Today I accidently turned it on (the thing in the bootloader) and now I can't turn it off no matter what so I can do a revert to stock .img, I used the PDI15.img or w.e that would revert back to stock forgetting that I had the newest radio and now I can't revert to stock or turn S-OFF. Please help
Current Configurations:
GLACIER PVT SHIP S-ON
HBOOT - 0.86.0000
MICORP - 0429
RADIO - 26.09.04.26_M
eMMC - BOOT
More Info:
When I use a PDIMG or w/e file it errors out as being old
Can you still boot? Like into your rom? If so just try rooting using visionary and using a root explorer to push the gfree files to data/local/ then just follow the normal rooting procedure
Sent from my HTC Glacier using XDA Premium App
Nicgraner said:
Can you still boot? Like into your rom? If so just try rooting using visionary and using a root explorer to push the gfree files to data/local/ then just follow the normal rooting procedure
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Yeah I can still boot into my rom, bootloader, and recovery and okay will try that
EDIT: Okay I did, I tried turning S-OFF but it says something about eMMC power cycle failed
XxKOLOHExX said:
Yeah I can still boot into my rom, bootloader, and recovery and okay will try that
EDIT: Okay I did, I tried turning S-OFF but it says something about eMMC power cycle failed
Click to expand...
Click to collapse
dude! I noticed this also this morning. I am rooted(using setcpu and root explorer just fine) but in hboot it says s=on. I was also wanting to flash the stock .img and start fresh. thought I was the only one having this problem. tried everything you did and got the same results.
What ROM are you on? AFAIK, gfree, requires the stock kernel to do what it does. How on earth did you turn S-ON? That sort of thing shouldn't just happen out of nowhere.
How is the progress on fixing your phone?
jdkoren said:
What ROM are you on? AFAIK, gfree, requires the stock kernel to do what it does. How on earth did you turn S-ON? That sort of thing shouldn't just happen out of nowhere.
Click to expand...
Click to collapse
currently on Evil D mTGB v1.0, Faux 0.0.7 CFS lv leak kernel. everything works fine, no FC's or anything. just having the same issues as XxKOLOHExX. I really have no idea how it turned on by itself, I dont remember doing anything out of the ordinary
I was trying to get back to stock from the rom i was on. (MIUI) and when I used the stock .img though the bootloader it went all good till it rebooted, then it said failed because the file was old and now I am stuck with s-on and I don't know how to turn it off
How did you get to the stock bootloader? Did you have eng bootloader at one point? What meth of root did you use? Alot of info missing.
Now download the stock radio.img and push it via adb or just download the PD15IMG.zip (radio only not rom included). Once this is done you can revert back to stock rom/radio using standard PD15IMG.zip (radio+rom). Now depending on the type of root you used it would depend if you still have radio flag on/off even if your reverted back to stock bootloader.
PS: You can get PD15IMG.zip (stock radio) from master radio thread and PD15IMG.zip (stock radio/rom) by doing search.
PermROOT said:
How did you get to the stock bootloader? Did you have eng bootloader at one point? What meth of root did you use? Alot of info missing.
Now download the stock radio.img and push it via adb or just download the PD15IMG.zip (radio only not rom included). Once this is done you can revert back to stock rom/radio using standard PD15IMG.zip (radio+rom). Now depending on the type of root you used it would depend if you still have radio flag on/off even if your reverted back to stock bootloader.
PS: You can get PD15IMG.zip (stock radio) from master radio thread and PD15IMG.zip (stock radio/rom) by doing search.
Click to expand...
Click to collapse
It flashed the bootloader when I flashed the PD15IMG.zip, it just stop when I did the whole procedure. Nope never flashed an Engineer Bootloader. I used theunlockr.com sites method
I tried that, it uziped then tried to flash the radio then just went back to the original menu for the bootloader
If you used the VISIONary+ (TempROOT) and root.sh (PermROOT) meth then you already had engineering hboot (0.85.2007) pushed though terminal on "/dev/block/mmcblk0p18". Now you did something in between is what I would like to know.
