[Q] WP7 - Packages - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

Well Im stuck with my replacement brick, HD2 and I the only thing that really kept me from throwing it out my window was that I had WP7 on it. Sad stories aside, I stumbled my way through getting it on there. I really had no clue what I was doing other than clicking everything I saw, so Im as much a noob now, as I was then. Maybe someone could slap me in the face with a couple of links directing me to what I need installed, please. I have some files on my desktop still, but I've deleted some of the others; making them useless. Also, if you could throw in a dual boot on android and WP7, that'd be freakin' amazing.

If I were you I'd:
1: Boot the phone into bootloader (power on while pressing volume down key)
2: ensure HSPL 2.08 is installed
3: Perform task 29
4: install radio 2.12.50, 2.14.50 or 2.15.50
5: install MagLdr 1.13
6: Flash one of the new NoDo custom WP7 ROMs.
Use search function and you'll find everything you need

Related

[TUT]MAGLDR Help[TUT]

Okay, everyone having problems seems to be steming from the same issues. One of the biggest seems to be: not reading. I read through about 22 pages, and kept seeing the same questions, most that had been answered.
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it. Next make sure the winmo rom you have supports the 576mb rom. Most wont say if they do. If you arent 100% sure, search for one and flash it. I was using a dexter build, and everything worked flawless for me.
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
The volume rocker is up/down. Send/Green=Select/Enter. Home=Back. To load up your old android sd build go to settings and tell MAGLDR where the build is located. Note: There is an issue with loading sd builds, so most will not run correctly, if at all.
Now its time to install an Android NAND build. I used DFT's stock android build. Download it. Disconnect phone from cpu. Run the #4 option in MAGLDR by using the volume key and send/green. Run the rom update utility on the pc. When its says searching for usb, plug in the phone, and installation should continue. When its done, it should reboot and load into NAND Android.
If anything fails, start from square one. Install a stock shipped winmo rom. This will overwrite nand and HSPL. So your old NAND Android rom will be replaced, as well as your old HSPL. Re-flash the HSPL3 and continue.
Things to take note of: MAGLDR installs after the second nand check. Meaning you can change the first splash screen, not the others. I'm on US TMO HTC HD2 1024, and everything works perfectly. If you have robot voice, activate and deavtivate speaker phone, it should work. If not, reboot phone, and let it sit for about 10 minutes and it should work fine. AFter installation to retuen to MAGLDR hold the power button when turning the device on. Most importantly: READ. People arent answering your questions because they have probably already been asked and answered multiple times.
Also, see MAGLDR.nbh's posts (http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19) about MTTY and task29. It seems to have helped alot of people having more cpu os dependant issues.
This wont help people with the stuck on go go go problem.
I fix however is being worked on.
bazgee said:
This wont help people with the stuck on go go go problem.
I fix however is being worked on.
Click to expand...
Click to collapse
Depends on which go go go problem it is. And if you follow the steps correctly, it should. But it should help alot of the people who have no idea where to start.
lamario said:
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it.
Click to expand...
Click to collapse
I understand you're trying to help people, but at least try not to feed them wrong information with typos and what not.
2.08 HSPL, not 2.80.
You're going to have new flashers pulling out their hair looking for a non existent HSPL.
lamario said:
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
Click to expand...
Click to collapse
not daf.exe... but ROMUpdateUtility.exe
And there are some issues to fix... the bootloop... for example!
My HD2 won't boot after installing MAGLDR, what should I do ? It's stuck at boot screen.
magldr.nbh said:
battery out.
back in.
hold down volume down and power button (red/end/power).
release power.
connect to computer in tri-colour hsplCOTULLA bootloader screen/mode.
use mtty drivers just like task 29 with signature enforcement off (see mtty thread etc etc etc).
do task 29 here first (see mtty thread also).
--- then once clean ---
run romupdateutility from magldr archive whilst in tri-color screen (as if you skipped task 29)...
re-flash magldr.
goto usb-flasher in magldr menu.
connect usb.
run DAF.EXE.
Click to expand...
Click to collapse
what can i do about the Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)?
lamario said:
