Database Users

MIUI Nook Color 1.9.16 on SD Card?

I have searched diligently and have yet to find specific instruction for creating a bootable SD card for my NC with MIUI Nook Color 1.9.16 (or any version of MIUI for that matter).
I am currently running a fully rooted version of 1.3 on the emmc and "all is well" and I need it left that way so as to continue having access to "in store reading" which I use quite a bit.
Have previously had CM7 and Phiremod running both internally and on an SD card at various times and tried to do a previous version of MIUI on the card using the same process without any luck.
Thanks in advance.

You can use verygreens method here -
http://forum.xda-developers.com/showthread.php?t=1000957
Important part is to rename the miui zip like this -
'How to update to a new build:
put the new build you want to try on the first partition. (the name must be update-cm-*.zip or cm_encore_full*.zip or just update-*.zip)'
..and it should work fine
cheers,

Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Where are/is "My Apps" as I do not seem to be able to find it.
D/L Netflix and it runs just as it should but the soundlevel at max is quite a bit lower than on rooted 1.3.
Free Koi living wallpaper looks beautiful.

My Apps - strangely there isn't one, but this works nicely -
http://forum.xda-developers.com/showthread.php?t=1154299
Sound level - Download nook tweaks from market and change settings in that
Cheers,

What did you rename the MIUI file? I've tried it a couple different ways and checked the MD5's, but keep getting errors. Unless my SD card has been corrupted somehow (I used it for other SD boots before this, so not too likely), I can't think of anything else causing the problem.

Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?

PhoenixClaw said:
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
Click to expand...
Click to collapse
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.

DizzyDen said:
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
Click to expand...
Click to collapse
What kind of information? My nook color originally had the latest CM7 nightly on the sd card. I followed verygreen's method when I installed that. I used the NC normally. Then, I followed this thread and applied verygreen's method. I downloaded the MIUI rom from the miui thread, renamed it like the cm7 nightly zip ("cm_encore_full-253.zip") and put it in the root of the sd card. I put the sd card back in and booted via recovery. It installed and shut down. I turned it on again, and reached the MIUI globe thing. It was looping and stuck there for 30 minutes.

I've been thinking of trying miui.
If anybody has got.it running from SD please give the step-by-step procedure for the rest of us.
Thanks

A search would show you....
http://forum.xda-developers.com/showthread.php?t=1271982&highlight=Miui+sd

I hate to revive a dead thread, but I have been trying everything I could read or download.
I am using the Size-agnostic installer from this thread: http://forum.xda-developers.com/showthread.php?t=1000957
I am trying to flash MIUI 1.9.16 (MIUI.us_encore_1.9.16_Eng_Deo_ZipA_Signed_andmer) (http://goo-inside.me/miui/encore/)
I successfully installed CM7 to this Sandisk Class4 16gig microSD. Every time I try to flash MIUI, I re-burn the size agnostic card image, copy over the cm7-renamed MIUI ROM, and boot.
The installer seems to work, just like my CM7 installs. Then, when I try to reboot, it goes back to the installer (linux penguin at the top, goes through the motions of trying to flash another rom, when not finding anything, it shuts down).
I know I am missing something simple.
Am I to install CM7, then MIUI on top of it (without reburning the card)? Am I just using an SD-incompatible ROM? For those who were successful, where did you download the ROM from?
I know I have lots of questions, I hope you guys see my effort (that I don't just want someone to give me a quick fix), and I thank you in advance for your help.
Kind regards!
harryzee said:
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Click to expand...
Click to collapse

I'm certainly no expert, but I have flashed two different versions of MiUi to micro SD cards adn then worked fine. You do not need to do i over CM7. Like you, I prepared a clean SD and used the size agnostic procedure. I renamed the MiUi file to some that started with update-cm-
I got my MiUi file here:
http://roms.miui.us/
I used a program called SD Formatter to format the card.. then I used the 1.3 version installer. I sometimes had problems using winimage to create this sd card . You have to select the drive letter for the sd card and then use the "restore" choice on the menu.

David, thanks for your response. I had already wiped it and installed CM7, but when I saw your post, I gave MIUI one last try. I downloaded from that site, and BAM, it installed perfectly! Thanks heaps!

Black screen of death

I used ManualNooter for my nook. As I recently installed a bunch of apps and ebooks, I thought I should back up my device. I went to Rom Manager for back up which then brought me to CWM when it was done to reboot. When I reboot it was stuck in boot loop. I turned the nook, then back on and whenever i reboot i get black screen of death. I can boot to CWM by holding all three buttons down. I tried wiping data, factory reset, reinstalling nooter zip, yet every time I reboot, I get black screen of death. Can someone help me figure out how to fix this? Thx.

