Well, as I have less than 10 posts the only option I had was to create a new topic in this area.
I am facing the following problem: when I use FroyoBread V003 ROM (I could not test older versions) I get WIFI extremely slow and almost impossible to navigate. This is not the first time it occurred for me, the same happened with Floyo 0.20, it does not happen with all ROMs, in some the wifi works normally. But it is the first time that I report the problem. Someone who has faced this problem has a solution?
Thanks in advance, and sorry for my bad English.
I have the same problem with floyo 0.20 !! I use elelinux now and it works perfectly but on floyo the internet is very slow .... can someone help us please
Sent from my X8 using Tapatalk
I've already written about it in doixanh's thread. He's taken libs, also wifi libs, from racht's floyo, and those libs have issues with some types of routers, like netgear. I proposed that he took wifi libs from miniCM or Elelinux, but got no reply
using root explorer go to system/etc/wifi and open tiwian.ini and look for
Single_dual_band_solution=...
were it says = if its 0.1 or 0 change it to 1 that what i did on those 2 roms and i now get class g+ rating it about 2.4mibs 0.1 comes in at class "a" and if you change it to a 1 it bring the class to a g net rating uk standeds hope that helps
BIG JD said:
using root explorer go to system/etc/wifi and open tiwian.ini and look for
Single_dual_band_solution=...
were it says = if its 0.1 or 0 change it to 1 that what i did on those 2 roms and i now get class g+ rating it about 2.4mibs 0.1 comes in at class "a" and if you change it to a 1 it bring the class to a g net rating uk standeds hope that helps
Click to expand...
Click to collapse
Thanks for your reply. I will try to do what you said, and edit the post with the result.
Thanks again...
Do it then because i have this problem on floyo 0.20 report back fast!
Sent from my X8 using Tapatalk
Doixanh provided us with v004 with wifi libs taken from miniCM. I don't know if he changed tiwnal.ini too, but the problem is solved.
I tried to edit the file tiwlan.ini, but had no success, the wifi continued slow, I might have done something wrong, I do not know. But hopefully the 004 version of the ROM FroyoBread corrected this problem.
Thanks for all the answers.
BIG JD said:
using root explorer go to system/etc/wifi and open tiwian.ini and look for
Single_dual_band_solution=...
were it says = if its 0.1 or 0 change it to 1 that what i did on those 2 roms and i now get class g+ rating it about 2.4mibs 0.1 comes in at class "a" and if you change it to a 1 it bring the class to a g net rating uk standeds hope that helps
Click to expand...
Click to collapse
I do this but it still the same .... on floyo 0.20 ... maybe some other solutions please?
Sent from my X8 using Tapatalk
Related
Hey
I have got a liquid and i am trying to find the best and fastest ROM i can think off .
I got Evild 2.1 atm ( Latest Version ) and everything is working great.
I thought about trying another ROM but i am to scared to brick my phone.
So i thought lets try different ROMs and bench them and post scores here.
I would like to start with the ROM http://forum.xda-developers.com/showthread.php?t=635219
Cleaned Everything Opened with Advanced Task Killer
No Live Wallpaper during the test ( Not sure if its any different )
3732
3704
3693
3695
3683
Good ROM , No Bugs Live Wallpaper Works.
Free RAM 48M ( Atm ) Nothing Opened That Task Killer can show
Thanks for watching.
Please post your scores and what ROM ETC
Cheers
EDIT :
Tested with Benchmark Pi ( Download for market )
With Linpack:
5.535
5.529
5.23
5.558
5.529
47Mb free with autokiller, livewallpaper battery indicator and handcent sms
I'm with Xian v0.5b (only bug: sms FC every time, so I use Handcent)
http://android.modaco.com/content/a...com/305599/rom-xian-v0-5b-liquide-mod-desire/
macolino said:
With Linpack:
5.535
5.529
5.23
5.558
5.529
47Mb free with autokiller, livewallpaper battery indicator and handcent sms
I'm with Xian v0.5b (only bug: sms FC every time, so I use Handcent)
http://android.modaco.com/content/a...com/305599/rom-xian-v0-5b-liquide-mod-desire/
Click to expand...
Click to collapse
sounds interesting.. but i have two questions though
is it based on the new BIN with multitouch support?
does google navigation work correctly?
Yes, xian 0.5b is based on new bin with multitouch and yes, google navigator works well.
My linpacks are same from 5.22. to 5.589.