Okay, everyone having problems seems to be steming from the same issues. One of the biggest seems to be: not reading. I read through about 22 pages, and kept seeing the same questions, most that had been answered.
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it. Next make sure the winmo rom you have supports the 576mb rom. Most wont say if they do. If you arent 100% sure, search for one and flash it. I was using a dexter build, and everything worked flawless for me.
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
The volume rocker is up/down. Send/Green=Select/Enter. Home=Back. To load up your old android sd build go to settings and tell MAGLDR where the build is located. Note: There is an issue with loading sd builds, so most will not run correctly, if at all.
Now its time to install an Android NAND build. I used DFT's stock android build. Download it. Disconnect phone from cpu. Run the #4 option in MAGLDR by using the volume key and send/green. Run the rom update utility on the pc. When its says searching for usb, plug in the phone, and installation should continue. When its done, it should reboot and load into NAND Android.
If anything fails, start from square one. Install a stock shipped winmo rom. This will overwrite nand and HSPL. So your old NAND Android rom will be replaced, as well as your old HSPL. Re-flash the HSPL3 and continue.
Things to take note of: MAGLDR installs after the second nand check. Meaning you can change the first splash screen, not the others. I'm on US TMO HTC HD2 1024, and everything works perfectly. If you have robot voice, activate and deavtivate speaker phone, it should work. If not, reboot phone, and let it sit for about 10 minutes and it should work fine. AFter installation to retuen to MAGLDR hold the power button when turning the device on. Most importantly: READ. People arent answering your questions because they have probably already been asked and answered multiple times.
Also, see MAGLDR.nbh's posts (http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19) about MTTY and task29. It seems to have helped alot of people having more cpu os dependant issues.
Click to expand...
Click to collapse
Make sure that you run all programs on CPU as "administrator".
Sent from my HTC HD2 using XDA App
Installed and running perfectly. Thanks a lot. My phone feels like it was always meant to be an Android phone, a high end one at that.
magldr.nbh said:
NO. He is correct.
you do ruu to do magldr after/via hspl.
then sync with magldr and DAF.EXE
Thanks senior.
Click to expand...
Click to collapse
Sorry Member... but the "TUT" is incorrect... He didn't say to do run magldr... sorry... but if he try to help is correct, but also he need to say step by step...
sorry off topic but when i go to boot from sd android for ps3 jb it boots up but screen does not respond plz help
Hi, my HD2 doesn't boot to MAGLDR menu. I have tried task 29 and installing MAGLDR 1.0/ 1.1. After installing MAGLDR my phone reboots to "O2 Welcome" screen (the first screen i see on my phone after reboot) had stucks there. I have HSPL 2.08 install and can install cooked roms without any issues.
I am on O2 UK.
Many Thanks.
USB init failed Info: .\RSPL\RSPL.cpp (723)
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)
sameog said:
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)
Click to expand...
Click to collapse
Are you running xp? Go to Activesync and uncheck "allow usb connections". Reconnect phone, run daf.exe as administrator.
ViK210 said:
Hi, my HD2 doesn't boot to MAGLDR menu. I have tried task 29 and installing MAGLDR 1.0/ 1.1. After installing MAGLDR my phone reboots to "O2 Welcome" screen (the first screen i see on my phone after reboot) had stucks there. I have HSPL 2.08 install and can install cooked roms without any issues.
I am on O2 UK.
Many Thanks.
Click to expand...
Click to collapse
Its working now. I have updated the radio to 2.15.50.14 and everything is good. Its a must have ROM. Thanks everyone.
caedanne said:
Sorry Member... but the "TUT" is incorrect... He didn't say to do run magldr... sorry... but if he try to help is correct, but also he need to say step by step...
Click to expand...
Click to collapse
If I'm doing it wrong, then do it right yourself. Make a tutorial and put it up. It will phase mine out. I never said it was step by step, I just wanted to post something to help the people who were having problems, if you arent having problems why is my short tutorial giving you such grief?
jpack1983 said:
sorry off topic but when i go to boot from sd android for ps3 jb it boots up but screen does not respond plz help
Click to expand...
Click to collapse
I havent had much luck with booting sd builds, sorry I couldnt be of more assistance.
sameog said:
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)
Click to expand...
Click to collapse
Start everything from begining and try again. Flash stock shipped winmo rom to revert phone, then upgrade to hspl3 then continue through.

