ok here's the deal.
i accidentally broke the black antenna piece. and everythis just jumped out. an i was able to find everuthing back exept the connectionpiece.by this i mean a small copper plate whitch connects the internal antenna to the cilinder whitch holds the spring.. ever since i lost this piece, my connection is bad. is there anyway to restore this again, because i tried to fix it with some aluminiumfoil, but in the way i did it, it seemed to make things worse..
plz help.. i want to keep my xda
Good opportunity to upgrade your HW
that ofcourse is not the answer i was waiting for. isn't there anyone who can help me???
tnx for the tips guys:S... solved it.. used a copper earring to fix the problem.. LOL i now have a better range as b4
i have problem with my i mate jasjam my mobile had been fallin down on the ground then after that it refused to open i remove the battery and try to make soft reset but no way the same problem i put it on the charge but the red ligth is open but also it refused to open please help
what do you Mean by refuse to open ? I have an I mate jasjam.... Explain in Detail so I cna help you/ also tell me What Rom you are running ?
check your battery connections.
Guy,
You dropped your phone on the ground. It doesn't work now. Ergo, it's broken. BROKEN. No amount of urgent calls for help in a forum are going to miraculously repair it. You broke it. Deal with that idea. Let it sink in. It's broken for crissake. Take it in for repair or throw it away.
Would you prefer we use our goth innernet skillz and incant the sekret majic charm to repair it from afar?
Sheesh.
douginoz said:
Guy,
You dropped your phone on the ground. It doesn't work now. Ergo, it's broken. BROKEN. No amount of urgent calls for help in a forum are going to miraculously repair it. You broke it. Deal with that idea. Let it sink in. It's broken for crissake. Take it in for repair or throw it away.
Would you prefer we use our goth innernet skillz and incant the sekret majic charm to repair it from afar?
Sheesh.
Click to expand...
Click to collapse
Not true and no need to be an asshat! mine tumbles to the ground quite a bit and has stopped working numerous times, everytime i've fixed it.
To the original poster, please provide more info and you might get more help, what you're describing is very vague.
Hello;
It's been like a month that I have this problem, my bluetooth won't connect and neither is my wifi. The wifi sometimes connect with like one bar, the signal strength is awful and you have to be like 1 feet away of the router because if you move farther it disappears. I have tried to boost this in the settings by better performance but it doesn't make a difference.
In the other hand the bluetooth is not working at all, I tried to connect to my laptop and is like there's no bluetooth device in the area, tried it with my headset and get the same thing.
It's really frustrating cause this two features are very important for my daily use of this phone, so if someone now what to do please let me now.
Appreciate it!
Same here!
I have the exact same problem and apparently by the lack of posts anywhere on the internet nobody has an answer.
im having EXACTLY the same issue. im gonna open it up and see whats up.
The answer might lie within?
Try this link? What you're looking for might be somewhere in amongst these threads? http://forum.xda-developers.com/search.php?searchid=48353718&pp=25:confused:
can you repost that link? its saying search is down..
edit: working now.
???
I get a "Sorry - no matches. Please try some different terms." message.
???
nothing worth noting on the link. im gonna send mine back to htc..
I'm hoping someone will get to the bottom of this as i miss my wifi.
All was working fine on my phone until I had to take my phone apart because the plastic led shield had come lose and was touching the vibration device causing a strange noise.
So i managed to get the phone apart and push the led plastic cover back into place, i didn't touch anything else. I put the phone back together and all worked fine until i tried the wifi. Nothing, it turns on but stays as scanning and never finds anything even if its right next to the router.
I was advised in another thread that one of the cables might have come loose as i took the phone apart so i opened it up again but couldnt see anything wrong.
I'm just wondering if its a software issue somehow. As i never touched any part of the board, or antenna etc whilst it was apart and like i've said i couldnt see anything out of place or loose. Whether a hard reset will solve the issue i dont know and its a pain to do really.
I haven't tried bluetooth, but considering it looks to work off the same antenna that too might have broken.
maybe solved
find bttrayce.exe or bttrayce.lnk in windows folder
run it and check them
copy lnk file to startup folder
restart
this is for wi-fi too .
I've run bttrayce.exe and the ink file is in the start up folder.
This hasn't made any differance.
enable wifi n mode using registry editor like total commander or resco, go to:
HKLM/Comm/BCMSDDHD1/Parms/11nModeDisable = Change from 1 to 0
or, install bsb tweaks and enable wifi n mode.....
or, the best answer is to flash a new radio-improves bluetooth, data, wifi and call signal
malanga3 said:
Hello;
It's been like a month that I have this problem, my bluetooth won't connect and neither is my wifi. The wifi sometimes connect with like one bar, the signal strength is awful and you have to be like 1 feet away of the router because if you move farther it disappears. I have tried to boost this in the settings by better performance but it doesn't make a difference.