kellym said:
I used ManualNooter for my nook. As I recently installed a bunch of apps and ebooks, I thought I should back up my device. I went to Rom Manager for back up which then brought me to CWM when it was done to reboot. When I reboot it was stuck in boot loop. I turned the nook, then back on and whenever i reboot i get black screen of death. I can boot to CWM by holding all three buttons down. I tried wiping data, factory reset, reinstalling nooter zip, yet every time I reboot, I get black screen of death. Can someone help me figure out how to fix this? Thx.
Click to expand...
Click to collapse
Go to my NC tips thread linked in my signature and read item A15. That will restore you to stock and you can start over.
Sent from my Nook HD running CM10.1 on SD

leapinlar said:
Go to my NC tips thread linked in my signature and read item A15. That will restore you to stock and you can start over.
Sent from my Nook HD running CM10.1 on SD
Click to expand...
Click to collapse
My computer no longer recognizes the Nook (I have an HP laptop running Windows 8). Prior to the black screen, the computer did detect the nook when plugged in with the USB cable. How can I now copy the zip file to flash through CWM recovery? I have version 3.2.0.1 installed? I don't understand why trying to make a back-up file through the ROM manager would cause such failure? Thanks for your help.
EDIT: Should I now be trying the verygreen method via SD card? Apologies for the panic.

kellym said:
My computer no longer recognizes the Nook (I have an HP laptop running Windows 8). Prior to the black screen, the computer did detect the nook when plugged in with the USB cable. How can I now copy the zip file to flash through CWM recovery? I have version 3.2.0.1 installed? I don't understand why trying to make a back-up file through the ROM manager would cause such failure? Thanks for your help.
EDIT: Should I now be trying the verygreen method via SD card? Apologies for the panic.
Click to expand...
Click to collapse
Make a bootable CWM card as described in my item A10. Then copy the 1.4.3 rom zip downloaded from A15 to the card. Put the card in the Nook, boot to CWM and flash the ROM zip.
Sometimes files get corrupted when writing them to the Nook. Obviously that is what happened with ROM Manager.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
Make a bootable CWM card as described in my item A10. Then copy the 1.4.3 rom zip downloaded from A15 to the card. Put the card in the Nook, boot to CWM and flash the ROM zip.
Sometimes files get corrupted when writing them to the Nook. Obviously that is what happened with ROM Manager.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
What size SD card do I need? I tried copying the 1.4.3 rom zip (unzipped, used 7 zip to extract the other files) onto a 8 GB sandisc and a 16GB and both tell me the card does not have enough space. I've used Win32diskimager-v.07 (the link from manual nooter no longer works), I copied the CWM-5.5.04 image to the SD card. I had no trouble copying manual nooter onto the 8gb sandisc. I used a SD formatter program to format and wipe the disk before using it for this. Thanks.

kellym said:
What size SD card do I need? I tried copying the 1.4.3 rom zip (unzipped, used 7 zip to extract the other files) onto a 8 GB sandisc and a 16GB and both tell me the card does not have enough space. I've used Win32diskimager-v.07 (the link from manual nooter no longer works), I copied the CWM-5.5.04 image to the SD card. I had no trouble copying manual nooter onto the 8gb sandisc. I used a SD formatter program to format and wipe the disk before using it for this. Thanks.
Click to expand...
Click to collapse
I guess I should modify my instructions. The 1.4.3 zip is so large that you need to use the 6.0.1.2 version of the bootable CWM SD. It has a little more room for the zip. It does not matter which size card you start out with.
Sent from my Nook HD+ running CM10 on SD

leapinlar said:
I guess I should modify my instructions. The 1.4.3 zip is so large that you need to use the 6.0.1.2 version of the bootable CWM SD. It has a little more room for the zip. It does not matter which size card you start out with.
Sent from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
I'm back in business! It worked - whew! I had trouble with the 1.4.3 zip, so I used DizzyDen's 1.4.1. I was stuck in boot loop the first time I rebooted, then used the 5-6-7 partition fix zip, reinstalled the 1.4.1 zip and it worked like a charm. I also used the newer version of CWM you advised which was smaller in size, it's all on the 16gb SD card with no issue.
One last question, now that the stock rom is in order, am I safe to flash CM10? I'd prefer not to use manualnooter again as you said in a previous post, CM10 is leaps and bounds above nooter. If you think it's okay to flash, do I have to do the 8 count reset to fully wipe?
Many, many thanks for your clear, detailed instruction and patience!

kellym said:
One last question, now that the stock rom is in order, am I safe to flash CM10? I'd prefer not to use manualnooter again as you said in a previous post, CM10 is leaps and bounds above nooter. If you think it's okay to flash, do I have to do the 8 count reset to fully wipe?
Click to expand...
Click to collapse
Glad you got it working. No, you don't need to reset. Just flash that 567 zip again and flash the CM10 rom. All should be ok.
Sent from my Nook HD+ running CM10 on SD

leapinlar said:
Glad you got it working. No, you don't need to reset. Just flash that 567 zip again and flash the CM10 rom. All should be ok.
Sent from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
When I was last working on this, I had my external hard drive plugged into the computer via the usb port. I was backing up the files that were on my micro sd card, I had a 16gb in my droid bionic, I swapped it with the 8 gb I had in the nook when I couldn't get the older version of CWM on the card. Now when I plug in my external hard drive, all I see are the win32 imaging files on it. I take it, this process formats over everything plugged into a usb port? I've lost all my kids photos and videos, I can cry I'm so mad at myself for letting this happen. I've tried the two laptops we have and I get the same list of files in the folders. I guess this is one of those mistakes you only make once.