As you flashed new radio (26.09.04.26_M) which I am clear. But what I like to know is how did you end up with default hboot (0.86.0000)? If you had S=OFF you didn't lose it via flashing new radio. Which PD15IMG.zip did you install? Now when you say PD15IMG.zip what do you mean? It can be anything as its default mt4g system based image. Stock PD15IMG.zip = (Sense 2.2.1 Rom/Radio 26.03.02.26_M). Did you install leaked PD15IMG.zip from Panache? or GB2.3.3S?
Are you not 1 of the Royal dev's? who try to take over Silence's IG if I recall. I am just assuming here but this is why you do "NOT" dump system image via hboot. What you should have done was do complete total system wipe (format /data; /system) and then flash new edify based CWMR flashable rom.
PermROOT said:
If you used the VISIONary+ (TempROOT) and root.sh (PermROOT) meth then you already had engineering hboot (0.85.2007) pushed though terminal on "/dev/block/mmcblk0p18". Now you did something in between is what I would like to know.
As you flashed new radio (26.09.04.26_M) which I am clear. But what I like to know is how did you end up with default hboot (0.86.0000)? If you had S=OFF you didn't lose it via flashing new radio. Which PD15IMG.zip did you install? Now when you say PD15IMG.zip what do you mean? It can be anything as its default mt4g system based image. Stock PD15IMG.zip = (Sense 2.2.1 Rom/Radio 26.03.02.26_M). Did you install leaked PD15IMG.zip from Panache? or GB2.3.3S?
Are you not 1 of the Royal dev's? who try to take over Silence's IG if I recall. I am just assuming here but this is why you do "NOT" dump system image via hboot. What you should have done was do complete total system wipe (format /data; /system) and then flash new edify based CWMR flashable rom.
Click to expand...
Click to collapse
Yeah I know that, I Was trying to go back to stock everything using the unrooting method(PD15IMG.zip). Using this file I was able to get through the first step and it rebooted, then it went back to bootloader and now it won't take the PD15IMG.zip saying that it is an older file. Yes I am one of the devs, That's why before posting I tried everything I could think of, gfree, old unrooting methods, etc. I didn't use a dump lol I'm not that noobish haha
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
PermROOT said:
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
Click to expand...
Click to collapse
Thank you so much for the help
PermROOT said:
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
Click to expand...
Click to collapse
lol sorry for the extra work, just dont wanna have the chance of bricking my phone but like XxKOLOHExX I wanted to revert back to stock from mTGB using the stock PD15IMG_Glacier_TMOUS_1.17.531.2_Radio_12.28b.60.140e_26.03.02.26_M_release_155771_signed. everything he described is happening to me also, step by step. I rooted with the visionary+ and permroot method(unlockr). I did download and flash the 26.08.04.30 radio. heres what I see in hboot
GLACIER PVT SHIP S-ON
HBOOT-0.86.0000
MICROP-0429
RADIO-26.08.04.30_M3
eMMC-boot
Sep 27 2010, 11:12:59
so what youre saying is that we should try flashing the stock radio first, wipe the whole phone(including sdcard?), then flash the stock PD15IMG? Ill give it a shot real quick, thanks
*edit* hboot wont even let me flash the stock radio, itll say checking but wont actually let me update it
Well clarknick27 the problem here is that root.sh to gain PermROOT via VISIONary+ just push the 0.85.2007 eng hboot and giving temporary S=OFF, the true security flag as we know it is controlled in the radio. So when you try to revert back using stock PD15IMG (rom/radio) it reverted back to the stock 0.86.0000 hboot thus turning on the security flag on.
What you all should have done is reverted back same way you installed it. Which would have been first use PD15IMG.zip (stock radio) and then use stock PD15IMG.zip (radio/rom). I still need some sleep lol I just wokeup after sleeping 2hours.
The MT4G I tested on I rooted it via VISIONary+ and then flashed GB Leak rom not the PD15IMG.zip (leak radio/rom) which contained the 0.89.0005 hboot. So after flashing stock radio PD15IMG.zip (radio 26.03.02.26_M) I was able to flash stock PD15IMG.zip (rom/radio) without problem. Which is same as I suspected even after S=ON due to same version radio no problem. If I had newer radio after that point it would be locked out. Let me go to sleep and wakeup and ill see what happens from there. As I have clean MT4G ill have to reroot it first.
