Related
I bought a Xoom 3 days ago and rooted. Installed CWM. This is my second Android device. My question is this. I was looking for the sdcard2 folder, as I had though i had seen it once before. After installing CWM I don't see it. I used the 1 click root + kernel method. Am i missing it, or do I need to take a few more steps?
I rooted my A500 and installed Honeyvillian along with the kernel for it. Kernel verison is 2.6.36.4 1.0+ build is 1/05
Everything was find until my son started messing with it and it appears that he did a factory reset. Still have root and the above kernel. Can no longer see my external SD at all no even though it showed before. Even tried the sd format program listed in various threads but no go. Have tried 4 other sd cards and it can not see them either.
I would like to go back to stock but without being able to access the sd what are my options?
boot into recovery
Have you tried to get back into recovery.can you use Acer recovery installer to reinstall cmr.most likely your SD card will be available there.
But im no expert.
Good luck
Can get into recovery just fine but still no sd available.
ok I grabbed Acer_A500_1.139.04_4.010.40_COM_GEN1_1310549093367_fc47717e.zip from another thread and put it on my thumb drive and recovery was able to see it. Now showing kernel version 2.6.36.3 and the above build number.
Can someone confirm that this is correct for stock? Appears root is now gone but still can not see sd card.
uk version
The current us Verdun ends in.13
Am I the only one having this issue?? I went ahead and installed the 3.2 version of HoneyVillain and no instead of seeing unavailable under SD card, it now says Mount SD card. Have a total of three SD cards that use to work but now none do.
What are the correct permission settings for the external SD? Mine is showing -------.
so i have cm 7.3.0-encore installed and
1) i cant get the android apps to install
2)cm mod( rom manager 4.2.0.2 clockwork mod 3.2.0.1) will not let me updgrade to premium
when i try to download rom it tells me i must upgrade rom manager to latest version and when i press ok i get another box that says "the application ROM Manager process com.koushikdutta.rommanager) has stopped unexpectedly please try again" and when i press ok i get sent bact to the home screen.
3)when i try to reboot into recovery,1) with the sd card in,i get booted to the main cyanogen mod home screen
4) and when i try to install gapps i go into the recovery,/install zip from sd card/choose zip from sd card/confirm install/when it says install complete,i exit out(reboot system now)it goes back to the main nook color screen so i have to power the nook off and back on so it can boot into cm. once back in cm,i dont have any market.
Oh and my software version is 1.2.0
PLEASE HELP!!
As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.
votinh said:
As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.
Click to expand...
Click to collapse
i hvae to pull up the site i got the mod from (i believe it was the cyanogen forum,ill get back to you on that)
2 1.2.0 is the stock nook firmware.(i believe they are up to 1.4 now)
3 i have no idea what your talking about.(im hoping your asking wether im running from internal or sd card. if that is the case,im running from the sd card
OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.
DizzyDen said:
OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.
Click to expand...
Click to collapse
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager
bigicedog said:
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager
Click to expand...
Click to collapse
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957
votinh said:
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957
Click to expand...
Click to collapse
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP
bigicedog said:
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP
Click to expand...
Click to collapse
Did I just said whatever you did or have done, described on your very first post were screw up?
Why would you do that?
You follow to step 10, you are very close to get it up and running then you continue to do the wrong way. That's why you can't get your NC work.
On which instruction you got that shows you doing the "went down to "install zip from sd card,choose zip from sd card" when you are running CM7 from uSD?
My suggestion, start over again, go slow.
Since using the uSD, why not using the stable CM7.1 or CM7.2 KANG? Get rid of the 7.0.3
I recently installed CM 7 to emmc after running it from sd for a year. When I first did the emmc install I used mirage 3/4 but when 7.2 was released I decided to try it. Now I want to install the new mirage kang but when I copy the file to my sd card it's not there when CWM looks for it. I wiped data and cache but every time I have CWM look for the file to install it only finds CM 7.2. Any thoughts?
