Hey guys, I have an HD2 (of course) and for some wierd reason the usb connection with the HD2 is not being recognized. The phone charges on the wall and PC, but it doesn't show the "USB" under the bootloader screen. Moreover, when I mount the SDCard o Android and connect the cable, it doesn't show the SDCard on my computer. I have tested with two different cables. I have connected 4 other HD2's and they all work.
My question is: Is it safe to install or update Magdlr from the bootloader option by putting the magdlr.nbh file on the SDCard and renaming it to leoimg.nbh?
Bump it up!
Related
I have a tmobile htc hd2. (My goal is to get ultimate droid on here)
I unlocked it today
I flashed hardspl using hardspl4 to 2.08.hspl
I then put MAGLDR 1.13 on the phone
NOW, my phone just boots into MAGLDR. I can't get pass it
I know, I'm terrible, I get it.
What should i do? Help!?
Magldr is waiting for the next step, which is likely to be ..
Choose USB flasher and flash cwm, then back into magldr, option 8 ad recovery, and flash a zip rom from SD card
It is " just sitting there" because there is no rom to load.
Okay thanks for the quick response!
Another thing though...my sd card is not being recognized by my cpu. I have to use the sd card in my phone to connect to my computer, I don't have an adapter.
EDIT: *CWM now flashed* SD card problem still exists
"NAND KERNEL OPEN FAILED"
Need a solution for my SD card!!
any help would be greatly appreciated!
swatguym4 said:
Need a solution for my SD card!!
any help would be greatly appreciated!
Click to expand...
Click to collapse
Use MAGLDR or CWM to get access to your SD card click the guide in my sig for full details on it.
you havent explained what problem you get with the sd card, , , ,
boot into magldr, then 8 - ad recovery - then mounts and storage, mount USB storage, connect usb cable. if nothing happens (dont worry about not seeing anything happen on the phone, it wont) then open wmdc (or activesync on older OS) and click settings, connection settings, and UNTICK allow usb connections and try again. It 'should' show up as a removeable drive in mycomputer.
samsamuel said:
you havent explained what problem you get with the sd card, , , ,
boot into magldr, then 8 - ad recovery - then mounts and storage, mount USB storage, connect usb cable. if nothing happens (dont worry about not seeing anything happen on the phone, it wont) then open wmdc (or activesync on older OS) and click settings, connection settings, and UNTICK allow usb connections and try again. It 'should' show up as a removeable drive in mycomputer.
Click to expand...
Click to collapse
My sd card just isn't showing up? When I plug in my phone and it boots in MAGDLR, I can't access my SD card. Like there's nothing there.
*Your suggestion worked perfectly. Thank you very much!*
"boot into magldr, then 8 - ad recovery - then mounts and storage, mount USB storage, connect usb cable"
Is this a problem? ""NAND KERNEL OPEN FAILED""
No, it failed because there is no rom yet.
Just finished the Ultimate Droid flash!! Works perfectly!! Thanks to all that posted!
FIXED! nevermind!
Hi everyone, I am having a problem about connecting my hd2 to PC/Mac.
Every time, I plug in my hd2 into Mac, it could not recognize it as a usb driver.
When i plug into Windows, it will show as a card reader, but ask me to insert the sd.
I already choose usb debug, choose Disk drive as default connection type, and still dont work. Also, i read the others post with similar problem and they all suggest to format the sd by SDFormetter, but it didn't work on mine.
The only way for me to transfer data to my sd card is using the Clockworkmod recovery. Do you guys have any idea about that and help me out please.
my hd2 is tmous, and using energy rom. and please help me out
Dear all,
I've been using Defy for 6 months, been alright, but for the last 2 wks, I have stopped being able to connect to my Defy's Memory card via USB cable anymore. I think perhaps I did uninstall some moto drivers or something, so I decided to reinstall it, but that wont help.
All it notify me on my Win 7 when I connect my defy is "Android ADB Device connected"
How am I supposed to solve this problem?
Thanks so much in advance,
You shouldn't need any drivers to connect to the memory card. When you plug the cable into the Defy, pull down the notification bar and select the USB Mass Storage option, then tap OK. (Also, go into your settings and make sure USB Debugging is not enabled.) The Defy will act like a USB thumb drive.
thanks a bunch, i forgot to turn it off, never thought bout that before.
i just updated to Wajkiui 1.12.16 today, n it just happened again. Can't connect to my sdcard even thou i turned usb debugging off already.
I tried going to recovery, and mount SD card through recovery menu, but nothing show up in my computer.
My external HDD can connect pretty well w the same usb port ... what on earth might be happening w my fone n pc?
I have same problem with Defy+
I have installed ICS.
In system menu I have "USB Debugging" OFF and if I select "Share SD Card",
USB debugging is still on and I cannot connect to SD card.
as the title suggest. my laptop does see the device as in it gives te connect sound and i can see the device in the devicemanager. but i cant acces the USB storage of my phone, not while in android or Recovery. only in magldr i can acces the usb storage with the masstorage option. i have a code 10 error in the devicemanager. and i have researched it a bit but i cant find a fix for it. i already tried to reinstall the drivers (plug-and-play install and manual driver instal) i cant get it to work.
does anyone have a solution?
kind regards.
what rom are you using.?
I have tried multiple roms Nand and Nativesd. all the same result. i think its either my phone or my laptop. but i dont know hoe to fix it.
first try all the usb ports on your computer...if not try deleting the drivers to find it and reinstall it again....try to see if another computer works fine or it gives you the same results...(also i should mention that for me only the original cable works...other cables works only for charging)
then i should try finding my old data cable. maybe that will fix it. with the cables i now have used my pc brings up that little usb thing icon in de statusbar in the right corner. but doenst see is when i open "my computer" . and in device manager it says error 10(device wont start) for WPH-filesystem
ok another thing...your sd card is fine.? if you insert your sd card to computer through card reader works fine.?
yep, even bought a new one yesterday. works if i put it in de cardreader. but not if the card is in the phone
Hello! I wanted to transfer a 3gb img file with adb push from my pc to my phone because i do not have an sd card. After a few moments , i heard a disconnection sound from my pc , and it said that the usb malfunctioned and i should try connect it again. In adb it said "protocol failure". After connecting it again , it wouldn't get recognized anymore. What should i do? I dont have any os installed right now and no sd card. Is my usb cable or port broken?
CozmoGM said:
Hello! I wanted to transfer a 3gb img file with adb push from my pc to my phone because i do not have an sd card. After a few moments , i heard a disconnection sound from my pc , and it said that the usb malfunctioned and i should try connect it again. In adb it said "protocol failure". After connecting it again , it wouldn't get recognized anymore. What should i do? I dont have any os installed right now and no sd card. Is my usb cable or port broken?
Click to expand...
Click to collapse
nvm fixed