Guide to Install wp7 on HD2

I saw a few people asking on how to install WP7 on their HD2 and thought I will try to help out by giving a short guide with links for those that struggle to find all the different information. Please make sure that you read the installation instructions for the ROM you wish to install as this does not replace those...its ONLY meant to help those looking for information. Also read the information in each link posted for each step. Please feel free to add any corrections, installation tips etc into this thread.
CREDITS
I would like to mention that everything you read in this post is just gathering of information from other threads and that the credit is not due to me BUT to those people that put in a lot of effort to make all this possible to us. When you thank people...thank those in the threads listed below as they are the ones deserving the credit. Also thanks to XDA for making all this possible to us the community and for running well organized forums...your efforts are appreciated.
WARNING
· When installing WP7 your SD Card will be formatted during the installation process. Please make sure that you have made a backup of your SD Card prior to installing.
· When installing WP7 your phones warranty will no longer be valid.
· Please know there is a risk of bricking your phone...however the risk is very slim, but its there.
Steps of installation
1) Install HSPL2
2) Install Radio (2.14.40.04)
3) Install MagLDR (Ver 1.12 or Ver 1.13)
4) Install WP7 ROM
5) Install Zune
6) Install WP7 SDK
7) Install XAP's
8) Video
9) Additional Information
10) Trouble Shooting
Step 1 – Install HSPL2
http://forum.xda-developers.com/showthread.php?t=611433
To check your HSPL version hold the volume down button...press the power button (red phone button at bottom left) till phone reboots.
· You need HSPL2.08 or higher
If you have to downgrade your SPL version in order to get to HSPL2.08 have a look here http://forum.xda-developers.com/showthread.php?t=898128 and at the bottom you will see a post explaining a bit more with this link to ROM's http://forum.xda-developers.com/showthread.php?t=623283
Step 2 – Install Radio
http://forum.xda-developers.com/showthread.php?t=611787
Make sure you read up on the radio's and that the radio you select will work on your phone. Example...don't use a USA radio (1024 ROM) for a 512 (ROM).
· Get Radio (I used Leo_RADIO_2.14.50.02)
· Reboot Phone – press volume down button to enter boot loader
· Run CustomRUU (From Radio folder on PC)
· Follow instructions on PC screen
· You will notice on phone and PC that its installing
Step 3 – Install MagLDR
http://forum.xda-developers.com/showthread.php?t=893618
· You need MagLDR 1.12 or higher
· Reboot Phone – press volume down button to enter boot loader
· Run ROMUpdateUtility (From MagLDR folder on PC)
· Follow instructions on PC screen
· You will notice on phone and PC that its installing (It might wait a bit on 96% but don’t worry about that its normal)
· Boot into MagLDR by holding power button down
Step 4 - Install WP7 ROM
I would recommend to install one of the ROM’s that has already unlocked your phone as it will ease your process. Choose a ROM from here: http://forum.xda-developers.com/forumdisplay.php?f=977
You need installed MAGLDR 1.12 or higher (Done in Step 3)
· Enter MAGLDR loader by pressing and holding the "Power button" if you aren’t already in it (End of Step 3).
· Choose point 5 - "USB Flasher" then press Green button
· Run DWI.exe (Vista/ W7 user should do that with administrator rights)
· Done, you have WP7 ROM on your device
Step 5 – Install Zune
http://download.microsoft.com/download/5/B/4/5B41E996-7CC5-400B-802C-69FBB3B492EF/ZunePackage47.exe
Step 6 – Install WP7 SDK
http://forum.xda-developers.com/showthread.php?t=920275
For installing the WP7 SDK on XP Scroll down to Basingwas post…its the 5th one in that thread…it worked for me on XP.
Step 7 – Install XAP’s
http://forum.xda-developers.com/showthread.php?t=860964
and a list of some Xap files here
http://forum.xda-developers.com/showthread.php?t=920845
Video
http://www.youtube.com/watch?v=Nac3Fnf-lY4
Watch this video if you are unsure what to do. Also the video doesn’t cover step 1 above which is needed. (HSPL2.08)
Additional Information
· Not all SD cards work well with WP7 and if you run into weird problem it might be that your SD card is not fully compatible with WP7. Try replacing it and see if it helps. It might be useful to read the following thread:
http://forum.xda-developers.com/showthread.php?t=914780
· Please make sure you read the HD2 Windows Phone 7 Q&A thread by mskip as a lot of valuable information is available in the links he provided.
http://forum.xda-developers.com/forumdisplay.php?f=987
Trouble Shooting
After step 3, my phone is stuck on HTC logo, I cannot go into MALGDR at all
· Make sure that HSPL2.08 is flashed or HSPL3 with 2.08 flashed
· Make sure you have the correct Radio installed by flashing the Radio again.
When Running DWI.exe it says error, USB Failed.
Try running as Administrator and read through http://forum.xda-developers.com/showthread.php?t=914026
I'll allow it seeing as how it helped me out ^>^
Thanks alot OMARZA
CrAzYiaN said:
There are threads about this already, Please don't make anymore.
Click to expand...
Click to collapse
Μ8...dont do that, and specialy to people that want to help others....
He did not ask a 1000times asked question..he just wrote a HowTo...
Another guide its not a bad post... its just a guide...
Please respect the time he spend on making this...
@omarza Thanks a lot m8...
Tribulattifather said:
I'll allow it seeing as how it helped me out ^>^
Click to expand...
Click to collapse
Yes its a good thread, already sent a couple of newies there.
Thanks...I just thought seeing that so many people helped out with information I could give a bit back by trying to help others with some of the information consolidated in one place helping others.
Does radio 2.12.xx etc support 576RAM? Since this radio is somewhat best for battery life and reception in the UK i've heard?
Yes, I have used the 2.12.xx Radio as well and it should work fine.
Also after step 3, my phone is stuck on HTC logo, I cannot go into MALGDR at all :\?
Any help?
Try pulling out our USB cable and see if it gets past it. If not try reflashing Magldr...but USB cable still plugged in might stop you at the HTC screen while booting the phone...happened with me once. Let me know...
Still not working :\, I reflashed MAGLDR but it still stuck on HTC logo with white background. I tried removing usb etc as well. !!
Which Magldr did you use...and maybe try another radio. I used the 2.15 radio on installaton and after that flashed the 2.12 and then 2.14. Maybe see what happens if you use the 2.15 radio and flash magldr again after that.
Quick question...did you boot into Magldr by holding the power button down and keeping it in when powering up? Meaning...does that part work to get you into Magldr...
I could't get into MAGDLR at all. After it finishes flashing it gets stuck on HTC Logo. I took battery out waited 30 seconds, then tried going into MAGLDR but it goes straight into HTC Logo.
So far i've reflashed 2.15.xx, then flashed ROMUltility.exe etc and its still stuck on HTC Logo? Have I bricked my phone :O???
I used MAGLDR 1.13, the weird thing is that when I flash, it goes straight to 100% really quick, instead of getting stuck at 96% that you mentioned.
Please help me out xP
EDIT: Problem solved, I installed HSPL2 and flashed a 1.42. I needed to install HSPL3 and flash 2.08. My bad haha! Its all good now, downloading WP7 ROMs now ! mwhahahah
Great...glad you got it solved...was about to ask about HSPL
Finish window phone 7 on my htc hd2 !
Where do I activate my phone?
Might be...but before you call again...which ROM did you load?
omarza said:
Might be...but before you call again...which ROM did you load?
Click to expand...
Click to collapse
Twilight ROM?
I have not finished the SDK and Zune yet. I'll report back after !
Im currently downloading. But after reading some instruction, im stuck on the chevron jailbreak, I mean that the Twilight rom says its already have a devolper pre-installed? what should I do ?
colossus_r said:
Μ8...dont do that, and specialy to people that want to help others....
He did not ask a 1000times asked question..he just wrote a HowTo...
Another guide its not a bad post... its just a guide...
Please respect the time he spend on making this...
@omarza Thanks a lot m8...
Click to expand...
Click to collapse
your right, but seening as to their is alot of threads already about this i kinda get tired of seeing so many guides but your right. Credit is due. Nice guide tho.
MrPhilo said:
Finish window phone 7 on my htc hd2 !
Where do I activate my phone?
Click to expand...
Click to collapse
Call microsoft and ask them you need to activate your new windows phone, if they
ask you how you got it tell them you bought it off craigslist or ebay.

