Database Users

Frp7yd on HTC Hero

finally rooted my phone, BUT, it wont read the SD card, nor when i hook it up to my pc i can'y get anything to come up, i'm using Windows 7 x86, plz plz help
Android Version 1.1.1
Baseband 63.18.55.06PH_6.35.15.11
Kernel
2.6.29-ninpo
[email protected] #14
Mod Version
Froyd-1.1.1-Hero
and also launcher pro wont uninstall =[
Build Number
FrpydVillain1.1.1
and also my contacts won't update with their face beeok, except one... please help =[

1. (SD Card) try going into the settings and formatting it then remount it.
2. (Launcher Pro) Launcher Pro won't installed in the normal fashion because its installed the the system folder. You can get rid of it via ADB although Froyd doesn't have any other launcher installed so you will want to install another one before hand. (and if you install a new one you might as well just swap over to it rather than un-installing
Wez.

i tried to remount, and it wont even read it, when i hook it up to my pc nothing happens. it doesn't even read the new hardware or give me the option to just charge... =/

Ideally, i would recommend you update to latest Froyd 1.2.1, but I'm not sure of what the issue here is...
I'd suggest backing everything on SD to your PC via a card reader, then repartitioning it using recovery, and trying that.

ok, i can boot into carebear, what should i do next? a whole new root? and is Froyo the best ROM to use?

the thing is, i cant get into debugging,i can get into the carebear, but idk what to do from there -.-;

I have the same problem !!!!!!!!!!!!!!!!!!!!!!!

When you attach it to your PC do you mount the sd card? If you drag down the notification bar when it is connected and select "usb connected" then choose "Turn on USB storage". This will mount the SD card.

there is no icon no mount i used the widget no luck

asad510 said:
there is no icon no mount i used the widget no luck
Click to expand...
Click to collapse
It isn't an icon to mount it. What widget are you talking about?
You simply drag down the notification bar > press "usb connected" > press "turn on usb storage"
factualpuddle said:
the thing is, i cant get into debugging,i can get into the carebear, but idk what to do from there -.-;
Click to expand...
Click to collapse
You need to:
1. Download the latest version from http://www.villainrom.co.uk/releases/FroydVillain1.2.1/download.php
2. You simply drag down the notification bar > press "usb connected" > press "turn on usb storage" - alternatively plug the sd-card into an sd reader and follow the rest
3. Open the SD Card folder on your computer.
4. Copy the rom from your computer to your SD Card, do NOT change it, extract the files or put it in any folders
5. Unplug your phone and turn it off (put the sd card in now if you used the reader)
6. Turn the phone on by holding down Home and Power till you get to the custom recovery screen.
7. Select Wipe from the menu, then select:
Wipe data/factory Reset
Wipe Dalvik-cache
Wipe SD:ext partition
Press back button
Select Flash Zip from SD Card
Select the file
Click Confirm
N.B. Ignore any "errors", they are normal and usually mean you're not using that feature.
8. Once it is done, select Reboot and you will boot into the OS

in m,y phone it wont even read that there is an SD card -.-; and when i hook it to pc, it still shows none, i KNOW it works, its a braand new PNY 4 Gb...

As I said - hook it up to a sd card reader, place the files on the card and then boot into recovery with the sd card in and you should be able to flash from there.

it boots into carebear mode and doeskin recognize th3e flash name of the update.zip on my flash

nothing happens, it just charges when i hook it up to the pc, no notifications...

ClockworkMod and mounting USB?

Hey all,
So I just ran ClockworkMod (2.5.13) and wiped my Vibrant in preparation for the new Bionix. I have found that on my phone I had to wipe sdcard too or it wouldn't wipe fully. The problem: ClockworkMod won't let me mount USB storage or mount sdext so I can't figure out how to get the new ROM on the phone. Voodoo is also enabled and I can't seem to disable it without a working ROM on the phone.
When I plug the phone into my PC the "H" and "I" drives automatically pop up but are inaccessible. Mounting USB storage in ClockWorkMod appears to do nothing.
Any ideas? Thanks!

ohhhhhhhhh
I had the same problem last night but i thought my PC was acting up. I guess it has to do with CWM, but idk why.
What i did was copy the ROM on my external sd card, then put it on the phone and move them to internal sd card
Hope that help

you can use adb to push file to your phone.

Djapatos said:
I had the same problem last night but i thought my PC was acting up. I guess it has to do with CWM, but idk why.
What i did was copy the ROM on my external sd card, then put it on the phone and move them to internal sd card
Hope that help
Click to expand...
Click to collapse
CWM won't let me mount SDEXT. Is there something special I have to do to get this to work?

You may have to pull the sd card and use an external card reader.
Sent from my SGH-T959 using XDA Premium App

ADB did the trick. I didn't realize it could push to the phone like that. Easy cheesy. Thanks!
And as for external SD card reader - this doesn't do anything to help transfer a file to the phone. Recovery was unable to mount SDEXT. I can't find any documentation on the matter, but I assume this is a Vibrant-related issue?

Hi, I just have the exact problem on my galaxy note. Trouble is that I can't find a way to connect to my phone through ADB. It just isn't listed when I type "adb devices". I would appreciate any help so I could "push" a rom and be done with it.

demircantas said:
Hi, I just have the exact problem on my galaxy note. Trouble is that I can't find a way to connect to my phone through ADB. It just isn't listed when I type "adb devices". I would appreciate any help so I could "push" a rom and be done with it.
Click to expand...
Click to collapse
Check Applications/Development/Enable USB Debugging. If that is on, make sure you have the necessary drivers on the PC.
As for mounting via CWM, that should work if CWM gives the option. Again, check drivers on PC.

