ok so my gf was on stock 2.1 .
and i wanted to put cust ROM on the phone .. i could not get into fastboot or recovery and found that i need 2.1 with fastboot kdz . so i downloaded that installed via kdz updater . and could still not get into it. so after some searching i found a clockwork rom kdz and downloaded installed that and still cant get into fastboot or recovery ..
here is what my phone is saying in about phone after clockwork kdz flash
gt540
2.1-update1
2.2.29 [email protected] #1 tue oct 5 15:18 edt 2010
gt540-v20a-oct-05-2010
i personally dont think either of the kdz's i flashed worked
also she is rooted
can anyone give me a hand please so i can put cust ROM on her phone
Ok first i need to know what KDZ with fastboot you flashed, second did you check that the KDZ show -- FINISHED -- after 5-10 minutes that takes the process to finish?
What are the combo buttons you're pressing for get in fastboot?
The proper way is CAMERA+POWER BUTTON ( Hold camera button for 1 sec then hold power button without put down camera button, so both buttons needs to be pressed)
The phone will boot , you'll see LG LOGO then after that you should see a dark-blue clean screen (no logo, no letters, NOTHING! just a clean screen). If you get in the mode, congratulations, you are in fastboot now!
Hi IM not on PC at the moment. But I downloaded the 2.1 with fastboot from Modaco (I think) and on the kdz it said all things like param 1-128 call ended and a few other things but noting said fail and then it said finish. I did leave it for about 5 mins after it said finish before I exited and unplugged. I also done camera power and it just boots phone normally.
Sent from my HTC Desire using XDA Premium App
ok i put the v20b 2.1 with fastboot back onto the phone with kdz updater , but i caAN STILL NOT GET IT TO BLANK SCREEN JUST FULL REBOOT TO NORMAL
adz63 said:
ok i put the v20b 2.1 with fastboot back onto the phone with kdz updater , but i caAN STILL NOT GET IT TO BLANK SCREEN JUST FULL REBOOT TO NORMAL
Click to expand...
Click to collapse
ok now that you there try with the KDZ modified by Mur4ik so you get data2system method too...
so follow this:
http://forum.xda-developers.com/showpost.php?p=13620585&postcount=1
Advantages: Its the lates stock 2.1 ROM released in March 2011, it has fastboot and support for recovery as well plus it has been modified for get 238MB of space for install apps.
PS: *When it get stuck at --apram 244 - 245 you done is normal (you wont see -- FINISHED --)
* the process will take 5 minutes, not even 10
* the fastboot screen is blue, more like electric blue with white letters wich is very different than the normal fastboot mode we are used to, so dont panic is normal.
stuck on lg sign after update 2 20e
adz63 said:
stuck on lg sign after update 2 20e
Click to expand...
Click to collapse
get in fastboot do not let it load read carefully the thread because you need to wipe data
fastboot -w
ok got into fastboot on device (i think ) it says suspend reset port change etc .
when running fastboot.exe -w it says waiting for device ..
all drivers are installed correct
adz63 said:
ok got into fastboot on device (i think ) it says suspend reset port change etc .
when running fastboot.exe -w it says waiting for device ..
all drivers are installed correct
Click to expand...
Click to collapse
Is the screen blue with white letters?, if so then you are in fastboot.
What O/S do you have xp, windows 7, 32, 64 bits? you need to install the proper drivers for your pc recognize your phone in fastboot mode
Download Drivers for your computer recognize the phone in fastboot mode. Unzip and put the files inside the folder in C:\android-sdk (take a look of the 3th image)
INSTALL WITH YOUR PHONE PLUGGED:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
... then next and it will install the drivers.
FOR MORE INFORMATION ABOUT HOW-TO PROPERLY FLASH ROMS OR ANY OTHER USEFULL INFO PLEASE CLIC ON FAQ | LG GT540 Reference Thread
Veronica
i already had them installed ... i have it fixed now with cm6 2.2.1with fastboot and recovery ..... am going to update it to 2.3 rom now ...
thanks very much for your help
actually saying that i have no mobile network connectivity
adz63 said:
actually saying that i have no mobile network connectivity
Click to expand...
Click to collapse
you need to configure APN with the one of your cellphone provider in Wireles & Network settings >> Access Point Names >> press menu button >> New APN
Veronica
lavero.burgos said:
you need to configure APN with the one of your cellphone provider in Wireles & Network settings >> Access Point Names >> press menu button >> New APN
Veronica
Click to expand...
