Here's the story. Got my original G2, played with it, rooted, s-off, the works. Needed to send it in for a warranty exchange so I unroot, s-on, etc etc, and put gingerbread on it. So I had the pc10img file on my sdcard.
Fast forward, I got my replacement G2, it had Froyo, had it rooted, s-off, the works before the battery was even finished charged (I waited for it to finish before I rebooted of course!) and I loaded up the official MIUI. usb tethering wasn't working so I figured I would download and flash a pershoot kernel! That "bricked" it. Wouldn't boot at all! So I booted it in to recovery (vol down + pwr) forgetting that the official gingerbread pc10img was on the sdcard. I was out and about so I just needed my phone back ASAP, so I went ahead and flashed it. So now I have stock gingerbread, with S-OFF and no way to get root. Is there another pc10img I can flash that is pre-rooted, or am I SOL til someone figures out how to root the latest update?
I'm gonna try gingerbreak after posting since I DO have s-off still...
silverton said:
Here's the story. Got my original G2, played with it, rooted, s-off, the works. Needed to send it in for a warranty exchange so I unroot, s-on, etc etc, and put gingerbread on it. So I had the pc10img file on my sdcard.
Fast forward, I got my replacement G2, it had Froyo, had it rooted, s-off, the works before the battery was even finished charged (I waited for it to finish before I rebooted of course!) and I loaded up the official MIUI. usb tethering wasn't working so I figured I would download and flash a pershoot kernel! That "bricked" it. Wouldn't boot at all! So I booted it in to recovery (vol down + pwr) forgetting that the official gingerbread pc10img was on the sdcard. I was out and about so I just needed my phone back ASAP, so I went ahead and flashed it. So now I have stock gingerbread, with S-OFF and no way to get root. Is there another pc10img I can flash that is pre-rooted, or am I SOL til someone figures out how to root the latest update?
I'm gonna try gingerbreak after posting since I DO have s-off still...
Click to expand...
Click to collapse
To my knowledge there is still no temporary exploit for gingerbread that you would need to gain permanent root, sorry. It looks like you might be sol, but since you do have s-off try some of the other exploits like psneuter or gfree and post back. I would be very intrested if the hboot was somehow responsible for keeping the gingerbread g2's from getting root
Sent from my self-aware G2 w/ PyroMod v2.3.4 & UnNova Theme v1.0
gingerbreak did not work for me. I get this with the psneuter tool
spirit platform-tools # ./adb shell /data/local/tmp/psneuter
Failed to set prot mask (Inappropriate ioctl for device)
Click to expand...
Click to collapse
Did you flash the engineering HBOOT during the rooting process?
theSpam said:
Did you flash the engineering HBOOT during the rooting process?
Click to expand...
Click to collapse
Good question. I'm not sure actually. But I do know right now that it has an official HBOOT on it. 0.82.0008
silverton said:
Good question. I'm not sure actually. But I do know right now that it has an official HBOOT on it. 0.82.0008
Click to expand...
Click to collapse
I'm unsure if HTCs .zip includes a HBOOT update or not...but can you enter HBOOT (power+vol down) and check if it says SHIP S-OFF or ENG S-OFF?
I think that, since you're S-OFF, you'll be able to apply any PC10IMG.zip since it won't check signatures/versions - can someone correct me on this if I'm wrong?
theSpam said:
I'm unsure if HTCs .zip includes a HBOOT update or not...but can you enter HBOOT (power+vol down) and check if it says SHIP S-OFF or ENG S-OFF?
Click to expand...
Click to collapse
It says SHIP S-OFF. And I was also thinking that since it is S-OFF that I could flash a PC10IMG that was already rooted, but seems almost all roms these days are only clockwork flashable.
Sent from my T-Mobile G2 using XDA App
SUCCESS!
Back to semi-square one anyway.
I was able to successfully flash the shipped rom as a PC10IMG which I got here (http://shipped-roms.com/index.php?category=android&model=Vision) and I'm going to say that this is most likely because I am radio s-off.
silverton said:
SUCCESS!
Back to semi-square one anyway.