[Q] MAGLDR won't load menu

For the life of me, the MAGLDR menu refuses to show (Boot AD NANDE, USB Flasher, etc). The program itself will start up, but not the menu. I've put HSPL2.08 and the 2.15.50.14 radio on the phone. I actually had an Android ROM booted before, but wanted to try a WP7 rom, which acted like it wanted to boot up, but never did. I'm not sure what to do at this point. I've been rebooted this phone for the past 4 hours trying to get it to show the menu, but nothing. Any idea what the problem could be?
just to double check the process, , you need to be holding the power (end) button from during the first splash screen, and dont let go till the menu appears.
Still not giving me anything. I'm not sure what to do from here.
double check your spl, (bootloader, must say 2.08,hspl next to 'spl', , dont assume it, check it.)
since this came from a failed wp7 flash, id be very tempted to either flash a stock rom, or do a task 29, to get it back to blank, then magldr, CWM, rom.
Couple of questions:
1. What is task 29? (sounds like formatting)
2. How do I flash CWM from a fresh Magldr install? I got an Android ROM ready to install through DFT, but would prefer to flash through CWM from now on. Thanks for your help, btw.
Ok this is what you need to do...
1. Download task29 to your computer. Unzip to a folder on your computer.
look here for the task29 zip (I use this one) http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 Enter bootloader screen and run DAF as admin this will run through setup. After setup phone will reboot, this is where you start step #2.
2. Make sure you have a copy of MAGLDR which can be found here...Do the same, extract to a file on your computer.
http://forum.xda-developers.com/showpost.php?p=10197474&postcount=1 Enter bootloader, run ROM update utility as admin. The phone will install magldr1.13. Now on to step three...
3. You will reboot phone into MAGLDR by holding red power button down till you enter into MAGLDR go down to option 5...USB Flasher this is what you want to choose to setup your partition. Some ROM builds have specific partitions that work with their ROMS like the one I use which can be found here.... http://forum.xda-developers.com/showthread.php?t=915159
If you are going to use DFT builds go ahead but CWM is so much easier trust me, but just in case here is a link for some standard partitions for CWM
http://forum.xda-developers.com/showthread.php?t=898913
4. After you have done all this and have a partition setup it is time again to reboot into bootloader...choose option 5 for DFT builds and flash your ROM. Choose option 8 for CWM and install your build zip file.
Why would MAGLDR's menu refuse to pop up even if I hold down the power button? I have to constantly reboot it for half an hour before it decides to pop up, and even then, flashing fails virtually the whole time. This is getting frustrating. I'm an experienced flasher, having played with a Droid 1 and EVO for the past year, yet this phone is giving me problems like I don't know what I'm doing.
Did you try the steps outlined in my last post? You need to run a task 29 and start from scratch. Your MAGLDR download likely has a corrupt file.
akapaul26 said:
Did you try the steps outlined in my last post? You need to run a task 29 and start from scratch. Your MAGLDR download likely has a corrupt file.
Click to expand...
Click to collapse
Task 29 link you provided is freezing at 38%. I've pretty much given up on this phone.
*edit* Started over, and it worked, but didn't reboot the phone properly. One problem after another.
*edit 2* Pulled the battery, went into bootloader, flashed the MAGLDR, finished, but also didn't reboot phone properly. What could be the problem with that?
What do you mean by it did not reboot the phone properly?
Phone didn't reboot to splash, just a black screen. I've given up on this phone. I've tried for the past two days to get it going, and I've deleted all files associated to the phone. I'm glad this isn't my phone.
I usually get this with MAGLDR. Sometimes it just shows the info at the top, others, it goes to a white screen. I usually just soft reset it from the little button inside the battery cover. Or else, boot to HSPL, then Task 29.
I use a program called 'AdvancedLeoRUU'. I think this is it. Not too sure though. Try it out. You run the RomUpdateUtility to run the Task 29 btw.