Click to collapse
thats fixed she now has cm7 2.3.4 and all working normal.... Thanks once again
Sent from my HTC Desire using XDA Premium App
Related
Hey guys,
Bare with me please as I am fairly new-ish to Android but have some experience with Samsungs, HTCs and the beloved LG GT540.....
I appreciate if anyone can help me on my plight.....
My girlfriend was running Cyanogen Mod for the last year or so on her device and decided that she wanted to try out a different ROM on her phone....
I wanted to install the Oxegen ROM....
Originally I was thinking it would be easy and I could put it on through Clockwork Recovery and flash the zip no problem, for some reason when I rebooted to recovery clockwork would not load up on the device.... just blank screen....
Not content with this, bored on a Sunday afternoon I gave it a couple of hours of my time and in the process messed my girlfriends phone up....
What I did was I tried flashing back to stock using the LG KDZ updater, that was fine and the phone rebooted and has since stuck on the Android logo....
According to this thread : http://forum.xda-developers.com/showthread.php?t=1078745&highlight=stuck+on+android+screen I gave all this a go and I can not get the device showing up in Fastboot, I can not enable USB debugging on it either as I can not get into the phone to tick the box....
In my cmd prompt I am seeing this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In my device manager when my device is connected and powered on I am seeing this :
When I am connected and the device is in "download mode" my devices are like this :
I understand the steps provided in the link above and I am fairly confident I could do them if I can get the device "seen" in Fastboot....
I have installed and re-installed all the USB drivers in hope that it may be a driver issue, now I am wondering is it maybe my OS? Win7 64Bit Ultimate?
I can try it on XP netbook if thats all thats causing my issues....
I am kinda lost now and wondering have I bricked it? It will be the first phone I have if thats the case....
Any help would be appreciated, thanks a lot guys....
Mods if this is in the wrong area, please feel free to move my post.....
did u go to fastboot (power+camera pressed when booting up).
well, from my experience, if i flash incorrectly (via fastboot or recovery), it will go bootloops or go to clockwork, or if i flash incorrectly via kdz, i've got stuck in LG logo or got linux kernel panic.
it seems to me u've flash kdz incorrectly. flash kdz with fastboot mode via download (or emergency mode).
try this:
http://forum.xda-developers.com/showpost.php?p=13184840&postcount=42
and make sure u already install all LG drivers (u can Google those).
gud luck. if else fails, put a very sad and stupid face, act as u dont know anything, bring the phone to the LG representative in ur town.
idk for 64 bit version as i use 32 bit. u can try find pdanet driver, there is 64 bit driver there and it install fastboot well in PC.
m1st3r1 said:
did u go to fastboot (power+camera pressed when booting up).
well, from my experience, if i flash incorrectly (via fastboot or recovery), it will go bootloops or go to clockwork, or if i flash incorrectly via kdz, i've got stuck in LG logo or got linux kernel panic.
it seems to me u've flash kdz incorrectly. flash kdz with fastboot mode via download (or emergency mode).
try this:
http://forum.xda-developers.com/showpost.php?p=13184840&postcount=42
and make sure u already install all LG drivers (u can Google those).
gud luck. if else fails, put a very sad and stupid face, act as u dont know anything, bring the phone to the LG representative in ur town.
idk for 64 bit version as i use 32 bit. u can try find pdanet driver, there is 64 bit driver there and it install fastboot well in PC.
Click to expand...
Click to collapse
Fastboot and ADB works on Windows 7 Home Premium 64bit. I installed LG Drivers then Google USB Driver. It worked then. But I know I did struggle to finally get it working.
Thanks a lot for the advice and replies guys....
As I said, I think my problem lies in not being able to tick the USB debugging option on the phone as I can not boot into the phone to do so....
Is there a way to enable USB debugging over ADB?
As I said, I can "see" the phone responding to ADB, just not fastboot!
I am in the process of installing everything and starting fresh on the Xp netbook, if this fails I would say its new phone time for my g/f, Sony X8 is 80 euro on our network so if the worst comes to the worst I will get her a new one....
Much appreciated guys and if anyone has anything to the thread I will be all ears...
Cheers!
Ko_Ka said:
Thanks a lot for the advice and replies guys....