I was able to successfully flash the shipped rom as a PC10IMG which I got here (http://shipped-roms.com/index.php?category=android&model=Vision) and I'm going to say that this is most likely because I am radio s-off.
Click to expand...
Click to collapse
It is because u were s-off. That was my configuration also so if I flash that official gb PC10IMG I'm still s-off but unrooted. To reroot I simply flash the 1.19 PC10IMG, let it get the 1.22 OTA if I feel like it then psneuter/gfree it all over again.
PS - to anyone else... don't even bother with gingerbreak for that official gb
Sent from my HTC Vision using XDA App
I would put anything with root on it, just to get cwm. Than do as you normally would. As you may know, things are far easier through recovery.
::edit:: you should be able to find a custom built pc10img zip thingy, somewhere on these forums or from someone.
I'm sure you can easily make your own, and it should work.
Goodluck.
Sent from my HTC Vision using XDA Premium App
Related
How do I COMPLETELY unroot EVO to send back to Sprint
Like s-off s-on plz help
If you rooted using Unrevoked 3.21 there is a thread listed in Android Development explaining the process as well as the needed links to download the needed zip files to turn S-On and the zip file to restore back to Stock Froyo 2.2
SouthernEvo said:
If you rooted using Unrevoked 3.21 there is a thread listed in Android Development explaining the process as well as the needed links to download the needed zip files to turn S-On and the zip file to restore back to Stock Froyo 2.2
Click to expand...
Click to collapse
Tbd but I used toast.method to root that used a lot of adb
mccurt29 said:
Tbd but I used toast.method to root that used a lot of adb
Click to expand...
Click to collapse
Ok but there are still methods in the forum for unrooting just like how you rooted. I would just do a search for them and choose which one you feel is the easiest for you to understand. Also if you are getting another EVO unrevoked 3.21 is as many in here have said easy peasy for rooting.
Good luck
playya said:
Ok but there are still methods in the forum for unrooting just like how you rooted. I would just do a search for them and choose which one you feel is the easiest for you to understand. Also if you are getting another EVO unrevoked 3.21 is as many in here have said easy peasy for rooting.
Good luck
Click to expand...
Click to collapse
Thanks!......
You need to run the RUU.exe found in the Dev section. It will do the trick.
Sent from my PC36100 using XDA App
novanosis85 said:
You need to run the RUU.exe found in the Dev section. It will do the trick.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Precisely. It can be found here:
*OFFICIAL* RUU_SuperSonic_S_Sprint_WWE_3.29.651.5_Radio_2.15. 00.09.01_NV_1.77_CNV_rel.
One thing to check first: do you have S-OFF? This would be the case if you ever ran Unrevoked Forever or Unrevoked 3.21. If so, you'll need to flash the Unrevoked Forever S-ON tool from recovery before running the RUU.
Noxious Ninja said:
Precisely. It can be found here:
*OFFICIAL* RUU_SuperSonic_S_Sprint_WWE_3.29.651.5_Radio_2.15. 00.09.01_NV_1.77_CNV_rel.
One thing to check first: do you have S-OFF? This would be the case if you ever ran Unrevoked Forever or Unrevoked 3.21. If so, you'll need to flash the Unrevoked Forever S-ON tool from recovery before running the RUU.
Click to expand...
Click to collapse
Thx guys I never used unrevok just toast methods but how do u check the A-on thing & should it be on or off
Also this 1 guy on this forum said he used the ruu & had s-on/off but Sprint still found out he rooted so should I wipe that ex--- >#366# stuff too?
mccurt29 said:
Thx guys I never used unrevok just toast methods but how do u check the A-on thing & should it be on or off
Also this 1 guy on this forum said he used the ruu & had s-on/off but Sprint still found out he rooted so should I wipe that ex--- >#366# stuff too?
Click to expand...
Click to collapse
Reboot into the bootloader (turn phone off, then hold power+volume down until it comes on). Then look at the end of the first line.
If it says SHIP S-ON, you're good.
If it says SHIP S-OFF, you need to run the Unrevoked tool.
If it says ENG S-OFF (which should be the case if you used Toast's method), it is indeterminate.
However, if you never used Unrevoked at all, you shouldn't have to worry about it. You can check after you run the RUU, which will reset it to the SHIP bootloader.
