Hi fellas, long time no see!
So, first of all, yes, I've used the search, but what I've found is threads about wet phones, mine I believe is already dry.
Situation: I'm in the club, glass of absolut and redbull in my hand, phone in my jeans pocket, extra glass of absolut w/redbull on the bar next to me. Fat drunk aproaches the bar and tips my glass with his elbow, all my drink spilled over my clothes. After a brief discussion I realized the guy was too drunk and was a worthless douche so I let it go. I reach for my phone and realize my pocket is soaked wet, when I take it out, phone is out, red light dim. So I turn it off, take it apart and forget about it til the next day. Next day, it began to turn on, but shut itslef off after a few secs, so I take it apart again (that is back cover, battery, SIM and sd, I dont have the screwdrivers to go further), cleaned what I could with alcohol, let it vent in front of a fan for a few hours, then in a bowl of rice for 2 days, no good.
So I got an extra phone and let it sit for more than a month. The other day I decided to give it another try and voila! it worked, had to be dry by now! used it for a day, left it charging, when I came back, it was off again, unresponsive. I have an extra battery, so I got one of those universal battery chargers, because I though the problem could be the phone not charging the battery. It was (even when the light turns on red and it says charging and all). So, first weird thing, light turns on red, screen says charging, but USB wont wont actually charge the battery if it is somewhere below.. 70% maybe, it does charge if it is lets say about 80% or above.
I used it like this for a week or so, and now, when I turn it on, after the bootscreen and the initial loop, the phone now powers itself off (with the text "turning off" -or whatever it says- and vibrating and all), even with the battery full. Tried with both batteries full, plugged in the usb (the light is green when full, and will even charge), erased battery stats (recovery works fine) but the damn thing wont load android properly!
Any ideas what might be causing this? it should be dry by now (its been like 2 months already and I let it vent and used the rice method), it doesnt smell funny (you know, like burnt, like when sth short circuits).
btw, also tried flashing the ROM again (i always have a couple in the sd just in case) and didn't work neither, does exactly the same.
i know it is a bit long to read but i wanted to give you the most insight i could. i know that it works! it did a couple days ago, but something got screwed with the startup and i dont know what it is!
update: so today i tried again, to my surprise, it showed me the first-use android intro, and i could use it, but wen i was about to finish setting it up, it shut off
time for a new phone!
You need a new Phone.
aaawww cmooon, heh, yeah, i know, but it aint easy to just "change the phone", i mean, i already have, but im using a crappy phone, and i wouldnt buy anything lower than the dream, but these things arent cheap here you know? you might get them for free sometimes with a contract, not around here we dont.
I think the problem is the no-charging issue, because i believe the phone not working now is due to bot batteries being damaged by the universal charger. the contacts are all scratched. i tried like to scratch them more to make them even, and it worked for about 2 minutes.. if i can rule that out and i can fix the chargin issue, all i need is a new battery, but i wont buy another one (i cant just go to a shop because they dont sell them here, i have to order them online and wait like a month for it to arrive) until i know it will work!
Just an update:
So I forgot about the issue once more and let it sit for.. well from the last post till last week (6 weeks give or take a week). After dusting it off, I took the less-damaged battery and tried my best to fix the contacts. Put it back on, plugged it, and after a while, I turned it on. To my surprise, it worked, and now it is charging again. I guess it hadn't fully dried, idk, but it works at least for now (and has been working for over a week now, I think that's better than last time) .
Related
So i have a 8125, it was my first pocket pc phone, i now have a tilt, i let my friend borrow my 8125 because i was never using it, so one day he comes to my house and brings it back he says that it stopped working, it was charging and when he woke up it wouldn't turn on, i was like wtf, inside i was thinking he screwed it up, but i read on these forums that happens sometimes, so i tried the 9v battery thing, no go, every time i hooked up the phone to the charger without the battery a red light would flash, but when i put the battery in it wouldn't do anything, so i tried a second battery to see what happens, nothing whatsoever, so i stopped trying anything for like 2 weeks, then i was like screw it, ill open it and take the mobo and lightly slam it on the desk, guess what, it fixed it, and its still working like new. i slammed it on the metal shielding, and it works perfectly fine. just thought I'd share maybe it will work for some people getting red led's.
