I bought a Xoom 3 days ago and rooted. Installed CWM. This is my second Android device. My question is this. I was looking for the sdcard2 folder, as I had though i had seen it once before. After installing CWM I don't see it. I used the 1 click root + kernel method. Am i missing it, or do I need to take a few more steps?
Related
I bought a Xoom 3 days ago and rooted. Installed CWM. This is my second Android device. My question is this. I was looking for the sdcard2 folder, as I had though i had seen it once before. After installing CWM I don't see it. I used the 1 click root + kernel method. Am i missing it, or do I need to take a few more steps?
Look for a folder labeled external that should be your micro sd. It was changed in the newest kernal update.
Sent from my Xoom using Tapatalk
Sd card update hasn't came out yet?
I have no such folder in my root file system. CWM also says there is no SD card.
OK, so I looked at my kernel version and it shows an old version without SD Support. *face palm* I'll update my kernel and try again.
the one click root is only 1.3.0. make sure you flash 1.4.0 before you flash 1.4.1 in CWM.
good luck!
First of all, really big KUDOS MUCHACHOS to the CM7 Dev guys! I had already donated a pretty hefty amount due to using CM7 so much on my Evo but I donated again cuz this is awesome! I do have a couple of questions tho, which I can't fine answers to. I did search for them but really had no luck. The NC community is not yet as organized as the EVO one, I am getting conflicting information and in general having a really ***** of a time finding anything so sorry if some of this has been answered(Im sure that's likely the case at least for some of them).
I used the size-agnostic SD card thing to make the SD Card i had into a CM7 install. Running the latest stable(as of 2 days ago). But thing of moving it all to internal memory. So here are my questions.
1: If I do this, will I be able to still access the real NC OS that shipped with the device? The Nook for Android app sucks, it won't play several of the books I already got(says they are invalid format when I try to DL them) so it is imperative to me that I keep access to the NC OS i have now(but I wouldn't care if it were on the SD card as long as it worked for reading books).
2: What will CM7 be like if I do this? I am gonna assume it won't take so long to boot anymore? Will it basically be a giant phone? Full access to the SD card? Still able to use the internal memory as storage(I use it to store music now)? Work exactly like my Evo does now? Except that it won't make calls of course.
3: Rooting. It seems that so many people are running CM7 that the guides/walkthroughs on rooting are hard to find. So a simple question or two pls Which method should I use? What, if any, are the drawbacks? I would still run CM7 most of the time but while in NC OS to read or something it would be nice to have access to android market etc as long as it wont effect my install of CM7.
4: CM7 nightlies. Can I run them from the SD card as well? If so can I just flash them right over my current SD card install without losing everything?
5: Can i run the OC Kernal while running CM7 from the SD card or do I have to run on Internal Memory for that to be possible?
Thanks for taking the time to read this pls answer any questions that you can I'd appreciate it so much!
robertroland said:
First of all, really big KUDOS MUCHACHOS to the CM7 Dev guys! I had already donated a pretty hefty amount due to using CM7 so much on my Evo but I donated again cuz this is awesome! I do have a couple of questions tho, which I can't fine answers to. I did search for them but really had no luck. The NC community is not yet as organized as the EVO one, I am getting conflicting information and in general having a really ***** of a time finding anything so sorry if some of this has been answered(Im sure that's likely the case at least for some of them).
I used the size-agnostic SD card thing to make the SD Card i had into a CM7 install. Running the latest stable(as of 2 days ago). But thing of moving it all to internal memory. So here are my questions.
1: If I do this, will I be able to still access the real NC OS that shipped with the device? The Nook for Android app sucks, it won't play several of the books I already got(says they are invalid format when I try to DL them) so it is imperative to me that I keep access to the NC OS i have now(but I wouldn't care if it were on the SD card as long as it worked for reading books).
2: What will CM7 be like if I do this? I am gonna assume it won't take so long to boot anymore? Will it basically be a giant phone? Full access to the SD card? Still able to use the internal memory as storage(I use it to store music now)? Work exactly like my Evo does now? Except that it won't make calls of course.