I believe the 3.29 RUU resets everything, including the PRI. Toast's method downgraded the PRI, and it was difficult to get it back before the current update, so this used to be a sure-fire way of telling whether you had rooted. Unless you had a bad Wimax flash and broke your 4G, I *think* you should be OK. But I don't know for sure.
Noxious Ninja said:
Reboot into the bootloader (turn phone off, then hold power+volume down until it comes on). Then look at the end of the first line.
If it says SHIP S-ON, you're good.
If it says SHIP S-OFF, you need to run the Unrevoked tool.
If it says ENG S-OFF (which should be the case if you used Toast's method), it is indeterminate.
However, if you never used Unrevoked at all, you shouldn't have to worry about it. You can check after you run the RUU, which will reset it to the SHIP bootloader.
I believe the 3.29 RUU resets everything, including the PRI. Toast's method downgraded the PRI, and it was difficult to get it back before the current update, so this used to be a sure-fire way of telling whether you had rooted. Unless you had a bad Wimax flash and broke your 4G, I *think* you should be OK. But I don't know for sure.
Click to expand...
Click to collapse
thanx that did the trick now to the sprint store tomorrow wish me luck
If your still having trouble then try this:
http://forum.xda-developers.com/showthread.php?t=780141&highlight=unroot
I just unrooted mine last night and it only took me 5 mins, just flash the unrevoked and then do the update on the PC36IMG and thats it.
Im returning my phone to sprint and need to return software back to stock. I ran the 3.29 RUU which removed root access but when I checked the bootloader screen I see S-OFF because of unrevoked forever.
I donwloaded the s-on/off tool but I can't flash it because I'm no longer rooted and no longer have AmonRa or any recovery program.
What should I do? I need to do this tonight to return the phone tomorrow. Thanks!
Pretty sure you need to run the unrevoked forever tool to turn s-off to s-on, then use a PC36IMG, or RUU...
I believe you have to reroot then!
Dammit, I just realized I should have done it first...
lol.
Hope I don't mess this up!
Ok I got my G2 when it first came out. Used the old rage method to get S-OFF and perma root. Now i'm reading people say that they have "real" S-OFF and real permaroot. Do I have to do the "gfree" method now or is my phone good as it is?
I understand that with gfree you can unlock your SIM and you can switch between S-OFF and S-ON.. I'd like to have those functions. How should I go about it? Do I do a factory reset to go back to stock and unroot and then use gfree method or is there a simpler way to do it?
Here's what I have right now:
Stock rom, I NEVER installed any OTA's.
I have Baconbits.
My baseband is: 12.22.60.09bU_26.02.01.15_M2
Kernel: 2.6.32.21-cyanogenmod [email protected]#1
Build #: 1.19.531.1 CL255798 release-keys
Thanks for all the help.
Since you have root and a stock rom installed, just run gfree -- that is ALL you need to do. The advantage, aside from unlocking the radio, is that with the proper s-off, there is some new security for the radio... for unbricking and for being able to withstand accidental OTA updates. A true radio s-off can take an OTA update containing BOTH an SPL and a Radio, and yet s-off remains.
dhkr234 said:
Since you have root and a stock rom installed, just run gfree -- that is ALL you need to do. The advantage, aside from unlocking the radio, is that with the proper s-off, there is some new security for the radio... for unbricking and for being able to withstand accidental OTA updates. A true radio s-off can take an OTA update containing BOTH an SPL and a Radio, and yet s-off remains.
Click to expand...
Click to collapse
I'm in the same boat as the OP. How do i go about just running gfree?
sent from my V I S I O N.
Well I'm rooted with the old method as well but because I I cant flash cwm 3.x with the gree method. You need the eng hboot so ill stick with the old method until clockwork makes it work with the gfree method.
Sent from my gSpot2
PatrickHuey said:
I'm in the same boat as the OP. How do i go about just running gfree?
sent from my V I S I O N.
Click to expand...
Click to collapse
See the Wiki for details. Assuming you are running a kernel where gfree works (again, see the Wiki on this), you just need a root shell on your phone, copy gfree to your phone (e.g. via adb push), then run gfree with the appropriate options, e.g. "./gfree -f".