I left my phone outside before a rainstorm. It didn't get get direct rainfall on it but got the spray of the water hitting the side of the wall. When I remembered it 15 minutes later it was covered in water drops but not soaked.
Everything seemed to work fine at first but then the touchscreen kept thinking it was touched at random places.
I turned it off, removed the battery, and started to dry it off with a kleenex and a condensed air can to blow the water out of the slider. When I turned it back on, the backlight flickered for about a minute and then went black (the LCD picture was still there but very dark)
Now when I turn it on the backlight is on for a second but then goes off. If I hit the OK, Talk, or other buttons they work 1 out of 10 times. The touchscreen still registers hits by itself.
Any suggestions on what I should do to dry it out? Do I need to take apart the screen?
I'd hate to throw it away...any help will be much appreciated!
Hum ill try to say this in english. This solution worked for some friends of mine when their phones got wet. disassemble all the tytn parts, take pff the battery, sim card, memory card, everything u can, take it out. Then with a hairdryer point it to the PDA about an hour. Pay attention not burn it up, only heat it a little so that the water or humidy left in the PDA can evaporate. Then leave it on shelf all opened for about a night. Next day join all the parts and try to connect your device. If it doesnt work, u can always take it to warranty. Sry 4 my english I hope u can understand ^^
Zero|Cool said:
Hum ill try to say this in english. This solution worked for some friends of mine when their phones got wet. disassemble all the tytn parts, take pff the battery, sim card, memory card, everything u can, take it out. Then with a hairdryer point it to the PDA about an hour. Pay attention not burn it up, only heat it a little so that the water or humidy left in the PDA can evaporate. Then leave it on shelf all opened for about a night. Next day join all the parts and try to connect your device. If it doesnt work, u can always take it to warranty. Sry 4 my english I hope u can understand ^^
Click to expand...
Click to collapse
Hey don't worry about your English - you speak it better than most others. I'll try this suggestion but I will definitely have to be careful not to burn up anything. Thanks
After the experience tell me how it went
Forget warranty though, there is a water activated sticker inside the hermes to tell the service department if its been soaked. Its white if no water has got in but turns pink if water touches it.
Cheers...
Heres the link to the service manual to be able to dissassemble safely - http://michael-channon.spaces.live.com/PersonalSpace.aspx?_c02_owner=1
You need a small flatbade, a small philips head screwdriver and a no. 6 torque key.
Good luck....
The warranty's already gone so I am willing to take drastic measures to fix this thing. I will let it sit overnight and if that doesn't work, I'll be taking it apart tomorrow. I found a youtube video that shows precisely how to do it. I'll update tomorrow
Would grab the manual as well as it can't hurt to have all bases covered. The manual takes you through step by step.
Cheers...
Thanks for your help, guys!
Seems I was freaking out over nothing. I did like Zero said and took a hair dryer to it (maybe 3mins on low -- 1min on high....did have the patience to do it for an hour) and then let it sit overnight. The phone was completely messed up around 10pm last night even after blow drying but this morning I powered it on and it did just fine. It did reset a couple of settings in advanced config but nothing else was touched. As a matter of fact, I believe the phone runs faster than it did before the incident! I do notice that the CPU memory is idling at 45% instead of 55+%...weird....
So I guess they do make em like they used to
Im glad my solution worked out actually i never tested it on PDA's so i guess that it's quite the same. Hair dryer rullez^^
check your wifi
mcattack86 said:
Thanks for your help, guys!
Seems I was freaking out over nothing. I did like Zero said and took a hair dryer to it (maybe 3mins on low -- 1min on high....did have the patience to do it for an hour) and then let it sit overnight. The phone was completely messed up around 10pm last night even after blow drying but this morning I powered it on and it did just fine. It did reset a couple of settings in advanced config but nothing else was touched. As a matter of fact, I believe the phone runs faster than it did before the incident! I do notice that the CPU memory is idling at 45% instead of 55+%...weird....
So I guess they do make em like they used to
Click to expand...