I tried to search but not being able to search for exact phrases makes it hard to find anything.
[edit] When I get home I'll try reinstalling from the eyeballer card I made. Should I format my non-recovery sd card? I didn't need to use the eyeballer card to install 7.2. What's going on here?
irisclara said:
I recently installed CM 7 to emmc after running it from sd for a year. When I first did the emmc install I used mirage 3/4 but when 7.2 was released I decided to try it. Now I want to install the new mirage kang but when I copy the file to my sd card it's not there when CWM looks for it. I wiped data and cache but every time I have CWM look for the file to install it only finds CM 7.2. Any thoughts?
I tried to search but not being able to search for exact phrases makes it hard to find anything.
[edit] When I get home I'll try reinstalling from the eyeballer card I made. Should I format my non-recovery sd card? I didn't need to use the eyeballer card to install 7.2. What's going on here?
Click to expand...
Click to collapse
Which SD did you put the mirage file on? If you were still using the SD from your SD install, it is not partitioned right to be using with CWM. CWM is expecting just a plain vanilla SD. You may have the mirage file on partition 4 which CWM cannot see.
It was the card from my sd install but I had formatted it when I originally did the emmc install. Also, I used a different card for the emmc install.
What I don't understand is how I updated to 7.2 by putting the file on the sd card and installing it from CWM but when I did the same thing to install the latest Mirage kang it didn't work. I tried toggling the signed requirement in CWM since Mirage isn't signed but it didn't make any difference. Even now that I deleted data and caches and installed Mirage from CWM card the 7.2 file is still on my main sd card and I can't delete it. Do I need to use the CWM card every time I do an update? Could TiBU be causing this?
irisclara said:
It was the card from my sd install but I had formatted it when I originally did the emmc install. Also, I used a different card for the emmc install.
What I don't understand is how I updated to 7.2 by putting the file on the sd card and installing it from CWM but when I did the same thing to install the latest Mirage kang it didn't work. I tried toggling the signed requirement in CWM since Mirage isn't signed but it didn't make any difference. Even now that I deleted data and caches and installed Mirage from CWM card the 7.2 file is still on my main sd card and I can't delete it. Do I need to use the CWM card every time I do an update? Could TiBU be causing this?
Click to expand...
Click to collapse
Do you have your emmc and SD card swapped in CM? You may think you have it on SD but really have it on emmc. And CWM can't see emmc.
No, at least I didn't set it that way. I skipped that part of mr72's guide. Not only that but I tried putting a copy each on my emmc and my sd and it disappeared from the card and wasn't seen on the emmc.
I redid the whole install earlier. I'm going to try putting a Mirage file on the card now and see if CWM sees it.
irisclara said:
I recently installed CM 7 to emmc after running it from sd for a year. When I first did the emmc install I used mirage 3/4 but when 7.2 was released I decided to try it. Now I want to install the new mirage kang but when I copy the file to my sd card it's not there when CWM looks for it. I wiped data and cache but every time I have CWM look for the file to install it only finds CM 7.2. Any thoughts?
I tried to search but not being able to search for exact phrases makes it hard to find anything.
[edit] When I get home I'll try reinstalling from the eyeballer card I made. Should I format my non-recovery sd card? I didn't need to use the eyeballer card to install 7.2. What's going on here?
Click to expand...
Click to collapse
OP, I've tried to help but really, I can't understand your issue, especially this: "I have CWM look for the file to install it only finds CM 7.2"
What else do you expect it looks for and finds?
Anyway, pls do list as much as info so we can help. I don't want to guess.
1. What is your current system? Is it still running fine?
2. I understand you want to update Cm7. Which version?
3. Since you are running CM7 from eMMC, let just focus on 1 uSD, called "flashable CwM Recovery" uSD. Version 3.2.0.1 is preferred.