BTW XxKOLOHExX and clarknick27 just in case my account gets disabled. Do the following and report it here and ill see from there.
1) Which working rom you currently have installed on the device?
I know trying to reroot using gfree may give you similar result as my test: http://forum.xda-developers.com/showthread.php?t=1066966 < not important but unable to root on newer rom.
2) What happens when you try to reroot it using VISIONary+ (TempROOT) and root.sh (PermROOT)?
Did you try it? If so what is the end result? so post back. Ill check and go from there.
PermROOT said:
BTW XxKOLOHExX and clarknick27 just in case my account gets disabled. Do the following and report it here and ill see from there.
1) Which working rom you currently have installed on the device?
I know trying to reroot using gfree may give you similar result as my test: http://forum.xda-developers.com/showthread.php?t=1066966 < not important but unable to root on newer rom.
2) What happens when you try to reroot it using VISIONary+ (TempROOT) and root.sh (PermROOT)?
Did you try it? If so what is the end result? so post back. Ill check and go from there.
Click to expand...
Click to collapse
1) currently running Evil D's mTGB v1.0 rom with Faux's 0.0.7 CFS LV leak kernel. tried rooting with visionary and terminal first, no success. I then tried out the gfree method, and got "Attempting to power cycle eMMC...failed. Module failed to load: No such file or directory."
2) I installed Visionary using Astro file manager, then run Visionary. I click on "temproot now" and it starts, but then the screen goes black and doesnt do anything. I have let it sit on the black screen for well over 15mins before with no luck. I can click on "attempt to permroot" and it will ask for permissions and reboot and everything. my s=on but I still have root access and 0.86.000 bootloader. this is what I see using terminal before rebooting to see if s=off
Did you do the Radio S=OFF using gfree? If so that would explain why you still have root as security is disabled on the device totally. If thats the case then just push the eng bootloader manually via adb or though terminal and reboot. For now XxKOLOHExX is locked lets see what I find ill post back for him.
PermROOT said:
Did you do the Radio S=OFF using gfree? If so that would explain why you still have root as security is disabled on the device totally. If thats the case then just push the eng bootloader manually via adb or though terminal and reboot. For now XxKOLOHExX is locked lets see what I find ill post back for him.
Click to expand...
Click to collapse
thanks for taking the time to help out, Ill give it a shot
*edit* just tried pushing the eng bootloader through adb and it didnt stick or flash, rebooted into hboot and it still says 0.86.0000, s=on, 26.08.04.30_M3 radio
Related
I need to send my Mytouch 4g in for repair due to an issue with "limited service" problems. Both T-Mobile and HTC said it is a rare problem and it needs to come in for repair.
My problem is that my phone is/has been rooted. I need to COMPLETELY UNROOT it before sending it in, or they will not repair/replace.
What can I do to completely unroot so they will not know that it was ever rooted?
I have run the unlockr method with the PD15IMG but Im not sure that is it. What else can do to see that it was rooted? Is there anything other than info in the bootloader? I turned the S-On again.
PS - the issue with my phone is when i put in my SIM card (under any rom, including stock) it comes back with a message saying "limited service" and i cannot do anything to fix it. If you have an answer for this too, that would be helpful.
Either way I dont want to lost this phone due to root/warranty problems.
Thanks ahead of time....
How did you root it? Did you use gfree and simunlock? Did you flash engineering hboot? Did you S-OFF? Did you flash custom images?
There are a lot of questions to answer in what to undo.
If you SIM/Super CID unlocked and radio S-OFF with gfree then you need to follow the instructions in the gfree thread on how to restore your part7 backup.
If you flashed the engineering hboot, again, follow info in the gfree thread on how to flash it back to stock.
Once you are back to normal hboot and S-ON, just loading the PD15IMG for the complete OTA (find the thread in the dev section) will factory wipe and clear the rest for you.
Thanks for the quick reply. I followed the unlockr method completely to gain root.
theunlockr.com/2010/12/10/how-to-gain-permanent-root-and-s-off-on-the-t-mobile-mytouch-4g-htc-glacier/
Then I installed Iced Glacier.