Sent from my HTC Desire Z
elracing21 said:
Well I'm rooted with the old method as well but because I I cant flash cwm 3.x with the gree method. You need the eng hboot so ill stick with the old method until clockwork makes it work with the gfree method.
Sent from my gSpot2
Click to expand...
Click to collapse
Using gfree does not get rid of the engineering hboot (or modify your existing hboot in anyway), so it's safe to do. And even if this was not the case, you can still flash the CWM3 recovery without the engineering hboot, only you'll have to use a different method than fastboot.
dhkr234 said:
Since you have root and a stock rom installed, just run gfree -- that is ALL you need to do. The advantage, aside from unlocking the radio, is that with the proper s-off, there is some new security for the radio... for unbricking and for being able to withstand accidental OTA updates. A true radio s-off can take an OTA update containing BOTH an SPL and a Radio, and yet s-off remains.
Click to expand...
Click to collapse
thanks for responding. so this will work even though i dont have a stock kernel?
also, as far as OTA's go, you mean that if after i run gfree i will be able to apply the OTA without it unrooting my phone?
thank you
konoplya said:
thanks for responding. so this will work even though i dont have a stock kernel?
also, as far as OTA's go, you mean that if after i run gfree i will be able to apply the OTA without it unrooting my phone?
Click to expand...
Click to collapse
Not sure about Baconbits, check the Wiki for the list of kernels that are known not to work with gfree.
If you apply the OTA after unlocking with gfree, you will still lose root but you won't lose the S-OFF and other stuff from gfree.
Sent from my HTC Desire Z
steviewevie said:
Not sure about Baconbits, check the Wiki for the list of kernels that are known not to work with gfree.
If you apply the OTA after unlocking with gfree, you will still lose root but you won't lose the S-OFF and other stuff from gfree.
Sent from my HTC Desire Z
Click to expand...
Click to collapse
ok, i see. so if i loose root would i just have to run gfree again after I install OTA to gain root back?
konoplya said:
ok, i see. so if i loose root would i just have to run gfree again after I install OTA to gain root back?
Click to expand...
Click to collapse
Not just gfree on its own, but you will need to go through the steps of getting temp root then perm root, which does use gfree as part of it. It's all in the Wiki.
konoplya said:
ok, i see. so if i loose root would i just have to run gfree again after I install OTA to gain root back?
Click to expand...
Click to collapse
gfree does NOT root your phone. It UNLOCKS RADIO SECURITY -- permanently. You only run it ONCE, you NEVER have to run it again... EVER.
With UNLOCKED RADIO SECURITY, gaining root is TRIVIAL.
What gets root is RAGE or PSNEUTER.
dhkr234 said:
gfree does NOT root your phone. It UNLOCKS RADIO SECURITY -- permanently. You only run it ONCE, you NEVER have to run it again... EVER.
With UNLOCKED RADIO SECURITY, gaining root is TRIVIAL.
What gets root is RAGE or PSNEUTER.
Click to expand...
Click to collapse
Yeah but gfree is often used as part of the rooting process, so I can see why people associate gfree with rooting.
gfree might be run more than once on a phone as part of the process to lock in root, i.e. to defeat the NAND write protection. Even though it's only needed once to unlock the radio etc, you might run it other times if you need to root a stock ROM and updates to that ROM.
gfree can be used to unlock radio security, but it has other options too. Sorry but I think your reply might confuse more people than it helps.
x
Help me please! I tried to find my answer, but i'm not sure.
Can be possible use the update.zip without any modification? Or i need change the hboot?
Thank you!
Janaboy
I'm perm rooted! but I lost the ota update cause I was simi-brick how can I get the OTA update? do I have to to a factory reset?