4. Do list what else (which files) you have on that uSD. (Using windows)
5. Briefly describe how and what shows on the CwM Recovery window
The more info we gather, the better chance we pinpoint to your problem
update-encore_CM72-MiRaGe-03232012.zip and update-cm-7.2.0-RC1-encore-signed.zip have different file names. When I put the Mirage file on the card CWM doesn't see it. Instead it sees the CM 7.2 RC1 file. That's why I was guessing TiBU, because normally when I flash a file it disappears from the card. I flashed CM 7.2 RC but it won't go away, even if I try to delete it. After conducting the experiment from my previous post I am wondering if my flash card is going bad. I'll do further experiments along that line today.
1. What is your current system? Is it still running fine?
update-encore_CM72-MiRaGe-03232012; occasionally says sd card not installed or available
2. I understand you want to update Cm7. Which version?
I wanted to go to update-encore_CM72-MiRaGe-03232012 which I have now accomplished
3. Since you are running CM7 from eMMC, let just focus on 1 uSD, called "flashable CwM Recovery" uSD. Version 3.2.0.1 is preferred.
yes...
4. Do list what else (which files) you have on that uSD. (Using windows)
I'm not sure I understand what you want here but here's a list of what's on the CWM card: folder (.android secure), folder (Android), folder (DCIM), folder (LOST.DIR),gapps-gb-20110828-signed.zip, mlo, u-boot.bin, uImage, update-encore_CM72-MiRaGe-03232012.zip, update-encore-cwm.emmc-eyeballer.zip, uRamdisk
5. Briefly describe how and what shows on the CwM Recovery window
If you are referring to when I run CWM from this card it installs everything fine.When I wrote this question I was trying to flash the Mirage ROM from recovery and after I selected "install from sd" and "choose which file to install" my only choice was update-cm-7.2.0-RC1-encore-signed.zip rather than the update-encore_CM72-MiRaGe-03232012.zip I expected to see.
Thanks for trying to help. Later today I will try copying my data sd card to another card and see if that fixes the programs saying the card is not available. If it does I will assume the other card is bad. Seem reasonable?
irisclara said:
update-encore_CM72-MiRaGe-03232012.zip and update-cm-7.2.0-RC1-encore-signed.zip have different file names. When I put the Mirage file on the card CWM doesn't see it. Instead it sees the CM 7.2 RC1 file. That's why I was guessing TiBU, because normally when I flash a file it disappears from the card. I flashed CM 7.2 RC but it won't go away, even if I try to delete it. After conducting the experiment from my previous post I am wondering if my flash card is going bad. I'll do further experiments along that line today.
Click to expand...
Click to collapse
a. For less complicated, do just put ONE file in the root folder of your CwMR uSD card, not two. Just put the Mirage there, remove the other.
b. FYI, the latest Mirage is also CM7.2-RC1.
2. I understand you want to update Cm7. Which version?
I wanted to go to update-encore_CM72-MiRaGe-03232012 which I have now accomplished
Click to expand...
Click to collapse
So, you're done? all good? I thought you said you cannot perform the update due to file could be found by CwMR.
4. Do list what else (which files) you have on that uSD. (Using windows)
I'm not sure I understand what you want here but here's a list of what's on the CWM card: folder (.android secure), folder (Android), folder (DCIM), folder (LOST.DIR),gapps-gb-20110828-signed.zip, mlo, u-boot.bin, uImage, update-encore_CM72-MiRaGe-03232012.zip, update-encore-cwm.emmc-eyeballer.zip, uRamdisk
Click to expand...
Click to collapse
Ideally, it should only consist of those files that related for boot such "bold" and those flashable zip files. I don't know why those other folders gotten in there. Have this CwMR card being used on any system as storage b4?
5. Briefly describe how and what shows on the CwM Recovery window
If you are referring to when I run CWM from this card it installs everything fine.When I wrote this question I was trying to flash the Mirage ROM from recovery and after I selected "install from sd" and "choose which file to install" my only choice was update-cm-7.2.0-RC1-encore-signed.zip rather than the update-encore_CM72-MiRaGe-03232012.zip I expected to see.