3: Rooting. It seems that so many people are running CM7 that the guides/walkthroughs on rooting are hard to find. So a simple question or two pls Which method should I use? What, if any, are the drawbacks? I would still run CM7 most of the time but while in NC OS to read or something it would be nice to have access to android market etc as long as it wont effect my install of CM7.
4: CM7 nightlies. Can I run them from the SD card as well? If so can I just flash them right over my current SD card install without losing everything?
5: Can i run the OC Kernal while running CM7 from the SD card or do I have to run on Internal Memory for that to be possible?
Thanks for taking the time to read this pls answer any questions that you can I'd appreciate it so much!
Click to expand...
Click to collapse
I'll answer what I can.
1: Nope, stock ROM is replaced when you install CM7 to emmc. No way around it.
2: I'll have to defer on this one, I've always run from SD card. BTW, you are running from a class 2 card, right? The "faster" cards have serious issues.
3: My understanding is that you have to use ManualNooter for B&N 1.2. I haven't gotten around to rooting it since I upgraded to 1.2, but it was painless on the earlier ROM. There were no drawbacks, besides the fact that it's not CM7. ;-)
4: Yup, they just flash right over just as long as your following verygreen's instructions.
5: Yup, OC from SD works fine.
I don't know the specs on my SD card, it's whatever came with my EVO. I upgraded to a 32gb on the EVO so I used the old one for the Nook. My Evo is only a couple months old if that helps ya.
I just picked up this tab yesterday, like many others, due to the Staples coupon.
I've updated to 3.1, rooted using Iconiaroot, and have installed CWR using Acer Recovery App.
My question is this:
Is it possible to install custom ROMs or Kernels from the internal storage, or do I HAVE to used an SD card? I don't have any lying around, and I don't have much use for one, other than installing custom ROMs, if necessary.
I looked through the CWR menus but didn't see anything about installing from storage, only SD card. Did I miss something?
staveandor said:
I just picked up this tab yesterday, like many others, due to the Staples coupon.
I've updated to 3.1, rooted using Iconiaroot, and have installed CWR using Acer Recovery App.
My question is this:
Is it possible to install custom ROMs or Kernels from the internal storage, or do I HAVE to used an SD card? I don't have any lying around, and I don't have much use for one, other than installing custom ROMs, if necessary.
I looked through the CWR menus but didn't see anything about installing from storage, only SD card. Did I miss something?
Click to expand...
Click to collapse
You didn't miss anything, but a 2Gb micro sd card costs next to nothing these days, go pick one up at your closest Walmart, Target, etc.
you probably have a smartphone or a phone not too old... have a minisdcard inside no ?
since you just need it for few seconds...
else you need to buy one...
I plan to get a 32GB so I will be able to put all pictures I take with my camera, on the sdcard without any computer...
I believe cwm has the option to install from wherever you want.
CWM will also allow you to install from a USB thumb drive exactly the same as it would from a MicroSD. Put your files to USB thumb drive, boot into CWM recovery and select install zip as usual and it will see the files on the USB thumb drive and allow you to select which one to install.
I use this option rather than pulling my SD card in and out all the time.. I am on my second tablet already following a faulty sd slot.
Best tip I have read today.
New here, yes I did look around. Found lots of other good info, but not this. If I missed it, feel free to remove my man card. I just got a nook color for x-mas yay me. I have followed two guides:
Well I tried to post two links but that wont work. I understand. Anyway, one guide is called How to Install CyanogenMod 7 on the Nook Color (PC Version), found it on Youtube. Other is called How to: Root a Nook Color, install CyanogenMod 7, and overclock it off of icrontic.com Hope that helps.
I am using at 8gb version to write to SD card. I copy both files over without un-ziping them. Follow all directions. However nook will not boot into Cyanogen. I just get the normal nook boot up. I have tried several times. I am new to the whole rooting thing and have seen people post different versions of the same file. Not sure if that has anything to do with it.