Oh no! Yes, burning a card writes over everything. There are some utilities that may let you rescue your old files, but maybe not. I would set it aside till you find out. I think the free MiniTool Partition Wizard has some paid companion products that may help.
Edit: just reread your post. It does not write over everything plugged into the USB. You just made a mistake when you burned once and selected the external drive letter. The same solution applies. Find a disk partition repair utility.
Sent from my Nook HD+ running CM10 on Hybrid SD

Status 7 error
leapinlar said:
Glad you got it working. No, you don't need to reset. Just flash that 567 zip again and flash the CM10 rom. All should be ok.
Sent from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
I finally found the time to do this. I flashed the 567 zip, then went to the CM10 download page for the 414 nightly encore zip. I received two errors:
symlink: some symlinks failed
E:error in /sdcard/cm-10-20130414-NIGHTLY-encore.zip
(Status 7)
Installation aborted.
What does this mean?
Thank you.

kellym said:
I finally found the time to do this. I flashed the 567 zip, then went to the CM10 download page for the 414 nightly encore zip. I received two errors:
symlink: some symlinks failed
E:error in /sdcard/cm-10-20130414-NIGHTLY-encore.zip
(Status 7)
Installation aborted.
What does this mean?
Thank you.
Click to expand...
Click to collapse
I suspect a bad download of the CM zip. Try downloading again.
Sent from my Nook HD+ running CM10 on Hybrid SD

You were right (of course!). I took the 407 zip and it flashed without issue. Very exciting! Thank you!
Sent from my DROID BIONIC using xda app-developers app

leapinlar said:
I suspect a bad download of the CM zip. Try downloading again.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Am I able to copy files to the SD card while it's running CM10? I wanted to copy some pdfs and ebub books to read and when I try to copy to the SD card it says the Nook is not responding or disconnected. I don't think this is a driver issue as I can see the Nook on my computer and can see the files stored either on internal storage or SD. When I'm in CM10 and go to file manager, I can only see what is on the SD card, I can't access any of my files that were on EMMC. That's fine, I have copies of my ebooks saved on my laptop, I just can't figure out how to read them now. Any thoughts?
Thanks.

kellym said:
Am I able to copy files to the SD card while it's running CM10? I wanted to copy some pdfs and ebub books to read and when I try to copy to the SD card it says the Nook is not responding or disconnected. I don't think this is a driver issue as I can see the Nook on my computer and can see the files stored either on internal storage or SD. When I'm in CM10 and go to file manager, I can only see what is on the SD card, I can't access any of my files that were on EMMC. That's fine, I have copies of my ebooks saved on my laptop, I just can't figure out how to read them now. Any thoughts?
Thanks.
Click to expand...
Click to collapse
You need to be a little more specific.
There are two methods to connect to your PC with CM10 using the USB cable, MTP and USB mass storage. They are selectable in settings. Go to settings, storage, menu and USB computer connection. MTP is default and shows the Nook as just devices in Windows Explorer with no drive letters. If you choose USB mass storage, they show as drive letters in Windows explorer. But they do not contain anything until you activate them by touching a button on your Nook. And the button does not show if Android degugging is activated in settings.
So that is why I say you need to be more specific.
You say you can't copy to the SD. What are you seeing on your PC, drive letters or just labels that say internal SD and sdcard? And describe a little more the errors.
The reason you can't see emmc with the file manager that comes with CM10 is by default it is in safe mode. You have to change a setting to get it in root mode. Either get a different file manager like the free Root Browser Lite or change the setting in the CM10 file manager. To change the setting, press menu while it is open and you will see three dots in the lower right. Touch that. Go to settings, general settings and access mode and change it from safe to root. Then you will be able to see emmc.
Sent from my Nook HD+ running CM10 on Hybrid SD

I think my quick reply didn't post. Anyway, thanks, again, for your help. When I went to transfer files from my external hard drive to the Nook, I was using the wrong lap top and then realized I had to update usb drivers which helped. I then followed your other steps to change settings, including safe to root, and I can now see all my files.
Can you recommend a file manager? The default one is a bit cumbersome.
Thanks again for everything.

kellym said:
I think my quick reply didn't post. Anyway, thanks, again, for your help. When I went to transfer files from my external hard drive to the Nook, I was using the wrong lap top and then realized I had to update usb drivers which helped. I then followed your other steps to change settings, including safe to root, and I can now see all my files.
Can you recommend a file manager? The default one is a bit cumbersome.
Thanks again for everything.
Click to expand...
Click to collapse
If you want a free one, I recommend Root Browser Lite. For paid, I like Root Explorer.
Sent from my Nook HD+ running CM10 on Hybrid SD

I'd like to update to the May 4 nightly and new gapps, should I run the 567 partition zip again before flashing? If so, should I wipe cache and dalvik as well? Are you still using ADW launcher? I'm using Nova. Thanks.
Sent from my ME172V using xda app-developers app

kellym said:
I'd like to update to the May 4 nightly and new gapps, should I run the 567 partition zip again before flashing? If so, should I wipe cache and dalvik as well? Are you still using ADW launcher? I'm using Nova. Thanks.
Sent from my ME172V using xda app-developers app
Click to expand...
Click to collapse
The 5/4 nightly is CM10.1. The version you were running earlier was CM10. You should be able to just flash the 5/4 nightly with only wiping the dalvik-cache. No other wiping or partition zips. Since CM10.1 requires a newer gapps (20130301), you should flash that too.
Yes, I still use ADW, but only because I am used to it and do not want to try something new.
Sent from my Nook HD+ running CM10.1 on emmc

