Problem connecting to Defy's Memory card - Defy Q&A, Help & Troubleshooting

Dear all,
I've been using Defy for 6 months, been alright, but for the last 2 wks, I have stopped being able to connect to my Defy's Memory card via USB cable anymore. I think perhaps I did uninstall some moto drivers or something, so I decided to reinstall it, but that wont help.
All it notify me on my Win 7 when I connect my defy is "Android ADB Device connected"
How am I supposed to solve this problem?
Thanks so much in advance,

You shouldn't need any drivers to connect to the memory card. When you plug the cable into the Defy, pull down the notification bar and select the USB Mass Storage option, then tap OK. (Also, go into your settings and make sure USB Debugging is not enabled.) The Defy will act like a USB thumb drive.

thanks a bunch, i forgot to turn it off, never thought bout that before.

i just updated to Wajkiui 1.12.16 today, n it just happened again. Can't connect to my sdcard even thou i turned usb debugging off already.
I tried going to recovery, and mount SD card through recovery menu, but nothing show up in my computer.
My external HDD can connect pretty well w the same usb port ... what on earth might be happening w my fone n pc?

I have same problem with Defy+
I have installed ICS.
In system menu I have "USB Debugging" OFF and if I select "Share SD Card",
USB debugging is still on and I cannot connect to SD card.

Related

Can't Mount SD Card

Hey Everyone,
I apologise if this is in the wrong forum (not sure if it should be in Android Development), and before I start I want to make it clear that I DID use the search function, I searched for "Can't Enable USB Mass Storage" and "No option to mount SD Card" with no relevant results.
Rom: JFv1.51 CRB43-EU
Ok, I was using my phone fine I managed to sync around 12GB worth of music and transfer a few files last night (I flashed the ROM around 20:00 GMT after trying out several hero builds).
This morning I mounted the SD Card to my laptop (OS is Windows 7 RC1) and transferred a few APK's. Suddenly as I was in the market the phone comes up with "Checking SD Card for Errors" and had for some reason unmounted itself from the PC.
Now when I plug in the USB cable all I get is the light to indicate it's charging. There's no option to mount the SD Card. I've tried it on my Laptop, My Vista Desktop AND My Xbox 360 (usually there's a mount option when you connect to that which allows the xbox to see music on the phone).
Strangest thing is the MicroSD Card seems fine, I am able to play my music and see the 2 pictures I have stored on it. Another site suggested using Anycut to make a shortcut to SD CArd and then ticking Enable USB Mass Storage. This doesn't work either, I get a ! in a triangle in the status bar saying USB Mass Storage Enabled but neither my laptop or my desktop will pick it up.
Any Suggestions?
Thanks,
Steve.
Is USB debugging enabled in settings>applications>development?
alritewhadeva said:
Is USB debugging enabled in settings>applications>development?
Click to expand...
Click to collapse
Yep, Should it be?
Yes it should be. Try uninstalling and reinstalling the drivers (USB mass storage devices)
Edit: Double pOst