[Q] HTC HD2 - stuck at HTC logo

Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
If the last step you took was to install magldr, of course your phone won´t boot, since you didn´t flash any build the phone could run on?
Or have i missed something?
Normaly, if you are setting things up to install some android build you have to run a file called daf.exe (only as an example, i´ve been flashing just one particular build with magldr), that daf.exe will partition the nand according to the needs of the build, that particular daf.exe was delivered with.
Now you have to enter "ad recovery" from the magldr menu (power on and keep power button pushed) and from there you would have to install from zip.
Have you been that far taking all the necessary steps? Leaving out the nand partitioning with the daf.exe is a common mistake i have read often about.
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
HTC_Pain said:
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
Click to expand...
Click to collapse
Hi,
I would suggest KEVIN134's TOOLKIT (Don't forget to thank him)
Read the thread carefully and follow his step by step guide for beginners.
Try to install one of his suggested ROMS.You can always change it at a later date.
At least you will have something.
OK thanks. I have now gotten original Telstra ROM back. I hope to start fresh in the morning and follow your link to the letter. I hope it is a good guide for beginners, as so many other seem to claim that and have no plain english steps or screenshots. I truly appreciate your post, cheers.
Tried that app, it cannot find any of the apps it tries to install/use? Maybe I need sleep.
HTC_Pain said:
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
Click to expand...
Click to collapse
You are talking about HSPL4, i would suggest you use HSPL3 (http://forum.xda-developers.com/showpost.php?p=6894936&postcount=2).
You know how to flash back to stock winmo? Hold the volume down button while turning on the phone to enter the boot loader, connect with USB and wait for confirmation on the screen below (serial changes to usb), and then flash the stock Rom.
I never used the toolkits, never needed them so i would propose the following steps for you, to start from scratch (so we can take it step by step together, i think we need to have the same base to be able to make a statement about your phone).
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio.
After that install MAGLDR113 and then, if i were you , i would install coredroid v1.6. (http://hotfile.com/dl/113345298/fb3f69b/HD2_Core_Droid_Desire_HD_V1.6_Release_Version.rar.html)
To do that, enter the magldr menu by keeping the power button pressed while turning on your phone, enter USB Flasher from the menu and after connection has been established, run the DAF.exe which will partition the NAND for you.
After that reboot into cwm, enter the usb mass storage option, copy the zip file on the sd card and from there install from zip.
This procedure has worked every single time for me, maybe it will for you, too?
Cheech1976 said:
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio
Click to expand...
Click to collapse
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
HTC_Pain said:
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
Click to expand...
Click to collapse
Task 29 can be used to flash the radio as well, so these two steps can be taken as one.
All you would have to do is copy the radio in the same directory as the rest (task29) and rename it to RUU_signed.nbh, so this procedure will install the new radio as well.
Take that one from here:
http://forum.xda-developers.com/showthread.php?t=1018427
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
HTC_Pain said:
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
Click to expand...
Click to collapse
All right, have a good nights rest
Sent from my HTC HD2 using XDA Premium App
Thanks for that extra step explained...
I have read the thread, and downloaded the ZIP that was linked that has task 29 and the radio together. About to do it now.
OK that has completed, and it has rebooted, and now shows the white screen with HTC green logo, and stays there. This right?
I think it is.. as I have now flashed MAGLDR 1.13. Am now downloading the rom you suggested
UPDATE: I am done.. your suggested rom is installed and working!!
I am so relieved.
FYI here are the last steps I took.
* Used the Task 29 and radio update instructions from the link.
Once that was done it was a white screen with HTC logo - I then rebooted into HSPL bootloader on HTC device.
* Flashed magldr 1.13 - was very quick.
THESE NEXT STEPS ARE FROM THE QWORD DOC INCLUDED IN THE RAR FILE FROM THE SUGGESTE ROM - great stuff this doco.
1. After downloading HD2 CoreDroid DHD V*.*.rar, extract it to a folder on your PC of your choice.
2. Turn your unplugged HD2 on and boot into the MAGLDR 1.13 menu by holding down the power (right) button after initial vibration.
3. Using volume down move to number 5. USB Flasher
4. Push call button (left) and enter the USB flasher screen. You will see “USB Flasher mode Wait USB…”
5. Plug USB cable into the HD2, you should now see “USB Flasher mode Wait USB… USB
6. Go to the extracted HD2 CoreDroid DHD *.* folder on PC, and execute the DAF.exe. On newer windows buttons, right click and run as administrator.
7. Press next twice, and the installation will begin.
8. When finished press finish.
9. After the installation your HD2 will reboot into MAGLDR 1.13 menu.
10. Using the volume down button move to down to number 8. AD Recovery and press call button (left).
11. Your unplugged HD2 will now boot into the ClockworkMod Recovery menu.
12. IF YOU DID NOT BACKUP YOU SDCARD DATA DO IT BEFORE YOU PROCEED IT WILL BE FORMATED.
13. With volume down button advance to the advanced menu press left button.
14. Advance down to Partition SD Card menu.
15. Select minimum (512m) maximum (1024m). Your choice which one to use. Recommended is the 1024m, then press call button (left).
16. Select the 0m with the call button (left).
17. Wait until the process is finished.
18. Do not reboot! Stay in the ClockworkMod Recovery.
19. When finished “done” will appear in the lower half of the screen.
20. Press right button.
21. Using Volume down button move to “-mounts and storage”
22. Press end button (right).
23. Move down to mount USB storage
24. Press call button (left).
25. A new drive should be mounted to your PC.
26. Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
27. Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
28. Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F.
29. When finished copying and unmounts is selected, press the call button (left).
30. Press the back button
31. Move down to “-install zip from sdcard”, and press call button (left).
32. Move down to “-choose zip from sdcard”, and press call button (left).
33. Select the CoreDroid_V*.*.zip, press left button
34. Wait till it´s finish flashing, you will then see a flashing “CoreDroid”. Flash options will reappear.
35. Push end button (right).
36. Select “Reboot system now”
37. Let HD2 reboot giving it time. Wait at least +/- 10 minutes.
Once the phone has booted, let the syncs take place, wait for about 20 minutes, then reboot.
Totally worked for me. i thought I had bricked, I though no roms would hold.... this was done in an hour!
Cheech, you are the man thanks so much.
HTC_Pain said:
UPDATE: I am done.. your suggested rom is installed and working!!
Click to expand...
Click to collapse
Very cool Congratulations
Cheech1976 said:
Very cool Congratulations
Click to expand...
Click to collapse
Cheech your help was awesome, it has been your posts that meant I have had a phone for the past week.
Now not wanting to sound ungrateful, but I have to report that ROM you suggested runs really bad on my HD2. Very laggy, even to unlock the screen will hang 2 time out of 3. Oh well, I am starting to learn the same rom on the same hardware can act very differently.. sad face.
If I had to state the function I HAVE to have in my ROM it would be obviously good phone and text ability, music player with resume and bluetooth, a browser, email client, and something to play videos.
Is there a very lightweight ROM that will give me the above functions but maybe run a little better on my HTC HD2 (and are as easy to install as the one I have already tried)? Thanks heaps for any tips.
I jumped in, and using your great direction from before have a new rom on my HD2...
NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update
Wow, so much faster and snappier. Love the way Google resynced my apps and some settings!!
Gonna play with this for another few days.
EDIT: seems there is always something.. this ROM not finding my Wireless network. Finds all the ones around me but just wont find mine - even with apps to manage it. My kingdom for a lean ROM for my HD2!!!
Edit 2: Turns out Android 2.3 sets the WiFi channels to end at 11.
Our wireless was higher than that.
Advanced settings and increasing the WIFI channels to the full 14, saw my network straight away.
Took quite a bit of Googling to figure that one out.
Please delete.
logo problem
LaneyEFC said:
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
Click to expand...
Click to collapse
dude help me my htc stuck on htc logo and do not boot

