So I have the wireless USB dongle for connecting my 360 controller to my computer, anyone have any idea if this could also be used for connecting a 360 controller on the Xoom wirelessly?
Sent from my Xoom using XDA App
I used a wireless mouse this way with an otg cable, so the potential is there, can't give you a definite answer though
Sent from my ADR6400L using XDA App
I have an otg cable and still can't get this to work. They touted this at Google io so I know it can work.
I was thinking about this with ps3 and 360 controllers earlier. I'm thinking there's a good chance the wireless dongle will work for the 360 controller, but the thing that annoys me is that--other than just putting the xoom flat on the table--there won't really be a good way to prop the xoom up for a good viewing angle with where the ports are.
Edit: if the dongle doesn't work, it's going to have to be the "charge and go" or whatever that plugs into the controller and has a usb connector.
I could be wrong, but in the presentation I dont think they said the wireless 360 controller itself - they said PS3 and 360 Controllers and since they did say the PS3 wouldnt work through bluetooth I assumed the 360 Wireless wouldnt work either but the full USB 360 would.
PensFan66 said:
I could be wrong, but in the presentation I dont think they said the wireless 360 controller itself - they said PS3 and 360 Controllers and since they did say the PS3 wouldnt work through bluetooth I assumed the 360 Wireless wouldnt work either but the full USB 360 would.
Click to expand...
Click to collapse
Well that's dumb. I guess I could find a cheap USB controller. Just tired of spending money. I already have a wii classic controller, just not the actual wii controller. I think I would rather go wireless with the wii controller.
Mandelbrot.Benoit said:
Well that's dumb. I guess I could find a cheap USB controller. Just tired of spending money. I already have a wii classic controller, just not the actual wii controller. I think I would rather go wireless with the wii controller.
Click to expand...
Click to collapse
Yeah, I have the datel wireless classic controller ordered since before the update was announced (should come in tomorrow!).
EDIT: 360 controller charger adapter does NOT transfer data. Whoops!
Let me know how that works for you, may go that route
vidriera said:
Yeah, I have the datel wireless classic controller ordered since before the update was announced (should come in tomorrow!).
If you want to use your 360 controller without buying another one, this is probably the cheapest option:
http://www.amazon.com/Xbox-360-Black-Play-Charge-Kit/dp/B000OYMYZQ/ref=dp_cp_ob_vg_title_1
This basically just makes the 360 controller a usb device while charging it, so I can't see why this wouldn't do the trick.
Click to expand...
Click to collapse
I have this and it has never seem to connect to my computer, I don't think the USB cable transfers data
Sent from my Xoom using Tapatalk
the usb cable does not transfer data it just charges the battery using usb from the Xobx. I have this for my Xbox. I would also like a wiresless control like the PS3 or 360. I use my wiimote now but i dont like the way the buttons are setup.
Yes as others said, the charge cable does NOT make your controller a usb controller, it only uses usb to charge it. I've never played with the dongle and my xoom hasn't arrived yet but I would assume the dongle uses different drivers than the usb controller. You might be able to get it to work by finding those drivers.
fauxreal said:
So I have the wireless USB dongle for connecting my 360 controller to my computer, anyone have any idea if this could also be used for connecting a 360 controller on the Xoom wirelessly?
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
Yes, it works! If you're talking about this dongle, I also have it and can confirm it works. I've been using it this afternoon to play some emulator games with my wireless 360 controller!
It's awesome, because you can connect multiple 360 controllers to the Xoom this way. The problem with that though, is that the Xoom can't seemingly differentiate between input on controller 1 and input on controller 2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
huelsebu said:
Yes, it works! If you're talking about this dongle, I also have it and can confirm it works. I've been using it this afternoon to play some emulator games with my wireless 360 controller!
It's awesome, because you can connect multiple 360 controllers to the Xoom this way. The problem with that though, is that the Xoom can't seemingly differentiate between input on controller 1 and input on controller 2.
Click to expand...
Click to collapse
Does it show up just as another input device on emulators or what? Just have to map the keys? I won't be able to try mine out for another couple days, so I'm just wondering what to expect.
Sent from my Xoom using XDA Premium App
huelsebu said:
Yes, it works! If you're talking about this dongle, I also have it and can confirm it works. I've been using it this afternoon to play some emulator games with my wireless 360 controller!
It's awesome, because you can connect multiple 360 controllers to the Xoom this way. The problem with that though, is that the Xoom can't seemingly differentiate between input on controller 1 and input on controller 2.
Click to expand...
Click to collapse
I beg to differ please explain circumstances that you got it to work. I got wired 360 to work, wii controller but no wireless dongle.
That's exactly what I am talking about. Are you stock or rooted, and is there anything I need to know before trying this?
huelsebu said:
Yes, it works! If you're talking about this dongle, I also have it and can confirm it works. I've been using it this afternoon to play some emulator games with my wireless 360 controller!
It's awesome, because you can connect multiple 360 controllers to the Xoom this way. The problem with that though, is that the Xoom can't seemingly differentiate between input on controller 1 and input on controller 2.
Click to expand...
Click to collapse
Sent from my Xoom using XDA App
vidriera said:
I was thinking about this with ps3 and 360 controllers earlier. I'm thinking there's a good chance the wireless dongle will work for the 360 controller, but the thing that annoys me is that--other than just putting the xoom flat on the table--there won't really be a good way to prop the xoom up for a good viewing angle with where the ports are.
Edit: if the dongle doesn't work, it's going to have to be the "charge and go" or whatever that plugs into the controller and has a usb connector.
Click to expand...
Click to collapse
The Zoogue case props it up just fine and I can still get at the ports.
vidriera said:
I was thinking about this with ps3 and 360 controllers earlier. I'm thinking there's a good chance the wireless dongle will work for the 360 controller, but the thing that annoys me is that--other than just putting the xoom flat on the table--there won't really be a good way to prop the xoom up for a good viewing angle with where the ports are.
Edit: if the dongle doesn't work, it's going to have to be the "charge and go" or whatever that plugs into the controller and has a usb connector.