You should get the OTA right away after restarting the phone, I know I did after going back to stock on just Saturday of this week. The first time I connected to the network it said an update was available and it was the OTA.
that hasnt happen and it need to hurry up!! lol
So do a Factory reset?
hiya guys, im kinda in the same boat. Just got the g2 with build 1.22.531.8 and perma rooted it with visionary/rage method. I want to get supercid, sim unlock with gfree. can someone post or direct me to instructions on how to do so? thanks for helping a noob.
aok680 said:
hiya guys, im kinda in the same boat. Just got the g2 with build 1.22.531.8 and perma rooted it with visionary/rage method. I want to get supercid, sim unlock with gfree. can someone post or direct me to instructions on how to do so? thanks for helping a noob.
Click to expand...
Click to collapse
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Unlock_the_Phone.2C_Set_SuperCID.2C_and_Turn_Radio_S-OFF
Today I accidently turned it on (the thing in the bootloader) and now I can't turn it off no matter what so I can do a revert to stock .img, I used the PDI15.img or w.e that would revert back to stock forgetting that I had the newest radio and now I can't revert to stock or turn S-OFF. Please help
Current Configurations:
GLACIER PVT SHIP S-ON
HBOOT - 0.86.0000
MICORP - 0429
RADIO - 26.09.04.26_M
eMMC - BOOT
More Info:
When I use a PDIMG or w/e file it errors out as being old
Can you still boot? Like into your rom? If so just try rooting using visionary and using a root explorer to push the gfree files to data/local/ then just follow the normal rooting procedure
Sent from my HTC Glacier using XDA Premium App
Nicgraner said:
Can you still boot? Like into your rom? If so just try rooting using visionary and using a root explorer to push the gfree files to data/local/ then just follow the normal rooting procedure
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Yeah I can still boot into my rom, bootloader, and recovery and okay will try that
EDIT: Okay I did, I tried turning S-OFF but it says something about eMMC power cycle failed
XxKOLOHExX said:
Yeah I can still boot into my rom, bootloader, and recovery and okay will try that
EDIT: Okay I did, I tried turning S-OFF but it says something about eMMC power cycle failed
Click to expand...
Click to collapse
dude! I noticed this also this morning. I am rooted(using setcpu and root explorer just fine) but in hboot it says s=on. I was also wanting to flash the stock .img and start fresh. thought I was the only one having this problem. tried everything you did and got the same results.
What ROM are you on? AFAIK, gfree, requires the stock kernel to do what it does. How on earth did you turn S-ON? That sort of thing shouldn't just happen out of nowhere.
How is the progress on fixing your phone?
jdkoren said:
What ROM are you on? AFAIK, gfree, requires the stock kernel to do what it does. How on earth did you turn S-ON? That sort of thing shouldn't just happen out of nowhere.
Click to expand...
Click to collapse
currently on Evil D mTGB v1.0, Faux 0.0.7 CFS lv leak kernel. everything works fine, no FC's or anything. just having the same issues as XxKOLOHExX. I really have no idea how it turned on by itself, I dont remember doing anything out of the ordinary
I was trying to get back to stock from the rom i was on. (MIUI) and when I used the stock .img though the bootloader it went all good till it rebooted, then it said failed because the file was old and now I am stuck with s-on and I don't know how to turn it off
How did you get to the stock bootloader? Did you have eng bootloader at one point? What meth of root did you use? Alot of info missing.
Now download the stock radio.img and push it via adb or just download the PD15IMG.zip (radio only not rom included). Once this is done you can revert back to stock rom/radio using standard PD15IMG.zip (radio+rom). Now depending on the type of root you used it would depend if you still have radio flag on/off even if your reverted back to stock bootloader.
PS: You can get PD15IMG.zip (stock radio) from master radio thread and PD15IMG.zip (stock radio/rom) by doing search.
PermROOT said:
How did you get to the stock bootloader? Did you have eng bootloader at one point? What meth of root did you use? Alot of info missing.
Now download the stock radio.img and push it via adb or just download the PD15IMG.zip (radio only not rom included). Once this is done you can revert back to stock rom/radio using standard PD15IMG.zip (radio+rom). Now depending on the type of root you used it would depend if you still have radio flag on/off even if your reverted back to stock bootloader.
PS: You can get PD15IMG.zip (stock radio) from master radio thread and PD15IMG.zip (stock radio/rom) by doing search.
Click to expand...
