hello all X1 users
when request to make call through speed dial one bubble ask to confirm coming from upper bar with "yes"and"no" buttons.
using SE panel 1
any idea or REG tweak to remove this bubble and executing call immediately after pressing the speed dial ???this will be more safe whenever you need to make call when driving car .
thanks in advance
Yeah these bubbles are annoying, also popup for wifi, bluetooth and phone on off icon.
Anyway press and hold for quickdial is how I do it !
loggy said:
Yeah these bubbles are annoying, also popup for wifi, bluetooth and phone on off icon.
Anyway press and hold for quickdial is how I do it !
Click to expand...
Click to collapse
I've just tried TomTom 7 with xperia x1 and it works great expect for some damn popups. I had my earphones connected to the device, and WM kept bugging me with pop-up telling me the ive connected stereo phones. The pop-up never went away, and i had to repeatedly press on the screen to make i go away and tom tom to keep updating my position. That was both dangerous and annoying.
So anyone know how to get rid of the popups?
just a little bump to get help..
bump..
another bump... does anyone know any fix?
and another bump
Related
Hey guys, i noticed that when the screen turns off or goes into stand by and you recieve an SMS/MMS message, the alert sound still comes on, but the screen stays off. Is there a way to change this? It's sort of annoying having to press the top button just to see if a text message comes in. Can it be tweaked in the registry? If so, what would one have to do to change it? I have a registry editor installed on my phone so if anyone has any ideas......go ahead
Standby when phone call received
Hey all,
An extension of the Q above, When I make or receive phone calls, the screen shortly after goes blank, he only way to see the screen again to press the "Call" buttin again, which puts the caller the call on hold. I have to quickly press the "Unhold button again " which is very annoying!
Any ideas any1?
Thanks in Advance...
samir_d said:
Hey all,
An extension of the Q above, When I make or receive phone calls, the screen shortly after goes blank, he only way to see the screen again to press the "Call" buttin again, which puts the caller the call on hold. I have to quickly press the "Unhold button again " which is very annoying!
Any ideas any1?
Thanks in Advance...
Click to expand...
Click to collapse
Use the power on\off button on top instead of pressing the the Dial button.. it was annoying for me too but the power button does it for me and it's better than to keep the screen on during the whole call since all my calls are above five mins
bump...someone has to have some idea what can be done to fix this
If you install HDTweak ( http://forum.xda-developers.com/showthread.php?t=452505 ), you can disable the screen switching off during a call and/or make the device wake up when a new SMS is received. It works for me.
Installing HD tweak and then going to 2.2 will solve your problem.
try the hd tweak or the diamond config both have twaeks to activate the screen when you receive the sms. but be sure to lock the phone for when you have it in your pocket.
NICE!!!! thanks guys for the info, i will try this ASAP when i get home
GAWD I LOVE THIS FORUM
Doesn't work for me
Juggler258 said:
If you install HDTweak ( http://forum.xda-developers.com/showthread.php?t=452505 ), you can disable the screen switching off during a call and/or make the device wake up when a new SMS is received. It works for me.
Click to expand...
Click to collapse
Hi there, I disabled 1.1 and it still does not seem to work for me
However, Enabled 2.1 and that works.
Please help ...
In HDtweak, I have 1.1 disabled, 1.2 Disallow, 1.3 Disabled
The screen doesn't go off during a call. I can always press the power button to turn off/on the screen manually if i want to save battery during a long call (or not attract attention when calling on a dark street!)
Juggler258 said:
In HDtweak, I have 1.1 disabled, 1.2 Disallow, 1.3 Disabled
The screen doesn't go off during a call. I can always press the power button to turn off/on the screen manually if i want to save battery during a long call (or not attract attention when calling on a dark street!)
Click to expand...
Click to collapse
I did the above and it worked...I missed those parts of the instructions
Thanks!
Hello all,
I have searched for the answer to remove several pop balloons without any luck. I hope you can help me with this.
While talking on my HTC TOUCH it seems I am touching icons with my ear setting off different pop ups.
The one I am having the most problems with is the connectivity pop up at the top of the screen. This pop seems to activate when the Ev icon is pressed.
Also the phone pop ( which seems to activate when pressing the signal icon) pops up from time to time as well.
Is there a way to disable these icons?