Click to expand...
Click to collapse
I use the standard portfolio case and just put the Xoom in that upside down. The screen orientates itself to flip and then the ports are on top. Aside the branded logos on the screen being upside down you would never know the difference.
Here ya go!
It can be used to navigate the homescreens and menus, but it doesn't work too well for that. Seems to work well with Gensoid though, haven't tried it with anything else yet.
I was on the latest Tiamat kernel until 3.1 dropped, then followed this guide: http://forum.xda-developers.com/showthread.php?t=1074609
I haven't done anything else special to make this work. It just did! When in Gensoid, I just went Settings>Input Settings>Key Mappings, and mapped out the necessary Genesis controls. The 360 input shows as "unknown" in the settings, but it still seems to work great
Related
guys what gamepad is currently working for your 3.1 acer iconia?, i tried 2 gamepads already but both of them did'nt work
ps3 controller and a generic usb gamepad
no ones using any gamepad here?
Actually this topic have been there before...
What I know is xbox360 pad work, even sony play station dual shock 2 also work
And ps3 pads that use dongles seem to work as well. No luck with official ps3 pads
Sent from my A500 using Tapatalk
Logitech controllers work beautifully also..
USB controllers work, or just wireless?
rushless said:
USB controllers work, or just wireless?
Click to expand...
Click to collapse
both "should" work
Ooooooooohhhhhh man.
i've been using a saitek cyborg gamepad, its got a usb dongle as well as a ps2 dongle on it.... works great with pc, ps2, and ps3... aaaand now my a500 love it
Hey, sorry for not reporting a controller that will work. So far I don't have one that is seen by the Iconia. I've tried a couple different wired generic usb controllers and a wireless Xbox controller with the usb adapter.
I would like to save someone the trouble of buying a usb wireless adapter for a wireless Xbox controller specifically for their A500. I've tried one, and the dongle powers up and appears to be functional, the controller won't sync to it. Works great on the pc and I highly recommend one for that.
Maybe someday, but it doesn't seem to work for now.
JdgM3NT4L said:
I would like to save someone the trouble of buying a usb wireless adapter for a wireless Xbox controller specifically for their A500. I've tried one, and the dongle powers up and appears to be functional, the controller won't sync to it. Works great on the pc and I highly recommend one for that.
Click to expand...
Click to collapse
strange since i just used mine this past weekend for a good hour playing megaman x on snesoid.
it took me a bit to get it to sync, but it did eventually and it does work fine
as a matter of fact, people should check out this thread from the past weekend, various controllers seem to be tested as well.
http://forum.xda-developers.com/showthread.php?t=1138729
i know that my madcatz ps3 sf4 fightpad and 360 wireless controller with dongle does work. my ps3 controllers (sixaxis and ds3) would charge and when plugged in would not power on my ps3 or work with it.
godashram said:
strange since i just used mine this past weekend for a good hour playing megaman x on snesoid.
it took me a bit to get it to sync, but it did eventually and it does work fine
Click to expand...
Click to collapse
Can you link me to the dongle you are using? I have plenty of wireless xbox controllers laying around. Thanks!
NFauteux said:
Can you link me to the dongle you are using? I have plenty of wireless xbox controllers laying around. Thanks!
Click to expand...
Click to collapse
the microsoft branded one that came with it.
http://www.amazon.com/Microsoft-Xbo...5T6A/ref=sr_1_1?ie=UTF8&qid=1309280432&sr=8-1
but the dongle works with ANY microsoft 360 wireless controller, as i use my black one with it.
what you need is this
http://www.amazon.com/Xbox-Wireless...FCT2/ref=sr_1_6?ie=UTF8&qid=1309280432&sr=8-6
or this in black
http://www.amazon.com/Xbox-Wireless...0RBC/ref=sr_1_7?ie=UTF8&qid=1309280432&sr=8-7
godashram said:
strange since i just used mine this past weekend for a good hour playing megaman x on snesoid.
it took me a bit to get it to sync, but it did eventually and it does work fine.
Click to expand...
Click to collapse
That's awesome!
Got any tips? Do I need to goto the settings on the A500 and do something or should it connect without any interaction on the tablet? I've been trying for 15 minutes or so and I don't get anything but rotating lights on the controller.
This is the adapter that I am trying to use. It is the official Xbox branded one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance for taking a look at this for me.
godashram said:
strange since i just used mine this past weekend for a good hour playing megaman x on snesoid.
it took me a bit to get it to sync, but it did eventually and it does work fine
Click to expand...
Click to collapse
out of curiosity, in snesoid and nesoid when i go to set any buttons other than depad i get an <unknown> when i press any buttons.... for whatever reason the dpad works fine, and in another snes emulator my gamepad works fine i can use all the buttons no problem as well in playstation emulators. Did you have any sort of weird issues like this when setting yours up?
Dang. I wish Tiger Arcade scaled correctly with Honeycomb. All Metal Slugs and tons of great fighting games would rock with a controller (duh).
Tiger Arcade scales fine on Froyo tablets but not Honeycomb. Just a tiny window.
Hogmeister said:
out of curiosity, in snesoid and nesoid when i go to set any buttons other than depad i get an <unknown> when i press any buttons.... for whatever reason the dpad works fine, and in another snes emulator my gamepad works fine i can use all the buttons no problem as well in playstation emulators. Did you have any sort of weird issues like this when setting yours up?
Click to expand...
Click to collapse
i got the <unkown> as well, and all was fine
JdgM3NT4L said:
Got any tips? Do I need to goto the settings on the A500 and do something or should it connect without any interaction on the tablet? I've been trying for 15 minutes or so and I don't get anything but rotating lights on the controller.
This is the adapter that I am trying to use. It is the official Xbox branded one.
Click to expand...
Click to collapse
remember to hit the sync button on both, can't remember in what order or how long to hold it ; but i know you're not going to get just the p1 light on.
rushless said:
Dang. I wish Tiger Arcade scaled correctly with Honeycomb. All Metal Slugs and tons of great fighting games would rock with a controller (duh).
