Database Users

[HELP] HD2 stuck on boot screen after HSPL (im not a noob)

hello i just got my HD2 from tmobile (a refurbished one of course) my old htc hd2 screen stoped working idk why, my problem now with this one is that i ran HSPL it had SPL 2.10 i used the HSPL to go on 2.08 everything went well, then i installed energy rom, it flashed everything ok on reboot. it got stuck on the boot screen (NRGZ new boot screen" it stayed der for mintues nothing happend not even the red writing on the bottom came up, i flashed stock rom did the same, after a hard reset it went through after using for 10min it froze! so i flashed stock rom again. HSPL back to 2.10 and phone booted fine didnt freez or anything i rebooted and did the same got stuck ok "stick together" so i cannot install no custom rom, i also did task 29 and tried different radios but no luck... i tryed my old hd2 and flashing went great it went through all the setup and bootscreen...can someone tell me if the HD2 or am i doing something wrong? im returning it for a new to see. please help thanks in advance!!

S3BAZ10 said:
hello i just got my HD2 from tmobile (a refurbished one of course) my old htc hd2 screen stoped working idk why, my problem now with this one is that i ran HSPL it had SPL 2.10 i used the HSPL to go on 2.08 everything went well, then i installed energy rom, it flashed everything ok on reboot. it got stuck on the boot screen (NRGZ new boot screen" it stayed der for mintues nothing happend not even the red writing on the bottom came up, i flashed stock rom did the same, after a hard reset it went through after using for 10min it froze! so i flashed stock rom again. HSPL back to 2.10 and phone booted fine didnt freez or anything i rebooted and did the same got stuck ok "stick together" so i cannot install no custom rom, i also did task 29 and tried different radios but no luck... i tryed my old hd2 and flashing went great it went through all the setup and bootscreen...can someone tell me if the HD2 or am i doing something wrong? im returning it for a new to see. please help thanks in advance!!
Click to expand...
Click to collapse
becuase you got refurbished, did you use that without flashing/upgrading as it comes to you?
there is a possiblity that its already got that problem.

im sorry what do you mean? if i uprgraded the rom when i first got it? no. i got the phone i hspl from 2.10 to 2.08 HSPL everything went good, flashed NRGZs ROM and got stuck on the bootscreen, i tried a few resets until it went through but after 10min the phone shutdown and went back to the boot screen i reverted back all to stock and kept doing the same, are you saying that this will happen also in my next one that arrives? or it was just this one of bad luck that was like this?
thanks so much for your reply and anyone else that helps. thanks.
PS: i think this is my second exchange im not very sure, dont remember. but the old one flashed all perfect

I think it a nand flash issue, may be some sectors thar are being used by the cocked roms is the reason for that freez

task 29 and flash.

SH4YD33 said:
task 29 and flash.
Click to expand...
Click to collapse
will try thanks to all of you, anymore suggestios/tips are accepted =]

SH4YD33 said:
task 29 and flash.
Click to expand...
Click to collapse
will do after task 29 i should put it straight into bootloader right? and flash?

S3BAZ10 said:
will do after task 29 i should put it straight into bootloader right? and flash?
Click to expand...
Click to collapse
once you do task29 at 98% press volume down and you will be in the boot loader mode, then you can flash any ROM ... give it a try

ahmedmph said:
once you do task29 at 98% press volume down and you will be in the boot loader mode, then you can flash any ROM ... give it a try
Click to expand...
Click to collapse
i did im still having the same issue

JackH said:
becuase you got refurbished, did you use that without flashing/upgrading as it comes to you?
there is a possiblity that its already got that problem.
Click to expand...
Click to collapse
i mean to say device could be faulty...
if you get it as replacement from t-mobile,
go ahead flash stock and send back to them for replacement again

JackH said:
i mean to say device could be faulty...
if you get it as replacement from t-mobile,
go ahead flash stock and send back to them for replacement again
Click to expand...
Click to collapse
yes i did, i am gettin the new replacement today, so crossing fingers that this one is 100% working. thank you for your help i really appreciate it =]

[Q] NANDroid...no boot sources ??

Hi,
I flashed the Revolution HD on my LEO via MAGLDR. After flashing it reseted like always (I flashed it a few times ) but instead of booting Android it just says: No boot sources
Here's the link to the ROM...
-the_hd2_cracker

the_hd2_cracker said:
Hi,
I flashed the Revolution HD on my LEO via MAGLDR. After flashing it reseted like always (I flashed it a few times ) but instead of booting Android it just says: No boot sources
Here's the link to the ROM...
-the_hd2_cracker
Click to expand...
Click to collapse
What steps did u tk? are d steps u took inline with the dev's instructions? ...
Summary, u shouldn't be asking here...u'll get much better and faster response in the specific build's thread...here.

I did as the instruction was (good english?!).
But I'll ask in the thread of the build...

Sounds like you missed a few steps...