Click to collapse
I had an MDA before my Wing, dropped in the toilet twice after a couple of days worked fine the second time the wifi went out.
PS My wing doesnt go in the bathroom with me anymore
When you phone gets wet
I don't know if anyone has heard of the Kim Commando Show, she is syndicated over the Radio. Anyways, she's a techie and gives advice on different situations relating to different devices and new stuff coming out. Anyways, she advices when a phone get wets to NOT turn on the phone right away (obviously), take the battery out and put the phone in a bag of rice. The rice will pull out the moisture. The phone has to be in the rice for 24 hours. It works 95% of the time. The trick is to not turn on the phone until you are sure the phone is completly dry inside and out. As you all know, electricity and water will just fry your phone. A new battery is suggested.
water damage SGS2 also..
Got my Galaxy s2 in my pocket when it was raining , i hade about 10% of battery.
Took it up and it was dead, so when i came home i put the charger in it but nothing happend.
I have put it into a bag of rise now and will se if it starts tomorrow. I also have bought a new battery.
if that not works ive also bought a new Charger oem cabel from ebay.
to bad for me did the warrenty went out for about 3 weeks ago.
I hope it will turn on again when i read that people that have droped directly into water and have them fixed by rise or other ways.
If this not works, is there any other ways?
thankfull for any help!
hey all, like most people here, i've been flashing my phones like crazy for the past couple days to trying out all the new roms it's been fine for the last couple days and sundenlly it just stop working this morning. It wouldn't turn on or anything, when i plug the usb in, window gives me an error as it cannot connect to the phone. I try the charger and it wouldn't charge(the charging light on the phone wouldn't turn on). I just got my phone replace last week due to theft. So is my phone bricked? I've flashed my phone alot and each time i wipe everything, could that be the problem? if i take it back to sprint store you think they would send me a new one? thanks.
Take it in and find out...
Just curious... what rom were you running when that happened?
cptkool said:
hey all, like most people here, i've been flashing my phones like crazy for the past couple days to trying out all the new roms it's been fine for the last couple days and sundenlly it just stop working this morning. It wouldn't turn on or anything, when i plug the usb in, window gives me an error as it cannot connect to the phone. I try the charger and it wouldn't charge(the charging light on the phone wouldn't turn on). I just got my phone replace last week due to theft. So is my phone bricked? I've flashed my phone alot and each time i wipe everything, could that be the problem? if i take it back to sprint store you think they would send me a new one? thanks.
Click to expand...
Click to collapse
Pull out the battery, remove charger.
Put the battery back in and dont press anything. Plug it into the wall and see after ~60 seconds you get a charge light.
I just got my phone replaced with the exact problem. Took it to sprint and they ordered me a new one under the HTC warranty, no problem. I didnt say anything about flashing just that it stopped charging and would not turn on anymore.
natelw said:
I just got my phone replaced with the exact problem. Took it to sprint and they ordered me a new one under the HTC warranty, no problem. I didnt say anything about flashing just that it stopped charging and would not turn on anymore.
Click to expand...
Click to collapse
Just remember that if they get the phone to boot after you turn it in and they find out its rooted/ROM'd that they can fine you the entire price of the phone. Not trying to scare you but it has happened to people. However, it does seem there have been quite a few complaints about USB "issues".
dfbonney said:
Just remember that if they get the phone to boot after you turn it in and they find out its rooted/ROM'd that they can fine you the entire price of the phone. Not trying to scare you but it has happened to people. However, it does seem there have been quite a few complaints about USB "issues".
Click to expand...
Click to collapse
I too have had the usb charging issue. Try moving the usb cable around in the phone and see if it contacts. Mine does by lifting up on it. I called Sprint to see what they can do and they said that it is caused by the user. I laughed at them and said some not so nice words then hung up on them. Then took it to a Sprint store and they ordered a new one for me without any questions.
as a side note I am glad they are replaceing it cause now the speaker is blown and the paint is peeling from the power button.
Also, FYI, my kid's hero's charger died on him (the one out of the box). We thought his phone was broken because it would not charge or be recognized by the USB. Then we tried out my charger and, boom, all good.