Tiger Arcade scales fine on Froyo tablets but not Honeycomb. Just a tiny window.
Click to expand...
Click to collapse
you need the old apk: Devtools and disable "compatibility mode" it solves alot.
godashram said:
the microsoft branded one that came with it.
http://www.amazon.com/Microsoft-Xbo...5T6A/ref=sr_1_1?ie=UTF8&qid=1309280432&sr=8-1
but the dongle works with ANY microsoft 360 wireless controller, as i use my black one with it.
what you need is this
http://www.amazon.com/Xbox-Wireless...FCT2/ref=sr_1_6?ie=UTF8&qid=1309280432&sr=8-6
or this in black
http://www.amazon.com/Xbox-Wireless...0RBC/ref=sr_1_7?ie=UTF8&qid=1309280432&sr=8-7
Click to expand...
Click to collapse
So that dongle you linked on Amazon.com says that it works with up to four controllers. Have you tried using multiple? That would be amazing.
willbur73 said:
So that dongle you linked on Amazon.com says that it works with up to four controllers. Have you tried using multiple? That would be amazing.
Click to expand...
Click to collapse
i have not.... i'm still in mid move (for the past 7 months) and my other controllers are 2500 miles away
I may be stuck with my a500 for a while unless someone starts releasing accessories. when I travel my usual set up is as follows. I hook my hdmi cable from the dedicated port on my tablet to the hdmi on the TV. then hook up my Belkin multi usb port to the dedicated full sized usb port on my tablet. then I plug my external hard drive to to one port and my mouse and keyboard into the other. now I can sit back in bed and control my tablet from the bed, surf the net play games and watch movies. I have searched but have not found any adapters that allow usb and hdmi at the same time. I really want the note but use this combination when on the road. any suggestions?
TIA
flexte said:
I have searched but have not found any adapters that allow usb and hdmi at the same time.
Click to expand...
Click to collapse
Why not use this (other than the price of course)?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/Samsung-EAD-T...id=1349641390&sr=8-1&keywords=allshare+dongle
BarryH_GEG said:
Why not use this (other than the price of course)?
http://www.amazon.com/Samsung-EAD-T...id=1349641390&sr=8-1&keywords=allshare+dongle
Click to expand...
Click to collapse
Thank that should solve the Hdmi out issue. now i guess i just need a usb adapter to connect my hard drive, keyboard and mouse. I can use my belking usb 7 port to add more usb connections. I just hope that the note can handle all of those connections without issues. anyone tried hooking up multiple usb ports? I guess this solution adds another 150 tot eh price of my device. the biggest thing i will miss is easy file sharing with a usb stick. When on business trips or even vacation I can get large files by just plugin in my usb stick. seems technology is making things harder for me.
flexte said:
Thank that should solve the Hdmi out issue. now i guess i just need a usb adapter to connect my hard drive, keyboard and mouse. I can use my belking usb 7 port to add more usb connections. I just hope that the note can handle all of those connections without issues. anyone tried hooking up multiple usb ports? I guess this solution adds another 150 tot eh price of my device. the biggest thing i will miss is easy file sharing with a usb stick. When on business trips or even vacation I can get large files by just plugin in my usb stick. seems technology is making things harder for me.
Click to expand...
Click to collapse
As far as i know, external harddrives need external power to work with the galaxy note, someone correct me if im wrong, think youl find some info here about it, if you've not seen it already
http://forum.xda-developers.com/showthread.php?t=1899348
banderos101 said:
As far as i know, external harddrives need external power to work with the galaxy note, someone correct me if im wrong, think youl find some info here about it, if you've not seen it already
http://forum.xda-developers.com/showthread.php?t=1899348
Click to expand...
Click to collapse
yes they do and the one I hook up to my a500 works just fine. All of my external drives are powered. I just wanted to make sure there were no restrictions with the note.
flexte said:
keyboard
Click to expand...
Click to collapse
$29.99 after $40 off.
http://www.newegg.com/Product/Produ...ords&cm_mmc=KNC-GoogleAdwords-_-pla-_-NA-_-NA
mouse
Click to expand...
Click to collapse
A little pricey ($49.99) but an excellent BT mouse. I have this one.
http://www.jr.com/sony/pe/SON_VGPBMS15U_SL_B/
BarryH_GEG said:
$29.99 after $40 off.
http://www.newegg.com/Product/Produ...ords&cm_mmc=KNC-GoogleAdwords-_-pla-_-NA-_-NA
A little pricey ($49.99) but an excellent BT mouse. I have this one.
http://www.jr.com/sony/pe/SON_VGPBMS15U_SL_B/
Click to expand...
Click to collapse
thank you! to everyone that posted these suggestions. Looks like i will have to spend about another $200 to get the note setup like my A500 but it may bee worth the investment. off to best buy to check it out in the AM.
BarryH_GEG said:
$29.99 after $40 off.
http://www.newegg.com/Product/Produ...ords&cm_mmc=KNC-GoogleAdwords-_-pla-_-NA-_-NA
Click to expand...
Click to collapse
You can also get that same keyboard on Amazon for $25.25 with free shipping.
http://www.amazon.com/gp/product/B004L9MBH6/ref=s9_simh_gw_p147_d0_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0287VD1TN9BETQNMF2PY&pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846
flexte said:
yes they do and the one I hook up to my a500 works just fine. All of my external drives are powered. I just wanted to make sure there were no restrictions with the note.
Click to expand...
Click to collapse
So, you're able to power your external harddrive with the tabs battery and dont have to, like with my adapter, have to connect your harddrive to the mains power? Is that assumption right?
If so, and if its not a bother can you provide info on the adapter you use please mate, im sure others like me would appreciate it i.e. model or product web link
banderos101 said:
So, you're able to power your external harddrive with the tabs battery and dont have to, like with my adapter, have to connect your harddrive to the mains power? Is that assumption right?
If so, and if its not a bother can you provide info on the adapter you use please mate, im sure others like me would appreciate it i.e. model or product web link
Click to expand...