Click to expand...
Click to collapse
If what you listed on 4) above is all correct, then what you see is the Mirage CM7.2 RC1
Well, I guess I have my answer. I tried to format my 16 GB data card and it wouldn't format. Looks like card failure. Unless someone has a better idea I'm just going to order another card and chalk this up to running the OS off the card for so long. If flash memory only has a limited number of read/write cycles that must have burned through them.
Thanks votinh, leapinlar. Any other advice, suggestions, ideas on the situation will be appreciated.
irisclara said:
Well, I guess I have my answer. I tried to format my 16 GB data card and it wouldn't format. Looks like card failure. Unless someone has a better idea I'm just going to order another card and chalk this up to running the OS off the card for so long. If flash memory only has a limited number of read/write cycles that must have burned through them.
Thanks votinh, leapinlar. Any other advice, suggestions, ideas on the situation will be appreciated.
Click to expand...
Click to collapse
Read/write cycle of the flash devices are usually high, 2000+ time, I doubt that you have burnt through.
Anyway, what tool you use to format your uSD?
---------- Post added at 12:04 PM ---------- Previous post was at 12:01 PM ----------
If I was you, b4 purchasing another card, I would try to reformat the card and re-create its flashable CwMR.
If that didn't help, then order new one but note since you only need it for install ROM, 1GB or 2GB is more than enough.
I want at least a 16 GB card for my data and media. I have a 4 GB that I use for CWM and OS testing. I was using the 16 GB card for my OS when I was running off the card. After I installed to emmc I used the 16 GB card for data. The 16 GB is the card that I was having the problem with at the beginning of this thread. Since then I copied everything except my media onto the formatted 4 GB card and everything is running fine. I tried to format the 16 GB card using HPUSBDiskFormat but I got a message "Cannot Format". What program should I be using to format the card?
Other strange things that make me think the 16 GB card was the problem: I recently put some books on the card but they disappeared, one of my apps that is installed on the card keeps disappearing and I have to reinstall it, picture gallery keeps telling me that it can't read the sd, I can't delete files from the card either on the Nook or on my computer.
I hope it isn't the card and you guys know exactly what the deal is but after I put the 4 GB card in place of the 16 GB those problems aren't happening anymore. The final test will be to put an update file on the 4 GB card and boot to recovery. If CWM can see it I can't see how the 16 GB card isn't the problem.
votinh said:
a. For less complicated, do just put ONE file in the root folder of your CwMR uSD card, not two. Just put the Mirage there, remove the other.
Click to expand...
Click to collapse
I am aware of that but I couldn't get the non-Mirage file to delete. I tried but it wouldn't go away.
b. FYI, the latest Mirage is also CM7.2-RC1.
Click to expand...
Click to collapse
I am aware of this. Mirage has different buttons and other tweaks.
So, you're done? all good? I thought you said you cannot perform the update due to file could be found by CwMR.
Click to expand...
Click to collapse
There's CWM on the card and CWM on the Nook. I could not get CWM on the Nook to see the update file on a non-CWM card. Previously it had. I got it to work by reinstalling from my CWM 4 GB card.
Ideally, it should only consist of those files that related for boot such "bold" and those flashable zip files. I don't know why those other folders gotten in there. Have this CwMR card being used on any system as storage b4?
Click to expand...
Click to collapse
This card was formatted with HPUSBDiskFormat before writing CWM to it.
If what you listed on 4) above is all correct, then what you see is the Mirage CM7.2 RC1
Click to expand...
Click to collapse
I am aware of this. The fact that it wasn't working like that is the reason I started this thread.
Thanks for your help.
Now, it's a bit clearer that you have both CwM Recovery.