I also did their unroot method which includes flashing the PD15IMG and turning the S-On. Normally, should I receive an OTA after flashing this? Or is this THE updated image?
If is should expect an OTA, I will not get it. The reason i need to send the phone in is because i do not get service with the SIM card in. It reads "Limited service" "Emergency Calls Only". In this case, i would not recieve an OTA. Is there anything else I can do?
Thanks again.
http://forum.xda-developers.com/showthread.php?t=858996
Scroll down to "follow these steps to restore stock hboot (0.86.0000) and flash that back on if you have not already.
If you flashed the PD15IMG from this thread then it already has the OTA updated applied and you should be g2g.
Thank you very much. That is a huge help.
After updating the HBoot and flashing the PD15IMG we should be back to stock.
Is there any way after that HTC will see it as previously rooted?
I thought to myself that the hackers were smarter than the developers.... Im glad I was right.
Thanks again.
Sent from my HTC Glacier using XDA App
pnut22r said:
Is there any way after that HTC will see it as previously rooted?
Click to expand...
Click to collapse
With S-ON, a stock hboot, and a fresh flash of the OTA image -- no, not to my knowledge.
Ok so I am expecting to receive a replacement for the BAD SCREEN (inferior) issue. So preparing to get my phone to STOCK condition.
--------PRESENT STATE----------
Rooted - using http://forum.xda-developers.com/showthread.php?t=858021
S=OFF
Radio - 26.09.04.26
ROM - Nexus AOSP 1.2.7
Recovery - 3.0.2.4
----------STOCK STATE------------
Unroot - http://forum.xda-developers.com/showthread.php?t=924923
S=ON
Radio - 26.03.02.26 http://forum.xda-developers.com/showthread.php?t=1059347
Recovery - ????
Now I kind of know where I need to be at but I am not sure of the sequence of the steps. Also, how do I get back to stock recovery from Clockwork?
Is there a good check list of things to make sure before sending back the old phone?
thanks a lot.
for unroot
download stock rom from here http://forum.xda-developers.com/showthread.php?t=901477
rename it PD15IMG.zip and put it in the root of your sdcard not in a folder
go into hboot by powering off then hold VOL DOWN+POWER
then it will automatically check to find PD15IMG.zip when it ask for update click yes
wait for it to install done stock unroot
Thanks for your reponse. I was aware of that method and was planning on using it. Does that also take care of clockwork recovery and updated radio?
I was reverting back to stock from CM7 with Radio 26.09.04.26_M I used unroot.sh to turn s-on then went into bootloader to run PD15img tried to run and said it was an older version. I tried in vain to gfree to and root.sh to s-off to no avail. Finally found out the the latest radio patches the exploit. If you run into this problem follow this thread below, You have to use a hex editor and you need to delete a byte to change the 1800 to 531.
2.09.1800.1
11. Change that to:
1.14.531.1
http://blog.travisjames.net/archives/297
hey glad you fixed it! a lot of people have been doing this lately...theyre on the updated radio and try to flash the stock PD15IMG to go back to stock, but doing so will give you a few problems with S turning on and going back to the stock hboot and give you the "main version is older" error. next time, revert back to the stock radio and then flash the stock PD15IMG
Yeah I forgot I was on the new radio. With s-on I couldn't flash just the stock radio. I posted this for those who make the same mistake this is the only fix.
Sent from my HTC Glacier using XDA Premium App
Here's the story. Got my original G2, played with it, rooted, s-off, the works. Needed to send it in for a warranty exchange so I unroot, s-on, etc etc, and put gingerbread on it. So I had the pc10img file on my sdcard.
Fast forward, I got my replacement G2, it had Froyo, had it rooted, s-off, the works before the battery was even finished charged (I waited for it to finish before I rebooted of course!) and I loaded up the official MIUI. usb tethering wasn't working so I figured I would download and flash a pershoot kernel! That "bricked" it. Wouldn't boot at all! So I booted it in to recovery (vol down + pwr) forgetting that the official gingerbread pc10img was on the sdcard. I was out and about so I just needed my phone back ASAP, so I went ahead and flashed it. So now I have stock gingerbread, with S-OFF and no way to get root. Is there another pc10img I can flash that is pre-rooted, or am I SOL til someone figures out how to root the latest update?