As I said, I think my problem lies in not being able to tick the USB debugging option on the phone as I can not boot into the phone to do so....
Is there a way to enable USB debugging over ADB?
As I said, I can "see" the phone responding to ADB, just not fastboot!
I am in the process of installing everything and starting fresh on the Xp netbook, if this fails I would say its new phone time for my g/f, Sony X8 is 80 euro on our network so if the worst comes to the worst I will get her a new one....
Much appreciated guys and if anyone has anything to the thread I will be all ears...
Cheers!
Click to expand...
Click to collapse
i think u got it wrong.
read here: http://android-dls.com/wiki/index.php?title=Fastboot and here: http://wiki.cyanogenmod.com/wiki/Fastboot
first of all, i need to ask u the question (again), can u boot to fastboot (or bootloader) when u pressed power (the reject/red phone button) and camera button altogether? the fastboot screen in the phone will be like black screen, but with a little amount of backlight (u'll notice the difference) or blue screen with texts if u flash a kdz-modified-fastboot. if u cant go to bootloader/fastboot, then u need to flash a kdz with fastboot.
u can try this: when u type adb devices, type: adb reboot bootloader
though im not sure if ur gf's phone has fastboot/bootloader (might be missing during the kdz flashing that u've done).
when u type adb devices
m1st3r1 - if you ever come to Dublin, I will buy you a beer!
After nearly 3 days of pulling what hair I have left on my head out, my problem was I was mistaking Fastboot for Download mode.....
I was connecting the phone holding the volume down so it came up "download mode" now all I did was hold the camera + red button and off it went with the command from the post above....
I feel like an idiot, but im a happy idiot right now.....
Thanks a lot, means a lot to me.... (and my girlfriend!)
LOL welcome to the hackers club
Ok, Here's a Little Guide I made to Root the Official Sony Ice Cream Sandwich Released. Its Quite Simple. So here I Go
REQUIREMENTS
Ok, You Must have an Unlocked Boot loader to do so.
If you do not understand What Rooting/Unlocking BL is, go here for a nice background and information on Rooting, BL Unlocking Kernels etc.
Kernel
Flash Any 1 of the following Kernels to your preference.
1 - DoomKernel (2.0 GHz)/ DoomKernel (1.6 GHz) & WiFi Modules
2 - Arc Night Kernel
3 - Stock ICS Kernel with CWM
SuperUser Script
Download SuperUser 3.0.7
Fast Boot Drivers
You would need Fastboot Drivers Installed on your system.
If you Need those, DownloadAndroid SDK And After Opening, Download the Platform Tools Under Options.
For Detailed Instructions on This, Go HERE & Follow Steps 8 through 10
PROCEDURE
Please Note
If you Chose DoomKernel, You would need to connect your Device to PC and copy the Modules (.zip file) anywhere on your Memory Card
1) Switch Off Your Device
2) While Pressing the Options Button, Connect the USB Cable (Without Leaving the Button)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Check your LED, A Blue color should be there.
4) If LED does not become Blue, You Havent connected it properly. Disconnect, Switch off your Device again and repeat step 2 & 3
5) Your Windows Should Detect Your Device and install the drivers. automatically (If you Have SDK Tools installed)
6) Copy the Kernel File (Extension .img) to here
C:\Program Files\Android\android-sdk\platforms-tools
Click to expand...
Click to collapse
7) After that, open Command Prompt and go to the same location mentioned above. Replace C with the System Drive where you installed the Android SDK
8) Type the Follwing code
fastboot flash boot boot.img
Click to expand...
Click to collapse
where "boot.img" is the name of the kernel you just copied
9) You should see something like this if successful
10) Reboot Your Device
11) When The Sony/Doom Logo Comes, Immediately Start Pressing the Volume Down/Back Button on your phone
You will now enter the recovery which looks something like this
Navigation Through Recovery
Now The Home Button Will Act as OK and The Back Button Will Act as Back
Volume Keys Up & Down will help you Go Up and Down
12) Go to The Option "Install zip from sdcard" and goto the Superuser .zip file you downloaded.
13) Press Install
14) Repeat Process 12 & 13 if you have DoomKernel For WiFi Modules
15) Goto the Homescreen and Now click on "reboot system now"
16) Now You should Be Running A Rooted ICS Phone!
17) Next from the Market, Download Busy Box
18) Install Busybox
---------------------------------
CONGRATULATIONS
YOU Are Now Running A Rooted Official ICS Firmware
Please Press Thanks!