Click to collapse
no its a misunderstanding. Of course the external hard drive has to be hooked up to wall power. I even had a problem hooking my usb stick directly to my tv's usb without choppy video. When ever and where ever i travel there are always enough outlets to plug in my hard drive and tablet. The only thing that I am waiting on is a good solution to hook up my tablet to the tv's hdmi while having an exteranl hard drive mouse and keyboard attached. the above suggestions may work. After reading the reviews on the wifi hdmi adapter it seems video playback may be a concern. most of the business men i know use a usb stick to take files off their work pc if they need to bring them home or take them on a business or vacation trip. cloud storage isn't always viable because sometimes the files are large and internet connection is not always available and sometimes way to slow. having the full sized USB makes the task a whole lot easier. carrying info in a micro usb card for file transport doesn't work well because it is too easily misplaced. Anyway I am just weighing the positives and negatives and the solutions have been very helpful.
flexte said:
no its a misunderstanding. Of course the external hard drive has to be hooked up to wall power. I even had a problem hooking my usb stick directly to my tv's usb without choppy video. When ever and where ever i travel there are always enough outlets to plug in my hard drive and tablet. The only thing that I am waiting on is a good solution to hook up my tablet to the tv's hdmi while having an exteranl hard drive mouse and keyboard attached. the above suggestions may work. After reading the reviews on the wifi hdmi adapter it seems video playback may be a concern. most of the business men i know use a usb stick to take files off their work pc if they need to bring them home or take them on a business or vacation trip. cloud storage isn't always viable because sometimes the files are large and internet connection is not always available and sometimes way to slow. having the full sized USB makes the task a whole lot easier. carrying info in a micro usb card for file transport doesn't work well because it is too easily misplaced. Anyway I am just weighing the positives and negatives and the solutions have been very helpful.
Click to expand...
Click to collapse
Cheers, was getting my hopes up there
As far as connecting to the tv wirelessly, if the tv in the the hotel you frequent are smart tv (wifi) capable, then you can stream your media over wifi using dlna apps on the market like imediashare, theres a few others, but if you want to mirror everything thats on your tab wirelessly, then it looks like the screencast hub is your solution assuming your ok with the price,.
Maybe a usb to hdmi adapter might work in your situation assuming you have enough usb ports for all you devices, and thats assuming a usb to hdmi adapter would even work on our tab
Just use one of the portable wireless HDDs. No more problems iwth connecting it to the Note or any other device as long as it has WiFi.
Szadzik said:
Just use one of the portable wireless HDDs. No more problems iwth connecting it to the Note or any other device as long as it has WiFi.
Click to expand...
Click to collapse
looks like wireless is going to be my only real choice. I wanted to stick with wired because there would be no connectivity issues just plug and play. So wifi from my hdd to my tablet and then wifi from my tablet to my tv. hope that works. and Bluetooth for my mouse and keyboard.
flexte said:
looks like wireless is going to be my only real choice. I wanted to stick with wired because there would be no connectivity issues just plug and play. So wifi from my hdd to my tablet and then wifi from my tablet to my tv. hope that works. and Bluetooth for my mouse and keyboard.
Click to expand...
Click to collapse
In your situation, getting a wifi harddrive with a usb connection, for usb sticks, would solve the usb stick problem, and would be future proof for other devices with wifi, but no usb port, although, im just assuming here, that there is such a thing as a wifi hd with a usb port,. If money is no concern and indeed if there is such a thing as a wifiHD with usb port i mean theres gotta be...... right?), might be worth it, gd luck
I also own a a500 and recently bought note 10.1.
I must tell you the difference in performance and screen colors and contrast is pretty big from one to another.
Even though I must say all those add ons to get what we had from default on a500 is kind of dissappointing.
For hdmi you have two ways...the dongle, which is WiFi based....that is if you go to a cabin for a weekend with no WiFi outside your city....it won't work. Or you have the adapter which unfortunately works only if it is also connected to to AC which in my opinion also limits the portable function or idea of a tablet...I mean it is like doing the same connections you can do with your notebook....
So tough choice there, maybe consider as I....having both.
Same thing here with usb otg adapter.
Acer did sacrifice thickness over having standard usb and mini hdmi ports but it really did the trick.
Kind of mad here with Sammy as you may say....good luck and if you find new ways of having less accessories please let me know!!!
Enviado desde mi GT-N8013 usando XDA Premium HD app
" For hdmi you have two ways...the dongle, which is WiFi based....that is if you go to a cabin for a weekend with no WiFi outside your city....it won't work."
Is'nt the screencast dongle a direct to tv connection?
banderos101 said:
In your situation, getting a wifi harddrive with a usb connection, for usb sticks, would solve the usb stick problem, and would be future proof for other devices with wifi, but no usb port, although, im just assuming here, that there is such a thing as a wifi hd with a usb port,. If money is no concern and indeed if there is such a thing as a wifiHD with usb port i mean theres gotta be...... right?), might be worth it, gd luck
Click to expand...
Click to collapse
No USB-in on WiFi HDD, just a normal HDD, no idea what you are talking about.
Szadzik said:
No USB-in on WiFi HDD, just a normal HDD, no idea what you are talking about.
Click to expand...
Click to collapse
Was thinking out loud mate
If i were gonna get a wifi hdd, id check for ones with additional benefits, i.e. a usb port (host), so if i have anything on a usb stick, i can connect that to the wifi hdd aand transmit it over wifi via wifi hdd........thing is, i have no idea if there is a wifi hdd product out there that has a host usb port, my brief search showed nothing, would be a nice feature though
flexte said:
yes they do and the one I hook up to my a500 works just fine. All of my external drives are powered. I just wanted to make sure there were no restrictions with the note.
Click to expand...
Click to collapse
I've had *terrible* luck trying to connect drives to the Note 10.1... this is probably the single 'failure' the Note has in general.
There are two different problems at work. First, the USB port only sources 100ma. That makes it fine for most keyboards, mice and *some* USB memory sticks (but not all), but forget anything that needs more power. Worse, even devices that ARE self-powered will draw more than 100ma just to drive their USB connection and that trips the Note's 'overcurrent' warning causing it to shut down the USB port.