I'm gonna try gingerbreak after posting since I DO have s-off still...
silverton said:
Here's the story. Got my original G2, played with it, rooted, s-off, the works. Needed to send it in for a warranty exchange so I unroot, s-on, etc etc, and put gingerbread on it. So I had the pc10img file on my sdcard.
Fast forward, I got my replacement G2, it had Froyo, had it rooted, s-off, the works before the battery was even finished charged (I waited for it to finish before I rebooted of course!) and I loaded up the official MIUI. usb tethering wasn't working so I figured I would download and flash a pershoot kernel! That "bricked" it. Wouldn't boot at all! So I booted it in to recovery (vol down + pwr) forgetting that the official gingerbread pc10img was on the sdcard. I was out and about so I just needed my phone back ASAP, so I went ahead and flashed it. So now I have stock gingerbread, with S-OFF and no way to get root. Is there another pc10img I can flash that is pre-rooted, or am I SOL til someone figures out how to root the latest update?
I'm gonna try gingerbreak after posting since I DO have s-off still...
Click to expand...
Click to collapse
To my knowledge there is still no temporary exploit for gingerbread that you would need to gain permanent root, sorry. It looks like you might be sol, but since you do have s-off try some of the other exploits like psneuter or gfree and post back. I would be very intrested if the hboot was somehow responsible for keeping the gingerbread g2's from getting root
Sent from my self-aware G2 w/ PyroMod v2.3.4 & UnNova Theme v1.0
gingerbreak did not work for me. I get this with the psneuter tool
spirit platform-tools # ./adb shell /data/local/tmp/psneuter
Failed to set prot mask (Inappropriate ioctl for device)
Click to expand...
Click to collapse
Did you flash the engineering HBOOT during the rooting process?
theSpam said:
Did you flash the engineering HBOOT during the rooting process?
Click to expand...
Click to collapse
Good question. I'm not sure actually. But I do know right now that it has an official HBOOT on it. 0.82.0008
silverton said:
Good question. I'm not sure actually. But I do know right now that it has an official HBOOT on it. 0.82.0008
Click to expand...
Click to collapse
I'm unsure if HTCs .zip includes a HBOOT update or not...but can you enter HBOOT (power+vol down) and check if it says SHIP S-OFF or ENG S-OFF?
I think that, since you're S-OFF, you'll be able to apply any PC10IMG.zip since it won't check signatures/versions - can someone correct me on this if I'm wrong?
theSpam said:
I'm unsure if HTCs .zip includes a HBOOT update or not...but can you enter HBOOT (power+vol down) and check if it says SHIP S-OFF or ENG S-OFF?
Click to expand...
Click to collapse
It says SHIP S-OFF. And I was also thinking that since it is S-OFF that I could flash a PC10IMG that was already rooted, but seems almost all roms these days are only clockwork flashable.
Sent from my T-Mobile G2 using XDA App
SUCCESS!
Back to semi-square one anyway.
I was able to successfully flash the shipped rom as a PC10IMG which I got here (http://shipped-roms.com/index.php?category=android&model=Vision) and I'm going to say that this is most likely because I am radio s-off.
silverton said:
SUCCESS!
Back to semi-square one anyway.
I was able to successfully flash the shipped rom as a PC10IMG which I got here (http://shipped-roms.com/index.php?category=android&model=Vision) and I'm going to say that this is most likely because I am radio s-off.
Click to expand...
Click to collapse
It is because u were s-off. That was my configuration also so if I flash that official gb PC10IMG I'm still s-off but unrooted. To reroot I simply flash the 1.19 PC10IMG, let it get the 1.22 OTA if I feel like it then psneuter/gfree it all over again.
PS - to anyone else... don't even bother with gingerbreak for that official gb
Sent from my HTC Vision using XDA App
I would put anything with root on it, just to get cwm. Than do as you normally would. As you may know, things are far easier through recovery.
::edit:: you should be able to find a custom built pc10img zip thingy, somewhere on these forums or from someone.