Known problems:
SMS apk FC always, you ave to use handcent.
blueex doesn't work, i use bluetooth file now.
sometimes wifi or 3g connection don't work, i don't know why.
All other is perfect. Smooth, fast, Live wp, etc.
Only, i'm searching for a launcher eclair with 5row...
LoganX78 said:
Yes, xian 0.5b is based on new bin with multitouch and yes, google navigator works well.
My linpacks are same from 5.22. to 5.589.
Known problems:
SMS apk FC always, you ave to use handcent.
blueex doesn't work, i use bluetooth file now.
sometimes wifi or 3g connection don't work, i don't know why.
All other is perfect. Smooth, fast, Live wp, etc.
Only, i'm searching for a launcher eclair with 5row...
Click to expand...
Click to collapse
that's weird because the new BIN seems to have a navigation problem as it goes backwards,,
it's in all ROMs based on the new BIN so I'm wondering how could xian rom doesn't have that issue..
Got 3.605 with Liberated 1.3.1
Cheers
Ninlour said:
that's weird because the new BIN seems to have a navigation problem as it goes backwards,,
it's in all ROMs based on the new BIN so I'm wondering how could xian rom doesn't have that issue..
Click to expand...
Click to collapse
Yes there is a navigation problem because the compass doesn't work well but it's not a problem of rom but of BIN. Anyway, I use sygic and it doesn't work with compass... no problem with sygic
piter1225 said:
got 3.605 with liberated 1.3.1
cheers
Click to expand...
Click to collapse
is it a new built?
Please get my excitment filled!
which is better, higher or lower?
Higher is better... anyone know when the official liquid e rom or device is due?
my gf's on a liquid and i see shes envious of my 2.1 liquid plus she has some issues with battery and performance on her stock liquid so looking to upgrade her rom asap...
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Higher is better... anyone know when the official liquid e rom or device is due?
my gf's on a liquid and i see shes envious of my 2.1 liquid plus she has some issues with battery and performance on her stock liquid so looking to upgrade her rom asap...
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
if u want a fast (I mean real fast and snappy) and if you don't care about Google navigation go ahead and download evil D 2.1.9 ROM
Sent from my Liquid using the XDA mobile application powered by Tapatalk
mattc's NexusLeo v1.1
This is a brand new build. It is almost a complete opposite of my Sense build. The base for this ROM is from Google's official Nexus 2.2 Froyo FRF91. This is *stock* Android.
The kernel is michyprima's overclockable to 1190.400MHz and undervolted to 925mv. It also has the latest GIT updates. I found this combo to be the most stable while producing amazing speeds. michyprima's post can be found here: http://forum.xda-developers.com/showthread.php?t=756513.
What's Not Working:
WIFI tethering
Bluetooth Headsets not working for calls. Streaming media is working fine.
USB Tethering
PPP
What is working:
Bluetooth Streaming Media
Wifi
EDGE/3G/HSDPA Internet
5MP Camera w/flash
Standard Definition Camcorder w/flash
All other items working on other builds, too many to list
Known Issues:
Internet can be slow. This is because of the use of RMNET and should be fixed in future builds.
There are occasional touchscreen freezes. With the new kernel I have noticed a decrease. Normal touchscreen functionality usually returns after 10 seconds or so.
Tips:
Use SetCPU to overclock. The max default is set to 998MHz.
Turn off live wallpaper for better performance and battery life.
Don't use the built-in USB Storage capabilities. While it works, it may cause corruption of your Android system files requiring a fresh install.
Use a program called "droidexplorer" which safely transfers files using adb.
I have included a Task Manager. Learn to use it religiously to improve battery life.
Other Notes:
CPU scaling is enable by default without SetCPU. There is nothing you need to do to overclock it is enabled by default.
This is a VERY basic build. Don't expect to see any Sense widgets, apps, etc. Check out a stock Nexus One and that is what you are getting.
I have included Astro File Manager as well as a Task Killer.
Installation Instructions:
Download which build you like. You can choose from a 512MB, 1GB, or 2GB storage option.
Unzip the contents to your SD card. All of the files should extract into a folder named "Android".
Use an autoloader or, in Windows Mobile, browse to the Android folder on your SD card and run CLRCAD.exe, then Haret.exe.
Let Android boot. The first boot is always the longest and larger data sizes require longer times. The 2GB can take up to 20 minutes depending on your card speed.
Enjoy Android.