Lastly,
Nook firmware: 1.3
Not using a Scan Disk SD card.
I assume you want to enjoy the beauty of CM7.
Before guiding you, a very first basic question needs to be asked: do you want/intend to run CM7 on eMMC or off the uSD?
I assume you want to enjoy the beauty of CM7.
Before guiding you, a very first basic question needs to be asked: do you want/intend to run CM7 on eMMC or off the uSD?
Well I didn't know there were other options other than CM7. I have also been told that is one is the best all around one out there. You will have to excuse my ignorance but what is eMMC and uSD?
Don't worry, we all learn something day to day.
CM7 is a custom ROM (or OS if you want to call it), which replaced the stock OS by many of us. It is one of the most used ROM out there for NC (short cut for NOOKcolor)
In order to run/use CM7 on the NC, there are 2 choices:
1. Installing and running it (CM7) from the internal memory (a.k.a. eMMC) or
2. Booting and running it (CM7) from the external uSD card
You can spend the whole day searching for the difference in details, here, I just give you some quick thinking of the 2.
Running from eMMC = more complicate installation process, smooth performance, a lot less FC's (Force Close = applications hung), easy to backup, more storage. But you will void the B&N warranty since you delete their original stock OS.
Booting off uSD is a quick way to explore the beauty of CM7 or any custom ROM WITHOUT effecting the stock OS, meaning still under warranty. Down side is you need to have a 8GB or 16GB Sandisk class 4, which probably costs about $20 (onsale for 16GB).
Ok does it have to be a Scandisk sd card? I thought loading CM7 via SD card removed the warranty also. A side question I have. I saw on youtube someone was able to "dual boot" the nook OS with the CM7 OS. They could swap back and forth, any idea what this is about? Sorry I don't have much more information on it than that.
If loading through SD card does not void warranty I would prefer that for the time being until I get the hang of this stuff more. Then again a fully rooted nook is basically a android tablet+nook. The only reason I would want the warranty is if something inside were to break.
Would the reason why my attempt didn't work be related to the fact that I didn't have a Scandisk SD card?
K9Shep said:
Ok does it have to be a Scandisk sd card?
Click to expand...
Click to collapse
No, it does not have to be a Sandisk but Sandisk (class 4) is the best (have been tested) on the market. You can use any other brands, it might work and might not. Therefore, if you intend to run CM7 off uSD, Sandisk is strongly RECOMMENDED. If you use the uSD as an additional storage, any brand is OK.
I thought loading CM7 via SD card removed the warranty also.
Click to expand...
Click to collapse
No, it does not. Running off uSD has zero effect on stock OS.
A side question I have. I saw on youtube someone was able to "dual boot" the nook OS with the CM7 OS. They could swap back and forth, any idea what this is about? Sorry I don't have much more information on it than that.
Click to expand...
Click to collapse
A lot of people mistype or mis-use the term "dual-boot"
AFAIK, there is 2 kinds of "dual-boot" (one of them is incorrectedly used)
a. Leaving stock OS on eMMC and booting CM7 off uSD.
b. Installing 2 different ROMs on eMMC.
I personally choose to say b. should be called "dual-boot", not a. but a lot of people calling a. as "dual-boot". I don't mind.
What your question is for item a.
All you have to do is during powering up, press and hold the "N" button then select booting Normal, it will boot into whatever on the eMMC (i.e. stock OS) even having CM7 uSD plugged in.
If loading through SD card does not void warranty I would prefer that for the time being until I get the hang of this stuff more. Then again a fully rooted nook is basically a android tablet+nook. The only reason I would want the warranty is if something inside were to break.
Click to expand...
Click to collapse
A very good choice. Go for it.
Note: recommend getting the Sandisk class 4.
Would the reason why my attempt didn't work be related to the fact that I didn't have a Scandisk SD card?
Click to expand...
Click to collapse
I don't know what you're doing so can't say.
What have you done?