Credits
vaibhavknockout for the simple guide on Rooting etc
Doomlord for the DoomKernel!
jimbo77 for the Arc Night Kernel!
kes4817 & cobrato for the Stock ICS Kernel with CWM!
To Whoever wrote and compiled the Rooting Zip File
Anyone Who I might have forgot to mention
Click to expand...
Click to collapse
Please Press Thanks!
Any Dead Links, please PM Me!
WARNING
If you brick your device or anything happens, I cannot be held responsible. Although Nothing is gonna happen, Its Tested on both LT18i and LT 15i Devices (Both Arc & Arc S)
Click to expand...
Click to collapse
I unlock (to use other sim) arc last month used setool. Now phone can enter fastboot mode with blue led showing ....phone has official ics (arc s)..last week I tried to flash doomlord kernel in the fone
And its flash n worked I never tried to unlock its boot loader. Is it normal ? Any idea to check boot loader is lock or unlock ?
Regards
Sent from my LT15a using XDA
That's usually not normal But if it worked, Good For you!
Although Its not recommended as it may cause some glitches in the future, or probably the kernel wont function properly.
I'm not sure how to check if your bootloader is unlocked or not..... But you could try going to the call menu and dialing
*#*#7378423#*#*
Then Go to
service info --> configuration
here should be of Rooting Status - Check in that regarding Bootloader.
I'll search and let you know if I find something Concrete regarding this problem
Thanx for answer friend
here is the screen shot of my boot loader status I ll test more things like OTA update to check the boot loader.
Sent from my LT15a using XDA
Your Bootloader is Locked I presume
Because Otherwise, Instead of that, it says the following
While your efforts are appreciated, the simpler way would be to use DooMLoRD's Rooting Toolkit:
http://forum.xda-developers.com/showthread.php?t=1601038
which works for both locked and unlocked bootloaders.
Rasgula if you use setools using the test point method this opens your boot loader.
WHAT EVER YOU DO, DO NOT UPDATE OVER THE AIR OR YOU WILL BRICK YOUR PHONE.
The pics you upped show your boot loader is open.
By using test point/setools you can still update via pcc or seus or flashtools
Sent from my LT18i using XDA App
thanx for answer friend but i did last night over the air update it works fine for me no brick n then i try to install Arconium ICS 2.2 with doomlord kernel it works fine for me.
i search n i find its look like my boot loader is locked ... but why its happened i dont kno but i think its good for me.
regards
You can also try this:
http://wp.me/paRuR-2jI
for me it worked.
Mugur
Try to return to stock from cyanogenmod, install the 4.1.2 baseband and I showed up this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought I could get it back by KZD and appears this:
I need your help to get my phone if you can help me appreciate it all.
Look for a file v10d_downgrade.kdz in the net, you have to flash that. And the flash whatever kdz you want
It wont work with other kdz.
Ps: i see a white screen in the first photo
Sent from my LG-E612g using Tapatalk 2
raul338 said:
Look for a file v10d_downgrade.kdz in the net, you have to flash that. And the flash whatever kdz you want
It wont work with other kdz.
Ps: i see a white screen in the first photo
Sent from my LG-E612g using Tapatalk 2
Click to expand...
Click to collapse
It does not work, the KDZ throws me the same error. Look:
DELETED sorry wrong post
First of all reinstall the drivers on your computer
Then, did you try to remove the battery, plug the phone to your computer (without the battery), then try to start the phone in Emergency Mode?
If you get to the Emergency Mode with the correct drivers installed, you should be able to flash anything from KDZ.
This method was the only way I could get my L7 in Emergency Mode AND recognized by KDZ, so you could be in the same situation as me maybe?
That method never worked for me, did you get a "UpTestEX_mod2_marwin.exe" in the packge that you downloaded? Use that, select emergency and the v10d_downgrade and flash! (follow a tutorial, you need to install small http server before...... like here)
have u tried "vol down" + "power button"
and when buttons light up, press the "menu" button
and do it a couple of times?
Nothing I've read has worked for me, trying to read the information on the device I get this:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
raul338 said:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
Upgrade Start does not work
Click to expand...
Click to collapse
Let pass without touching the screens and it appeared this, the touch screen does not work at this point, I touch it and nothing happens.