Weirdly, even if you go through a powered USB hub, you still get this behaviour... that doesn't even make sense.
The bizarre thing is - if you connect in just the right sequence with just the right timing - you sometimes *can* get it to work, so it's not that the Note isn't capable of handling the USB load - Samsung's software is purposefully tripping on devices by enforcing the USB current limit too tightly (well or I have a defective Note or USB dongle - but I've tried several and they all seem to work this way).
The other problem is that there doesn't seem to be integrated support for NTFS (or exFAT, from what I can see), so you're stuck with FAT32. I've switched all my USB keys over to NTFS as I work with large files regularly. It also doesn't seem to support things like USB ethernet dongles.
Ironically, this is one place where the Asus Prime really shines - you can hang almost anything on the USB port and it'll work fine and the dock, because it has a big battery built in, seems to handle heftier devices quite well. It even supports NTFS out of the box.
---------- Post added at 01:32 PM ---------- Previous post was at 01:26 PM ----------
mantrajt said:
For hdmi you have two ways...the dongle, which is WiFi based....that is if you go to a cabin for a weekend with no WiFi outside your city....it won't work. Or you have the adapter which unfortunately works only if it is also connected to to AC which in my opinion also limits the portable function or idea of a tablet...I mean it is like doing the same connections you can do with your notebook....
Click to expand...
Click to collapse
I think you're confusing WiFi and WAN. If the dongle is WiFi based, you can bring a pocket WiFi access point and connect all your devices to it. Where you are isn't really relevent since it's not connected to the internet through cable, DSL or cellco. These pocket access points are *tiny*.
Here's an example of one:
http://www.dlink.com/ca/en/home-sol...350-wireless-n-pocket-router-and-access-point
Looks like I will have to stick with the a500 nd get the small note 2 for stylus use. The a 7 inch note would be perfect.
Good night. I started this post to share with you all hardware usb devices that i have tested and worked without problem into OUYA.
First, i get an usb host with 5 usb ports , because ouya just have one standard usb port,
Usb .host worked without problem, and connected to it:
Keyboard and wireless mouse: i have tried 3 different models of keyboard + mouse wireless combo and all worked very well. Instant response and now i can navigate trought ouya like in Pc hihi
Usb memory sticks: I tried 1gb capacity, and also 4,8,16 and 32gb and all worked witount problems. Take note that you first need to install any file manager to get into usb contents.
Xbox 360 wireless controller: as its seems not to pair, if you use it into any emulator you can pair and configure buttons with it
I tried to use my Logitech g930s and it actually detected it and it allowed to Moro reduce and increase the system volume. Sadly I couldn't hear anything out of them. I might try again some other time.
Glad to hear that multiple USB Devices are working with Ouya.
OP, the Xbox 360 controller is NOT Bluetooth, though the Wii/WiiU/PS3 controllers are.
Sabrent 32' active USB extender works
Logitech Trackman Wheel works
Logitech unifying receiver and MX515 couch mouse work, but is registered as controller 1 at boot. It locked up the OUYA when first tried hot plugging it in to extender. Works when installed before boot, and had been paired by PC.
Belkin 4 port USB hub works plugged in to active 32' cable with trackball and 2gb USB stick. Hot swapped after wireless mouse was unplugged from ouya. wireless Mouse works connected through hub on reconnect. Pushed it with a 32gb stick, which was not recognized. Rebooted and 32gb stick was recognized but not 2gb. Both mice worked but controller still shows up as 2 even though I turned off the mouse when booting.
So what is a good USB game controller available cheap? It is now the end of two business weeks that I requested a replacement controller and I still haven't received it
Sent from my GT-P3113 using Tapatalk 4 Beta
Toshiba 1tb capacity, in NTFS format and helped by an app called "Paragon NTFS&HFS+" worked witout problem, so ouya also has compatibility with high capacity ntfs formatted hard drives ))
TadeoNYC said:
Sabrent 32' active USB extender works
So hat is a good USB game controller available cheap? It is now the end of two business weeks that I requested a replacement controller and I still haven't received it
Sent from my GT-P3113 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Best USB controller hands down is the wired version of the Xbox 360 controller. In the UK its about £20. Very long cable on them with a breakpoint which is handy for kid sisters running through your room. Functions fine under android and windows, can be gotten to work on other Linux systems and Macs fine too. £20 from other brands seems to get you nothing in comparison. Also makes a good club for hitting people when they beat you although the wireless controller has more heft to it so is a bit better there
Nkte, common mistake I have seen people do. Do not buy the play and charge kit for a regular wireless controller thinking it allows you to use it via USB, it doesn't. Also the proper USB reciever for a wireless 360 controller doesn't work correctly on android systems.
Otherwise, Logitech might be your best bet but I personally swear by the wired 360 controllers. Hopefully when the one is released the 360 controllers will have a price crash, I'll probably stock up on a handful more.
I can confirm the PS3 Sixaxis Controller is working!
EDIT: Bluetooth & Wired-connection works fine.
Cool! We have now xbox360 and ps3 sisaxis fully working!!
I have a ps3 media remote but cant get the ouya to see it. Anyone else try this yet?
Update: I was able to see the remote under bluetooth devices but it asks me for a pin number. didnt see one in the manual
Does the xbox 360 wireless adapter (for PC) work for Ouya ?? I got one queued up in my Amazon cart but trying to get some feedback first. Wired 360 controller works great, acts just like an Ouya controller. Wiimote with Wiimote Controller is hit or miss on my programs. Don't have access to any PS3 controllers, but have lots of 360 controllers lying around.
tommy2p said:
Wiimote with Wiimote Controller is hit or miss on my programs.
Click to expand...
Click to collapse
Can you be more specific? So many threads are filled with poor information or redundant information. It would be great if we could all provide as much information as possible. The point of this thread is to inform others of what does and does not work so that they we don't all have to repeat the same trial and error process.