Click to collapse
It flashed the bootloader when I flashed the PD15IMG.zip, it just stop when I did the whole procedure. Nope never flashed an Engineer Bootloader. I used theunlockr.com sites method
I tried that, it uziped then tried to flash the radio then just went back to the original menu for the bootloader
If you used the VISIONary+ (TempROOT) and root.sh (PermROOT) meth then you already had engineering hboot (0.85.2007) pushed though terminal on "/dev/block/mmcblk0p18". Now you did something in between is what I would like to know.
As you flashed new radio (26.09.04.26_M) which I am clear. But what I like to know is how did you end up with default hboot (0.86.0000)? If you had S=OFF you didn't lose it via flashing new radio. Which PD15IMG.zip did you install? Now when you say PD15IMG.zip what do you mean? It can be anything as its default mt4g system based image. Stock PD15IMG.zip = (Sense 2.2.1 Rom/Radio 26.03.02.26_M). Did you install leaked PD15IMG.zip from Panache? or GB2.3.3S?
Are you not 1 of the Royal dev's? who try to take over Silence's IG if I recall. I am just assuming here but this is why you do "NOT" dump system image via hboot. What you should have done was do complete total system wipe (format /data; /system) and then flash new edify based CWMR flashable rom.
PermROOT said:
If you used the VISIONary+ (TempROOT) and root.sh (PermROOT) meth then you already had engineering hboot (0.85.2007) pushed though terminal on "/dev/block/mmcblk0p18". Now you did something in between is what I would like to know.
As you flashed new radio (26.09.04.26_M) which I am clear. But what I like to know is how did you end up with default hboot (0.86.0000)? If you had S=OFF you didn't lose it via flashing new radio. Which PD15IMG.zip did you install? Now when you say PD15IMG.zip what do you mean? It can be anything as its default mt4g system based image. Stock PD15IMG.zip = (Sense 2.2.1 Rom/Radio 26.03.02.26_M). Did you install leaked PD15IMG.zip from Panache? or GB2.3.3S?
Are you not 1 of the Royal dev's? who try to take over Silence's IG if I recall. I am just assuming here but this is why you do "NOT" dump system image via hboot. What you should have done was do complete total system wipe (format /data; /system) and then flash new edify based CWMR flashable rom.
Click to expand...
Click to collapse
Yeah I know that, I Was trying to go back to stock everything using the unrooting method(PD15IMG.zip). Using this file I was able to get through the first step and it rebooted, then it went back to bootloader and now it won't take the PD15IMG.zip saying that it is an older file. Yes I am one of the devs, That's why before posting I tried everything I could think of, gfree, old unrooting methods, etc. I didn't use a dump lol I'm not that noobish haha
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
PermROOT said:
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
Click to expand...
Click to collapse
Thank you so much for the help
PermROOT said:
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
Click to expand...
Click to collapse
lol sorry for the extra work, just dont wanna have the chance of bricking my phone but like XxKOLOHExX I wanted to revert back to stock from mTGB using the stock PD15IMG_Glacier_TMOUS_1.17.531.2_Radio_12.28b.60.140e_26.03.02.26_M_release_155771_signed. everything he described is happening to me also, step by step. I rooted with the visionary+ and permroot method(unlockr). I did download and flash the 26.08.04.30 radio. heres what I see in hboot
GLACIER PVT SHIP S-ON
HBOOT-0.86.0000
MICROP-0429
RADIO-26.08.04.30_M3
eMMC-boot
Sep 27 2010, 11:12:59
so what youre saying is that we should try flashing the stock radio first, wipe the whole phone(including sdcard?), then flash the stock PD15IMG? Ill give it a shot real quick, thanks
*edit* hboot wont even let me flash the stock radio, itll say checking but wont actually let me update it
Well clarknick27 the problem here is that root.sh to gain PermROOT via VISIONary+ just push the 0.85.2007 eng hboot and giving temporary S=OFF, the true security flag as we know it is controlled in the radio. So when you try to revert back using stock PD15IMG (rom/radio) it reverted back to the stock 0.86.0000 hboot thus turning on the security flag on.
What you all should have done is reverted back same way you installed it. Which would have been first use PD15IMG.zip (stock radio) and then use stock PD15IMG.zip (radio/rom). I still need some sleep lol I just wokeup after sleeping 2hours.