Cant mount sd card on the computer

I hate to start a "OMG ITS NOT WORKING" Thread. But im just plain stuck.
Im trying to get to my sd card on my computer, to switch to my 4gb and to get the update.zip on it so i can root. But no matter what i do, it wont mount. My computer complains that the "USB Device not recognized" and loads a bogus driver. Ive been trying to get it figured out but nothing so far.
Anyone else have this problem? Any one know how to fix it?
hope this helps
http://forum.xda-developers.com/showthread.php?p=7218057
Saw that thread. No help
Sent from my SGH-T959 using XDA App
Oskiee said:
Saw that thread. No help
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Settings -> Applications -> Development -> check USB debugging
Hope those helps...
iunlock said:
Settings -> Applications -> Development -> check USB debugging
Hope those helps...
Click to expand...
Click to collapse
No help :O( i dont get whats wrong.
what happens when you plug in the usb cord? Are any external drives shown on your computers file/drive viewer (my computer, etc)? If so can you open those drives, if not what does it say?
the way it should work is.
-DL the drivers here - http://forum.xda-developers.com/showthread.php?p=7218057
-install the drivers on your PC
-hookup phone to PC via the provided usb cable
-on the phone drop down the notification bar and MOUNT the SD card.
-open My Computer or other file viewer
-see two external drives one the internal with about 13GB of total space and one the SD card with 2GB of total space
-add remove files from cards
I did all that. When i plug it in, my computer says "the usb device is not recognized" and proceeds to load a bogus driver. Ive installed the debugging driver, nothing. nothing shows up in my computer for the sd card, OR the phones own flash memory.
I have 3 separate android phones, never had this problem before.
try connecting the phone to your pc again. Make sure that on your phone, that youre using the mass-storage option. Next look at the top of your phone, and pull down the header bar. and click on the "usb connected" option or whatever it says, and then choose "mount" when it pops up.
That's how your actually turn on the mass-storage. dont know why its like this, thought it would be automatically done after chosing the mass-storage option.
I am having the same issue. Installed drivers but can't access the drives.
It does automatically set it self for mass storage, but the computer for some reason isnt seeing it. im pretty sure its a driver issue. or the usb port on the phone maybe bad... that would be annoying.

[Q] Mass Storage after lagfix removal?

Quick question as the searches are failing me...
I removed the One Click Lag Fix 2.1+ in preparation for the JI6 OTA update. I have not removed my root access yet as I've been told that the update will simply overwrite it back to a "normal" user status. I still have OCLF installed from the market. I removed the ext2 tools also.
After removing the lag fix I was expecting that I would be able to mount my vibrant via USB like I did before I rooted it originally. Sadly this is not the case.
I've made sure to enable the Mass Storage prompt in the Applications -> USB settings, but according to the syslogs on my mac it's not even seeing the SD cards when I attempt to mount them. (No error, no nothing).
Is there something else I have to do to get usb mass storage working again?
Thanks in advance for any help!
Switch the setting To ask you what to do. plug it in, choose Mass storage. then switch it back to just mass storage.
Thanks for the reply but I need a little more detail.
Switched to "Ask", plugged in, chose "Mass Storage".
You didn't say to attempt to mount the drive at that point, and I did choose Mass Storage, but I cannot switch it back to just mass storage as opposed to "Ask" while the USB cable is still plugged in.
So I'm guessing what you meant was: "Set USB plug to 'Ask', plug in, choose Mass storage, do not mount USB, unplug USB cable, change USB plug to 'Mass Storage', plug USB cable back in, attempt to mount."
Is that correct?
all I had to do was just change it from mass storage to ask and them instantly change out back to mass storage
sahil04 said:
all I had to do was just change it from mass storage to ask and them instantly change out back to mass storage
Click to expand...
Click to collapse
Again, what _exactly_ is meant by this since you cannot change the USB settings from Ask to Mass Storage while the USB cable is still connected?
radioraheem said:
Again, what _exactly_ is meant by this since you cannot change the USB settings from Ask to Mass Storage while the USB cable is still connected?
Click to expand...
Click to collapse
When you plug your phone into the computer via usb, if the message to mount does not come up in the status bar disconnect the usb cable, go to settings, applications, usb settings, change it from mass storage to ask on connection, and then change it back.
After I did that, I plugged the phone into the computer again and it asked me if I wanted to mount or not.
If this does not work, try turning off debugging and doing it over again.
sahil04 said:
When you plug your phone into the computer via usb, if the message to mount does not come up in the status bar disconnect the usb cable, go to settings, applications, usb settings, change it from mass storage to ask on connection, and then change it back.
After I did that, I plugged the phone into the computer again and it asked me if I wanted to mount or not.
If this does not work, try turning off debugging and doing it over again.
Click to expand...
Click to collapse
Ok, this is weird...
I turned USB Debugging on because it was set to off, and now my drives mount correctly.
*shrug* It works now, and that's all that I'm looking for
Thanks for the suggestions everybody!
Err yes. With USB debugging on, it will always work.
To clarify the instructions:
1. Turn on "Ask"
2. Plug into PC
3. Select "Mass storage"
4. At this point, if it shows that you can mount, great.
5. Unplug and switch to Mass storage.
6. when you plug it in, it should always prepare to mount.
kangxi said:
Err yes. With USB debugging on, it will always work.
To clarify the instructions:
1. Turn on "Ask"
2. Plug into PC
3. Select "Mass storage"
4. At this point, if it shows that you can mount, great.
5. Unplug and switch to Mass storage.
6. when you plug it in, it should always prepare to mount.
Click to expand...
Click to collapse
Strange, that is what I tried and it did not work until I turned USB Debugging on.
Yeah, I just did some more testing and confirmed that the only way I can get my drives mounted at the moment is to turn debugging on.
You're on a Mac, right? I've read that Macs require the phone to be in debugging mode.
Kubernetes said:
You're on a Mac, right? I've read that Macs require the phone to be in debugging mode.
Click to expand...
Click to collapse
Hadn't heard that before now but based on this and previous behavior it sounds right to me
Thanks for the heads up!
radioraheem said:
Hadn't heard that before now but based on this and previous behavior it sounds right to me
Thanks for the heads up!
Click to expand...
Click to collapse
Yeah, not sure if it's because of driver support, but I've read this on a couple forums now.
I did not have to switch settings I just selected mass storage again and it worked.

