Database Users

**Rooted Phones*** Reset back to First Time Root

Ok apparently in my futile attempts to OC the Pure Hero 1.0 Rom I've totaly got something hosed up. The phone works but features that others have working flake out on me. Is there a way to wipe fully the whole thing and reset back to the rooted 2.1 Rom as we did before the Recovery image.
If it is as simple as just flashing the original developers Rom please don't flame me..I did search.
I do a factory wipe then Dalvik Wipe then Ext Partition wipe before flashing an image.
I currently can't get Wifi to work on Punk.Kaos Rom nor on the Pure Hero (I think that was an issues though)..
Thanks for all the hard work you guys do....

copy a rom you want to use to your sdcard. then go into recovery, wipe the phone, then flash zip from sdcard. done!

That is what I have been doing and some of the settings are still flaking out and the Kaos rom is V15 he fixed wifi in v2. I can't even get Jamezelle's sensable rom to even flash with out a boot loop at animation.
Thanks for the help.

No nandroid backup?? I know before flashing the first Rom on the phone I made a nandroid back up on my wifes and pretty much do everytime before flashing a new rom. These things are priceless

Follow the the original root procedure.

*Suggestion*, when phone boots.... open setcpu and adjust the CPU OC setting.... maybe...

id say go to the downgrade to 1.5 from 2.1 root thread and do that and then re upgrade and reinstall the recovery image.

I agree with doing a full downgrade to 1.5 and rooting again. I had problems similar to yours and this solved the problem. Good luck.
-------------------------------------
Sent via the XDA Tapatalk App

Thanks I just wanted to confirm that should be the process of going to 1.5 thne to 2.1 and restoring the Recovery. One last question and then a Mod can close this thread. The Rom Manager in the Market will that work for us or is that a Droid only thing?
Thanks for the great advice.
Forgot to answer the nandroid backup yes did it before every new flash of a Rom they would come back weird also. Secondly how do I get my SD card back to full Fat32 and not the ext+Fat partition for A2SD mode? I never could get the A2SD to work fully.

Openfire ROM Problem

Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.

did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk

I backed up the stock firmware I already had manually, before it prompted on the flash.

did you do a full wipe before flashing the rom?

No i didn't, thought it would be safer incase something went wrong?

run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk

if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...

Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.

Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?

you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.

Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?

go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card

Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.

Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?

Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.

go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that

Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????

sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.

I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...

I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.

[Q] Defy restoring itself to old ROM automatically!!!

Hi All,
I am new here and this is my first post. But i have been reading this forum for quite sometime and know that u guys are now my final stone. I am a proud owner of a Motorola Defy. And I am having this strange behavior, which is effectively rendered the phone almost useless. The phone is acting like its got a restore point in itself, and every time i restart.. it gets back to that point in time.
This includes app installs, uninstalls, stuff placed in system through adb push, theme, everything in the OS. I tried installing a different ROm through clockworkmod, but its not taking effect. Its saying install success but as soon as it restarts, its going back to the old ROM. (takes time to load, so i guess it reinstall back/restored the old version)
Details of device : I am from India and the phone was manufactured in India in around April/May 2011. Its a red lens Defy and and came with Eclair. I updated it officially to the first Froyo release for SEA region. After that i rooted the phone with superone click, and installed WIUI rom. I have been updating the ROM with newer versions around each month. The last one was 1.11.18 though as i waiting for a good ICS version to flash.
The problem occurred after i started installing some gold apps from getJar. It restated in between and install... and that point is kind of acting like a restore point even now.
Things I did: Tried installing different rom by CWM method. Reinstalling second init and CM, both old and new version. Tried restoring nandroid backup of my official ROM. Tried fixed and full sbf flash through rsdlite 4.9.5.2 and now 5.6. First 3 things reset as soon as i restart. For RSDLite, it gives checksum error for each and every ROM i tried. I tried all SEA releases, JORDN_U3_97.21.51, Defy Plus Rom 2.3.6, 2.21 first eclair rom, everything gives the same error. From the RSDLite logs, i could see that there is something wrong as.. say the last successful CG was 33, and the error came for 34, the log says its expecting the checksum on the sbf to be equal to that of CG 33. Its taking the last successful checksum validation and expecting that for all the CGs henceforth. its not showing what the device actually has.
I atlast could somehow, but trial and error, removed all the CGs which were throwing error, and recompiled the sbf to make it pass the RSDLite flash. The CGs present in the ROM (JRDNEM_U3_3.4.3-36-1.7) were 32, 34, 42, 53, 61, 64, 65. And as soon as it booted, it restored back to the checkpoint. Even after i formatted by card and put it in, the app shortcuts remained on the home screen, but as the apps on the card were gone, they are just junk and doesnt open anything.
Thanks in advance. Please let me know what you need from me to help me resolve this issue.

Any help... Anyone?

Can someone please suggest something?
This is what i got from some people. I am not sure how far this is possible, but somehow the theme i installed just before this all happened, from MIUI market.. somehow managed to change something inside phone's kernel, past the locked bootloader? I am totally a noob in this and just a wild imagination?
Or may be some sort of cache wipe is happening everytime the phone boots up, So even when i install the ROM, when it boots up, it gets back the old ROM.. like what would probably happen if i do a factory reset soon after i instal a rom before the restart..?
I would really appreciate it if anyone could help me out with this...

Checksum errors were for me also.
I tried my office computer for flashing and instantly flash was done. The checksum error occurred 7 times on my good computer before that.
Reflashing froyo must take care of all errors happening

Thanks Kapil fr the response. Are you from india? Which sbf did u flash? And waht all did u install in the office pc? I have a pc of my friend where i can try to reflash if you tell me the exact steps that u took in the fresh pc.
Also, can anybody tell me how to use adb commands in CWM mode? Its recognizing my phone in normal mode but as soon as it boots in Moto recovery of CWM, its not recognizing anymore. Want to use adb format commands from recovery.

Hi I was able to use adb in CWM, but format commands were not working. How can i format the system partition? please help me with this.

Is there anyone here who know how to restore a nandroid backup manually using adb commands for MB525???!!!!!

Sounds weird and impossible. Try this. Wipe everything though cwm and flash new rom. Try ms2ginger.

Thanks darshanonline for the suggestion. I tried to wipe everything.. factory reset+cache+dalvik cache wipe. And then tried to install cyanogenmod 7.1 as well as 3 different wiui builds. Everytime it shows that the install was successful, ut as soon as i restart, it would go back to the old ROM.
Is there any checkpoint system in android, seeing the init.rc, i can see comments on something about saving a checkpoint. Is there any particular condition under which this checkpoint may be getting used on very restart?
Also.. is there any way for RSDLite to skip the chksum validations and get the install anyways?.. Some sort of a hack into it?

Ok.. Found something else thats happening. I dont need to shutdown for the system to revert back. Say i install a few things new after a reboot.. After some time.. 1 day at max, i am not able to open them, and neither am i able to open manage applications or market. Everything force closes. I have Ti Backup installed, and i opened it, and i didnt find the new apps to back up. I connected the device and checked through adb, and they were not present in the app folder. They just vanished... So basically after a certain point of tiime, the new stuff just gets deleted on its own.
Guys i know i may sound dumb and stupid with my questions, but i really couldnt find any solution on the net for this. Please tell me waht i should do, and i'll do it. But tell me something. Dont ignore please!

and you did wipe data from within stock recovery (vol down+power etc.), i presume..
Sent from my MB526 using Tapatalk

Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.

Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834

Soumik84 said:
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Click to expand...
Click to collapse
DL WIUI 1.12.16 ICS > copy to SD card > Boot in CWM > select zip to install > Install WIUI 1.12.16
Hopefully your problem should be solved.
I found 1.12.16 ICS with lesser FC than the 2.21

labsin said:
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Click to expand...
Click to collapse
Thanks for the link. Now i know that i am not the only one having this issue. But even there its not resolved yet.

@ headers.chennai - Thanks. I will try that ROM, along with Pikachu ROM with Aroma installer, might be a different installer can try fix it?!
BTW.. does anyone have the TI OMAP board utility? Any chance that it can be available outsite here?

I tried the arora installer and it supposedly formatted the system partition and remade it.. but as soon as it finishes and i restart.. I get back the same ROM.
Is it some way that the files are not getting deleted, like some hardware lock or fault?

Soumik84 said:
I tried the arora installer and it supposedly formatted the system partition and remade it...
Click to expand...
Click to collapse
Hi, bro! What is "arora"? I should try it asap, and all other chance.
My trouble here, same as your.

Hey man.. looks like we are having same problem...
Sorry abt the typo... its Aroma Installer. Its with the Pikachu ROM in this link :
http://forum.xda-developers.com/showthread.php?t=1498843
Its a new installer that launches from cwm when u try and install this ROM. u got some options to select and on selecting the complete install option,, the log shows that it formats the system partition and then creates it. I saved the log file, but for some reason the file shows up blank now. Might be problem with the launcher.. or my phone.. dont know.

Soumik84 said:
Its a new installer that launches from cwm...
Click to expand...
Click to collapse
Not for me, my checkpoint without cwm

[Q] BOOT LOOP CM7.1 please help me. what shall i do?

please help me.. im using CM7, i wanted to have an android market app, savad anjillath from facebook gave me this site "goo-inside.me/gapps/gapps-hdpi-20100817-signed.zip" i installed it and rebooted my phone... now it is in boot loop at the cyanogen 7 logo.. i dont know what to do now.. please help me....

That's a gapps zip from 2010... It's like 1.5 year old. That's 20 in Android years ^^. I think it was meant for CM6.
Things you could do:
Go to custom recovery, Wipe data/cache, Install latest CM7 rom(not necessary but recommended => latest changes are kind-a cool), Install the gapps for gb(gingerbread): http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
Another thing is to install adb, learn to use it a bit, and try to delete all the files from the zip. That way you don't lose your apps/data. Or make a script in the zip that deletes all these files. It's just listing everything.
Or make a nand-backup fist, buy the paid titanium backup app. The latest version can recover apps from a nand backup (I tought)
But it you don't necessary need any data, just go with option one.

u can try to enter the customer Recovery,execute wipe,and then reflash your rom

first just try to restart ur phone after pulling off ur battery .. happens to me all the time .. 2nd time always works

[HELP] Bricked My U8800 [15Feb2013 Update]

Now, I dont usually open threads, but I have an issue here. I've searched and read a lot on how to recover the U8800 in case its soft-bricked, but I've tried the reflashing 2.2 method (Fails in about 5 seconds), Linux method (blefish's method, buzzcomp's method could not yield any results. I connected the phone in the bootloader mode (pink screen) to a Linux PC, but it doesnt appear as a new device there.
Then I tried to upgrade to 2.3, it installs fine, automatically enters recovery (formats data, cache etc), reboots a lot of times (bootloop?). So now whenever I on my phone, the Huawei logo just keeps flashing.
I've also tried to replace the files when connected in the pink screen by replacing the boot.img , recovery.img, amss.bin , EMMCBOOT.mbn file, yet it bootloops.
Prior to this, I had downgraded from Aurora to the stock 2.2, which worked fine. Then I replaced the stock recovery with CWM (the correct one, not the U8800 Pro's). I did the usual clearing of cache, data, formatted system, wiped dalvik cache in order for me to upgrade to a new ROM. Everything went downhill from there
UPDATE : I managed to get 2.3 to be installed. But everytime I enable "USB Debugging", upon the next reboot, there will be a lot of apps which closes unexpectedly, like the Huawei Launcher, Google Framework etc etc. I've tried B526 and B528, but everytime I have "USB Debugging" enabled, this happens. It works fine on 2.2 though
UPDATE 2 : After my fresh installation of the official 2.3, I'd changed the launcher to Holo Launcher, but it fails at starting up. If it does, it keep saying that Holo launcher has closed unexpectedly. The only way to fix it is to boot into recovery and wipe data.
Any help?

bump

U make mistake when you using more method to repair that device. Do you repartition before this. U must back to official partitiob fisrt. Flash that official partition once only not like the tutorial. I face that problem before but everything good now
Sent from my u8800 using xda premium

yusopa said:
U make mistake when you using more method to repair that device. Do you repartition before this. U must back to official partitiob fisrt. Flash that official partition once only not like the tutorial. I face that problem before but everything good now
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
Where can i find the stock partition flash file?

I've found the original partition file from geno, flashed it then installed the official 2.3
everything seems fine, but if i change any settings like turning off fast boot, USB debugging, etc, the phone will bootloop.
UPDATE : I had fast boot disabled, booted in, and now I'm flooded by FC notifications....

I've found the original partition file from geno, flashed it then installed the official 2.3
everything seems fine, but if i change any settings like turning off fast boot, USB debugging, etc, the phone will bootloop.
UPDATE : I had fast boot disabled, booted in, and now I'm flooded by FC notifications....
Click to expand...
Click to collapse
hey i have this same mistake, i have the first boot fine after installing the official rom, but when i reboot the phone in normal boot (diisable fastboot) the phone gets bootloop, so i can't root it in order to put a new rom. i've downgrade to 2.2 froyo and get sum errors after installation but seems to work fine with 2.2 (can even root and install cwm).
after this i try again to upgrade to 2.3 official gingerbread, fist boot is fine, but when i reboot i get again stuck in bootloop... pls help

I am having the exact same issue, does anyone know how to fix this?

The problem is solved？

zgulia22 said:
The problem is solved？
Click to expand...
Click to collapse
I dont know for sure. I flashed another B528, same issues. Tons of FC messages.
I flashed an older B517, installed CWM, flashed DZO's excellent Aurora 5.0, and everything seems fine, for now.