HTC One M7, M8 & M9, you need the stand alone app which is crap...
the phone works for calls data LTE works MMS haven't test yet I don't use them....
Any comment from AT&T on any of this? We know HTC's saying it works.
bassoprofundo said:
Any comment from AT&T on any of this? We know HTC's saying it works.
Click to expand...
Click to collapse
Haha, AT&T never comments on these things.. and it won't work.. I have and unlocked GS8 and it don't work there either.. so no way in #[email protected] it will work on HTC..
Argh... This sucks. I'm in an area where coverage quality has dropped significantly, and I spend a lot of time in a building where almost no signal gets through from any provider. Wifi calling and texting has become a lot more important for me for that reason. I can get by without the extra features, but it's tough now what I've had them (currently using an S7 edge and Note 5).I guess that leaves me with no option but Samsung or LG (and all of the provider bloatware).
https://twitter.com/CrowsnestIT/status/874728832468746240
The results of my time and effort with both AT&T and Verizon and a chat with HTC : View attachment 4181945
Don't activate the U11 on AT&T, once their computer "knows" you have an uncertified device you lose LTE data and are forced onto HSPA+!
Does anyone know an APN setting that will reactivate LTE?
longdongsilver said:
Don't activate the U11 on AT&T, once their computer "knows" you have an uncertified device you lose LTE data and are forced onto HSPA+!
Does anyone know an APN setting that will reactivate LTE?
Click to expand...
Click to collapse
Here
JEANRIVERA said:
Here
Click to expand...
Click to collapse
Here
JEANRIVERA said:
Here
Click to expand...
Click to collapse
Weird. Your icons are not same as mine. Are you 4G (HSPA+) or 4G LTE? My APN settings don't have a field for APN protocol
longdongsilver said:
Weird. Your icons are not same as mine. Are you 4G (HSPA+) or 4G LTE? My APN settings don't have a field for APN protocol
Click to expand...
Click to collapse
I am using a custom rom that's all...
no band 30 guys. http://www.htc.com/us/smartphones/htc-u11/
Not a fair critisim for HTC. Even if the phone is capable like my non-AT&T S8, if the phone does not have the AT&T logo on it they will not allow these features. So complain about AT&T like I do.
I'm on at&t and I'm getting full LTE with zero issues.
Proof
Z51 said:
Proof
Click to expand...
Click to collapse
See if you still have LTE during a call. The LTE icon should go away and if you go into about phone and then network, it'll most likely say HSPA. The problem is we're not getting services like VoLTE and wifi calling. In normal cases, HSPA speeds should be manageable considering the average phone call won't be very long and there's wifi nearly everywhere now. This is just bad for those in areas with poor reception. I've been doing ok with the whole issue since I never really noticed much of a difference with HD voice and I'm usually always somewhere with wifi.
My question is what did they do differently with the U11 than the 10. We never had any of these issues with the 10 being unlocked and not certified and all that bs
GSE20 said:
See if you still have LTE during a call. The LTE icon should go away and if you go into about phone and then network, it'll most likely say HSPA. The problem is we're not getting services like VoLTE and wifi calling. In normal cases, HSPA speeds should be manageable considering the average phone call won't be very long and there's wifi nearly everywhere now. This is just bad for those in areas with poor reception. I've been doing ok with the whole issue since I never really noticed much of a difference with HD voice and I'm usually always somewhere with wifi.
My question is what did they do differently with the U11 than the 10. We never had any of these issues with the 10 being unlocked and not certified and all that bs
Click to expand...
Click to collapse
It lasts about 20 seconds then it changed to 4G only. LTE is gone
Z51 said:
I'm on at&t and I'm getting full LTE with zero issues.
Click to expand...
Click to collapse
Z51 said:
Proof
Click to expand...
Click to collapse
I also get LTE that is not the issue here, the problem is VoLTE.
GSE20 said:
See if you still have LTE during a call. The LTE icon should go away and if you go into about phone and then network, it'll most likely say HSPA. The problem is we're not getting services like VoLTE and wifi calling. In normal cases, HSPA speeds should be manageable considering the average phone call won't be very long and there's wifi nearly everywhere now. This is just bad for those in areas with poor reception. I've been doing ok with the whole issue since I never really noticed much of a difference with HD voice and I'm usually always somewhere with wifi.
My question is what did they do differently with the U11 than the 10. We never had any of these issues with the 10 being unlocked and not certified and all that bs
Click to expand...
Click to collapse
The importance for me & probably for many others on getting VoLTE is that I do technical support on my phone and trouble shooting while on a call takes to much time most of the time, that being said if I don't have the option to make phone calls on VoLTE means internet speeds while on a call is crap.... I really don't care about HD call clarity as far as I can here the other person, but the internet speed while on a call it is important to me the faster I can browse the faster I can provide technical support
Z51 said:
It lasts about 20 seconds then it changed to 4G only. LTE is gone
Click to expand...
Click to collapse
Having a weird issue with my U11 on AT&T. I randomly lose all signal for no reason then takes a good 30 seconds for it to connect again.
It has happened at least a couple times a week mid phone call which is really obnoxious. I have seen it happen a few times when I am just browsing through my phone not on a call so I know its not just a calling issue, and I am sure it has happened multiple times when I am not looking at my phone at all and I don't notice.
Anyone else had this issue? An issue with AT&T and can be fixed by a firmware update? Or am I alone and need to RMA?
I know this thread is old, but can't we use the ATT RUU if you do what you need to do? We used to be able to go back and forth, at least that's what I did with both my M7 and M8. If you really need those features, that's what I would do.

Categories

Resources