USB Nightmare..

My Galaxy Vibrant is driving me insane with USB problems. I bought mine about 2 weeks ago, and it connected fine to my PC. Then, out of the blue while turning it on it got stuck at the black screen with white touch lights on....after a few attempts to fix this, I returned it for a new Galaxy Vibrant. This new one will not be recognized by my desktop PC at all. It connects fine however to my laptop (same OS). I am trying to connect it as "USB Mass Storage" mode, without Kies installed at all (I've given up on this awful software). I've tried numerous USB Drivers that others have had success with but unfortunately they have not worked for me.
Drivers I've tried...
USB Drivers 1.3.170
USB Drivers 1.3.450
USB Drivers 1.3.800
Any words of wisdom are greatly appreciated.
Best would be to install and update kies so that drivers are the latest, then uninistall kies (or disable it, so you'd be able to update it without having to reinstall again)
Before that though, you might wana clean everything on the PC (ccleaner and glary Utilities might help you on that)
It seems that it was you or your PC problem rather than the phone.
mounting internal sd
Did you make sure to mount your sd when connected in mass storage mode?
slide down notifications bar -> select "usb connected" -> press "mount".
If you have done that and still no luck then I haven't the foggiest.
Try restarting the phone and then connect the USB. This technique worked for me.
Remove all media files with more then 16 letters in hour internal ram or sd card. Known bug in eclair and kiea
Sent from my GT-I9000 using Tapatalk
ickyboo said:
Remove all media files with more then 16 letters in hour internal ram or sd card. Known bug in eclair and kiea
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
What are classified as media files? This happened as soon as I got my phone...I haven't uploaded any music/videos and currently have no pictures.
Thank god for Froyo!
After updating my Firmware from my laptop (which would recognize my phone), I connected to my Desktop AND Kies with no issues

Computer will not allow me to see the phone files or sd card?

When I plug my phone in my computer sees the phone and names a removable drive for it, but when I click it it says please insert? So its not recognizing the phone. Im running the latest moto drivers. I don't know whats going on.
I'm rooted and running CM7 the latest build. Also Ive tried in on 2 different computers both with the moto drivers and the same thing happens.
If your in USB Storage mode you shouldn't have problems. Sounds like it just didnt read it try again. If it fails again, it could be the USB cord or the SD card.
JDunc said:
If your in USB Storage mode you shouldn't have problems. Sounds like it just didnt read it try again. If it fails again, it could be the USB cord or the SD card.
Click to expand...
Click to collapse
Is there a setting I can check to force it into that maybe it got inadvertently changed. Because no matter what I do its not working. Card should be ok too it lets me save things to it from the phone
Do you have USB Debugging enabled?
To check what USB mode you're in, pull down the notifications bar, tap USB connection, and make sure you're in USB Mass Storage mode. To check to see if you are in USB Debugging mode, go to applications, development, and select USB debugging

Categories

Resources