Thanks
im not aware of any way to get ride of those, but i have set my phone to automatically turn off the screen when the call is connected and turn it back on as soon as the call is finished.
u can do it with S2U2, setting on the ´blank screen on talk´ option.
I admit defeat, I've serached and searched for both these issues so forgive me if they are stupid questions
First daft question, how does the end call key work? the actual hard button, not the one on the screen. I know it works because if I press it while in the control panel it'll beep and drop back to the today screen but try as I might when I have the phone app up it just will not end a call..... Whats it for if it doesn't do that?
The reason I need to know is my case has a hard cover for the screen so without opening the case I cant press "end" on the touchscreen.
Second daft question, sometimes when typing on the keypad (any of them) sometimes the startmenu pops up and I end up opening an app instead of pressing a key. So annoying when it happens LOL
I've tried loads of WM6.1 roms to resolve the problems but generally find something that doesn't work and am finding that WM5 (The original Orange UK ROM) is more stable and certainly quicker but nothing I do resolves these two problems.......
Oh and while I'm here, does anybody know which is the best threaded SMS thingy for WM5? loved that feature on 6.1
Thanks in advance for your time guys
Tim
Hello. I also have teh problem with teh start menu wich pops up when I touch the screen. Sometimes it happens more often, sometimes no. Anyone knows what might be the problem?
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
I just recently bought my Note 4, and have to say it is the single best phone I have ever owned lol. I am still trying to learn about it. I mean it is Rooted and I do not even know what that means LOL
Anyways the reason I joined is because I need help. This has been happen off and on, my phone keeps beeping every time I shake my phone. I did not know you can shake the phone and even have it do anything (I need to really learn more about my phone haha). When I am out walking the beep drives me bonkers! It will even bleep during the start of a phone call. I recorded the sound and really hope that I can upload it.
Thank you in advance for any help you may be able to provide. I am sure it is just something simple, but I am not seeing it
Hi there,
A simple Google search brings me here:
http://forums.androidcentral.com/samsung-galaxy-s4/282858-2-tone-beep-sound-constantly-playing.html
Did you try turning off NFC to see if this causes the problem?
(This doesn't seem to happen on my handset when turned on btw.)
Else turn off Orientation Lock maybe?
(Seeing the fact you say it occurs more when you move or shake your handset.)
Question: Does the sound also play if the profile is on silent mode?
Kind regards, Stefan.
Thank you for taking the time to respond to my question
I came across that same thread when I was searching for answers before coming here. It did not find it relevant because my NFC is not on.
I was able to kind of see a screen before silly me accidentally hit the back button. I did not see the name of the app, but it was a white background with a picture of an orange mic and switch on the bottom in orange that says sonar. There was probably other things on the page but that is all I saw for the split second I saw the screen. Then it is after it started doing the beeping. When I look at my apps the only ones I have that have anything to do with my mic is S Voice, Voice Recorder and Voice Search, and not one of them are what I saw. The beeping I am hearing same kind of sound I would hear if I tap Voice Search, but that is not what is causing the beeps.
Hi again,
It does sound like the Voice Search beep, but it seems different.
You could try to disable double tap home for Svoice but I doubt if it would work:
Double tap the home button to*open S Voice.
Press the menu button in the top right of the app.
Tap “Settings.”Uncheck “Open via the home key.”
Did you check the screen orientation lock yet?
I assume you have rebooted your handset right?
Kind regards, Stefan.
We are becoming fast friends! LOL
Yes it does sound the voice search, and it does go away after I reboot my phone, I would just really like to know what this is though so I can try to prevent it from happening or turn it off when it does happen.
Again, thank you so much for caring enough to try and help me.
An other thing that ia worth mentioning is under:
Accessibility these is: direct acces.
When enabled it enables certain user set options by 3x pressing the home button.
But I could not find any option that enabled this beeping.
It could very well be a third party app causing it.
Anyways good luck, maybe anyone else has some input.
Kind regards, Stefan.
You might try safe mode to see if an app is causing it. It will temporarily disable all non-system apps. See if that fixes it. If so, it is an app you installed. m.androidcentral (I can't post links yet so change this to a '.') com/galaxy-note-4-safe-mode
Sent from my SM-N910T using XDA Free mobile app