Database Users

Can't connect to Active Sync

:roll:
My Mini XDA can't connect to my PC via USB cable anymore, it can only recharge the battery.
My iPaq connects flawlessly, so it's not my PC.
Any suggestion ???

Mine does not connect after been run even a little bit. However if I do a soft reset and connect to the usb cable it seems to hook up right away. Whe I first got it it did not have any problems like this and I would like to fix it if possible.

EXEC Not recognised via USB

I get a rather frustrating mesaage when I connect my O2 Exec via the USB port. It takes about 3 time before the connection with the comp finally happen.
The message is - 'USB Device not recognised' ' One of the USB devices has malfunctioned ........'.
Does anybody else have this problem and can anybody help?

Yep
I get the same problem but only with one PC. It happens on either USB port and is not helped by adding a USB hub. As such i am investigating the problem as if it is PC based.

Is this with ActiveSync or CardExport? Either way try rebooting PC first, wait for it to finish loading Windows. Power off your Universal, connect cable to Universal and PC then power on Universal. Seems to work okay for me. If you are using CardExport, remember you can't change modes while connected.
Regards

I have an O2 xda mini and that connects first time every time.
Found it strange that the Exec did not do same!

I have this on one PC - make sure the XDA is turned off first. Then plug the USB cable in and it should power up by itself and get recognised by the PC.
Also make sure you are using the very latest ActivSync (4.1 I believe).

Thanks lads - connect the cable while the Exec was off and it cobnnects first time. Good stuff!!
Why is that?

I think its the phone not the pc that is at fault, as i had a usb car charger and a usb power charger, both using a standard usb lead and the same fault applies, obviously just charging, AS wouldnt happen would it lol.
me missus just got a wizard and none of these faults occur on it

I concur that the plugging in USB while Uni is switched off is much more successful. Can I check with you guys - can you activesync by USB while bluetooth is on? I've not been successful with that.
V

[Q] I cant connect ny hd2 on my computer

Hi im new here
I got my hd2 when it first came out running winmo 6.5 now i just cant connect it to the computer tried more than 1 computer and more than one cable when i connect it only charges i receive nothing on the computer like i used to before i have tried everything in the setting usb to pc still same thing
please help me how can i connect it
and i also tried hard resetting it more than once same thing

under settings tab -----other , there will be a usb to pc button

I bet you have tried all setting changes so since you have done a hard reset and it still doesnt work, it has to be your micro USB cable. I had the exact same problem as yours and i feared that it was the micro USB port that was faulty. But then i tried a different micro USB cable and it works perfectly. Hence, it is likely to be your cable. Im not bad mouthing HTC because of the amazing work they have done, but their accesories seem to be a bit down on quality. My original micro USB cable is now frayed and almost severed, my Touch HD micro USB is also frayed and the original earpiece is now experiencing audio balance issues.

the thing is the cable that comes with the hd2 i lost it but when i was using it i could connect
but now im using nexus one cable and Nokia n900 cable to connect to the computer and it just charges like i said nothing appears

Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck

If your HD2's USB port doesn't work you can connect to ActiveSync via bluetooth. I do that very often for a quick synchronization, and since HD2 has an Activesync profile it's easy to configure...
Anyway, check that "accept USB connections" option is selected in your pc ActiveSync configuration.

Most probably, he's facing the da** usb port breaking issue.

kawshigan said:
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
Click to expand...
Click to collapse
from where can i download windows mobile device after uninstalling it?

You will find it here.

Thanks for everyone who hellped it turned out nothing was wrong with my hd2 cause i tried connecting my cousins hd2 using the cable i use it didnt work
turned out i must connect the original hd2 cable

for advanced android user

hey all
am connecting my htc sensation 4g.. with my laptop vie usb by intenet pass-through .. and am connecting my lap with 3g usb connector
and am sharing it with my phone ... my problem is I don't want 2 keep stick with my laptop via usb cable .. i want 2 connect wirelessly
means that I want to connect my phone via wireless with my 3g usb connector that am using with my lap ...
I hope to solve this soon

I hope I read that right but have you tried any of the wireless tethering apps? Which carrier do you have and which phone and ROM?

Just stick the SIM card of the 3G dongle in your phone. No need for the laptop.

Foxfi/ Pdanet

My wife has a Galaxy S5 with Foxfi purchased. I can use it on one computer and its fine. She tries to connect it to hers and it wont stay connected. I am using the cable that came with it and connecting to a usb 3.0 port. Any ideas what setting maybe different from on computer to the next? Hers is a Toshiba Satellite U840. I have a LG G2 I just tried and it works for a minute or two and then loses connection. Doesnt matter what usb port its connected to and I tried to look at all power settings on laptop.