Ok sorry it took me a little bit to get back to you guys. I work the night shift so it can be a pain and make you seem like a ghost.
So I downloaded a file called 8gb_clockwork-0.7. Used a program called Win32 Diskmanager to write that file to the SD card. I have an 8gb SD card. Not Scandisk.
I then copied over two file that are .zip files. I did not un-zip them. Files are gapps-gb-20110307-signed and update-cm-7.0.3-encore-signed.
I am using my phone as a micro SD card reader. Could that be causing issues?
Everything I read said to do what I just said/did. I then pop in the SD card into the nook. My nook then boots up normally, I.E. standard nook OS.
Any help would be greatly appreciated, thank you.
Again, it goes back to my question in post #2.
Before getting an answer from you, I cannot provide any more help.
In fact, I don't want to guide you through the wrong direction.
I would like to run it off of the USB drive until I get familiar with it. Just in case I do not like it. As this is my first time rooting something I would like to keep my options open.
K9Shep said:
I would like to run it off of the USB drive until I get familiar with it. Just in case I do not like it. As this is my first time rooting something I would like to keep my options open.
Click to expand...
Click to collapse
I assume you meant to run CM7 off uSD (you said USB drive???)
Anyway, if that's the case, what you have done was incorrect.
Forget about it, start over again.
With your not Sandisk uSD card, I wouldn't recommend but if you have to use it, then go with it for now.
1. download "win32diskimager" (I hope you already it)
2. download the "Size-agnostic SD" v1.3 imager from this link: http://forum.xda-developers.com/showthread.php?t=1000957
3. try this ROM (build 12122011) as many others like it from this link: http://forum.xda-developers.com/showthread.php?t=1344873
4. download this GApp (20110828) for CM7 from this link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
5. try to follow verygreen's instructions from the link that I posted in step 2.
If you not able to or hitting issue, get back here for more help
Will do. Thanks again for all the help. Also yes I did mean uSD :/ I will try this Wednesday during the day and get back to you as I am about to start another shift.
So i just got a nook color from someone who was selling it at work. It is factory with 1.4.2. All i want to do is install CM10. But i am kind of confused with all the different instructions in these Forums. I didnt buy an sdcard yet for this device so im pulling my sdcard out of my Galaxy note 2 backing it up and formatting it so i can root the nook. So here are my questions.
1.) Is manual nooter the only way to root 1.4.2?
2.) Once rooted can i simply download/install twrp and install CM10 then remove the sdcard and not use it again or must the sdcard always be there to boot up the device into CM10?
3.) if the above can be done what thread gives the best directions on how to do the above.
Sorry for being a nook noob. Give me a Samsung device and i will root and rom that thing with my eyes shut. But with this nook im feeling humbled lol
DroidXcon said:
So i just got a nook color from someone who was selling it at work. It is factory with 1.4.2. All i want to do is install CM10. But i am kind of confused with all the different instructions in these Forums. I didnt buy an sdcard yet for this device so im pulling my sdcard out of my Galaxy note 2 backing it up and formatting it so i can root the nook. So here are my questions.
1.) Is manual nooter the only way to root 1.4.2?
2.) Once rooted can i simply download/install twrp and install CM10 then remove the sdcard and not use it again or must the sdcard always be there to boot up the device into CM10?
3.) if the above can be done what thread gives the best directions on how to do the above.
Sorry for being a nook noob. Give me a Samsung device and i will root and rom that thing with my eyes shut. But with this nook im feeling humbled lol
Click to expand...
Click to collapse
If you are going to put CM10 on your internal memory, you do not have to root your stock 1.4.2. Just follow eyeballer's guide, here:
http://forum.xda-developers.com/showthread.php?p=12797652
And you do not really have to have an SD card in the slot, but many apps expect one and won't run without one, so it is a good idea to get one. If you really don't want one, there is a tweak you can do to fool the apps into using your internal media storage as an sdcard.
Sent from my HD+ running CM10 on SD with XDA Premium