In the other hand the bluetooth is not working at all, I tried to connect to my laptop and is like there's no bluetooth device in the area, tried it with my headset and get the same thing.
It's really frustrating cause this two features are very important for my daily use of this phone, so if someone now what to do please let me now.
Appreciate it!
Click to expand...
Click to collapse
did you hard reset and the problem persists? then it is a hardware issue, send it to htc.
Hopper81 said:
I'm hoping someone will get to the bottom of this as i miss my wifi.
All was working fine on my phone until I had to take my phone apart because the plastic led shield had come lose and was touching the vibration device causing a strange noise.
So i managed to get the phone apart and push the led plastic cover back into place, i didn't touch anything else. I put the phone back together and all worked fine until i tried the wifi. Nothing, it turns on but stays as scanning and never finds anything even if its right next to the router.
I was advised in another thread that one of the cables might have come loose as i took the phone apart so i opened it up again but couldnt see anything wrong.
I'm just wondering if its a software issue somehow. As i never touched any part of the board, or antenna etc whilst it was apart and like i've said i couldnt see anything out of place or loose. Whether a hard reset will solve the issue i dont know and its a pain to do really.
I haven't tried bluetooth, but considering it looks to work off the same antenna that too might have broken.
Click to expand...
Click to collapse
so wait, you take the phone apart, put it back together, then it doesn't work, yet it isn't your fault? I hope you didn't screw up the void sticker covering the one screw when you did this, because you obviously damaged the the wifi cable in some way.
Obviously i'm aware that what ever has happened is my fault, my point was that if i'd taken it apart and knew i'd done something that might have damaged the board etc then that's fine I would be able to pinpoint what it was, but as i didnt do anything really especially to the main phone just the back case it's just a little odd.
Void sticker is fine.
seems like an antenna problem, there is a cable on the side of the phone with the volume rockers, there will be a cable going to the top board to the bottom board this cable attaches and can be removed. try to remove then reattach the cable
http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
the cable is on 2:38 of this video.
Right I took my phone apart again this morning to double check everything. I noticed the cable attached at the bottom as mentioned in previous post. It lifted off a bit too easily, so I positioned it correctly and pushed it back down, my WiFi now works. So that was my issue.
So my advice would be if both your Bluetooth and WiFi do not work, it is more than likely the cable is lose. (more likely if your phone has been a part obviously)
Thanks for everyone's help and advice on here.
I had the same problem with my GPS. I took the phone apart and found that the GPS unit was connected to an amplifer via two gold prongs. The connection was not flush, so I stretched the prongs abit (not too much) to improve the connection and put the phone back together. The problem was now fixed.
From memory I think the bluetooth and wifi worked on the same principle, and I think the amplifier states what its function is.
Hope this maybe some help.
Hello Guys,
I just got my HD2 from repare, had to change the screen since it became unresponsive.
After I got it back, installed both WP7 and Anrdoid on it, I found out that the phone is not detecting any wifi networks. I tried in both WP7 and Android, and both of them do not detect any wifi networks. So it looks like when they changed the screen, they messed up WIFI connectivity. I'm guessing they might have forgotten to connect one of the connectors.
I am planning to take it back to them, but I was wondering if any of you knows which connector is for the WIFI, and if its easily visible once I take the back cover off, since I already done that before.
Thanks in advance
Hi dude,
if a connection is a problem and you even going to find it don't do it yourself.
it's a pretty small and gentle stuff, so you must know what you doing and how to connect them. Obviously you will need some serious tools.
my guess if you had all that - you already been doing this and not asking here.
so advice - not touching anything, not making it worse.
Best case: the connector came loose (which is not all that uncommon). It's the connector on the black wire on the top right side of the main board.
Worst case, they broke off a contact (which is also quite common).
Either way, don't try to repair it yourself but bring it back to the repair shop. If they accidentally broke off a contact then that requires a professional repair.
Thanks guys.
After some tests, I found out that the phone does detect wifi networks, but have extremely bad reception. I have to be very close to the wifi router for it to detect the network.
Any idea what might be causing this?
wessamzeidan said:
Thanks guys.
Any idea what might be causing this?
Click to expand...
Click to collapse
Like I said, either a loose connector or a contact has broken off. That will give you about 1 bar of reception while sitting next to your router...
Guys so I got my G2 since last year or less since I bought it he was losing mobile network reception every 30min.. Lose it then it reconnects itself... It started to annoy me too much so I found some solution on internet to put little pieces of cardboard under the connectors which are located on the back cover of the phone. i done that and it worked till now... Problem appeared again but this time Im out of ideas, I changed pieces of cardboard rearranged them but still it loses signal from time to time and its a big problem for me... I really like this device and its community but I think that I will be forced to sell it if i dont solve this.. I was thinking about buying new back cover but I dont think that would help? Anyone experienced this problem, or if anyone has idea how to solve it permanently please tell me.