The MT4G I tested on I rooted it via VISIONary+ and then flashed GB Leak rom not the PD15IMG.zip (leak radio/rom) which contained the 0.89.0005 hboot. So after flashing stock radio PD15IMG.zip (radio 26.03.02.26_M) I was able to flash stock PD15IMG.zip (rom/radio) without problem. Which is same as I suspected even after S=ON due to same version radio no problem. If I had newer radio after that point it would be locked out. Let me go to sleep and wakeup and ill see what happens from there. As I have clean MT4G ill have to reroot it first.
BTW XxKOLOHExX and clarknick27 just in case my account gets disabled. Do the following and report it here and ill see from there.
1) Which working rom you currently have installed on the device?
I know trying to reroot using gfree may give you similar result as my test: http://forum.xda-developers.com/showthread.php?t=1066966 < not important but unable to root on newer rom.
2) What happens when you try to reroot it using VISIONary+ (TempROOT) and root.sh (PermROOT)?
Did you try it? If so what is the end result? so post back. Ill check and go from there.
PermROOT said:
BTW XxKOLOHExX and clarknick27 just in case my account gets disabled. Do the following and report it here and ill see from there.
1) Which working rom you currently have installed on the device?
I know trying to reroot using gfree may give you similar result as my test: http://forum.xda-developers.com/showthread.php?t=1066966 < not important but unable to root on newer rom.
2) What happens when you try to reroot it using VISIONary+ (TempROOT) and root.sh (PermROOT)?
Did you try it? If so what is the end result? so post back. Ill check and go from there.
Click to expand...
Click to collapse
1) currently running Evil D's mTGB v1.0 rom with Faux's 0.0.7 CFS LV leak kernel. tried rooting with visionary and terminal first, no success. I then tried out the gfree method, and got "Attempting to power cycle eMMC...failed. Module failed to load: No such file or directory."
2) I installed Visionary using Astro file manager, then run Visionary. I click on "temproot now" and it starts, but then the screen goes black and doesnt do anything. I have let it sit on the black screen for well over 15mins before with no luck. I can click on "attempt to permroot" and it will ask for permissions and reboot and everything. my s=on but I still have root access and 0.86.000 bootloader. this is what I see using terminal before rebooting to see if s=off
Did you do the Radio S=OFF using gfree? If so that would explain why you still have root as security is disabled on the device totally. If thats the case then just push the eng bootloader manually via adb or though terminal and reboot. For now XxKOLOHExX is locked lets see what I find ill post back for him.
PermROOT said:
Did you do the Radio S=OFF using gfree? If so that would explain why you still have root as security is disabled on the device totally. If thats the case then just push the eng bootloader manually via adb or though terminal and reboot. For now XxKOLOHExX is locked lets see what I find ill post back for him.
Click to expand...
Click to collapse
thanks for taking the time to help out, Ill give it a shot
*edit* just tried pushing the eng bootloader through adb and it didnt stick or flash, rebooted into hboot and it still says 0.86.0000, s=on, 26.08.04.30_M3 radio
Back when the very first version of Creamed Glacier came out, I did the whole root, s=off, and CWM think to flash it. Of course at the time it wasn't terrible stable, so I found a PD15IMG.zip down load and just reflashed stock with out manually disabling s=off or anything.
Does that mean that I still have s=off and I can just install CWM5 via the fastboot method to flash newer and more stable ICS ROMs without having to go through the process I did the first time? Reading around this forum, I'm leaning towards my answer is yes, but I want to make sure before breaking my phone or something.
Yes you do have S-OFF I believe. Boot into your bootloader and look at tbr very top and you'll see it say S-OFF or S-ON. Now if its off, I think you can flash CWM. But not sure...so root again without S-OFF. Sorry, this isn't my area of expertise.
Sent from my Sense 4.0 Glacier using XDA Premium.
It probably says that you are s=off but you will still want to reroot the phone if you returned to stock with pd15img. also make sure to return to froyo radio and check your android version #. If it is gingerbread then downgrade before attempting to reroot or it probably wont work and may possibly brick the phone.