Is there any difference in performance running CM10.1 off emmc vs SD card which I'm presently doing with the April 7 nightly? I have some vague idea that I read a while back once you put CM10 on emmc you could no longer return to stock?
If I stay on SD card is there any harm in trying (I think the name is Dean) method to adjust internal partition for more room for apps? I've run out of room on SD card? Or is using Titanium to move files a safer alternative?
My kids are now using the Nook, I won an ASUS tablet from livinginkaos over at the Droidrzr forum. He had a give-away while fundraising for a root exploit bounty for JellyBean which Dan Rosenberg created. Method works using Linux Ubuntu, that forum is awesome. I was singing your praises to them. Android forums have the greatest support! Thx.
Sent from my DROID BIONIC using xda app-developers app

[GUIDE/TOOLS - NOW OBSOLETE] HDplus CM10/10.1 Easy Install Guide for Legacy SD

UPDATE 05/28/13 - Now that verygreen has changed his SD scheme to his new version, this guide should not be used on his ROMs dated 5/27 or newer. Use his new image and follow his new instructions. If you want to see the old instructions click on the Show Content button below.
Click to expand...
Click to collapse
Many users have had difficulty installing the HD+ CM10/10.1 ROMs using the Original/Legacy (verygreen) SD setup (especially Windows users). I have written this guide and have made some tools that should make it easier. No need for ADB or Linux. I have upgraded the CWM (clockworkmod) recovery to version 6.0.2.8 which includes larger fonts, a brighter screen and the ability to use the internal storage for installing zips and performing backups. It also uses verygreen's process from his early4 zip that aligns partitions at 2M. This guide and tools are for the Original/Legacy SD setup by verygreen, not the Hybrid. If you want the Hybrid, go here.
Setting up the SD
Begin by downloading the files you need either with stock or your PC. You will need my updated SD image file, attached below (do not use the early4 image from the verygreen thread), the CM ROM zip you want to install and the gapps zip to match it. Put the last two zips on your internal media sdcard built into the HD+. You can get the HD+ CM10 ROMs here and the HD+ CM10.1 ROMs here. You can get the gapps zips here, 20121011 for CM10 and 20130301 for CM10.1.
Extract the SD image zip and you will have a 117MB .img file. Burn that to your SD with Win32DiskImager in Windows or the dd command in Linux or OSX. The SD needs to be at least 4GB and preferably a SanDisk Class 4.
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first.) If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
When burning is complete, insert the SD into the Nook and boot. It should boot to the cyanoboot logo and sit there for a little while while it creates the other partitions on the SD and formats CM10SDCARD. Then it will end up in CWM for HD+ Original SD. If it does not leave the cyanoboot logo within a reasonable time (it hangs sometimes), just touch the power key and CWM should come up. To use CWM, press the volume up/down keys to move the cursor and the n key to select an item. The power key is the back button.
Installing ROMs
You can use the "install zip from SD/choose zip from internal memory" option to flash the CM ROM you downloaded earlier to your internal memory sdcard. Then you can flash the right version of gapps to match your ROM.
When you reboot (you need to leave the SD in the slot), the CM ROM should start. You will need to register with Google to set up Play Store.
If you later want to upgrade your ROM to another build, download it to your CM10SDCARD partition using CM. Then boot to CWM and flash it.
Backing Up
This version of CWM lets you back up and restore your setup. You can even back up to internal memory. It does not back up /boot, but does back up /system, /data and /cache.
Swapping EMMC and SDCARD
Some users have installed CM to a small SD card and want their apps to use the large internal media storage to store their data. I have developed a couple of zips to swap EMMC and SDCARD when booted to CM so that internal memory is available to your apps to store their files. One zip will add the swap and one will remove it. Get them attached below.
These zips can be flashed with CWM but will only install to the Original SD with CM. I just fixed a bug in the rev0 and rev1 zips. If you already flashed rev0 or rev1, you need to flash the remove zip before you flash the rev2 fixed version. No need to boot in between.
With rev2, both SDCARD and EMMC will show internal media storage, as will both MTP folders. A new folder, ext_sdcard, will show the external SD media partition.
Updating earlier versions of CWM
Updating prior installs of the Original SD installation to this new version of CWM is easy. Just download the ramdisk zip file attached below and extract the file. Put your old SD setup in your PC and rename the ramdisk.cwm to ramdisk.cwm.bak. Then copy the new ramdisk.cwm you just extracted to the card, replacing the version that was there. Next time you boot to CWM, the 6.0.2.8 version for HD+ Original SD will be there.

Change Log
Change Log
05/28/13 - guide is obsolete starting with the 5/27/13 ROM
05/15/13 - removed warning, resolved
04/10/13 - added warning running CM10.1.
03/09/13 - added rev2 of the swap zip, as it failed on CM10.1
03/08/13 - added rev1 of the swap zip to fix a permissions bug.
03/07/13 - retitled thread
03/03/13 - added CM10/10.1 SDswap zips
02/27/13 - Initial posting

OP Updated

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
For hd plus only?
Sent from my BNTV400 using xda app-developers app

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
mrDAXpax said:
For hd plus only?
Sent from my BNTV400 using xda app-developers app
Click to expand...
Click to collapse
Yes, you can use bokbokan's hybrid image to do it the same way for the HD. And I think his standard image does it too.
Sent from my Nook HD+ running CM10 on Hybrid SD

question...
Sorry if this has been answered somewhere else but, I did this using a 32gb card and everything I running smooth. I have a 64gb card that I want to switch it out for. I know it won't be a problem doing the root and all of that again, but I was wondering if anybody knows how to change the 32gb SD card back to normal? When I stick it in my computer all it shows is the boot partition and when I try to format it, it only formats that's partition. Meaning that my 32gb card turns into a worthless 116 mb card. I've tried on windows and Ubuntu and get the same results...
So does anybody have any suggestion?