[Q] Trying to upgrade to window mobile 7

Here is my story. I have a HTC HD2 and I wanted to upgrade it to Windows mobile 7. I tried last week when I had a bit of time but failed. I follow a web site that gave very clear instructions and links to the necessary software. There were 4 steps with 4 different downloads and I did them in the order they were listed. 1st I downloaded and installed Hard SPL with no problem. Next I downloaded and installed Radio which supports 576 MB RAM with no problem. Next I downloaded and installed MAGLDR 1.3 with no problem. Now came the problem. There was no place to find the windows mobile 7 OS download. I look everywhere and finally gave up. In frustration I tried to load a version of android which didn't work and left the phone inoperable. That was last week.
Starting today I found a bit of software (RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship) and I ran this and it put my phone back to windows 6.5. Yahoo! After this I think I've managed to find a copy of Windows7 mango and download it to my laptop. So I was off again. I downloaded a copy of HSPL4 and upgraded the HD2 to SPL-2.08.0000. Next I downloaded Radio_Leo_2.15.50.14 but when I put the hd2 into booter mode (the multi coloured screen) and connect the usb cable and ran the software I couldn't get it to load. The screen goes from Serial to usb, the software runs, the screen of the HD2 changes to the loading bar but it just stays on Zero percent. I eventually get a error result and I disconnect the usb cable and that's as far as I get. Can any one help me. I'd love to get windows 7 up and running on this old handset but I have to say I losing patience. Thanks for any help you can give.
Duncan
Hello,
First off sounds like you were on the right track.
Spl ... Make sure your spl says Hspl 2.08 without the H at the beginning you will get nowhere fast!
Ok so you have your Hspl, next install magldr (through the tricolor screen) check? Good!
Now after magldr is installed reboot phone and hold down the power/endcall button until you get the magldr menu to come up (usually no more than 10 seconds at most). Now using the volume buttons scroll down to USB flasher (option 5 if mind serves correct). It will say USB ... Usb connect. After that then you will run the DAF.exe to install and all will be done in anywhere from 5-15 minutes.
I think ... THINK from the way I read you were trying to run the DAF.exe from the tricolor and there in lies your problem (if I'm correct)
Hope this helps cheers.
Before setting to flash mode ...scroll down to "services" and select (left hand button on HD2). Then scroll down to "clear SD MBR" press left hand button to select then then press again to confirm.
Do the same for "uselast24nand"
Now back at the main MAGLDR select 5.USB flasher
this is what i did & it ran smoothly
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14
- MagLDR
- MagLDR Repartition 300/ 45
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.
getting nowhere fast
1st off I want to thank everyone for their input. I'm a little new at this so I don't really know what I'm doing. There was 3 replies to my post. The 2nd two made almost no sense to me so if everyone doesn't mind I'll concentrate on the 1st post. But even there I wont get very far but at least there is a start there. As I said in my post I loaded HSPL4 and that part seemed to go alright. But it was when I tried to load the Radio thing and Magldr is where things went arye. As I said "Next I downloaded Radio_Leo_2.15.50.14 but when I put the hd2 into booter mode (the multi coloured screen) and connect the usb cable and ran the software I couldn't get it to load. The screen goes from Serial to usb, the software runs, the screen of the HD2 changes to the loading bar but it just stays on Zero percent" I CANT LOAD RADIO 2.15 OR MADLDR! But you say if I haven't got the H before SPL then I wont get very far.....well I don't have an H before the SPL. And why don't I? If I loaded HSPL4 via the booter screen (multi coloured screen) why have I got SPL-2.08.0000 on my phone and not HSPL-2.08.0000? And more importantly, how do I get it?
I have now spent two full days trying to load windows mobile 7 on this phone and all I've done is go backwards! I'm the 1st to admit that I'm not very conversant with the ins and outs of these sorts of thing but I am a reasonably intelligent person, reasonably intelligent and very frustrated.
hi is it English.The Windows Phone7
still trying
Somehow or other, I managed (don't ask) to load the radio and magldr. I found a copy of DFT leo 70. I went through all the steps only to be told the Leo70 wouldn't load (Something about the bootloader). I have run that RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship and put the phone back to window 6.5. At least I can still use it. I'm will to have one more try if someone is willing to help. As of now, when I put it in Bootloader mode (the multi coloured screen) the screen says