Note: If you are having a looping boot issue, please replace the startup.txt with the one attached at the bottom of this post.
DOWNLOADS:
V1.1
512 MB Data: http://www.multiupload.com/C1SOCF726I
1 GB Data: http://www.multiupload.com/SGQWC9VZ3R
2 GB Data: http://www.multiupload.com/R7XB0BV5UK
V1
512 MB Data: http://www.multiupload.com/LK0DRVOB50
1 GB Data: http://www.multiupload.com/LQD232H4WR
2 GB Data: http://www.multiupload.com/710FX6XZWY
Kernel Sources (note: nothing below is required for you to run Android. Everything listed here is already included in the download).
The latest kernels can always be found here: http://oe.netripper.com/files/htcleo_autobuild/
Code:
[URL="http://forum.xda-developers.com/attachment.php?attachmentid=383706&d=1282234134"]zImage[/URL] [URL="http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-msm-2.6.32"]Git[/URL] [URL="http://forum.xda-developers.com/attachment.php?attachmentid=383706&d=1282234134"]Modules[/URL] [URL="http://forum.xda-developers.com/showpost.php?p=7534098&postcount=1"]Diff[/URL]
Changes to kernel logged by huanyu:
In this kernel, I have enabled the follows:
•Conservative CPUfreq governor
•Conservative governor is the default CPUfreq governor
•Voltage goes down to 1000 mv (zImage_1000mv) or 925mv (zImage_925mv) or 1050mv (default voltage)
•Overclocking to 1.113 GHz max.
Remember, I hold NO responsibility for anything that goes wrong. I'm simply providing the kernel, whatever happens with it is on your shoulders not mine.
If you do not like the overclocked feature, you can use SetCPU to disable it.
minor tweaking to drivers/cpufreq/cpufreq_ondemand.c
•#define DEF_FREQUENCY_DOWN_DIFFERENTIAL (30)
•#define MICRO_FREQUENCY_UP_THRESHOLD (65)
•#define MICRO_FREQUENCY_MIN_SAMPLE_RATE (9500)
minor tweaking to drivers/cpufreq/cpufreq_conservative.c
•#define DEF_FREQUENCY_UP_THRESHOLD (65)
•#define DEF_FREQUENCY_DOWN_THRESHOLD (30)
Click to expand...
Click to collapse
Thanks to all of the devs working on kernel. Also, thanks to Darkstone and shu8i for their great work and support on other builds. Shatterv2, ShadowFoxBiH, and BazGee for beta testing. Mom...
As always, donations are appreciated but not required.
Change Log
Change Log:
1.1:
Using michyprima's kernel #33 based on updated GIT, which adds:
Overclockable to 1190.400MHz using setCPU
Physical "END" button can now end calls
Stops battery charging when full
Added LED and Keypad light support
Made changes to solve TMOUS MMS issues
Improved battery life
Improved speed and stability, phone app crashes eliminated
No longer overclocked out of the box. You must use setCPU if you wish to overclock
thank you, its working flawless so far
if i find bugs, i'll report em
Safe and stable build in my eyes. Been using Test build for a day now and works smoothly. thanks for your hard work matt
WOW. you mean this is actually fast than the N1!!!
Thanks a lot. downloading now
Wow, finally an official full ram version of a mattc release
I am an ardent follower of your releases, bordering on religious zealotry. Plus, stock froyo with no Sense baggage. I expect this thread to explode within the next few hours...
as always, many many thanks for your hard work.
Will give it a try & report..!!!
Well earlier posts say it is fast & better, hope I find the same result..!!!
Thanks..!!!
Thank you for this build.
I don't like the HTC Sense.
I have used the dan1j3l-LeoFroyo v1.0 for a while.
I will try your new Nexus One build.
I have six words for you spimonkey....
Thank You, Thank you, Thank you!
Been using 1.5 for a while now and its all round pretty amazing, Cant wait to try this build.... downloading now
Oh an by the way.... THANK YOU
tytung said:
Thank you for this build.
I don't like the HTC Sense.
I have used the dan1j3l-LeoFroyo v1.0 for a while.
I will try your new Nexus One build.
Click to expand...
Click to collapse
some like sense some dont.
I would like to see a sense version by mat
thank, i love this build. smooth and fasssssstttttttt.
Thanks!!!!
Sent from my HTC Desire using XDA App
Ultimaex said:
some like sense some dont.
I would like to see a sense version by mat
Click to expand...