As I always mentioned and recommended NOT to flash CwMR into eMMC as it causes more headache than good but still many others choose to go that way and report more issue. Anyway, let's put that aside.
First step, reformat your 16GB card using MiniTools Wizard. I wish you luck there, if it can't, toss the card but if it's OK then second step, create a flashable CwMR 3.2.0.1 and put just the Mirage ROM in there.
I'm sure you know what to do.
Let us know how things go.
I may have done a dumb thing in installing CWM to the emmc but I was following a guide and didn't want to screw anything up. The reason I put off the emmc install for so long is that fear of bricking my Nook. So far so good on that front.
That tip about MiniTools is very helpful. I was sure there was something better than what I was using but I didn't know what it was. So far I'm getting very strange results when trying to format the card. The program says that the format worked but the files are still on the card. Surface test didn't show any errors. I tried to remove the old partition and create a new one but while that appeared to work there was no change on the card. I do notice that it wants to format the card in NTFS but I was under the impression that it should be FAT 32.
Is the card trashed? I can't think of anything else to try. I even flipped the lock switch and checked it. Still can't delete anything. I can't even delete a picture that I put on there.
As a last hope I tried putting the 16 GB card in my camera to see if the camera could format it. No luck. If the camera can't do anything with it the card is dead. Oh well, at least I got all my data off of it.
Votinh, do you know of any guide to removing CWM from emmc? It wasn't the problem in this case but it's not necessary. I didn't really want it but I thought that's how flashing worked on emmc. I see now that I can use ROM Manager for that.
irisclara said:
As a last hope I tried putting the 16 GB card in my camera to see if the camera could format it. No luck. If the camera can't do anything with it the card is dead. Oh well, at least I got all my data off of it.
Votinh, do you know of any guide to removing CWM from emmc? It wasn't the problem in this case but it's not necessary. I didn't really want it but I thought that's how flashing worked on emmc. I see now that I can use ROM Manager for that.
Click to expand...
Click to collapse
Honestly, I chose to never flash CwMR into eMMC so I don't have much experience how to remove it, but I'm sure there is way. Will report back if I stumble across any thread about it. NOTE: having CwMR in eMMC is NOT so bad, it just gets you more headache down the road. A lot of people get it installed.
About your card, it's very itchy, ehhhh
Have you actually hit the format button or done or save whatever? and do so with FAT32, not NTFS.
It's first time I've heard the issue.
Yes, unfortunately. I hit format and then the check mark on the far left which I'm pretty sure is save. It certainly said it was doing something and that it had completed the operation successfully. All the files are still on the card though, after 2 formats, one NTFS and one FAT 32, remove and create, and 1 wipe. The files are all still showing on the card and I can't delete any or add any new.
What brand of your 16GB card is it?
I can't imagine that card was extensive damage like that.
Format many times and files still there, amazing.
The card is a Dane Electric from Newegg. I was surprised that it worked as well as it did for running the OS since it's not a SanDisk.
Is it possible to run stock nook color Rom off an sdcard while running cm7.2 kang with mirage kernel on emmc?
I know its possible to install and run other Rom off an sdcard, I was just curious. Thanks in advanced if its possible or not.
Sent from my Nook Color on CM 7.2 KANG build
brsingr said:
Is it possible to run stock nook color Rom off an sdcard while running cm7.2 kang with mirage kernel on emmc?
I know its possible to install and run other Rom off an sdcard, I was just curious. Thanks in advanced if its possible or not.
Sent from my Nook Color on CM 7.2 KANG build
Click to expand...
Click to collapse
No. I know dizzyden was working on a way to make that happen, but as far as I know, stock only works on emmc.
But you could put stock back on emmc and your Kang on SD.
Ah ok, thanks for the help
Sent from my R800x using xda app-developers app
leapinlar said:
No. I know dizzyden was working on a way to make that happen, but as far as I know, stock only works on emmc.
But you could put stock back on emmc and your Kang on SD.