PB81100 HX-BC
SPL-2.08.000 HSPL 8G XE
0x05
Cotu11ahspl 0x30
Does that sound like a good place to start from? If so, I'd love to know where I'm going wrong from there. Any ideas? Thanks
Perfect!
that's what you need to get started!
Now get HD2 Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
& try the steps i posted earlier
Hello mengfei.
Thanks for your help. Now I'm going to ask you a question which is either going to tell you how stupid I am or tell you how badly arranged this this forum is. Where exactly is "The HTC toolkit" available for download on the page you gave me the link for? I have gone up and done that page and there is all kinds of info on cLK, magldr and partitions and all sorts of stuff that makes no sense to me (and frankly scares me) but nowhere can I find a link to download a "toolkit". So now I'm asking you questions about where to find the software instead of questions about how to load it! I don't know how anyone finds time to do any of this stuff. Here it is 4 or 5 days later and I'm not one inch closer to making any changes to this phone. From what I had look at, this all seemed like a straight forward bit of work. Hardly! I know this isn't your fault.....but I don't feel it's mine either. I look forward to hearing from you. Thanks again.
http://forum.xda-developers.com/showpost.php?p=19931919&postcount=501
Thanks Jonas for the link. I now have the toolkit downloaded on my laptop. Progress!
Now for the rest of the stuff. I've gone back to mengfe post and of course there's a few things that need clarification.
Your list starts with HSPL which we know I have now achieved.
Next is Task 29.....what is this?
Then it's load Radio_15.42.50.11U_2.15.50.14 which I'm confident I can do.
Then it's load MagLDR which I'm confident I can do.
Next is MagLDR Repartition 300/ 45. No idea what this is or how to achieve it. Help please. Thanks
Then it's
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
Which I, kind of, understand except where does the "toolkit" come into it?
Thanks again for everyone's help and I look forward the next postings. I'll be honest with everyone, I don't believe for a moment that I'll ever get anything but WM6.5 on this phone (in fact that's probably the best case scenario....if I don't brick this phone completely I'll be total surprise) but if nothing, I am tenacious. BRING IT ON!
Alright
Hspl 2.08 - check!
MagLDR - check!
. NO NEED TO TASK 29 (Because it is recommended to come from winmo 6.x anyway)
Since you came from winmo with radio 2.15.bla bla no need to reflash this!
- Magldr Menu (holding power when booting)
- Service
. - Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP7 DAF.exe
BE PATIENT!
after first boot setup (just skip it) you will need to reset the phone (like you would restore any phone if someone gave it to you and you wanted to clear their preference, contacts, etc)
There are 2 ways
1 the easiest - settings
. about phone
. more information
. reset
2 hold both volume up/down together when booting (all the way through go go go) next, (grey screen blue writing) then press volume down, phone reboots
Set up live service ls for market, customize, and enjoy =D
What OS are you using ??
If WIN 7 then remember when running DAF or DWI exe's to right click and select "run as administrator"
Just double clicking it doesn't work
Thanks again everyone for your help. BUT....I have to admit to more then a bit of frustration. Why am I ask to download something call a "toolkit" and the nothing is mentioned about loading it on the phone? I'm going to follow what rubledub has posted and see how I get on but I'm not feeling very confident. Here we go...wish me luck.
On another issue. What is the normal way to get back to the posts one has posted here?
"run as administrator" That was the difference! I now have WM7 working on my HD2. YAHOO! Thanks everyone.
Hey again =D
1 the toolkit contains an all in one place to flash (task29 - pretty much reformat/wipe NAND, flash mag/clk loaders, partition CWM - recovery for android) but since you went about getting all this done separately there is no need for it. We were just pointing you in the direction of one single place to come by these files so as to make this a little more easier.
2 to get to any post you started yourself, anything you have commented on, or even posts users have thanked you on - log into XDA, then go back to the top of the page and right under the search box where it says "find your device" you will see you user name in yellow, click that and then you will see your public profile that will list you with the options I mentioned at the beginning of 2 here.
Sorry not to mention running as admin in windows 7 (kind of thought that would go without saying but then again you can't take much for granted when helping someone with anything unfamiliar ... And I use XP =)
CONGRATS MATE!!! I think you know the ones who will have no problems should you ever need to pm with questions or concerns.

Categories

Resources