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
startoxic said:
Sorry if this has been answered somewhere else but, I did this using a 32gb card and everything I running smooth. I have a 64gb card that I want to switch it out for. I know it won't be a problem doing the root and all of that again, but I was wondering if anybody knows how to change the 32gb SD card back to normal? When I stick it in my computer all it shows is the boot partition and when I try to format it, it only formats that's partition. Meaning that my 32gb card turns into a worthless 116 mb card. I've tried on windows and Ubuntu and get the same results...
So does anybody have any suggestion?
Click to expand...
Click to collapse
Yes, use SDFormatter free from the web. It will do it.
Sent from my Nook HD+ running CM10 on Hybrid SD

Thank you, I will try that and let you know how it works

This is probably a stupid question, but once I've got the SD card set up properly, can I then go ahead and delete the ZIP files that I've installed? Or do I need to keep them kicking around? Figure if I can free up some space, I should.

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
stormerider said:
This is probably a stupid question, but once I've got the SD card set up properly, can I then go ahead and delete the ZIP files that I've installed? Or do I need to keep them kicking around? Figure if I can free up some space, I should.
Click to expand...
Click to collapse
You can delete them if you want, but I usually always keep them somewhere so I don't have to redownload them if I need to reflash, which very oftern I have to for various reasons. I can always delete them later if space becomes an issue.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
You can delete them if you want, but I usually always keep them somewhere so I don't have to redownload them if I need to reflash, which very oftern I have to for various reasons. I can always delete them later if space becomes an issue.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
*nod* I meant deleting them off the SD card (should have specified). I'd be keeping them on my fileserver to ensure that I can reflash the sdcard to the same version I started with if I need to.

leapinlar said:
Setting up the SD
Begin by downloading the files you need either with stock or your PC. You will need my updated SD image file, attached below, the CM ROM zip you want to install and the gapps zip to match it. Put the last two zips on your internal media sdcard.
Click to expand...
Click to collapse
I'm confused by this, what are you referring to as "internal media sdcard"? I used win32 to burn the .img file, then booted into CWM...I'm clearly doing this wrong, because after that, the sdcard only has 117mb and no room to put ROMs on

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
KamikazeChris said:
I'm confused by this, what are you referring to as "internal media sdcard"? I used win32 to burn the .img file, then booted into CWM...I'm clearly doing this wrong, because after that, the sdcard only has 117mb and no room to put ROMs on
Click to expand...
Click to collapse
You are doing it right. 117MB is what it is supposed to have. You do not put the files on that card. You put them on the HD+ (on the internal sdcard).
If you could see that it only had 117 MB, you were not booted to CWM, you were looking at the SD while it was still inserted in the PC. Booted to CWM means it is in the Nook.
When you insert the burned SD into the powered off HD+, then turn it on, it boots to CWM. That is what I mean by booting to CWM.
The internal sdcard means the storage that is built into the HD+ (that is why I call it internal). Boot to stock and download the files with it. They get put on the internal sdcard or "sdcard" as it is called. After you insert the burned card into the HD+ and boot to it, CWM has the ability to flash the zips by reading them from the internal sdcard built into the HD+.
Edit: I just clarified that in the OP. It is hard to anticipate how users will interpret your words in advance.
Sent from my Nook HD+ running CM10 on Hybrid SD

i dont seem to understand what file is supposed to amount to about 120mb. i extract "cm-10-20121231-UNOFFICIAL-ovation" and amounts to more than 200mb's but it also replaces other files.

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
droidbot1337 said:
i dont seem to understand what file is supposed to amount to about 120mb. i extract "cm-10-20121231-UNOFFICIAL-ovation" and amounts to more than 200mb's but it also replaces other files.
Click to expand...
Click to collapse
You do not extract the cm zip. You extract the image zip which is attached to the post. It is the one that is 120 MB and is the one you burn to the SD with win32diskimager.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
You do not extract the cm zip. You extract the image zip which is attached to the post. It is the one that is 120 MB and is the one you burn to the SD with win32diskimager.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
thank you for the help. i appreciate it! i can now use my new HD+ (bought it last night) to its full potential.

I just wanted to say that I was suffering from the dreaded "Nook refuses to boot from the SD card" syndrome. I tried three different SD cards burned using four different computers, to no avail. Tried this patch? Worked perfectly. Thanks! :laugh:

SDXC cards viable for this use?
Well, that registration video was a real interesting bit compared to most forums I've ever used. Somebody put a lot of work into that.
I'm noticing a lot of emphasis on Class 4 cards. Impetuous sort that I am, I already obtained a Sandisk Ultra 64 GB microSDXC (Class 10/UHS 1) card for this project. Best Buy had a good deal and I was hoping to have a lot of room to work with and it wasn't clear what access to the internal storage would be available or best left alone. Has anyone had success or great problems with this card?
Other than that issue before attempting to execute the install, this is a very helpful thread. Much clearer than verygreen's original. That shouldn't be taken as an insult to verygreen as technical writing for those outside a project is not a skill everyone has or should have. Asking those deep within a project to shift mental gears to operate at the outsider's level can be a waste of resources and is often better delegated to a specialist. And we should be thankful for those specialists when they volunteer like this.

