Hey everyone, I recently got hold of a HP iPAQ 614c from a friend, and was playing with it. I've had it about a week and so far it's been a lot of fun to play with. Downloaded and used the WM6.1 Manila and then WM6.5 Manila (v0.5) from this forum, and all was working super.
Now a day or so ago, I noticed my phone just totally stopped recognising the USB cable connected to it, and I need some advice as to what to do. It's not detecting the USB either in A/C charge mode, or when connected to my laptop, the laptop isn't detecting it as a device at all.
There is nothing wrong with either battery (a normal and a high capacity, both were working and charging fine before).
I've tried replacing, downgrading and re-upgrading the ROMs, and nothing seems to be working. I've also tried twiddling the cable connection to see if I can get it to respond (even temporarily, which would suggest a lose or damaged connection).
Luckily with the high capacity battery, I got about a week to fix it (if it's fixable) so long as I keep the wi-fi disabled.
Now what I want to know from you guys is if you think it's one of the following scenarios:
1. The USB interface on the phone is damaged (either from being knocked or dropped).
2. The cable has become damaged.
3. I've fudged something inside by using the unofficial ROMs.
And what, if anything I can do about it.
Much appreciated any help.
are you using the original charger?
HP614c recognizes the original charger and informs you about charging in other cases you need to turn on USB charging in system
if you have no response from USB it may be a damaged usb interface eg. the connector or charging IC or USB interface IC.
did you try on other PC/USB port or/and other cable
also check in device manager of PC for any suspicious looking USB devices
Related
Hello, I have a G4 wiza200, which had a broken USB port. I bought a replacement female jack and replaced the faulty one. Everything seems to be ok, there appear to be no short circuits and the Wizard will charge when connected either to the charger or cradled. The problem is that it's not discovered from the PC and it only charges when connected. I have no way to flash the rom or unlock the SIM lock.
Anyone any ides what the problem may be or of a possible solution?
Thanks
Edit: I forgot to mention that I don't have the original cable and I'm using the one I got with my N95 but I guess that's probably irrelevant as it is just a USB --> Mini USB cable.
Check if all the connectors are soldered properly ,charging doesn't confirm that it'll establish connectivity also,maybe the connectors for connectivity is not having a proper connection.There are perhaps five connectors,check with volt meter to confirm connection or get the phone in bootloaders (multicolor screen) connect to pc via usb cable and check if small usb appears in the bootloaders,if it appears it'll confirm establishing connectivity and you can flash a rom,but if it doesn't show it means there's a connection problem,either with the mini usb port or the usb cable.
Cheers!
Thanks for the reply. I have managed to SIM unlock it by sending the enableRapi.cab to the phone and installing it and using lokiwiz over bluetooth. I will go get another USB jack tomorrow and replace it again. Hopefully the problem is there and not one of the tiny ICs.
Believe it or not, it was the cable. I used the cable of a GPS device and it worked. The wizard has now officially returned from the dead
Yeah, I believe the nokia mini usb is a four prong, and ours is a five prong.
Glad to see you got it all fixed up
Now on to flashing some roms.......
enjoy
Thanks mate, I already have. Meanwhile I have discovered that G4s have their own RUU. I'm now running TNT's touchflo version of WM6.1, I have flashed the radio and the splash screens.
Hi I'm looking for some good, hopefully free, games for my HD but for some reason my USB lead has given up and I don't know how else to do it or any suitable sites?
My USB worked when I first got it, I synced with my laptop and backed everything up. Now when I plug both in the phone still charges but neither the phone or the laptop seem aware of each other! Any ideas?
Any suggestions of sites for free games that don't require USB downloads? Or what might of happened to my USB?
Finnbob said:
Hi I'm looking for some good, hopefully free, games for my HD but for some reason my USB lead has given up and I don't know how else to do it or any suitable sites?
My USB worked when I first got it, I synced with my laptop and backed everything up. Now when I plug both in the phone still charges but neither the phone or the laptop seem aware of each other! Any ideas?
Any suggestions of sites for free games that don't require USB downloads? Or what might of happened to my USB?
Click to expand...
Click to collapse
Have you checked usb drivers?
Put your phone into bootloader by turning off device, then holding vol down and pressing power on. You should have a tricolour screen. Now connect phone to pc via usb cable. Does bopttom of bootloader screen change from 'Serial' to 'usb'? If not, update usb drivers here
As for games. There is a list of games which work on the HD in the wiki. Try searching Themes, Applications and Software forum. Also, any further queries regarding games should be in Themes, Applications and Software forum
if all else fails use bluetooth to sync and install stuff
Search, find, download, extract.
Place downloaded on sd card (cardreader)
Insert sd card and install apllication
I have had a similar problem with my TD2, when I use the usb cable that came with the phone it charges (from the mains plug), then when connected to the PC it will detect it and sync fine, I got bored of swapping the single cable from the charger to the PC so decided to use a spare usb cable (retractable one I had for the cig lighter for my car), it charges fine (in car or charger or PC), but Windows XP gives an error. If I swap back to the other cable its fine, I dug out an old cable from my XDA Orbit and that is ok as well.
In conclusion, all usb cables are not the same, and my TD2 is more fussy with cables !! Try using a different cable.
Quite Right you are. Had the same problem a while ago. Got sick of this so I cut the not working cable. Guess what...? The bugging cable only had two threads inside. It was a cable for charging only...http://forum.xda-developers.com/images/smilies/biggrin.gif
Hi all,
There is no discussion ,where i have found the solution, so starting a new topic.