Click to collapse
Agreed, I like sense way more than the stock version. But I'm still gonna try this build out.
Trying this build right now..
Will post the review in few mins.
love this stock froyo build i hate sese
Downloading now.. amazing work.. too bad BT call audio is not working.. if there's any way we can copy modules from V1.5 which have it working let us know...
This is ohh... so exciting... LOL
Nice Got my first Quadrant over 1450 . 1667 now.
does this include the new kernel released today @ http://htc-linux.org/wiki/index.php?title=Leo/UpdateKernel
if not can it be used with this build with the given instructions?
Sent from my HTC HD2 using XDA App
bizmark03 said:
does this include the new kernel released today @ http://htc-linux.org/wiki/index.php?title=Leo/UpdateKernel
if not can it be used with this build with the given instructions?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
It doesn't use that one but feel free to try any kernel you wish. They should work.
Any random screen freezes? I'm going to give it a shot anyway.
Sent from my HTC Desire using XDA App
What is the most stable Gingerbread ROM for the Vibrant that is suitable for everyday use?
I've looked at CM7 but I saw a post that said it was an experimental ROM and full of bugs. Is that true?
Thank you
I am on CM7 build 56 and after some tweaking (GPS fix, build.prop edits), it runs great with good battery life, and I found everything I needed in the dev. forum.
Same. I'm on CM7 build 56. GPS fix + recent battery drain fix = awesome, Fusion-quality rom
BTW what those build.prop edits are ? Haven't heard of them, can anyone pls send a link ?
svladimir said:
Same. I'm on CM7 build 56. GPS fix + recent battery drain fix = awesome, Fusion-quality rom
BTW what those build.prop edits are ? Haven't heard of them, can anyone pls send a link ?
Click to expand...
Click to collapse
Please point me to the battery fix your talking about here. Thank you!
buidoitieutu said:
Please point me to the battery fix your talking about here. Thank you!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1174846
svladimir said:
http://forum.xda-developers.com/showthread.php?t=1174846
Click to expand...
Click to collapse
Thank you! I tried that already but I don't get force closed
I didn't get either.
Have just played with different options then have turned radio off/on and that helped.
most stable asgard ----cm7 miui (in case if vibrant) nothing stable ///
Asgard by a long mile. I'd run it now if it weren't for the blurry MMS that most (all?) GB roms have.
svladimir said:
Same. I'm on CM7 build 56. GPS fix + recent battery drain fix = awesome, Fusion-quality rom
BTW what those build.prop edits are ? Haven't heard of them, can anyone pls send a link ?
Click to expand...
Click to collapse
They are here and fixing the deep sleep issue (found in the op of that thread) cured my battery woes.
Miui Revamped or Malice V4
Sent from my T959 using XDA Premium App
Mailce V4:
http://forum.xda-developers.com/showthread.php?t=1169800
Try simply honey....I have been using it for a long time...its really smooth and fast
..
Sent from my SGH-T959 using XDA App
I thought there was an official Gingerbread roll-out in mid-April for the Nordic countries. Has anyone made a ROM based on that?
Juwe's port is the best for me. Tried Revolution and Malice and all were exhibiting same problems. The Juwe 5.1 is blazing fast yet to encounter any lag what so ever no hang up bug. However it does experience occasional soft re-boot and that could be due to TW Luncher issues also I have seen where my radio for voice and data would stop but reboot fix it.
Revolutionary rom is much more stable than cm with battery life that can rival most froyo roms. its also hardware accelerated (wich means way more smooth than cm7 and is capable of playing 720p flash videos on the web ).
miui
flash the official miui rom and then miui energy 7.1 with working gps.
then edit the build prop and calibrate battery
Trigger redux with the glitch kernal.
Why isnt 800 ppl posting this?
Sent from my SGH-T959 using XDA Premium App
energy 7.1 for me has been awesome with a few tweaks. I just cant get over how cool miui is!
MALICE 4.1.1 jvq is fast stable and locks gps in 10-15 secs
Sent from my maliced vibrant using XDA App
[Q] Want to Upgrade Cm7.1 - Cm7.2 Rc2 or MIUI or Cm9
I jst want to Upgrade mY Defy RED Lens from cm7.1 Rc1 to a better version ..
having some network problem in last two weeks ...