At a time when one of the combinations I appeared the cwm recovery, but when I restart the screen turned white and yellow of the previous photos.
raul338 said:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
Upgrade Start does not work
Click to expand...
Click to collapse
venezuelanboy said:
raul338 said:
Upgrade Start does not work
Click to expand...
Click to collapse
Did you set up small http server & configure it? (also with host file)
Sent from my LG-E612g using Tapatalk 2
Click to expand...
Click to collapse
Hey friend. I have already almost lost my phone several Times.
But persistance is the best to resolve your problem.
Firstly ur phone isnt bricked as it turns on!!!
So try this:
1° turn off phone
2° bottom up + down + turn on
3° should apper "emergency mode" [if this didnt work, try And get in this screen"
4°flash KDZ ( MAKE SURE ITS ON EMERGENCY MODE ON KDZ UPDATER ! AND THE MOST
IMPORTANT WHEN YOU FLASH IT WILL POP UP SEVERAL ERROS . DONT DO NOTHING LET IT CONTINUE )
5° Phone will boot loop (resolve it making a HARD RESET (bottom down+ menu+turn on)
6° now it will reset everything. Then u must flash AGAIN KDZ UPDATER (BUT NOW IT WONT SHOW ERROS ON KDZ UPDATER )
Job done
Phone recovered
PM ME IF ANY DOUBT OCCOURS
Sent From ... Lg e400 <-- {[Brasilian Here]}
Enter in DIAG MODE vol up+vol down+ turn on
(Just do it IF -> u have tried my tip ABOVE this one.)
After that , make sure u connect ur phone then, flash in KDZ UPDATE.
NO ERROR . THIS MUST WORK FOR YOU . AND AS I SAID
IF IT DONT RECONIZE YOUR PHONE THEN U MUST HARD RESET IT .
Sent From ... Lg e400 <-- {[Brasilian Here]}
Finally I could fix the problem without using KDZ and now I want to share with the community.
1. Remove the phone battery.
2. Press the button '+', and connect the usb (without battery).
3. Wait until the drivers are installed on the computer.
4. With the program of LG Mobile Support Tool, and with the phone connected press "Upgrade Error recovery" within the program.
5. Let it download the rom, you unzip and install.
Note: All this process without the battery attached to the phone.
That's all
Bootloop on CMWR and phone never close, only without battery!
Hello.
Today i want to upgrade my android, and surprise! When i push "install"and phone is was restarted, is entered in a continuos loop restart directly in CMWR mode. Here, it was impossible to install anything or make any changes, only "restart", and again, the phone is restarting directly in CMWR mode. At first I thought I bricked my phone, because even in emergency mode it could not start
BUT all this is madeit with battery inside!
After reading what was written here, I realized that I have to remove the battery, and surprise, on the second attempt i managed to start in emergency mode! (with usb cable connected to PC! ) :laugh:
Good...
Now, i openet the "LG Mobile Support Tool" (with usb connected to PC), and after LG mobile tool i let to check and install the last version of USB drivers , it was able to communicate with my PC. After that, i installed the latest available version of Android, via LG Mobile Tool and now is working.
BUT i lost the root of the phone. Anyway, it's the phone of my wife, and she's not interested in "walked" through it
Thanks to "andersonlima" , i understand that as long as boots, is not bricked !
Good luck in the future, and most importantly, read well, with calmness, that can occur various ideas, along with what you have in face, may lead to solving your problem! :good:
venezuelanboy said:
Finally I could fix the problem without using KDZ and now I want to share with the community.
1. Remove the phone battery.
2. Press the button '+', and connect the usb (without battery).
3. Wait until the drivers are installed on the computer.
4. With the program of LG Mobile Support Tool, and with the phone connected press "Upgrade Error recovery" within the program.
5. Let it download the rom, you unzip and install.
Note: All this process without the battery attached to the phone.
That's all
Click to expand...
Click to collapse
Omg man, thanks! Worked perfect, but i used kdz, lg software does not worked.
This is my post of what I need help with.
i flash a recovery .img to my lg and then had android bot so flashed stock rom, everthing was fine with phone but wanted stock rom d802f , downloaded that firmware and flashed to phone with lg flashtool r&d, flashed fine and on reboot i eneded up with this.
when phone has booted up it has signal and people can ring me and can access phone certain functions except apps.