I Flashed my phone back to Window Rom just for fun , then i reflash it back to NAND , Now Im getting the No Boot Sources Error , Can some one please help

T0v206 said:
I Flashed my phone back to Window Rom just for fun , then i reflash it back to NAND , Now Im getting the No Boot Sources Error , Can some one please help
Click to expand...
Click to collapse
You're basically getting that because you never reflashed your ROM back after you re-flashed MALGDR.
Can you still go in to MAGLDR Menu? If so, try judy flash the ROM again. That'll probably work.
If not, do a Task29, reflash MAGLDR and then reflash the ROM.

Skellyyy said:
You're basically getting that because you never reflashed your ROM back after you re-flashed MALGDR.
Can you still go in to MAGLDR Menu? If so, try judy flash the ROM again. That'll probably work.
If not, do a Task29, reflash MAGLDR and then reflash the ROM.
Click to expand...
Click to collapse
Still No Luck . it work when i flash winmo then from winmo i boot to android . but when i try to flash back to MAGLDR then NAND ----> no boot sources

Use the Recovery_400M
You will be happy!

Flashed a rom, frozen screen! Can anyone help??

Hi all..I just flashed the rom below using CWM and it told me everything was successful, and when I reboot, I have some small white text on the screen and it just stops and freezes. a few lines of text and the last 2 lines are:
[330] udc.start()
[330] -- suspend --
and it just hangs there..Ive pulled the battery, etc..I cant do ANYTHING..I need to flash the other rom back to it, but can I reverse this at all?? Any help is MUCH appreciated!
the rom i flashed:
http://forum.xda-developers.com/showthread.php?t=1209814&highlight=arkat
Thanks SOOOO much in advance...hope I dont have a brick!!

from what I saw, is the first rom that the User does.
"MY 1st Rom here:
[11.AUG.11][MAGLDR] Arkat-DoubleSense v1.2 (GB with sense 2.1) [Rafpigna 2.0 OC GB]
http://forum.xda-developers.com/show....php?t=1209814"
May have problems that have not yet been identified.
The problem is only with this rom or with all?
Try to install other roms, if only this rom has problems I recommend that you talk with arkatis....
I hope I have helped...

Check back to the rom page and see if you did everything right. Are you using clk or magldr?
Sent from my HD2 using XDA App

pianoman102 said:
Check back to the rom page and see if you did everything right. Are you using clk or magldr?
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
Im using clockworkmod...i save the .zip file to the sd, reboot the phone in "recovery" , and then "install .zip from sd card", scroll to the .zip file, and it does its thing..worked fine first couple roms i did, but this one is hung there for some reason..
not sure how to access the phone with it just hanging there to delete the bad rom off there??
Or some kind of hard reset to bring it back to life so i can fix it???

cadorette said:
Im using clockworkmod...i save the .zip file to the sd, reboot the phone in "recovery" , and then "install .zip from sd card", scroll to the .zip file, and it does its thing..worked fine first couple roms i did, but this one is hung there for some reason..
not sure how to access the phone with it just hanging there to delete the bad rom off there??
Or some kind of hard reset to bring it back to life so i can fix it???
Click to expand...
Click to collapse
Update: now it is just sitting there with the
[330] udc_start
as the last line and nothing after...

Can you get to the bootloader screen? ie. the multi-colored screen. If so, try to run Task 29 on it to wipe your phone. Then reload MAGLDR or CLK which ever you prefer. Then try the rom again.

Egrier said:
Can you get to the bootloader screen? ie. the multi-colored screen. If so, try to run Task 29 on it to wipe your phone. Then reload MAGLDR or CLK which ever you prefer. Then try the rom again.
Click to expand...
Click to collapse
yes i can get to bootloader...ill try that now and get right back..thanks for the help...brb

Egrier said:
Can you get to the bootloader screen? ie. the multi-colored screen. If so, try to run Task 29 on it to wipe your phone. Then reload MAGLDR or CLK which ever you prefer. Then try the rom again.
Click to expand...
Click to collapse
ok i can get to bootloader mode by pressing vol down and power...but it just tells me the spl version and stuff and i cant select anything or access any type of menu, etc..

Ok, as you are in the bootloader mode. Download this tool: http://forum.xda-developers.com/showthread.php?t=1090783
And run Task29. This will delete everything but your radio on the phone so you will have to reflash Magldr. You can use this tool to flash magldr also. If you get that far then partition the phone according to the rom instructions. Then try to flash the rom again.

Egrier said:
Ok, as you are in the bootloader mode. Download this tool: http://forum.xda-developers.com/showthread.php?t=1090783
And run Task29. This will delete everything but your radio on the phone so you will have to reflash Magldr. You can use this tool to flash magldr also. If you get that far then partition the phone according to the rom instructions. Then try to flash the rom again.
Click to expand...
Click to collapse
gotcha..im on it...thanks so much for helping and tolerating my newbness haha

OK so far so good!! i was able to run task 29, and flash magdlr 1.13 via hd2 toolkit..searching now but can you direct me to where/how to install a rom using this? im assuming the usb flasher method? thats the screen i have right now!!

cadorette said:
gotcha..im on it...thanks so much for helping and tolerating my newbness haha
Click to expand...
Click to collapse
Egrier I want to thank you soooo much...not really a noob but kind of nooby in the whole rom flashing thing..you pointed me in the right direction and I was able to figure the rest out myself...and im back!!! you saved my phone, thank you so much!!! much appreciation to all that helped me...thanks again!!!