Click to expand...
Click to collapse
Would it be possible to just do a cwm backup of my current Rom then restore it onto the sdcard install?
Sent from my Nook Color on CM 7.2 KANG build
brsingr said:
Would it be possible to just do a cwm backup of my current Rom then restore it onto the sdcard install?
Sent from my Nook Color on CM 7.2 KANG build
Click to expand...
Click to collapse
No. Apparently there is some code in the ROM that expects it to be on emmc. It fails if on SD.
Sent from my Nook Color running CM10 and Tapatalk.
Ok. Thanks leap
Sent from my Nook Color on CM 7.2 KANG build
Well in answer to the original poster in this thread, I now have a way to get Stock on a verygreen SD. Look at my tips thread linked in my signature and look at item B11 in the second post of that thread. You can even have rooted stock with OC and apps2SD support.
I am still working on a method of having stock on SD while still using data on /dev/block/mmcblk0p2... I have not given up... just gotten side tracked a time or two.
DizzyDen said:
I am still working on a method of having stock on SD while still using data on /dev/block/mmcblk0p2... I have not given up... just gotten side tracked a time or two.
Click to expand...
Click to collapse
Mine does that. Just had to modify the ramdisk.
Thanks for all the help and Info leap and dizzy ....ill go try it out and let you know
edit: Its been awhile since i made a sd rom....so far i have made the sdcard from This and i dont exactly understand how to do the rest of it properly, my nook color is on the cm7.2 kang build with mirage kernel and in Leap's instructions it says
leapinlar said:
So the procedure to get this working is to prepare a verygreen SD using the image file attached to my SD installation instructions thread here (generic-sdcard...). Then boot it at least once with the SD installed in the Nook so the SD can partition itself. If you have an existing verygreen SD prepared, you can skip those two steps. Copy the zip files to somewhere that recovery can find them. If you use the newest versions of CWM or TWRP recovery they can read files from emmc media storage. Boot to recovery and insert the prepared verygreen SD into the Nook. Flash the ROM zip to the SD. It will format the system and data partitions on the SD and install the ROM. Boot to the SD and the new stock ROM should load. Follow the directions to register with B&N. Once you have registered you can stop there if you are satisfied with plain stock. But be warned, if B&N decides to update to a new version in the future, it may mess up whatever you have installed on emmc. Therefore I recommend that you flash the Block Updates zip which blocks OTA updates. If you flash Manual Nooter you do not have to flash Block Updates separately since it is included in Manual Nooter. To install Block Updates, Manual Nooter or OC/apps2SD support, flash the zips to the SD with recovery just like you did the ROM. If you flash Manual Nooter, it has gapps and Market with it so you must register them with Google. And you need root if you want to the OC and apps2SD support, plus you will need a program like SetCPU to adjust the processor.
You can get the modified 1.4.3 B&N stock ROM zip here, the modified Manual Nooter zip here, the modified OC/apps2SD zip here, and the modified Block Updates zip here (all four modified for verygreen SD installation).
Click to expand...
Click to collapse
I have done the partitioning on the sdcard so it now has the 4 partitions in it....the nook is running CWM 3.2.0.1 emmc recovery. I've downloaded all 4 zip files, but i only plan on putting the stock nook, and manual nooter (leap says it includes the update blocker) on it
Sent from my R800x using xda app-developers app
You need to update your emmc recovery to a newer version so that you can flash those zips from internal memory (emmc media). You will run into problems finding the files with 3.2.0.1 since you have to take your normal SD out and put your verygreen SD in.
So flash this zip:
http://forum.xda-developers.com/showthread.php?p=23537853
Then copy the downloaded files to emmc media, boot to the new CWM and select the files from internal memory and flash them to your inserted verygreen SD.
EDIT: I just updated my instructions in my tips to make that clearer. Thanks.
leapinlar said:
You need to update your emmc recovery to a newer version so that you can flash those zips from internal memory (emmc media). You will run into problems finding the files with 3.2.0.1 since you have to take your normal SD out and put your verygreen SD in.