Booted up with Lg logo but no sound
main screen cam on then ( ALL AUTO TEST-FTM MODE CAME ON SCREEN ) Can not access main screen can only pull nav bar from top and access by this only. Exit Button on (All AUTO DOES NOT RESPOND)
i have flashed different stock roms and nothing works still get same when booted on each rom.
I have done power off and power+vol- and done fatory hard reset and gives android bot then take about 1 min to boot into phone but staright to (ALL AUTO ) Also tried factory reset in setting and same outcome.
now when i pug phone into the computer which is windows 8 does not pick up connection. device manager has is the lg but no advanced options .
i have no adb or fastboot access to the phone , and it is not rooted according to recovery mode when i put phone into that.
info on About phone
software info
ANDROID VERSION 4.2.2
BASEBAND VERSION M8974A-AAAANAZM-1.0.190036
KERNAL VERSION 3.4.0
BUILD NUMBER JDQ39B
SOFTWARE VERSION D80210B-EUR-XX
STATUS
IMEI CORRECT
IMEI SV IS 00
I am at wits end with this phone , it was purchased threw eglobaldirect , and was ment to be lg g2 d802 4g lte 32GB
on the phone states d802 and was 32gb .
can anybody help me out there to resolve this matter or should i just bin the phone as stressing me out and been at this for weeks now.
all i want is it back working .
I HAVE ATTACHED IMAGES OF THE SCREEN FROM BOOT TO START OF PHONE ON , ALSO RECOVERY .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
try a factory reset, sometimes files are left over that could conflict. thats why usually its needed to do a clean install.
Sent from my LG-D802 using xda app-developers app
bachera said:
try a factory reset, sometimes files are left over that could conflict. thats why usually its needed to do a clean install.
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
Tried that all ready , same result when it has booted up. thanks any other ideas
redo the flash and check again
this time use lg's tool and repair recovery.
mind you everything will be formatted so backup your stuff from internal sd.
Sent from my LG-D802 using xda app-developers app
Have you tried re-downloading the KDZ? it could just be a corrupt download. Download it again on a reliable internet source and flash it again. If you still have theses issues, i would just send it back for a replacement if you can. Something important has been wiped or corrupted maybe.
hold power button and After 4 days with my LG G2 stuck in FTM All Auto Test FTM Mode, i dound the way to get out this f*** **** status !
Touch on normal boot menu, then a popup will show up and ask you to confirm to switch from Factory Test Mode to Normal mode, just select ok, and
huray, it's normal again
Lord Kelly said:
This is my post of what I need help with.
i flash a recovery .img to my lg and then had android bot so flashed stock rom, everthing was fine with phone but wanted stock rom d802f , downloaded that firmware and flashed to phone with lg flashtool r&d, flashed fine and on reboot i eneded up with this.
when phone has booted up it has signal and people can ring me and can access phone certain functions except apps.
Booted up with Lg logo but no sound
main screen cam on then ( ALL AUTO TEST-FTM MODE CAME ON SCREEN ) Can not access main screen can only pull nav bar from top and access by this only. Exit Button on (All AUTO DOES NOT RESPOND)
i have flashed different stock roms and nothing works still get same when booted on each rom.
I have done power off and power+vol- and done fatory hard reset and gives android bot then take about 1 min to boot into phone but staright to (ALL AUTO ) Also tried factory reset in setting and same outcome.
now when i pug phone into the computer which is windows 8 does not pick up connection. device manager has is the lg but no advanced options .
i have no adb or fastboot access to the phone , and it is not rooted according to recovery mode when i put phone into that.
info on About phone
software info
ANDROID VERSION 4.2.2
BASEBAND VERSION M8974A-AAAANAZM-1.0.190036
KERNAL VERSION 3.4.0
BUILD NUMBER JDQ39B
SOFTWARE VERSION D80210B-EUR-XX
STATUS
IMEI CORRECT
IMEI SV IS 00
I am at wits end with this phone , it was purchased threw eglobaldirect , and was ment to be lg g2 d802 4g lte 32GB
on the phone states d802 and was 32gb .
can anybody help me out there to resolve this matter or should i just bin the phone as stressing me out and been at this for weeks now.
all i want is it back working .
I HAVE ATTACHED IMAGES OF THE SCREEN FROM BOOT TO START OF PHONE ON , ALSO RECOVERY .View attachment 2520054
View attachment 2520055
View attachment 2520056
View attachment 2520057
Click to expand...