Sent from my GT-P3113 using Tapatalk 4 Beta
tommy2p said:
Does the xbox 360 wireless adapter (for PC) work for Ouya ?? I got one queued up in my Amazon cart but trying to get some feedback first. Wired 360 controller works great, acts just like an Ouya controller. Wiimote with Wiimote Controller is hit or miss on my programs. Don't have access to any PS3 controllers, but have lots of 360 controllers lying around.
Click to expand...
Click to collapse
Yes it does. I cannot compare with a wired one, but for me it is working. The support on the games is not 100% but I dont think that this is a a receiver fault more than a implementation thing. AFAIK there are different input management APIs on ODK. It seems that some games uses hardcoded keycodes instead of new OUYA API for controller compatibility.
For exmplae, in Stalagfligt, none PS3 nor Xbox works, Ice Rage only works with PS3 controller and SCi-Fi fighters with Xbox one.
asanz00 said:
Toshiba 1tb capacity, in NTFS format and helped by an app called "Paragon NTFS&HFS+" worked witout problem, so ouya also has compatibility with high capacity ntfs formatted hard drives ))
Click to expand...
Click to collapse
Do you have to have root for this?
Edit: Yes
tennisbgc said:
I have a ps3 media remote but cant get the ouya to see it. Anyone else try this yet?
Update: I was able to see the remote under bluetooth devices but it asks me for a pin number. didnt see one in the manual
Click to expand...
Click to collapse
Did you try 1234 or 0000? Those tend to be standards for pairing.
Sent from my Hitchhikers Guide to the Galaxy
Hi guys, does anyone know if there's a way to alter the button functions of a USB mouse? I'm using a standard Dell mouse and left, right and middle click are all set to tap, it'd be nice to map right and middle click to different functions if possible, like back and menu.
Are the button functions baked in to the ROM? Or does it depend on which mouse you're using? I had a quick look for mouse button mapping apps but couldn't find anything, it was all virtual mouse apps for controlling PC etc.
Visegrad said:
Did you try 1234 or 0000? Those tend to be standards for pairing.
Sent from my Hitchhikers Guide to the Galaxy
Click to expand...
Click to collapse
someone posted on another site that I should try this app with it https://play.google.com/store/apps/...ImNvbS5qcG4uZnJvbnRpYS53YWthLkJsdWV0b290aCJd
Anyone knows if HFS+ file system is supported out-of-the box?
Logitech K400 wireless keyboard with built in touchpad is working
Kaos2K said:
Anyone knows if HFS+ file system is supported out-of-the box?
Click to expand...
Click to collapse
I think you want "Paragon exFAT, NTFS & HFS+". Free in the Google Play Store.
Anyone use a hub to simultaneously used a mouse ands keyboard?
Sent from my Amazon Kindle Fire using xda app-developers app
At last! Finally the long waited PS3 wireless controller working using bluetooth in new 4.2.2 Version Gratzz SONY Lets emulators LIVE!!
Kelvin0007 said:
At last! Finally the long waited PS3 wireless controller working using bluetooth in new 4.2.2 Version Gratzz SONY Lets emulators LIVE!!
Click to expand...
Click to collapse
I don't understand the hype around it. Why carry a controller around to play games on a 5 inch screen? Makes 0 sense to me. I was able to play Metal Gear Solid, FF7 & 9, Tekken 2 & 3 no problem with the fpse OSD. If you could somehow transform the controller and the z into some kind of nvidia shield, that would be a different story..
Useless thread...
Wysłane z mojego C6603 za pomocą Tapatalk 4
ckyy said:
I don't understand the hype around it. Why carry a controller around to play games on a 5 inch screen? Makes 0 sense to me. I was able to play Metal Gear Solid, FF7 & 9, Tekken 2 & 3 no problem with the fpse OSD. If you could somehow transform the controller and the z into some kind of nvidia shield, that would be a different story..
Click to expand...
Click to collapse
Actually you can connect your phone to big screen via mhl-hdmi connector and use it as console with controller
AGGevorgyan said:
Actually you can connect your phone to big screen via mhl-hdmi connector and use it as console with controller
Click to expand...
Click to collapse
I have been doing this lately when I am staying in hotels for work to watch bbc iplayer etc and using a bluetooth mouse to drive the phone.
I will be interested to try a controller and see how well it works using the Z as a games machine so I am glad the functionality is there!
therealbroxy said:
I have been doing this lately when I am staying in hotels for work to watch bbc iplayer etc and using a bluetooth mouse to drive the phone.
I will be interested to try a controller and see how well it works using the Z as a games machine so I am glad the functionality is there!
Click to expand...
Click to collapse
I just tried to connect one, but it requires usb adapter for syncing or for work, so it is too complicated.
AGGevorgyan said:
I just tried to connect one, but it requires usb adapter for syncing or for work, so it is too complicated.
Click to expand...
Click to collapse
You only have to do this once! I have had this ability on my Tablet S for the past 6 months or so, it makes playing games a lot easier. You don't always have to use the PS3 controller though...
defsix said:
You only have to do this once! I have had this ability on my Tablet S for the past 6 months or so, it makes playing games a lot easier. You don't always have to use the PS3 controller though...
Click to expand...
Click to collapse
Yeah, that's great, but still I need find such adapter
Is the usb adapter just a normal usb host cable you would use to connect a usb drive to the z?
Sent from my C6603 using xda premium
therealbroxy said:
Is the usb adapter just a normal usb host cable you would use to connect a usb drive to the z?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Yup, just the normal micro host cable. Then plug in Usb to mini into your controller. Sync them up and you're done! Disconnect and play wirelessly! You can use SixAxis Controller to add support to games that don't natively support the controller.
Kelvin0007 said:
At last! Finally the long waited PS3 wireless controller working using bluetooth in new 4.2.2 Version Gratzz SONY Lets emulators LIVE!!
Click to expand...
Click to collapse
can you post a screen shot of the ps3 controller option in the xperia settings? is that how you managed to get it working?
AGGevorgyan said:
Yeah, that's great, but still I need find such adapter
Click to expand...