Epobirs said:
I'm noticing a lot of emphasis on Class 4 cards. Impetuous sort that I am, I already obtained a Sandisk Ultra 64 GB microSDXC (Class 10/UHS 1) card for this project. Best Buy had a good deal and I was hoping to have a lot of room to work with and it wasn't clear what access to the internal storage would be available or best left alone. Has anyone had success or great problems with this card?
Click to expand...
Click to collapse
Some have had good success with that card, especially if they use my Hybrid setup which uses less of the SD to operate from.

leapinlar said:
Some have had good success with that card, especially if they use my Hybrid setup which uses less of the SD to operate from.
Click to expand...
Click to collapse
It appears to be working on the first try. I'm currently syncing my app set from the Play store. It looks like this will be a huge value add for the Nook. I wouldn't have bought it if the full Android option weren't there. I just hope enough of us still buy books from B&N to keep them going.
Thanks.

[Q] TWRP flash on EMMC or SD

I have searched the forums, google, and youtube tutorials and I am unable to find any answer on this.
When using TWRP, does it flash to the SD card or the internal storage (EMMC). I see options to mount them, but no definitive of where they will actually be flashed to.
Thanks in advance,
- Matt

mattpker said:
I have searched the forums, google, and youtube tutorials and I am unable to find any answer on this.
When using TWRP, does it flash to the SD card or the internal storage (EMMC). I see options to mount them, but no definitive of where they will actually be flashed to.
Thanks in advance,
- Matt
Click to expand...
Click to collapse
TWRP flashes to emmc. SD installs do not use TWRP or CWM to install ROMs.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
TWRP flashes to emmc. SD installs do not use TWRP or CWM to install ROMs.
Click to expand...
Click to collapse
So I currently have a size agnostic cm7 sd install from a year or so back. I lost my SD card reader so I cannot redo it so I can install cm10.1.
I found that with the goo.im app I can install TWRP and then download and upgrade my rom/gapps. So if I continue on this way, it will write the changes to the EMMC, thus not needing my SD card anymore? (I am okay with this, just want to verify what exactly will happen.)

mattpker said:
So I currently have a size agnostic cm7 sd install from a year or so back. I lost my SD card reader so I cannot redo it so I can install cm10.1.
I found that with the goo.im app I can install TWRP and then download and upgrade my rom/gapps. So if I continue on this way, it will write the changes to the EMMC, thus not needing my SD card anymore? (I am okay with this, just want to verify what exactly will happen.)
Click to expand...
Click to collapse
Yes, it will install the ROM to emmc.
Sent from my Galaxy Tab 2 using XDA Premium

leapinlar said:
Yes, it will install the ROM to emmc.
Click to expand...
Click to collapse
Thank you for the help, all went well! Loving cm10.1 so far.