I'm sure you can easily make your own, and it should work.
Goodluck.
Sent from my HTC Vision using XDA Premium App
Alright guys so the bottom 1/5 of my screen stopped responding so I want to return my phone to tmobile and have it replaced.
But ive run into an issue. Sometimes when I go into bootloader it clamis i have s-off other times it tells me its s-on. and when i try to flash older radio so i can revert to stock rom it just says "checking" the image and then throws me back into the bootloader. any ideas on how i can restore to stock? Thanks in advance.
jeet92 said:
Alright guys so the bottom 1/5 of my screen stopped responding so I want to return my phone to tmobile and have it replaced.
But ive run into an issue. Sometimes when I go into bootloader it clamis i have s-off other times it tells me its s-on. and when i try to flash older radio so i can revert to stock rom it just says "checking" the image and then throws me back into the bootloader. any ideas on how i can restore to stock? Thanks in advance.
Click to expand...
Click to collapse
Gonna need more info to troubleshoot. Lets start with how did you root the phone to start and how you unrooted. Are you doing anything different when it shows s-off than when it says s-on?
well i rooted with temp visionary and then gfree. now the trouble is i cant get it back to stock radio. that way i can flash original rom and unroot. I try to flash a new radio and it goes from s-on to s-off and when i batterypull and turn it back on its perfectly fine as s-on
jeet92 said:
well i rooted with temp visionary and then gfree. now the trouble is i cant get it back to stock radio. that way i can flash original rom and unroot. I try to flash a new radio and it goes from s-on to s-off and when i batterypull and turn it back on its perfectly fine as s-on
Click to expand...
Click to collapse
I think you have some terminology mixed up. Are you saying that you flashed an updated radio and then PD15IMG.zip update from hboot? Are you trying to flash the stock rom or are you trying to unroot?
Sent from my HTC Glacier using XDA Premium App
PermROOT said:
Hello Phateless do you remember me? lol I am always on diff name so ya.
But yes PD15IMG.zip is not the golden solution to everything. It all depends on how you originally rooted your MT4G as VISIONary+ (TempROOT) and root.sh (PermROOT). In that case your S=OFF security off flag is dependent on the eng hboot which was pushed to /dev/block/mmcblk0p18 during PermROOT.
Now since its not true security off once you have newer radio. You try to run PD15IMG.zip (Sense 2.2.1 Rom/Radio 26.03.02.26_M) after the first update which is stock hboot you would be locked due to it changing S=ON thus on next step it will fail due to the image being older than originally on which is currently flashed which would be the radio. In this case your in a point where you shouldn't be as you can be locked out and no way to reroot. which I am working on finding. This also goes for gfree radio s=off.
If you do want to go back download PD15IMG.zip (stock radio 26.03.02.26_M) and then flash it once that is done then you can revert back to stock rom/radio using standard PD15IMG.zip (Sense 2.2.1 Rom/Radio 26.03.02.26_M). Keep in mind unless the new PD15IMG.zip is out you can't revert it back if your locked out due to source being outdated than current image.
Click to expand...
Click to collapse
--------------------------
Found this post here in THE Bible. Trying to understand exactly what it means.
What is he saying here?
Can someone put this into noob terms please?
THANK!!!
I am not sure how to explain it furthermore as when I posted that it was clear to everyone, but ill try to simplify.
The original stock rom that came with our device was 2.2.1S and later we had GB2.3.X port and we mostly switched. Then came the radio rom which I hope I don't need to explain what the image does. So the standard stock radio that came with our device was 26.03.02.26_M. So later on as Panache came out we had leak to other radios which user could flash, thus changing it from stock radio to leaked radio. I hope it make sense up to there.
Now keep in mind we have 2 type of root meth as one is via TempROOT/PermROOT as I explained before via VISIONary+ which just push the eng_hboot and gives the illusion of S=OFF but the true security is not off as that is only done if you do the other rooting meth which is PermaROOT which disables the radio security completely.