Click to collapse
I have the same problem with my LG Optimus L70, could you get out of this? Please help me if you know something, and I did everything and nothing works. :crying:
How to get out of AAT test yada yada BS screen....
Steps...
1) Press and hold the power button
2) Now press normal boot
Touch on normal boot +power button, then a popup will show up and ask you to confirm to switch from Factory Test Mode to Normal mode, just select ok,
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
elmy2424 said:
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
Click to expand...
Click to collapse
jump on irc, freenode, lg-g2 channel. Tell them you used the wrong auto-rec and u are able to get into fastboot. They will give you/direct you to partitions for your phone. You will then need to flash these partitions. Probably the correct aboot and laf(downloadmode), and recovery(maybe not). You will then be able to get into download mode, where you can flash a stock rom. Or possibly give you old aboot and directly flash a custom recovery. Not sure. Go and ask.
elmy2424 said:
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
Click to expand...
Click to collapse
Damn please report back if you resolve your issue. I'm sure you'll help anyone else who might themselves in a similar situation
You can install the Stock ROM For KDZ file, the G2 will be restored...
Search in Google/Youtube: Back To Stock ROM LG G2
PS. You can only enter the Download Mode with the G2 connected with PC by USB
he can't enter dld mode.
1. download autorec for your version
2. extract aboot - boot - laf
3.
fastboot flash aboot aboot.img
fastboot flash boot boot.img
fastboot flash laf laf.img
I did the same thing. Recovered by flashing the correct laf.img with fastboot, which repaired download mode. Then use download mode with a .kdz file and the (un)official LG rescue tool.
Sent from my LG-D801 using XDA Free mobile app
did you readed the title of mi post???
NO DOWNLOAD MODE...
@bender_007 @jug6ernaut@ahilliard
really thanks:laugh: ill do it as soon as i get in my house.
i was thinking to flash all the partitions since i didn´t know which one had the DOWNLOAD MODE xD, thanks again
elmy2424 said:
@bender_007 @jug6ernaut@ahilliard
really thanks:laugh: ill do it as soon as i get in my house.
i was thinking to flash all the partitions since i didn´t know which one had the DOWNLOAD MODE xD, thanks again
Click to expand...
Click to collapse
Just the ones I wrote. Don't touch others.
Solved
elmy2424 said:
Solved
Click to expand...
Click to collapse
I'm sorry that I write here but if I do not want to create a new topic. Maybe someone is able to help?
Hello my problems started up in the morning as I came up with a kernel update.
Mistakenly threw versions of the D800 and the phone went into fastboot.
I tried the method with a live CD of Ubuntu but it does not fit me these many partitions so I can not write it these paintings partition.
I tried to unpack the correct kernel to a file boot.img fastboot flash I uploaded by write and quite like to be spoiled because I wrote that there is no certificate or something - so as to completely fell boot.
But after some time did enter into download mode I uploaded versions V220D and went.
Now phone can enter to download mode but charges only to the logo and the LED flashes blue and green.
The computer sees the phone software from LG emergency phone does not play because he writes with is the newest version but see the battery level and what I currently versions.
What else to do to restore phone?
I would be very grateful.
will find some time for you later
bender_007 said:
will find some time for you later
Click to expand...
Click to collapse
thank you very much
sarzyk said:
thank you very much
Click to expand...
Click to collapse
hm..I see you managed to flash the rom ?
so the problem is you didn't wipe.
turn the device OFF
hold power + volume down until you see the LG logo, release the buttons for a moment and then hold volume down + volume up. On the white screen confirm 2-3 times with power button. After the factory reset (the thing you just did) it will boot.
bender_007 said:
hm..I see you managed to flash the rom ?
so the problem is you didn't wipe.
turn the device OFF
hold power + volume down until you see the LG logo, release the buttons for a moment and then hold volume down + volume up. On the white screen confirm 2-3 times with power button. After the factory reset (the thing you just did) it will boot.
Click to expand...
Click to collapse
you are a god.
Cleans all day interencie but nowhere have written about this to keep the volume + and - raze ..
For now operates proof, and write exactly what and how.
We would like to thank my friend.
Please write more as I'll official* Rom from LG is the site can check if a ROOT or another Rom if it was uploaded?
Where can I check whether they were any signs of interference?
Is it only in Download Mode it says?