Database Users

[Q] How to install minicm

Sorry for the very noob question but i can't make everything work.
I've 2.0.1 and I'd like to install http://forum.xda-developers.com/showthread.php?t=964223
what have i to do? the various tutorials haven't helped me

Siso93 said:
Sorry for the very noob question but i can't make everything work.
I've 2.0.1 and I'd like to install http://forum.xda-developers.com/showthread.php?t=964223
what have i to do? the various tutorials haven't helped me
Click to expand...
Click to collapse
firstly,have u rooted and already had xrecovery installed?

I've 2.0.1 so i think I've to upgrade to 2.1.1 but on 2.0.1 I've app2sd, jit, xrecovery and obviously root so once upgraded I would root and install xrecovery without problems, the problem is what have i got to do after?

yes you have to upgrade first as in the thread mentioned the rom will only work with 2.1.1 and baseband 15..after upgrade install rooted and xrecovery installed,download the rom (which is update.zip file) dont extrated it..just placed the update.zip file inside your sd card..dont placed it inside any folder,just placed it in ur sd..then reboot..and press back button several time until xrecovery appear..i suggest u to make backup first ,choose backup at xrecovery option for later used (if something goes wrong you can always restore back)..and would be better have backup all things in ur sd (for later used also )then go back to the main screen of the xrecovery..choose install update.zip..then if everything goes fine it will reboot and u have to go to xrecovery back by pressing back button several time and choose factory reset as mentioned in the minicm thread then reboot again..here you go..good luck, remember to always backup ur data before messing around

If You already have 2.1.1 and have it rooted and got xRecovery installed than :
1.Download MiniCM Rom
2.Put the update.zip in the SD card (just drag it onto SD card)
3.Turn off phone and wait 5 seconds
4.Turn on phone and when Sony Ericsson sign appears start tapping "Back(arrow)" button until xRecovery shows (You should make a backup before you install that in every case to be able to resume the state before the installation --> In xRecovery Backup/Restore section)
5.Now install the ROM . In xRecovery go to "Install update.zip from SD card" than "Yes - Install /sdcard/update.zip" and the ROM will start installing
6.Select "Factory Reset" in xRecovery
7.Select "Reboot Phone" in xRecovery (first boot takes about 1~5min)
8.Enjoy new ROM
I think I`m explained quite clearly

+1 Case..its clearly explained good luck Siso.

THANKS i'll do it tomorrow but, if I upgrade now via pccompanion will I have automatically the .15 build? or Have I got to install some other patches?

Siso93 said:
THANKS i'll do it tomorrow but, if I upgrade now via pccompanion will I have automatically the .15 build? or Have I got to install some other patches?
Click to expand...
Click to collapse
yes..pc companion will upgrade both build rom and baseband if not mistaken you will get build no 2.1.1.A.0.6 with baseband .15..

Fail Update x8

hello
I'm having problems installing a custom rom on my x8. Already tried the froiobread gingerdx and with the help of this topic, but without results http://forum.xda-developers.com/showthread.php?t=1222348
The first time the phone blocked on the logo. The second time appeared to gingerdx animation but also kept the logo. What am I doing wrong?
I did exactly the steps: Root, Flash, Firmware, Baseband, xRecovery, CWM Recovery
My card is 2 GB and now I have about 500mb free.
Thanks in advance all the help they can give, sorry my bad english

1)flash via flash tool
2)update phone with pc c
3)install xrecovery
4)cheak if ur baseband ends with 15
5)flash froyobread not gingerdx it requires cwm recovery
Sent from my X8 using XDA App

Get help from this thread http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
Sent from my X8 using XDA App

IROC_69 said:
1)flash via flash tool
2)update phone with pc c
3)install xrecovery
4)cheak if ur baseband ends with 15
5)flash froyobread not gingerdx it requires cwm recovery
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Hello IROC_69
Thanks in advance for the answers.
I did exactly the steps you describe. First I tried with the Froiobread xrecovery gingerdx and then tried to CWM. Both were frozen on the logo. I thought it might be very small memory card. I find no other explanation.
I already did restore everything and everything is operational. My question is to know why I can not install any room with the steps described in the forum

install rom and do full wipe (factory reset) in recovery menu

fifo171 said:
install rom and do full wipe (factory reset) in recovery menu
Click to expand...
Click to collapse
current configuration:
Firmware: 2.1-update 1
Baseband - xxxxxxxx0015
2.1.1.A.0.6
rooted
xRecovery
CWM
I have installed the CWM, can i update the rom with gingerdx?
After installing the ROM is that I do the full wipe?
How much space do I need on my memory card?
What kind of format should have the card? NTFS or FAT32?
greetings

yep, install rom and than full wipe

Now it's good. Thank you very much

Need your help to solve another problem
I can not uninstall applications that comes in the mobile phone. Already installed the app manager but can not uninstall anything that is already in default operating system. Is there any way to uninstall these programs?
greetings

Use titanium backup
Sent from my U20i using xda premium

Hey Dude,
Find online market through your xperia and look for SYSTEM APPLICATION REMOVER which is green colour.
download and install - It need to root permision so better restart after installation.
Try & Enjoy !!!

[Q] Can I install a firmware through SD Card?

Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss

rocky450 said:
Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss
Click to expand...
Click to collapse
http://www.mediafire.com/?x8hpnd1mxdv4j44
use ^ this link
then boot into cwm recovery
then given link is a recovery of DDLE1
restore it
u r done
stock firmware with out odin
HEY, PRESS THANKS I HELPED YOU

Many thanks for your help,I didn't find this file on the net.
One more question, Is this update deletes all the files (including SD card)? Also,do I need to make a backup using apps like Titanium backup?.
waiting your reply

no it cant delete the sd file
your data in phone- like apps,contact
all will erase
but nothing with sd card

there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet

rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Did you used stock recovery or cwm you have to use cwm
Sent from my GT-S5360 using XDA

I have rom manager then I press reboot phone in cwm but it keeps running in stock recovery!

use cmw recovery and first clear your data
atleat your device having 120 mb free space or more......

cwm
use attachment
flash it in stock recovery
DONT SHY, JUST PRESS THANKS

CWM Restore!
rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!

NeelDroid said:
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!
Click to expand...
Click to collapse
Followed these steps but it tells me "MD5 Mismatch!"

Ok installed the rom and everything is working fine (widgets,status bar,apps etc...) except my keyboard!! It is a firmware for samsung s5360 not a firmware for my Galaxy Y Pro b5510!
is there a specific rom for this phone?
thx for the help

helpppp
dont pass of Restoring data...

CAn i install firware from sd card if phone is bricked
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...

arpitraj456 said:
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...
Click to expand...
Click to collapse
if you can get into recovery mode you can either
1. restore a nandroid backup
2. format system data cache - mount system data cache - flash a custom rom zip
if you cant get into recovery mode then go into download mode and flash stock rom via odin (requires a pc)

phone is bricked !!Lol!
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...

arpitraj456 said:
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...
Click to expand...
Click to collapse
cant help you because this forum is for the galaxy y gt-s5360
I have no knowledge of your device - Goto your own phones forum if it has one or the xda question and answer section for non specific phones if it doesnt

my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help

NosHIRoU07 said:
my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help
Click to expand...
Click to collapse
What are you trying to install
Can you manually mount data in CWM?
Did you format data in CWM and then try to mount it?
Are you using the correct cwm?
Is it formatted in the correct file system for your kernel? Rfs/ext

please help me to upgrade firmware of lenovo tab a1000g from sd card
please help me to upgrade firmware of lenovo tab a1000g from sd card

heeelp

somone help me , i want to install new update of CM SCREAM by ling gan but when i install zip file and reboot devise , in bootloader nothing happend ,android startup dosent start , whats the problem . please help !!! :crying:

If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.

dstar000 said:
If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.
Click to expand...
Click to collapse
how can i reflash , from recovery ?

go to the right thread
milad.bmi said:
how can i reflash , from recovery ?
Click to expand...
Click to collapse
there is a whole thread about this rom .. check it you will find the answer
http://forum.xda-developers.com/showthread.php?t=1678409

[Orange Reyo][Zte Blade Q Maxi] STOK ROM BACKUP

Orange Reyo(ZTE Blade Q Maxi) STOK ROM BACKUP
Download
here you have a backup from stock rom of Orange Reyo (romanian version)
backup have stok recovery and stok files with some Orange apk's missing
with this you can restore your phone to factory rom and setings
rom will boot in romanian but i think you will be abble to set your language(if not, just ask me)
the backup wil be instaled with SPflashTool
in the downloaded package you will find the rom backup zip and the SPflahTool zip
extract both
hope you have the drivers instaled on the pc
-charge the battery, min 50% and turn OFF the phone
-open SPflahTool
-sellect the scatter file from Orange Reyo backup
all files will be charged automatical
#########################################################################
###### if you want to flash just recovery, uncheck all others files except recovery ######
#########################################################################
############# or uncheck all unwanted files to keep the desired files ###############
#########################################################################
- press DOWNLOAD
- conect the phone to the pc
and the instal proces should START
when is done, you will see a DONE image
reboot the phone, if it is stuck in bootlogo, reboot the phone in recovery and do a"wipedata factory reset" then reboot again
The install process will not work if the drivers are not properly instaled
Reboot the phone/ set the language
and ENJOY by the stok rom
###### To restore your country stok rom #########
after install that backup, download and copy on sdcard and in the internal storage
your stok rom downloaded from ZTE site (update.zip)
reboot the phone in recovery stok (not CWM custom)
-factory reset
-aply (install) update from sdcard
the process will start and the phone will be restored
if you get error then unroot the rom and try again(on my phone work without unroot)
Hope this will be usefull for all of you
This Backup was made with extraordinary help from mamulos2002

vaserbanix said:
Orange Reyo(ZTE Blade Q Maxi) STOK ROM BACKUP
Download
here you have a backup from stock rom of Orange Reyo (romanian version)
backup have stok recovery and stok files with some Orange apk's missing
with this you can restore your phone to factory rom and setings
rom will boot in romanian but i think you will be abble to set your language(if not, just ask me)
the backup wil be instaled with SPflashTool
in the downloaded package you will find the rom backup zip and the SPflahTool zip
extract both
hope you have the drivers instaled on the pc
-charge the battery, min 50% and turn OFF the phone
-open SPflahTool
-sellect the scatter file from Orange Reyo backup
all files will be charged automatical
#########################################################################
###### if you want to flash just recovery, uncheck all others files except recovery ######
#########################################################################
############# or uncheck all unwanted files to keep the desired files ###############
#########################################################################
- press DOWNLOAD
- conect the phone to the pc
and the instal proces should START
when is done, you will see a DONE image
reboot the phone, if it is stuck in bootlogo, reboot the phone in recovery and do a"wipedata factory reset" then reboot again
The install process will not work if the drivers are not properly instaled
Reboot the phone/ set the language
and ENJOY by the stok rom
###### To restore your country stok rom #########
after install that backup, download and copy on sdcard and in the internal storage
your stok rom downloaded from ZTE site (update.zip)
reboot the phone in recovery stok (not CWM custom)
-factory reset
-aply (install) update from sdcard
the process will start and the phone will be restored
if you get error then unroot the rom and try again(on my phone work without unroot)
Hope this will be usefull for all of you
This Backup was made with extraordinary help from mamulos2002
Click to expand...
Click to collapse
hello ,
i flashed it via SP flash tool ..succesfully but i got bootloop and cant access recovery ...any suggestion ?

zaxxpp said:
hello ,
i flashed it via SP flash tool ..succesfully but i got bootloop and cant access recovery ...any suggestion ?
Click to expand...
Click to collapse
you followed carefuly all steps?
Trimis de pe al meu SM-J500F folosind Tapatalk

vaserbanix said:
you followed carefuly all steps?
Trimis de pe al meu SM-J500F folosind Tapatalk
Click to expand...
Click to collapse
dont know only about battery cuz i got bricked phone :/

I find Stock rom for ZTE Blade Q Maxi on this Site
kinotube.info/channel/watch/lOg52L-wBsQ
----
mega.nz/#!w8x3iADC!OsNuOELkG5SE9z5cu-gvyaIQxqFCssMmc4_GxR1W-BI
pass __ gem-flash
----
There is stock rom for ZTE Blade Q Maxi with which can move apps from phone to SD card.
But it's a full of Viruses, adware, malware and hijacking trojans.
If someone know how to remove viruses and others stufs. Or find what was change in android to be able move to SD Card, and put that change in regular clear stock rom?

I'm also followed these instructions step by step and got bootloop and cant access recovery... is there any solutions now ??

How to install update.zip from zte official site localized for polish users?

Vchornyy12 said:
How to install update.zip from zte official site localized for polish users?
Click to expand...
Click to collapse
copy the update .zip on sdcard and/or in internal(i dont remember well in wich partition recovery read the updates)
reboot the phone in recovery stok(not custom or TWRP)
do "wipe data factory reset"
select "install updates from sdcard"
select "yes"
and let the recovery to install
then reboot!

bro i dont know but i bricked 2 boards already ... how can i verify my board to see if its really zte blade q maxi ? pff ( ce drq ? )
Finally i flashed this stock rom but its stuck right after orange logo . I formated via sp flash tool and still stuck. Do i need to root and install custom rom ?

Winchester1995 said:
bro i dont know but i bricked 2 boards already ... how can i verify my board to see if its really zte blade q maxi ? pff ( ce drq ? )
Finally i flashed this stock rom but its stuck right after orange logo . I formated via sp flash tool and still stuck. Do i need to root and install custom rom ?
Click to expand...
Click to collapse
just pull out the battery and look under it
should be written there you phone model and imei
Sent from my Moto G5s using Tapatalk

vaserbanix said:
just pull out the battery and look under it
should be written there you phone model and imei
Sent from my Moto G5s using Tapatalk
Click to expand...
Click to collapse
i cannot enter recovery mode i even flashed twrp sucesfully and i still cannot enter recovery. Phone remains blocked at logo after orange appears on screen. i even used hot air blower on it and still the same issue