Now the problem few users faced was when they flashed the leaked radio and they wanted to revert back to stock rom/radio via PD15IMG.zip for our MT4G (IDD15000). The installation would fail only for folks who had root via PermROOT as they never had true S=OFF thus once the eng_hboot is replaced with stock bootloader the security is disabled thus user can't complete the second part of the process which would be flashing the radio. So only solution was that they first revert back to stock radio or wait for newer radio because the source of the image inside PD15IMG.zip was older than the radio.img that was already flashed inside user's MT4G.
I hope it explains if not well IDK how to explain any better man :O
So if I'm understanding this all correctly, how I find out if this will affect me?
Where and what information should I provide you in order to find out if this will happen to me as well.
I'm getting ready to send my phone in for an exchange and was looking to flash PD15IMG.zip before doing this when I came across this post.
I rooted my phone with Visionary R14 and Terminal Emulator.
What other info do you need? Please let me know. Thank you.
At this point it wont affect you as thats obsolete due to TMoUS releasing newer stock rom/radio for our MT4G few months ago as Panache radio leak is older than the current stock rom/radio. As its GB2.3.4S which comes with the newest radio which is newer than any radio you flash. So the source of the PD15IMG.zip if you have the newest one then it will always be newer or equal to the radio.img already in device and it means in simple term it will flash the 2nd part. I hope it make sense as it should not affect anyone now. Even if it does all they have to do is run the current new PD15IMG.zip and it will fix the issue which user faced few months back.
nguyendqh said:
So if I'm understanding this all correctly, how I find out if this will affect me?
Where and what information should I provide you in order to find out if this will happen to me as well.
I'm getting ready to send my phone in for an exchange and was looking to flash PD15IMG.zip before doing this when I came across this post.
I rooted my phone with Visionary R14 and Terminal Emulator.
What other info do you need? Please let me know. Thank you.
Click to expand...
Click to collapse
If this is all about going back for an exchange, i recently did just this. Please see my post on the topic: http://forum.xda-developers.com/showthread.php?t=1241740
If all you did was the temproot/permaroot method via visionary+, and not the gfree method (gfree is actual s=off), then I believe some of the steps may be different. Specifically, you may be able to skip the whole bit about turning s=on again.
So which is it?
So rooted via Visionary R14 and being on Virtuous Unity (newest update)
I should be able to flash PD15IMG.zip from this link here: http://forum.xda-developers.com/showthread.php?t=863899
and have no problems yeah?
Sorry for all the questions. But yeah I'm only half to 75% following what you're saying.
I'm not advanced yet. =(
Thanks for the help again though.
Keep in mind PD15IMG.zip is the default system file for our device which is checked on the bootloader as our device ID is PD15000 thus getting the PD15IMG name. So PD15IMG.zip can be multi files as we have 2 of them 1 is 2.2.1 and newest one is 2.3.4 just look in the dev section you will find the newest PD15IMG.
http://forum.xda-developers.com/showthread.php?t=1059347
NEW-PD15IMG: PD15IMG_Glacier_Gingerbread_S_TMOUS_2.19.531.1_Radio_12.58.60.25_26.11.04.03_M_release_200756_signed
nicholasb said:
If this is all about going back for an exchange, i recently did just this. Please see my post on the topic: http://forum.xda-developers.com/showthread.php?t=1241740
If all you did was the temproot/permaroot method via visionary+, and not the gfree method (gfree is actual s=off), then I believe some of the steps may be different. Specifically, you may be able to skip the whole bit about turning s=on again.
So which is it?
Click to expand...
Click to collapse
I did not use the gfree method.
AggNA said:
Keep in mind PD15IMG.zip is the default system file for our device which is checked on the bootloader as our device ID is PD15000 thus getting the PD15IMG name. So PD15IMG.zip can be multi files as we have 2 of them 1 is 2.2.1 and newest one is 2.3.4 just look in the dev section you will find the newest PD15IMG.
http://forum.xda-developers.com/showthread.php?t=1059347
NEW-PD15IMG: PD15IMG_Glacier_Gingerbread_S_TMOUS_2.19.531.1_Radio_12.58.60.25_26.11.04.03_M_release_200756_signed
Click to expand...
Click to collapse
Thanks for all the help bro. I really really appreciate it.
Love all the help that the XDA community provides.
this guy definitely knows what he's talking about, provided help for me in the past