Worth a shot....
alright guys, thx everyone for the reply, status update: I try everything that was mention here, pull bat and putting it back(several times), moving charging cables, letting the charger sit 60sec, none of it work. I know my phone wasn't out of batteries cuz when i went to sleep it was about 86% left, so i thought my bat blew out on me after a week of usage. so i just left my phone in my pocket and after a while it started getting hot, i was like wtf, and took out the bat immediately. i leave the bat out for about 30min, put that sucker in again, and voila, it power up, everything was back to normal...anyone know wth's going on? of course i'm very happy my phone is working again
Pushed the power button this morning and no response, thought the battery had run right down, so plugged it in and it booted to the dell screen then froze, removed battery and replaced it, booted no problems at all, still 60% battery left
Once, I think it's because the device has flexed or got jolted at some point and the backplate contacts have come apart briefly. The only way to get it to switch on was to remove the battery and refit it.
I've had this too, but not after a jolt or flex - noticed it after waking up on a morning - Streak had been on bedside table with good charge.
I've had this maybe twice since having the device.
edit to add:
The only difference is my device did not freeze on boot.
yep - every time i power it down and leave it for a bit, it will only fire up again if I take the back off, pop the battery out and put it back in.
The LEDs come on, but it goes no further unless I do the above. Annoying but I can live with it for now (not sure what the wear and tear issues could be over the life of the device tho?)
did it on 1.6, still does it on O2 2.1
That's what's i was thinking, that stupid backplate! it may have moved 1mm and caused error
I posted a comment once about supergluing the fu%$er, might try myself.
Yep, sadly had the same problem. The worse thing is it did this the first time I turned it on. Done the same thing again this morning after simply switching it off.
Hopefully it won't be annoying or we will learn how to avoid it - backplate seems to cause the problem but I didn't even drop it or mishandle it in anyway - just merely switched it off and on again...
If the backplate is the problem, I can see it becoming a real issue, mine is definitely a looser fit than it was a month ago.
This just happened to me this morning. I went to bed around 2am with 90% charge and woke up 8am off on totally drained. The phone was lying on the carpeted floor with no movement. Powered back up and on with icons all messed up.
had this couple of times day, not the first by a long shot. its the back plate for sure. it flexes just a tiny bit and thats enough to make it shut down. pretty shoddy design
I really don't see how it could be the cover. Second day in a row I went from full charge to dead when I woke. It was on the floor the whole time and never touched. Then I charged it and the screen would not respond. So I hit power and then it would not come on again until I pulled the battery. Now, I'm just going to try powering down every night. If it's dead I just leave it at home for the day.....such a waste.
Hello guys,
This just happened.
I left my phone charging, and when it hit 100%, I disconnected it from the charger and then I was going to put it in airplane mode, so I could go to bed. When I pushed the status bar down, the phone froze, 5 seconds later the screen went black and it wont turn on now.
When I plug the phone on my PC, there's a sound notification from windows, just like when you plug whatever USB device, but the phone is absolutely dead.
Holding the power button doesn't help. It just got out from warranty last month.... Full stock phone.
Does anyone know how to fix this?
50/50 chance a new battery might fix your problem. But if your not gonna do it yourself might be time to throw in the towel.
Similar event happened with me, phone died abruptly service center people told me that pcb has died and needs to be replaced, will cost more than 300$ for a new pcb. This phone has got really poor quality hardware component can die any time. Never gonna buy huawei built phone in future
Exodusche said:
50/50 chance a new battery might fix your problem. But if your not gonna do it yourself might be time to throw in the towel.
Click to expand...
Click to collapse
I haven't had any problems with the battery whatsoever, it was fine since day one, a little but totally normal wear. The phone charged fine everytime also.
I stopped by in a service shop, they don't mess with nexus devices and they don't know anyone who does (Nexus never came to my country, so it's a rare device to see, iPhones, Galaxies and Moto G are kings here)..
Anyway, I tried everything I could. Hair dryer, downloading build with QFIL, holding the power and volume for more than 20 minutes, leaving the charger on for 24h and everything else I found online and the phone didn't even tried to recover, so I pulled the trigger on a OnePlus 5T. I hope this one lasts me for 5 years, like I was planning with the N6P.