Have been struggling with my phone. The problem started when i had android 2.2 on my htc, and i wanted to charge my phone. The problem was, it didnt charge! i used original wall charger and no results, the orange light wasnt on and the phone didnt charge. Then i installed wp7 using magldr and it didnt charge also. Now i downloaded and installed stock rom windows phone 6.5 and tried to charge and it still doesnt work! also no sync on the computer. When i was in magldr and installed wp7 on the device, the usb connection worked, because i used nand rom and it did connect, because i made it through the install.
Can it be a problem of my htc phone, that the charging dock has broken or something?
Have to say, that i did drop the phone that day, but after the drop i was able to connect the phone with macbook pro and it did charge, but then i just unplugged it and since then no charging! was on android then, and didnt do anything.
Please help!
Sounds like you might have a faulty USB cable. Try using a different cable and see if that helps. If it is not a faulty USB cable, youy might have a damaged USB port on your HD2. Does your HD2 work as a mass storage device with your computer?
Hello everyone, this is my first post and it´s about my Defy, which, for some reason, the USB port does not work to access the phone and/or the SD Card.
1: I did a soft and hard reset and the problem persists.
2: The phone does not show up on the device manager under Windows so not even an error message saying "Device not recognized" or something. Also, it won´t show up in Ubuntu.
3. The "Connect your charger" message shows up all the time.
4. No notification in the phone when plugged to the PC .
5. Even though I can´t access the phone from the PC, I still can´t charge it through the USB port.
6. I can connect/access the phone and SD Card using Wi-Fi (Motorola Phone Portal) but not USB. I can see "Plug in USB to launch" in Phone Portal but cannot press the button, only the one referring to Wi-Fi.
PS: This is my second Defy, the first one got the same problem so I got a new one... sadly, the it happened again.
PS2: I wonder if a USB 3.0 port has to do with anything? It´s the only thing that I noticed before the USB stopped working.
Any help or hint is greatly appreciated.
well, i don't think it's an usb3 problem ...
to be sure you could try to connect your phone with an older usb2 port computer ...
is the phone charging on wall charger and usb-cable ???
if not, it really sounds like a hardware failure ... then i would send it to customer service and tell them that there is the same problem again .. maybe the just repaired something and it's faulty again ... be sure, that they are changing the faulty things ...
if your phone is charging on wall charger, it could be that it is an problem with your pc ... try another one ...
DJ_Synergy said:
well, i don't think it's an usb3 problem ...
to be sure you could try to connect your phone with an older usb2 port computer ...
is the phone charging on wall charger and usb-cable ???
if not, it really sounds like a hardware failure ... then i would send it to customer service and tell them that there is the same problem again .. maybe the just repaired something and it's faulty again ... be sure, that they are changing the faulty things ...
if your phone is charging on wall charger, it could be that it is an problem with your pc ... try another one ...
Click to expand...
Click to collapse
1. I mentioned the USB 3.0 port because it was the only common thing just before the usb conection stopped working.
2. The phone charges normally using the wall charger or usb (2.0, 3.0) cable through the PC.
3. It does not matter what PC is connected to or the OS (Ubuntu, Win7)/
Thanks for the response!
It is possible to brick it. Wtih some phone's it seems to be a common error for usb ports to be blown.
Could also be the cable... My cable that came with the defy was already snatched after a few months. My screen started going on and of when I was charging it.
labsin said:
It is possible to brick it. Wtih some phone's it seems to be a common error for usb ports to be blown.
Could also be the cable... My cable that came with the defy was already snatched after a few months. My screen started going on and of when I was charging it.
Click to expand...
Click to collapse
Is there a way to check for faulty hardware-related issues?
just test different cables, computers or even mobiles ... then you will see, what is faulty
DJ_Synergy said:
just test different cables, computers or even mobiles ... then you will see, what is faulty
Click to expand...
Click to collapse
What I meant was some software that check or even some kind of physical device.
Anyway, I know it´s not the cable or PC faulty but the phone itself. But I want to confirm if it´s software or hardware related and if there´s a fix.
Thanks!
Try using USB with logcat open. You might see something in the log that will tell you what's happening
Sent from my MB525 using xda premium
ive replaced the usb port, fully updated the phone, tryed a friends battery, new charging brick and cords , tryed different
outlets and the phone will not fast charge or show up on the computer/any computer.
when i plug it into the computer i get a error message:usb device not recognized or malfunctioned (i shortend it)
much help needed please and thank you
With regards to the fastcharging part, are you also sure you are using an adapter that supports 2Amps at 5V ? This is also the spec of the original adapter that came with the phone (I also found that it works with different 2.1 Amp. adapters generally for tablets)
albanianagi said:
ive replaced the usb port, fully updated the phone, tryed a friends battery, new charging brick and cords , tryed different
outlets and the phone will not fast charge or show up on the computer/any computer.
when i plug it into the computer i get a error message:usb device not recognized or malfunctioned (i shortend it)
much help needed please and thank you
Click to expand...
Click to collapse
I have the same problem. I changed the USB board but the problem was on the motherboard. I test all possibilities soft and we did. I changed USB card, USB cable and nothing. I went to a service and said that it is guilty USB chip on the motherboard. True or not I do not know but the man said he changed and now it works. It cost $ 50. He said it's a motherboard intervention more difficult.