USB Mass Storage mode

ok i runing Oxygen and everithing is just fine,but i have one smaal problem: i can't use USB Mass storage mode.
Lets say the phone is turned absolutley off , when i turn it on and try to get in recovery mode the computer detects it and it shows it like CD Drive(empty), ok i tried some of the options of recovery- i mount/unmount, format , fix .. etc. still appear like CD Drive.
Ok i turned on the phone, and then i choose the android option to use the phone like USB flash drive, again it appeared like CD Drive , wich automaticly means only read but not write on memory card, and now every time i have to remove the card from the phone put it in SD card reader and upload on it some music, photos etc ...
Anyone with a solution?

1) First try another sd-card to see if the sd-card has a problem.
2) Either your ROM has a problem or it is your computer. Please try it again with another computer just to make sure that yours is not the cause for this behaviour.
3) If the problem persists try flashing your ROM again, but in recovery mode: Choose Wipe Data /Factory Reset, then go back to main menu. Choose Wipe Cache Partition, then go back to main menu. Go to Advanced and choose Wipe Dalvik Cache, then go back to main menu. This will delete all the data on the phone and make sure the ROM is installed properly.

Oxygen ROM do not allow to use Internal memory in usb mode, but sd card works 100% tested.

the worst thing for me is that, when im in recovery again appear like cd drive, so the phone for the computer from the begining is cd drive.
when i go in device manager it shows that HSUSB driver is not installed properly is it the same for you guys?
it only shows that my device is android usb device, but not mass stotage

THE same problem
stan40 said:
ok i runing Oxygen and everithing is just fine,but i have one smaal problem: i can't use USB Mass storage mode.
Lets say the phone is turned absolutley off , when i turn it on and try to get in recovery mode the computer detects it and it shows it like CD Drive(empty), ok i tried some of the options of recovery- i mount/unmount, format , fix .. etc. still appear like CD Drive.
Ok i turned on the phone, and then i choose the android option to use the phone like USB flash drive, again it appeared like CD Drive , wich automaticly means only read but not write on memory card, and now every time i have to remove the card from the phone put it in SD card reader and upload on it some music, photos etc ...
Anyone with a solution?
Click to expand...
Click to collapse
THE same problem! How can you deal with it?

This thread is old...
Sent from my GT-P1000 using Tapatalk 2

The god dam windows and drivers was the problem. Actualy i have a huawei USB modem for internet, and the drivers which i used for the modem messed with the drivers for the phone. The solution was to remove the USB Modem drivers and then reinstall them again and this time the computer discover the phone like mass storage.

Transfer files from PC or ext SD from recovery?

Transfer files from PC or ext SD from recovery?
by OS is damaged and I can only get to fastboot, android recover, etc
How can I either restore a factory rom with RSD or fastboot or is there a way to access the external SD card from recovery?
I have tried using RSD light to load
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf
but it fails each time
the phone is Unlocked & rooted
I tried fix permissions, still fails

OhYa1337 said:
Transfer files from PC or ext SD from recovery?
by OS is damaged and I can only get to fastboot, android recover, etc
How can I either restore a factory rom with RSD or fastboot or is there a way to access the external SD card from recovery?
I have tried using RSD light to load
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf
but it fails each time
the phone is Unlocked & rooted
I tried fix permissions, still fails
Click to expand...
Click to collapse
I'm not familiar with fastbbot and RSD could lead to more problems if done incorrectly so I would go the external way.
Do you have a card reader/usb for your micro sd card? If so, you can take your external out of the phone and install anything you want then turn off phone and put in your card again and access recovery.

Turn the phone on while holding "power" and "volume down" until white letters show up saying fastboot on the top right corner of the screen. Then release both buttons. It will still say fastboot at this point. Click the volume down button until it cycles to android recovery. Then click power up to enter recovery. Scroll through the menu down to mounts and storage and click the power button to select it. then scroll down again and select mount USB storage. Select it and then connect your phone to your pc and transfer the files you want. This is all assuming you've installed CWM or another 3rd party recovery.

I have CWM 4.0.1.4 installed
The restore continually fails and if I use advanced to try to restore the data folder on its own it says Error while formatting data
External 2gig SD Card placed in phone:
I cant find the external SD card in the list when I try to use it for installing a new ROM
Accessing phone via USB cable & PC:
when I go to mounts & storage / mount USB
it says,
USB Mass Storage Device
Leaving this menu unmount
your SD card from your PC
Unmount
**** Go Back ****
I connect the phone to the PC at this point and it does nothing, no beebs nothing...
I tried 2 different cables
it did when before...

[Q] pc doenst see usb storage in rom or recovery ( code 10 error for WPH)

as the title suggest. my laptop does see the device as in it gives te connect sound and i can see the device in the devicemanager. but i cant acces the USB storage of my phone, not while in android or Recovery. only in magldr i can acces the usb storage with the masstorage option. i have a code 10 error in the devicemanager. and i have researched it a bit but i cant find a fix for it. i already tried to reinstall the drivers (plug-and-play install and manual driver instal) i cant get it to work.
does anyone have a solution?
kind regards.

what rom are you using.?

I have tried multiple roms Nand and Nativesd. all the same result. i think its either my phone or my laptop. but i dont know hoe to fix it.

first try all the usb ports on your computer...if not try deleting the drivers to find it and reinstall it again....try to see if another computer works fine or it gives you the same results...(also i should mention that for me only the original cable works...other cables works only for charging)

then i should try finding my old data cable. maybe that will fix it. with the cables i now have used my pc brings up that little usb thing icon in de statusbar in the right corner. but doenst see is when i open "my computer" . and in device manager it says error 10(device wont start) for WPH-filesystem

ok another thing...your sd card is fine.? if you insert your sd card to computer through card reader works fine.?

yep, even bought a new one yesterday. works if i put it in de cardreader. but not if the card is in the phone