Click to collapse
Just search for OTG cable, got one for 2.5 euro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Urbanos said:
can you post a screen shot of the ps3 controller option in the xperia settings? is that how you managed to get it working?
Click to expand...
Click to collapse
You just have to connect one time with the cable to pair it, after that you can use it wireless until you pair it with another device and you need to re-pait it with the cable. It's a one step operation easy and fast.
babylonbwoy said:
Just search for OTG cable, got one for 2.5 euro
You just have to connect one time with the cable to pair it, after that you can use it wireless until you pair it with another device and you need to re-pait it with the cable. It's a one step operation easy and fast.
Click to expand...
Click to collapse
Thanks.
babylonbwoy said:
Just search for OTG cable, got one for 2.5 euro
You just have to connect one time with the cable to pair it, after that you can use it wireless until you pair it with another device and you need to re-pait it with the cable. It's a one step operation easy and fast.
Click to expand...
Click to collapse
Sweet! i saw they had this for the Xperia S - but on 4.1.2 they didn't have the dualshock options - so confirming once more, this is on the C6603 4.2.2 Spain Stock Rom?
babylonbwoy said:
Just search for OTG cable, got one for 2.5 euro
You just have to connect one time with the cable to pair it, after that you can use it wireless until you pair it with another device and you need to re-pait it with the cable. It's a one step operation easy and fast.
Click to expand...
Click to collapse
i upgraded to 4.2.2 yesterday and now i see the settings in xperia settings! sweet! but problem for me - it works while connected to USB through the OTG cable, but does not work wirelessly! i tried connect/reconnecting rebooting, bluetooth on/off about 20x...........guessing my controller my be messed up... it was hit and miss sometimes with recgonizing it even with the usb cord..
any suggestions? i want to use it wirelessly for sure!
Question: if you pair a PS3 controller for the first time..does it then work with all PS3 controllers or do you need the cable for everytime you try a new controller?
edit: sorry didn'tread
DoubleYouPee said:
Question: if you pair a PS3 controller for the first time..does it then work with all PS3 controllers or do you need the cable for everytime you try a new controller?
Click to expand...
Click to collapse
You need to pair each controller as the other controllers will still be paired with the ps3.
Sent from my C6603 using xda premium
Urbanos said:
i upgraded to 4.2.2 yesterday and now i see the settings in xperia settings! sweet! but problem for me - it works while connected to USB through the OTG cable, but does not work wirelessly! i tried connect/reconnecting rebooting, bluetooth on/off about 20x...........guessing my controller my be messed up... it was hit and miss sometimes with recgonizing it even with the usb cord..
any suggestions? i want to use it wirelessly for sure!
Click to expand...
Click to collapse
Did you try with your PS3 wirelessly ? If it works with PS3 then your mobile or its connexion is the problem
Also it doesn't works with all game, tried with The Dark Night Rises without results.
babylonbwoy said:
Did you try with your PS3 wirelessly ? If it works with PS3 then your mobile or its connexion is the problem
Click to expand...
Click to collapse
Urbanos said:
i upgraded to 4.2.2 yesterday and now i see the settings in xperia settings! sweet! but problem for me - it works while connected to USB through the OTG cable, but does not work wirelessly! i tried connect/reconnecting rebooting, bluetooth on/off about 20x...........guessing my controller my be messed up... it was hit and miss sometimes with recgonizing it even with the usb cord..
any suggestions? i want to use it wirelessly for sure!
Click to expand...
Click to collapse
Strange, for me its seems to work as should using FW 4.2.2 .423 ES, check your controller first with a PS3, also when you use OTG cable in the xperia settings it marks a blue notification when the phone recognizes the controller after that just disconnect and use bt instead.
It wont work here, i bought a female usb connector so that i can connect the USB cable of my Xperia z with the USB cable of my PS3 controller. Anyone an idea why this wont work? I think it gives the same effect like the cable discribed in other massages (from Xperia to USB)...
Hi there,
let me explain my goal. I want to use my shield for all my PC gaming. Portable around the house, and that is great when the main TV is being used by other members of my family.
But also it's great to connect it to the TV when it's available. My main PC is a desktop one used for working and when I play I don't want to be there. I prefer sofa, bed, etc.
So, I wanted to have a fine console experience in my sofa in front of the tv, but wirelessly. I have these accesories for it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USB OTG, HDMI, USB hub, USB-ethernet (the one that actually works is this: http://plugable.com/products/usb2-e1000 ), and wireless Xbox controller with the usb receiver.
Well,
I almost have it, but not 100%.
HDMI works
Ethernet works
USB hub works
Xbox controller works but D-pad does not, and that is frustrating, because every other button works fine and it's a joy to lie in my sofa to play that way. Some games need the D-pad and because of that this is not a solution.
The other way to use the Xbox controller is leaving it connected to the PC and it works good when I'm in front od the TV because my PC is just upstairs. BUT, most of the games when launched from Shield ignore the controller of the PC and only work with the Shield itself...
Is anyone crazy enough to try this way of gaming?
I know the Nyko dock would help to achieve this, but it's completely missing since it was announced...
Would a bluetooth gamepad work with all the buttons (D-pad included) for a perfect PC streaming experience???
Tomorrow I friend will let my try a PS3 controller. Let's see how it performs. I did not want to root, but I will at least to try it wirelessly.
king conan said:
Is anyone crazy enough to try this way of gaming?
Click to expand...
Click to collapse
I use an OnLive controller. I haven't tried the XBox 360 Wireless dongle, but Bluetooth works great. If you're looking for a controller that has similar build quality and characteristics, I strongly recommend the OnLive one, even without the service (I don't have the service, just the control).
I'll give the dpad a try this weekend and verify it works on my SHIELD though, since I haven't tested that extensively.
agrabren said:
I use an OnLive controller. I haven't tried the XBox 360 Wireless dongle, but Bluetooth works great. If you're looking for a controller that has similar build quality and characteristics, I strongly recommend the OnLive one, even without the service (I don't have the service, just the control).