So flash this zip:
http://forum.xda-developers.com/showthread.php?p=23537853
Then copy the downloaded files to emmc media, boot to the new CWM and select the files from internal memory and flash them to your inserted verygreen SD.
EDIT: I just updated my instructions in my tips to make that clearer. Thanks.
Click to expand...
Click to collapse
Ok, ive put the bandn 1.4.3 rom zip onto the emmc of the nook color and the manuak nooter in the same place. Im running the cwm you linked and i can now select them, my questionnow is: when it says install zip from sdcard i scroll down and select the choose zip from internal and it finds both zips....after i booted to cwm i inserted the verygreen sdcard, how will i know the stock nook will flash to the sdcard and not the internal?
brsingr said:
Ok, ive put the bandn 1.4.3 rom zip onto the emmc of the nook color and the manuak nooter in the same place. Im running the cwm you linked and i can now select them, my questionnow is: when it says install zip from sdcard i scroll down and select the choose zip from internal and it finds both zips....after i booted to cwm i inserted the verygreen sdcard, how will i know the stock nook will flash to the sdcard and not the internal?
Click to expand...
Click to collapse
I have built in safeguards to make sure that won't happen. If no SD is in the slot, it won't flash, if the SD in the slot is not formated with 4 partitions, it won't flash. And when it finally does flash, it is hard coded to go to SD. Flash away. First ROM then a little later after you have registered and let it finish loading books, the manual nooter.
Sent from my Nook Color running CM10 and Tapatalk.
leapinlar said:
I have built in safeguards to make sure that won't happen. If no SD is in the slot, it won't flash, if the SD in the slot is not formated with 4 partitions, it won't flash. And when it finally does flash, it is hard coded to go to SD. Flash away. First ROM then a little later after you have registered and let it finish loading books, the manual nooter.
Sent from my Nook Color running CM10 and Tapatalk.
Click to expand...
Click to collapse
Works perfectly
now to go install the manual nooter
Much Thanks to Leap and Dizzy.
brsingr said:
Works perfectly
now to go install the manual nooter
Click to expand...
Click to collapse
Congratulations! You are my first user to report it working besides my own testing.
leapinlar said:
Congratulations! You are my first user to report it working besides my own testing.
Click to expand...
Click to collapse
cool ....i dont know if its normal or not but it does seem to take forever to download the books, when i wsa using the android app it didnt seem to take as long....maybe they are just have server bugs or something?
i think after the books are done downloading then ill root it.
brsingr said:
cool ....i dont know if its normal or not but it does seem to take forever to download the books, when i wsa using the android app it didnt seem to take as long....maybe they are just have server bugs or something?
i think after the books are done downloading then ill root it.
Click to expand...
Click to collapse
It took me a very long time to download the books and I have a fast connection. I think B&N just pushes them out slow for stock. Other stuff downloads fast, like once you are rooted and you download apps from play store.
leapinlar said:
It took me a very long time to download the books and I have a fast connection. I think B&N just pushes them out slow for stock. Other stuff downloads fast, like once you are rooted and you download apps from play store.
Click to expand...
Click to collapse
hmm ok, so its not just me then...thats good lol
brsingr said:
hmm ok, so its not just me then...thats good lol
Click to expand...
Click to collapse
hmm...now im having problems redownloading some books that started to download, but i turned the nook off when i went out to dinner and now i cant tell if the books that were downloading are actually continuing to download or not...would it be possible to download the books on the cm7.2 android app and then copy them over to the nook sd?
Brah....dang it...I messed up by accidently hitting the erase and deregister button.....it didn't seem to erase anything, but it did deregister it...would I have to remake the SD and then reflash the rom again? (Not that it is a big deal or time consuming to do lol)
Sent from my Nook Color on CM 7.2 KANG build