Glad to have helped you. Sorry it took me so long to reply. I was at music practice and didn't get
back home til late. Which ROM did you go with?

Stuck in GO GO GO!

My HD2 started acting strange some weeks ago. It started with it being stuck at the GO GO GO! screen in MAGLDR (v1.13) 1/4 of the times i booted it. And now it wont boot at all. I have now re-flashed HSPL, re-flashed MAGLDR, flashed new ROM. Flashed a new CWM. When trying to boot into CWM recovery menu (AD Recovery) i also get stuck at GO GO GO! and nothing happens. Any ideas of what could be wrong? Hardware related problem?

Wow.. sounds serious bro. Have you tried with Hyperdroid ROM yet?
http://neato4u.wordpress.com/the-roms-specs/ (check the hyperdroid section, sorry not intentional but i can't remember the xda link)
I too get issues stuck in gogogo I don't know why maybe partition thingy or something.. so far Hyperdroid is one of the easiest to flash on.
Hopefully it's not a hardware issue

Did you also installed a radio? for your HTC HD2? Mybe thats your problem.

I just started a treahd about this:
http://forum.xda-developers.com/showthread.php?t=1364900

I think cos of ram memory! try miui

You need to run a t29 then re-install MAGLDR and flash a CWM partition

HD2 Android flashing problem...

I have a HTC HD2 that I had flashed with NexusHD2-ICS-CM9-V1.4 and everythinh worked fine, however the touchscreen stopped working after some damage so I flashed all except SPL back to stock and sent it to be fixed.
I've now got it back (still with HSPL 2.08) and flashed MAGLDR 1.13 back on and CWM, however when trying to boot CWM it gets to 123456 GO GO GO! then hangs, same happens with NexusHD2-ICS-4.0.4-CM9-HWA-SD V2.5 booting from the SD Card and CWM booted from the SD Card.
HSPL: 2.08.HSPL
Radio: Leo-RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
Any advice would be great

JeeSe said:
I have a HTC HD2 that I had flashed with NexusHD2-ICS-CM9-V1.4 and everythinh worked fine, however the touchscreen stopped working after some damage so I flashed all except SPL back to stock and sent it to be fixed.
I've now got it back (still with HSPL 2.08) and flashed MAGLDR 1.13 back on and CWM, however when trying to boot CWM it gets to 123456 GO GO GO! then hangs, same happens with NexusHD2-ICS-4.0.4-CM9-HWA-SD V2.5 booting from the SD Card and CWM booted from the SD Card.
HSPL: 2.08.HSPL
Radio: Leo-RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
Any advice would be great
Click to expand...
Click to collapse
Have you tried task 29? And doing it all over again?
Sent from my NexusHD2 using xda app-developers app

adil1508 said:
Have you tried task 29? And doing it all over again?
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
Yes, we have tried that.

I assume noone else has any ideas then?
May just have to use the stock win mobile rom...

I had the same problem. When the touchscreen wasn't working, I repaired it on a local shop. It was Back with working touchscreen and everything worked fine including Android and Windows except the accelerometer wasnt working In Android.

netchamp.faris said:
I had the same problem. When the touchscreen wasn't working, I repaired it on a local shop. It was Back with working touchscreen and everything worked fine including Android and Windows except the accelerometer wasnt working In Android.
Click to expand...
Click to collapse
i think i have the same problem at first i thought it was the rom but the touch screen not responding

JeeSe said:
I assume noone else has any ideas then?
May just have to use the stock win mobile rom...
Click to expand...
Click to collapse
try the link below, it might help

mengfei said:
try the link below, it might help
Click to expand...
Click to collapse
Hi thanks, we know how to flash it though. We had it working before I sent it for repairs, then flashed back to stock before sending to the insurance company.
Now that it has returned repaired when I try to flash it, CWM does it's '123 Go Go Go' Then just hangs and wont load....
That is the problem I am having.

Still unable to flash. Noone able to help with this problem?

bumping one last time. In the hope someone has come across this problem at some point..
In summary, CWM loads as far as '123456 GO GO GO' then it jams, and goes no further.
Any help appreciated.

I recommend trying to return WM6.5.
Then install Android.
* task 29 can hurt. Windose check the machine's memory and mark the damaged area (if any)

sb1971 said:
I recommend trying to return WM6.5.
Then install Android.
* task 29 can hurt. Windose check the machine's memory and mark the damaged area (if any)
Click to expand...
Click to collapse
Hey, thanks, WM6.5 is installed and fully functional, it installs no problem.