I'll give the dpad a try this weekend and verify it works on my SHIELD though, since I haven't tested that extensively.
Click to expand...
Click to collapse
Thanks for answering.
Yesterday I tried a PS3 controllorer. I rooted my shield to use it wirelessly with the sixaxis app, and it works exactly the same as the Xbox controller. All the buttons are OK, except D-PAD ones.
It's weird, beacues the D-pad buttons work fine in the shield interface but not with PC-Steam games. It's a very small detail but if Nvidia solves this in future update would be perfect.
king conan said:
Thanks for answering.
Yesterday I tried a PS3 controllorer. I rooted my shield to use it wirelessly with the sixaxis app, and it works exactly the same as the Xbox controller. All the buttons are OK, except D-PAD ones.
It's weird, beacues the D-pad buttons work fine in the shield interface but not with PC-Steam games. It's a very small detail but if Nvidia solves this in future update would be perfect.
Click to expand...
Click to collapse
I didn't try streaming (I handle only the Android side of things) but I'll make sure a bug exists about it. I'll bet it'll get fixed pretty quick.
Same issue here!
I am having the EXACT same issue! Everything works perfectly except for the d-pad. I've also noticed that the right analog stick does not work like a "mouse" on the home screen like the native controller does.
If these 2 items would be fixed, I would have a veritable portable "steam machine" in my living room!
Will follow this thread and hope there is a resolution soon! I bought the Xbox 360 Receiver for this express purpose! Note: The wired 360 controller works perfectly, so was surprised about the wireless one not working.
The wired one is special, but I'd expect thus stuff to get fixed. I'll try to look into it.
Sent from my One using XDA Premium HD app
jchalk59 said:
I bought the Xbox 360 Receiver for this express purpose! Note: The wired 360 controller works perfectly, so was surprised about the wireless one not working.
Click to expand...
Click to collapse
What do you mean it does not work?
PC receiver for Xbox controller works fine with the shield.
You can see my setup in the picture above and it works the same as a wired one.
You need the controller receiver:
http://www.amazon.com/Xbox-360-Wireless-Gaming-Receiver-Windows/dp/B000HZFCT2
And a true Xbox 360 wireless controller:
http://www.amazon.com/Xbox-360-Wireless-Controller-Glossy-Black/dp/B003ZSP0WW/ref=pd_sim_vg_1
If you root your shield, the PS3 controller is a good choice too. Less cables involved because you will be using bluetooth to pair with the shield.
But as we said, it's not a perfect experience. Many PC modern games use D-Pad buttons for extra options and without them you can't play properly.
I think you're being too literal on "not working" there King Conan. Read his post, he's having the same issue with lack of d-pad on the wireless. He considers this to be not working probably because of games that require the controls. I would have to agree, I use d-pad all the time.
but he says the wired works and the wireless don't...
Both work exactly the same, that's why I didn't get him.
It's not just the wireless with the d-pad problem, wired is the same way?
Yes D-PAD problem happens wired or wireless.
The funny thing is that DPAD works fine in Android interface but doesn't in PC steam games.
Gotcha, sorry. I read the entire thread but for whatever reason I took away the problem was exclusive to wireless.
Hopefully they fix it in the next update, I just ordered a micro-HDMI cable and USB OTG adapter ;/
The wired and wireless ones report currently to Android at the low level.
Sent from my One using XDA Premium HD app
I've confirmed that there is definite work to improve external controllers, and we're working directly with multiple controller vendors to ensure their BT controllers are optimized for gameplay.
agrabren said:
I've confirmed that there is definite work to improve external controllers, and we're working directly with multiple controller vendors to ensure their BT controllers are optimized for gameplay.
Click to expand...
Click to collapse
Did Nvidia say that?
Or do you work with them?
That's great to hear.
king conan said:
Did Nvidia say that?
Or do you work with them?
That's great to hear.
Click to expand...
Click to collapse
I'm a technical lead on SHIELD at NVIDIA. So yes, they did say that. I had to get details from management about what I could say before I could make any official statement about improved controller support.
agrabren said:
I'm a technical lead on SHIELD at NVIDIA. So yes, they did say that. I had to get details from management about what I could say before I could make any official statement about improved controller support.
Click to expand...
Click to collapse
Sweet! I've been trying to get the Mogo Pro controller working with my Shield, but to get the Universal Driver to work, it has to be rooted. Not going to root my Nvidia Shield, having too much fun with it. Once I get a reasonable wireless controller working with my Shield, this thing is going to be a powerhouse game console connected to a 50" TV.
atarumoroboshi18 said:
Sweet! I've been trying to get the Mogo Pro controller working with my Shield, but to get the Universal Driver to work, it has to be rooted. Not going to root my Nvidia Shield, having too much fun with it. Once I get a reasonable wireless controller working with my Shield, this thing is going to be a powerhouse game console connected to a 50" TV.
Click to expand...
Click to collapse
You can use my app. Tested and running. (TIncore keymapper)
Btw. The latest beta (3.0.5) has some UI fixes for the shield.
Thank you Nvidia!! Also thank you PowerA!! These two companies support development!!
tincore said:
You can use my app. Tested and running. (TIncore keymapper)
Btw. The latest beta (3.0.5) has some UI fixes for the shield.
Thank you Nvidia!! Also thank you PowerA!! These two companies support development!!
Click to expand...
Click to collapse
Hi tincore!
can your app replicate all the shield buttons including the D-PAD ones? Have you tried in a shield?
Makes any sense to try your app with a xbox controller?
thank you!
king conan said:
Hi tincore!
can your app replicate all the shield buttons including the D-PAD ones? Have you tried in a shield?
Makes any sense to try your app with a xbox controller?
thank you!
Click to expand...
Click to collapse
What you mean exactly by replicate? Every button and stick funcion can be remapped.
I don't have an xbox controller but I imagine that the kernel has the gamepad modules so if you are rooted it should work. If you are not rooted this is also possible but I would need a data capture so I can include it on the next release.
http://tincore.wiki-site.com/index.php/Usage#USB_Data_capturer