Steps I took to get KitKat on my New Nook HD+

Bought a brand new Nook HD+ with the intention of using it as an inexpensive tablet in my kitchen, primarily to access the web and run cooking apps. Out of the box, I found it laggy and unresponsive to the point of being unusable.
I have some experience rooting/jailbreaking my phones, very little experience with tablets. I was eager to get KitKat on the device right away—it has proven to be so much better on my phone, much better battery life, much more responsive, less buggy, more fluid, etc. Problem is, KitKat is bleeding edge, and there are no official builds, and most of the install guides for dummies (=me) refer to earlier (JB) versions of Android.
It turned out to be quite time consuming to read all of the different versions of the install process, and to patch together a process that worked. I thought I would document what I did, in order to (possibly) save others some of the time that I invested.
Note: this process does NOT install KitKat to the SD card. In plain English, these steps install a bootable recovery image onto a micro sd card. Booting into the micro-sd recovery will allow you to wipe stock from your device and install kit-kat, google apps and an internal recovery. When you are finished, you remove the micro-SD and you have an Android tablet that boots into kitkat. If you want something different stop reading!
1) get a class 4 micro SD (class 4 seems to be the one that boots most reliably in the Nook HD+ (see this thread: http://forum.xda-developers.com/showthread.php?t=2288688&page=12 )
2) Download win32diskimager (http://sourceforge.net/projects/win32diskimager/?source=directory ) and this bootable CWM recovery image (http://nook.rootshell.ru/hd/emmc-cwm-early3.img.gz ).
3) Extract the CWM recovery image, and use win32diskimager to write the image to the micro sd.
4) Download EMMC (internal) recovery image and latest CM11 EMMC from this thread (http://forum.xda-developers.com/showthread.php?t=2600572) . You want “Ovation Recovery Image (CWM)” and “cm-11-xxxxxxx-UNOFFICIAL-ovation-emmc.zip.” All recoveries and roms for this device are called Ovation. Download Paranoid Android Google Apps from this thread (http://forum.xda-developers.com/showthread.php?t=2397942 ). MAKE SURE the version you download is for Android 4.4.x. It will say 4.4.x in the file name. I chose the Google Stock Package. (PA-Google Apps will allow you to enable ART if you want to.)
5) Turn on the Nook HD+, register it, and download all the system/firmware updates until the Google Play Store installs on your device (Google Play and Gmail etc. just recently got added to the Nook, so probably aren’t installed out of the box).
6) Transfer the three zip files (recovery image, CM11 and PA Gapps) you downloaded in step 4 onto the internal sdcard of the Nook itself. (This step is IMPORTANT: the current bootable version of CWM can ONLY read files on the internal SD, so you won’t be able to flash any roms or apps or recoveries unless they are actually on the device) I was unable to use the USB cable to transfer the files directly to the Nook from my computer—others have also had trouble getting Windows to recognize the Nook HD+ properly— and I didn’t want to spend a lot of time figuring it out, so I used the micro sd card as follows. If you can transfer directly from the computer, skip to step 7.
6a) Copy the new internal recovery, new system image and PA Google Apps from your computer to the micro SD card. Eject micro SD from computer.
6b) On the Nook, use Play Store to install a file explorer. I use Root Explorer: https://play.google.com/store/apps/details?id=com.speedsoftware.rootexplorer&hl=en . You don’t need root to copy files from external to internal SD (and you don’t have root at the moment) so you can download any file explorer you like.
6c) Insert micro SD in the Nook while the Nook is still booted/on. The nook will flash a message saying that it’s mounting the SD card. Once it does, use the file explorer to copy all zip files downloaded in step 4 from the EXTERNAL to the INTERNAL SD. The internal SD card is referred to as “sdcard” or “sdcard0” and the external SD as “ext_sdcard” or “sdcard1”.
7)Turn off nook.
8) Insert micro SD card if it isn’t in already, and turn on the device. You should see the "Nook" logo, which gets overwritten by the "cyanoboot" logo. Keep waiting. It will eventually go into CWM. If it doesn’t, go back and start reading through the thread referenced in step 1. With any luck, you won’t have trouble. I had boatloads of trouble booting from the SD card until I got a class 4 micro SD, and used the bootable image linked in step 2. Since then I can boot every time.
9) Use CWM to backup stock rom, then wipe data/factory reset. (Very good instructions on using CWM here: http://forum.xda-developers.com/showthread.php?t=2317500 ) Flash the internal recovery. Flash the CM11 Rom. Flash PA Google apps. Remove micro SD. Select “Reboot System now”.
10) When you reboot, go to Settings/About tablet/Build number. Tap on that seven times to enable developer options. Go to Settings/Developer Options and select Advanced Reboot which allows rebooting into recovery from the power button.
11) OPTIONAL: Enable ART. ART is not compatible with all applications, so you might experience problems. You can see which applications work and don’t work here: http://www.androidruntime.com/. Enabling it made a very big difference for me in terms of smoothness; others with more experience seem to achieve similar, or better effects by modding with xposed, gravitybox, etc. See: http://forum.xda-developers.com/showthread.php?t=2579945&highlight=change+and+resolution&page=24) To read more about ART and what it does see: http://www.androidpolice.com/2013/1...-in-secret-for-over-2-years-debuts-in-kitkat/. If you decide to give it a try: Settings/Developer Options/ Select Runtime/Use ART.
12) Reboot—this time will take a while because ART (if you enable it) has to reconfigure itself.
For me, the difference is night and day. I now have a tablet that runs beautifully. Many many thanks to the hard working developers who make this possible, especially Verygreen, who provided the rom and recovery, and e.mote who wrote the "for dummies" thread that helped this dummy make it through the process.
Please comment and change anything that I have garbled. My goal is to consolidate information, not mangle it!

Very good post
Thanks for the excellent post. :good:

I was running 4.4.2 different versions on emmc and sd card.
10.2 nightly is still the best for me!
Performance and battery wise.

Hi I installed the same rom over Carbon rom. I went to format my sd card and every time iI tried the Nook would reboot. I went into CWM recovery and formatted it from there but I think it formatted the internal sdcard, Could someone check this out for me as this is my first post I cant post on the developer forum. TIA Mike

Not sure what you exactly what you mean, but it sounds like you were trying to format your external SD card from inside your nook? If you write the CWM bootable image to your external SD using Win32Diskmanager you don't need to format it. Writing the image will erase everything already on the external sdcard. You should be able to boot from it and install the zips. Is your problem that you can't boot from the external SD, or that you erased the zips from your internal sdcard?
Go back and read over verygreen's thread referenced in step 4-- I think he may have posted an updated version of CWM that can read the external sd card. Otherwise:
Did you make a backup of your carbon rom install? If so, you could write a bootable (earlier) version of cwm to the external sdcard, copy your backup to the sdcard and restore it, and then start over. (or not, as some people seem to think Carbon rom is just as good-- I never tried it) The thread in step 9 has great instructions that might help with that.
This thread (http://forum.xda-developers.com/showthread.php?t=2579945 ) is about installing a different version of cm11, and it's in a non-developer forum, where we can post. You might find answers there.