I thought to try
cm9 - but its still on development
cm7.2 Rc2 - but read some battery drain problem in XDA
cm7.1 stable - Ya its ok as its on cm Official site .
or miui with 2.3.7 - I jst wanna try how it exceeds
My needs are
Good bettery life - im getting 3-4 days on average use . no 3g or wifi . jst calls and sometimes mp3.
Game support - i like to run nfs shift always when im free, or some funny games. no need of any HD games
So friends can u please suggest which ROM shuld i choose ...
I Dnt wanna flash my phone repeatedly to test the ROMS .. Always prefer to hear what others says and will try and choose myself ...
-------------------------------------------------------
Ok I Installed MIUI 2.4
I am running the lastest CM7.2 but quartx and cant fault it yet. I have run the v6 supercharger script and it seems really good. I got rid of the ADW launcher and put on GO only for looks but I think GO seems a bit slower, I ,might have to try ADW again but try different themes.
I use 3G and get about 3 days out of it but usually about 1 hr of calls in there in a day so that would drain it, But dont play many games maybe 5 mins a day if that. I find it really good but as I upgraded to 2.3.6 I am stuck with a few ROMS and this is the best so far.
Installed MiUI 2.4...
thanks Kelly ...
I jst installed MIUI 2.4 ....
a data wipe and complete reinstall of MIUI and reboot took a total time of 5 Min..
Awesome ...
Ya Its Looks is Simply Superb and im tweaking things ...
Bt I Miss a APP Drawer in it by default . first thought its a bug...
They all say to use a Alternative launcher if App Drawer is need...
Yea you can try another launcher from the market. Miui is nice as it gives that iPhone look. Try v6 supercharger to. Big difference!!!
Sent from my MB525 using XDA
I think MS2Ginger is the best option for you. No battery drains, good battery life, good game support, stable, etc. I use CM7.2 nightly for defy+ on my red lens by Quarx. Is so good, smooth, stable, good battery life
Enviado desde mi MB525
kidrobot52 said:
Yea you can try another launcher from the market. Miui is nice as it gives that iPhone look. Try v6 supercharger to. Big difference!!!
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Garuxa said:
I think MS2Ginger is the best option for you. No battery drains, good battery life, good game support, stable, etc. I use CM7.2 nightly for defy+ on my red lens by Quarx. Is so good, smooth, stable, good battery life
Enviado desde mi MB525
Click to expand...
Click to collapse
thanks guys . r8 now im checking the MIUI ..
One things i want to mention is its has everything i want by default & an awesome UI. so i dont need to install separate apps..
Like Music Player with folder listing,
Stock Sms with password Lock,
File Browser with all options and fast loading image browser,
Data Traffic monitor and firewall.
Missed many of these in CM7 Rc1.5...
will check ms2ginger..
kidrobot52 said:
Yea you can try another launcher from the market. Miui is nice as it gives that iPhone look. Try v6 supercharger to. Big difference!!!
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Ya im Planning to try supercharger ...
But is there any tweaks that i try for a improved performance ..
Like a Kernal Update or something Like that ???
Questions go in the Q&A section
Hi guys,
I have been join this forum for a month. You guys are amazing, I got all my answers from yours.
As my topic name, My defy plus is running with Cm10 Quarx build Nov-02. Sometimes it take over 7s for launching and loading the contact list after I hit the phone icon. I tried with many builds but this problem still exist. Actually, as I noticed, it doesn't happen if my defy plus run on Gb room.
Is this known problem on Cm10 build? Do we have solution for this cause I tried with Oc, V6Supercharger on my defy.
Thanks.
Sent from my MB526 using xda app-developers app
Does anybody have the answer or solution for my question I really want to know its reason. Now I'm using the 3rd application for overcome this.
V6 super charger worked for me..zOOM... zOOM...
V6 supercharger worked for me...... but keyborad and dial pad lags on almost all builds after cm7 stable version.
hacktheheaven said:
V6 supercharger worked for me...... but keyborad and dial pad lags on almost all builds after cm7 stable version.
Click to expand...
Click to collapse
It doesn't work on my phone, even I got 100% supercharger, still take long time for phone contact get displayed. My CM version is Quarx - 20130110.
mnhv84a said:
It doesn't work on my phone, even I got 100% supercharger, still take long time for phone contact get displayed. My CM version is Quarx - 20130110.
Click to expand...
Click to collapse
Have you tried Brain master tweaks....??? check that out It might improve your performance
http://forum.xda-developers.com/showthread.php?t=2080556&highlight=bm+tweaks