Related
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Doesn't pressing the "End call" button for 2-3 seconds also lock the phone?
Regards!
I do understand what you're saying. I figured out something really basic just the other day, that is if your phone is locked or in sleep mode just pull out your stylus and it'll unlock and wake up.
Just 1 movement.
Sorry if this is really common knowledge and you already know this but sometimes we overlook the more basic functions on such a complex device!!
Cheers
DB
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
jon- said:
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
Click to expand...
Click to collapse
Yep i do this too.
Press the power button mate, and it will lock the phone
I like how the phone unlocks when you take the stylus out but i didnt like how it locks the phone when you put the stylus back in, so i removed that function using the options in gyrator
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
matou25 said:
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
Click to expand...
Click to collapse
why my HD no "Phone Canvas"?
Jezwick said:
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
Click to expand...
Click to collapse
I searched a long time for this, but I didn´t find a solution
Standby locking
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
surfaczer said:
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
Click to expand...
Click to collapse
Have you tried HDTweak?
ScarySquirrel said:
Have you tried HDTweak?
Click to expand...
Click to collapse
Please explain
device lock
gt112 said:
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Click to expand...
Click to collapse
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
JPW said:
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
Click to expand...
Click to collapse
You're Irish too, I presume?
The other option is you attached a very small cab.
OOOPS forgot cab
have edited post now
Jon
Should the device lock when I put the stylus in? I get the impression from this thread that it should but mine doesn't?
hello all X1 users
when request to make call through speed dial one bubble ask to confirm coming from upper bar with "yes"and"no" buttons.
using SE panel 1
any idea or REG tweak to remove this bubble and executing call immediately after pressing the speed dial ???this will be more safe whenever you need to make call when driving car .
thanks in advance
Yeah these bubbles are annoying, also popup for wifi, bluetooth and phone on off icon.
Anyway press and hold for quickdial is how I do it !
loggy said:
Yeah these bubbles are annoying, also popup for wifi, bluetooth and phone on off icon.
Anyway press and hold for quickdial is how I do it !
Click to expand...
Click to collapse
I've just tried TomTom 7 with xperia x1 and it works great expect for some damn popups. I had my earphones connected to the device, and WM kept bugging me with pop-up telling me the ive connected stereo phones. The pop-up never went away, and i had to repeatedly press on the screen to make i go away and tom tom to keep updating my position. That was both dangerous and annoying.
So anyone know how to get rid of the popups?
just a little bump to get help..
bump..
another bump... does anyone know any fix?
and another bump
has anybody ever experienced this before?
while talking to the phone, your ear is pressed against the screen hence accidentally touching the screen with your ear and doing unwanted tasks
i have tried lowering light timer and;
pressing the on/off button once to turn off the screen
i find this a big problem for me, its an inconvinience, anybody has got any solutions for this?
thanks
use xperia tweak (use search function)
There is an option to urn screen off during calls
im using xperia tweak 2.0
all i see is
"disable screen turning off during calls" wouldnt this be the opposite of what u want?
I keep my screen on during calls and my cheek does not press any buttons, even when touching. Maybe your cheek bone or ear is too pointy?
lol actually its the clock button at the windows bar is being pressed on and it changed itself to analog/digital
Eh?
Standard behaviour is to switch the screen off during a call. So unless you changed it, why is your screen on? I wish this worked like y iphone and siwtched as you put it to your head, then screen goes back on when you pull it away during a call.
Same for me, my screen has never gone off while calling. Same by enabling and disabling the feature in Xperia Tweak.
I read somwhere that R2 changed that behaviour in opposition to R1..
alias_neo said:
Standard behaviour is to switch the screen off during a call. So unless you changed it, why is your screen on? I wish this worked like y iphone and siwtched as you put it to your head, then screen goes back on when you pull it away during a call.
Click to expand...
Click to collapse
agreed, even the nokia 5800 comes with the proximity sensor feature...
Just made a hard reset because of lots of beta software testing, I reinstalled only my very needed software, and the screen turns off like expected during the calls. I am in R2.
press the power to off the screen during calls.. best and free
leobox1 said:
press the power to off the screen during calls.. best and free
Click to expand...
Click to collapse
inconvenience
but thats all i have bene doing now...i was hoping for an app to fix this
I know this question has been asked already but has anybody yet found a way to disable to hardware buttons whilst the phone is locked to prevent accidently answering or rejecting an incoming call whilst removing the HD2 from your pocket or pouch?
I have tried various software, tweaks that i found whilst searching this site but cant get any of them to work
Had my HD2 since Tuesday and love it, just need to find a way to stop answering the phone when taking it out of the pouch!
This is very important thing and I hope someone will find a solution soon.........
hi
there are solutions, pokectshield and s2u
iosu
I too need this, I have tried the ones mentioned but they either dont work or they have their own slide ontop of the HTC slide, so 2 in effect.
Would be nice to have one that just disables the button!
S2u2 and pocket shield did not lock the volume buttons for me so when in pocket they were still pressed annoying me a lot when I listen to my tunes. Pressing any other button was bringing the screen back to lock so in other words no difference at all.
iosub said:
hi
there are solutions, pokectshield and s2u
iosu
Click to expand...
Click to collapse
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
There is a perfectly working solution for this here:
http://forum.xda-developers.com/showthread.php?t=556801
Simple and nice, install and soft reset and never worry about pressing the button while taking your phone out of the cover.
umiss said:
There is a perfectly working solution for this here:
http://forum.xda-developers.com/showthread.php?t=556801
Simple and nice, install and soft reset and never worry about pressing the button while taking your phone out of the cover.
Click to expand...
Click to collapse
That application is for locking the hardward buttons when in a call, not when the phone is locked, or am I missing something?
Cret said:
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
Click to expand...
Click to collapse
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
johncmolyneux said:
That application is for locking the hardward buttons when in a call, not when the phone is locked, or am I missing something?
Click to expand...
Click to collapse
It's quite the other way around. At least the cab I installed. Hardware buttons work in call, but when the phone is locked and there is an incoming call the buttons are locked (to prevent the accidental pressing).
Hence, not disabling anything you actually would like to use.
EDIT: This is what the description says:
"InCall Lock will temporarily disable Send (aka Talk, Green) and End (aka Red) hardware buttons when you receive an incoming call in order to prevent accidental call pickups/rejects while you are pulling your device out of your pocket. All other hardware buttons are untouched."
So the name can be obfuscating, but as the description says, the yes/no hardware buttons are disabled during an incoming call (prior to answering), but active during the actual call.
chongbh said:
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
Click to expand...
Click to collapse
This thread is not about disabling buttons when there is an incoming call.
I can't believe there is not solution for this problem yet !
Xeon said:
I can't believe there is not solution for this problem yet !
Click to expand...
Click to collapse
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
umiss said:
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
Click to expand...
Click to collapse
What I want is to prevent the keypad from waking up the device unless you press the power key.
Cret said:
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
Click to expand...
Click to collapse
chongbh said:
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
Click to expand...
Click to collapse
umiss said:
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
Click to expand...
Click to collapse
No one here wants buttons to be disabled when call is incoming. We just want buttons to be disabled when you put device in to sleep.
Go on test it. Put music on in music tab or WM player or any other with your headphones or without. Press red button to put device in to sleep mode (use manual lock if you have disabled auto lock). Press volume buttons and see what happens.
If you have s2u2 or pocket shield or nothing effect is the same.
ruscik said:
No one here wants buttons to be disabled when call is incoming. We just want buttons to be disabled when you put device in to sleep.
Go on test it. Put music on in music tab or WM player or any other with your headphones or without. Press red button to put device in to sleep mode (use manual lock if you have disabled auto lock). Press volume buttons and see what happens.
If you have s2u2 or pocket shield or nothing effect is the same.
Click to expand...
Click to collapse
I'm sorry but I can't agree with you. The thread clearly states in the first post
"has anybody yet found a way to disable to hardware buttons whilst the phone is locked to prevent accidently answering or rejecting an incoming call whilst removing the HD2 from your pocket or pouch?"
The answer to this is yes, and I've linked to the solution previously.
ruscik said:
No one here wants buttons to be disabled when call is incoming.
Click to expand...
Click to collapse
Sorry buddy but you're quite wrong. That's EXACTLY what I want and apologies if I wasn't crystal clear in describing it - I may not have been since I also want the same as you.
Umiss - I'm going to go and check out that cab you mentioned because if that really works then brilliant!!!!
Cret said:
Sorry buddy but you're quite wrong. That's EXACTLY what I want and apologies if I wasn't crystal clear in describing it - I may not have been since I also want the same as you.
Umiss - I'm going to go and check out that cab you mentioned because if that really works then brilliant!!!!
Click to expand...
Click to collapse
so how do you want to answer a call with this cab installed and enabled?
i also would like to prevent unwanted presses....but i do want to reject or accept a call on some way, without mispressing a button.
When a call comes in the screen is enabled so I just slide to answer or reject. It won't happen by accident in all likeliness, and removes the huge annoyance of the hardware buttons being accidentally pressed. It's the one thing that majorly pisses me off about this awesome phone.
If they wanted to, they could simply do a cab file that disables them perhaps when the proximity sensor detects the face of the phone is against something. That would be good too, unless I'm not considering some factor.
Hmmm, I've just installed that app and it seems to only partly work.
The reject call button locks perfectly but the answer button does not lock so it can still be pressed. I also managed to press the home button and get to the Sense screen once, but when I tried this a second time it didn't do it, so I think it might be a bit buggy.
A definite step in the right direction though, at least I now have fewer buttons that can be pressed accidentally!
Hi, I just bought the M2 and I have an important question...
As topic: it's possible to enable vibration anytime I press the screen?
i dont want o know this propouse, but i can make a app that when you touch the screen your app will VIBRATE the phone, but with default settings its not possible, and not right, because M&%!(*blur is starving of battery and if everytime you touch the screen your phone vibrate you will need to carry you phone pluged in a recharge
skulljoi said:
i dont want o know this propouse, but i can make a app that when you touch the screen your app will VIBRATE the phone, but with default settings its not possible, and not right, because M&%!(*blur is starving of battery and if everytime you touch the screen your phone vibrate you will need to carry you phone pluged in a recharge
Click to expand...
Click to collapse
I mean, vibration tactile feedback...
you have some options at configuration menu, when you press a key from touch keyboard or when you tray to move some icon, but not when you do just a click to open some app
Note: This 'feature' will decrease your battery faster