se1961 said:
Not sure what you exactly what you mean, but it sounds like you were trying to format your external SD card from inside your nook? If you write the CWM bootable image to your external SD using Win32Diskmanager you don't need to format it. Writing the image will erase everything already on the external sdcard. You should be able to boot from it and install the zips. Is your problem that you can't boot from the external SD, or that you erased the zips from your internal sdcard?
Go back and read over verygreen's thread referenced in step 4-- I think he may have posted an updated version of CWM that can read the external sd card. Otherwise:
Did you make a backup of your carbon rom install? If so, you could write a bootable (earlier) version of cwm to the external sdcard, copy your backup to the sdcard and restore it, and then start over. (or not, as some people seem to think Carbon rom is just as good-- I never tried it) The thread in step 9 has great instructions that might help with that.
This thread (http://forum.xda-developers.com/showthread.php?t=2579945 ) is about installing a different version of cm11, and it's in a non-developer forum, where we can post. You might find answers there.
Click to expand...
Click to collapse
Sorry I didn't explain very well, I installed verygreens KK rom succesfully and wanted to do a backup of it. I put in a SD card and thought I would format it as it had some old junk on there. When I tried to format through the settings section the tablet would just reboot. So I booted into evergreens CWM recovery and tried through there, it formatted something but my external card cannot be read. And some of my settings have been lost, some time ago I used 4. Swapping "sdcard" and "ext_sdcard" from this post http://forum.xda-developers.com/showthread.php?t=2062613. So I think that may be my problem. I have back ups so no problem.

mikemelbrooks said:
some time ago I used 4. Swapping "sdcard" and "ext_sdcard" from this post http://forum.xda-developers.com/showthread.php?t=2062613. So I think that may be my problem.
Click to expand...
Click to collapse
Ah! I thought from your first post that you were quite new to this process, but clearly you are ahead of me on this one. Good luck.

Update: installed the latest build which has the touch screen patch. It's PHENOMENAL. Truthfully, the only thing I need this tablet for is using a website that involves a lot of dragging and dropping. I had to train myself not to accidentally zoom and/or copy. No more! I haven't even enabled ART this time because it's working so well. I would have posted on Verygreen's thread to thank but don't have enough posts.
Sent from my BN NookHD+ using xda app-developers app

Back to stock
Great post i want to try this but am wondering is it possible to go back to stock after doing this, i installed clockworkmod before so i have a backup of my original nook before i installed anything.

RADZ1973 said:
Great post i want to try this but am wondering is it possible to go back to stock after doing this, i installed clockworkmod before so i have a backup of my original nook before i installed anything.
Click to expand...
Click to collapse
Yes, just restore your backup.
And BTW, never fully quote a long opening post like that. It just wastes bandwidth and we have to scroll through all that to see your comment or question.
Sent from my SCH-i705 using XDA Premium 4 mobile app

Respond
Sorry about the quote , thank for the info though cos i wasnt sure i could go back to stock. I have just followed this tutorial and all is well, this is good because my Moto g just got this update so im in sync .

RADZ1973 said:
Sorry about the quote
Click to expand...
Click to collapse
You can actually go back and edit out that quote.
Sent from my SCH-i705 using XDA Premium 4 mobile app

kokercey said:
Thanks for the excellent post. :good:
Click to expand...
Click to collapse
Next time, no need to quote the full post.

Nook for Android?
This works very nicely. But Nook for Android won't install. Are there properties I can change to allow Nook for Android to install on this 'new' Nook device?
rogerlig

Great tutorial.
I would suggest around your step 9, after you have made a backup with CWM, before you wipe data/factory reset:
Remove microSD. Reboot into stock Nook and connect to computer. Copy off the backup from clockworkmod folder to your computer. Then boot again with the microSD, and proceed to wipe and flash.
Otherwise, the backup may get wiped.

rogerlig said:
This works very nicely. But Nook for Android won't install. Are there properties I can change to allow Nook for Android to install on this 'new' Nook device?
rogerlig
Click to expand...
Click to collapse
You must get the nook for android app from someplace other than Play Store, like 1mobile.com.
Sent from my BN NookHD+ using XDA Premium HD app

I got everything running, but my HD+ is running extremely laggy. I did a full wipe, but my internal SD card is still a little over 7 gigs full. Is there something else I missed? The Nook reader is particularly slow.

liukuei said:
I got everything running, but my HD+ is running extremely laggy. I did a full wipe, but my internal SD card is still a little over 7 gigs full. Is there something else I missed? The Nook reader is particularly slow.
Click to expand...
Click to collapse
Yes, a full wipe (factory reset) did not remove your previous media files. To do so you need to boot to CWM and go to mounts and storage and format 'data and datamedia'. That clears out previous files and should improve performance.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Yes, a full wipe (factory reset) did not remove your previous media files. To do so you need to boot to CWM and go to mounts and storage and format 'data and datamedia'. That clears out previous files and should improve performance.
Thanks. Will I need to reflash CM 11 after?
Click to expand...
Click to collapse

liukuei said:
leapinlar said:
Yes, a full wipe (factory reset) did not remove your previous media files. To do so you need to boot to CWM and go to mounts and storage and format 'data and datamedia'. That clears out previous files and should improve performance.
Thanks. Will I need to reflash CM 11 after?
Click to expand...
Click to collapse
no if it successfully flashed last time, you just need to reset-up your accounts and install apps again.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse