Related
I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.
itzstevo said:
I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.
Click to expand...
Click to collapse
first off once you do HSPL you don't ever need to do it again, and the radio you flashed was 2.15.50.14? once you flash the radio you don't need to reflash it again, unless changing to a different one.
Now I would suggest to start back at task29,
then MGLDR 1.13,
redownload the partition in case of any corruption,
are you using win xp or 7?
if on win 7 right click on the daf and run as admin.
I know there's not much difference from what you said but maybe you have a corrupted download and it's messing things up.
Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users
I'm using windows vista & i tried the HD2 NAND toolkit still the same result. :/
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
Then you have a hardware issue with the phone itself!
Sent from my HyperDroidCM7 HD2
sebasmiles said:
Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users
Click to expand...
Click to collapse
Thanx a lot, I solved problem "stuck on GO GO GO!" with HD2 NAND Toolkit!
I often encounter this problem,too
I really dont know sorry for u
hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee
itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
i'm having exactly the same problem, i'm trying to install android because if i install the stock rom it stucks at the htc logo an when i install android it works for a few minutes but then it freezes
i've searched on google for it and they say that it can be a overheating problem
It was a touchscreen issue when i had this error. I had replaced the digitizer but the ribbon came loose during repair. If, when you boot to the tricolor screen (hold volume down + power), you dont see cotulla hspl 0x40 or 0x50 you have a touch screen problem.
Sent from my GT-N8013 using Tapatalk 2
stuck on go go go!
tanny1 said:
hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee
Click to expand...
Click to collapse
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.
jimani said:
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.
Click to expand...
Click to collapse
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.
Robbie P said:
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.
Click to expand...
Click to collapse
Hi Robbie,
Actually I tried every thing:
At the first time it was a touchscreen issue, I replaced it and try to reinstall the android rom; i used the toolkit 4.3 to flash.
1.HSPL3
2.WIPE(Task 29)
3.Radio-Leo-2.15.50.14
3.MAGLDR 1.13
4.Repartition 280MB for system, 5 for cash.
But when I tried to go in AD RECOVEY, my phone stuck 1234 GO,GO,GO.
I perform this steps on two htc hd2( one is T-Mobile) but no success.
Please help.
Justin.
did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?
Robbie P said:
did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?
Click to expand...
Click to collapse
Hi Robbie,
Yes I installed hspl 2.08 using hspl3.
After DFT MAGLDR Boot loader is loaded I install the partition after that I go in ad recovery to load the Clockwork Mod Recovery then... stuck!
When I tried to boot from the sd card it's say : SD open kernel failed .
I don't know may be I'm mixing things. can you provide me a clear step by step doc?
Thanks in advance.
Justin.
Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.
Robbie P said:
Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.
Click to expand...
Click to collapse
Yes I tried many ways: hd toolkit, tools separately,...
also I tried to specify the folder that the zImage and initrd.gz files are in,but still giving that horrible message:SD open kernel failed
Someone please help me!! Before all i problems my phone kept freezing in boot and i tried everything by cleaning my sd, ad hard reset and changing builds and the same boot freeze kept happening. So after getting tired of that and having to hard reset everyday i eventually flashed TMOUS stock rom then after tried to do the magldr 113 isntall. I got magldr installed on my phone and then i choose the ad recovery. When i do i get this message "no boot source". I tried looking up on these forums and can't find anything to fix my problems. Someone please help me with a step-by-step guide. I don't want to own an hd2 running the crummy wm6.5 :/ I NEED ANDROID
download hd2 toolkit. afterward install magldr update recovery, follow the prompts to install and your done. in a nutshell...you were missing clockwork recovery. let me know if this helps
danielfc741 said:
Someone please help me!! Before all i problems my phone kept freezing in boot and i tried everything by cleaning my sd, ad hard reset and changing builds and the same boot freeze kept happening. So after getting tired of that and having to hard reset everyday i eventually flashed TMOUS stock rom then after tried to do the magldr 113 isntall. I got magldr installed on my phone and then i choose the ad recovery. When i do i get this message "no boot source". I tried looking up on these forums and can't find anything to fix my problems. Someone please help me with a step-by-step guide. I don't want to own an hd2 running the crummy wm6.5 :/ I NEED ANDROID
Click to expand...
Click to collapse
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
YOU SIR ARE GREAT!!! thanks so much!!!!! i can now use android! im glad it works.
Welcome...glad it worked
Sent from my HTC HD2 using XDA App
gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
Great ! I will try it out as well. I have been getting this error for the last few times. I am not sure why this happened.
I installed a WP7 rom and then went back to android (hopeless battery drain with my SD card ... not sure if I can ever do something about that). I could not get back to AD recovery.
Thanks again !
gprash said:
Great ! I will try it out as well. I have been getting this error for the last few times. I am not sure why this happened.
I installed a WP7 rom and then went back to android (hopeless battery drain with my SD card ... not sure if I can ever do something about that). I could not get back to AD recovery.
Thanks again !
Click to expand...
Click to collapse
If you loaded WP7 it may have locked your SD Card - need to format in a Nokia phone. Or reduced the usable size to 200mb - this can be fixed with a partitioning tool from PC
when go back and forth between WP7 and Android the nand is overwritten ... thats why you loose your AD recovery.
REMEMBER - if you ever try WP7 and come back to Android dont forget youll need to task 29 (to clean out that nasty M$ dirt!), flash magLDR, flash recovery ( i usually stick with a 200 mb partition, as i usually run Hyperdroid, AND that way there are no worries about bad blocks), and then the rom.
although its not NECESSARY its recommended buuuut to avoid weird restarts, FCs, and any other random glitches that may occur down the short road ITS NECESSARY! :-D
good luck
hello everyone! I just installed android on my HTC HD2 successfully but when the phone reboot, shows me the MAGLDR says me that android booting from start and I have to setup android everytime I reboot the phone from the start. someone help me passing this step. thankyou in advance
Hey guys,
I'm having some trouble with CWM, as follows:
correct HSPL installed
Magldr 1.13 is installed
I install the latest version of CWM, and access it via AD recovery
It boots, getting the GOGOGO message and I enter the CWM menu
The problem:
Inside CWM any option I pick via the call button results in remaining stuck in a screen with the CWM hat in the middle of the screen. At this point, I have no choice but remove the battery.
For a long time I have ignored this problem and used DAF roms, but since such a method is pretty much dead, I have no choice but try and sort this out.
Any ideea why I get stuck on the CWM hat icon screen when I pick any option ?
Thank you.
have you reflashed the latest ver. of cwm i mean flash it again. its on the main screen in rom manager first option.
At this moment the phone is wiped clean via Task29, I have no rom installed and I have reinstalled CWM, Magldr and even HSPL multiple times with no luck, I'm afraid.
The CWM version I have installed is something along the lines of 4.0.0.1.0, or something.
check the md5 on the cwm it might be a bad dl also check the md5 on the rom
check what ver. android the two roms are, cwm 5.0.0.2 is my latest to work with android 2.3.5
I can't seem to find 5.0.0
Can you point me to a download link, pls ?
http://www.clockworkmod.com/
thats all i got for now i have t o try a different browser
all i got was ver 3.1.0.0 the md5 is 48f615587bbe3e19e28d88a2aa0bcec4
padibuz said:
Inside CWM any option I pick via the call button results in remaining stuck in a screen with the CWM hat in the middle of the screen.
Click to expand...
Click to collapse
just to double check, ,, , you sure that isn't the END key you're pressing? cos that happens with the end key....
it seems this happened
http://forum.xda-developers.com/showpost.php?p=10305205&postcount=3
Hi padibuz
a cousin of me has the same problem.
Could you solve this problem ?
Many thanks
This just happened to me, I flashed the whole setup many times but then cwr wouldn't see my files. After many attempts I manage to get it working. One thing thou, make sure the sdcard is in the phone while flashing CWR partition
Sent from my HTC HD2 using XDA Premium App
Hi there,
I haven't flashed a new Android ROM in a while on my good old HD2.
Things got changed...
I have magldr installed, and I also just installed CWM and seems to work fine too.
And I partitioned my SD card with a 1GB ext4 partition.
When I flashed a ROM in CWM, and I want to boot it, it keeps being stuck in the bootscreen of the ROM after magldr loaded it.
And yes, I have been waiting like 30 minutes, because I know the first boot takes a while, but not 30 minutes...
I have this issue with every Android ROM, and I am wondering what the problem could be, because I'm already struggling with this for lots of hours, but still haven't find any solution.
Windows Phone 7 via DAF.exe seems to work fine though, so my guess it that there is something wrong in partitions? but I am not sure at all.
I hope anyone could help me, I would really appreciate it.
Thanks in advance!
Joshoon
joshoon said:
Hi there,
I haven't flashed a new Android ROM in a while on my good old HD2.
Things got changed...
I have magldr installed, and I also just installed CWM and seems to work fine too.
And I partitioned my SD card with a 1GB ext4 partition.
When I flashed a ROM in CWM, and I want to boot it, it keeps being stuck in the bootscreen of the ROM after magldr loaded it.
And yes, I have been waiting like 30 minutes, because I know the first boot takes a while, but not 30 minutes...
I have this issue with every Android ROM, and I am wondering what the problem could be, because I'm already struggling with this for lots of hours, but still haven't find any solution.
Windows Phone 7 via DAF.exe seems to work fine though, so my guess it that there is something wrong in partitions? but I am not sure at all.
I hope anyone could help me, I would really appreciate it.
Thanks in advance!
Joshoon
Click to expand...
Click to collapse
I wrote a guide about all this is you're interested. Check it out and if you have questions let me know.
Sent from my HD2 using xda premium
did you flashed the correct CWM partition layout ? like for example
150MB System/5MB Cache after that u flash the rom ..
kylew1212 said:
I wrote a guide about all this is you're interested. Check it out and if you have questions let me know.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
But still I am wondering what I'm doing wrong in my progress.
_JaSoN_ said:
did you flashed the correct CWM partition layout ? like for example
150MB System/5MB Cache after that u flash the rom ..
Click to expand...
Click to collapse
Well I am not sure about that actually :O
I also tried a magldr partition of 445MB.
And I used the Recovery_400M.
But CWM looks to work fine.
I tried again.
Want to flash this ROM: http://forum.xda-developers.com/showthread.php?t=1275119
I made a 1GB ext4 partition before.
With HD2 ToolKit I made a 175MB System partition, and a 8MB cache size.
Guess what?
It seems that it's booting now
Still waiting till it's fully booted, but I'll keep you updated.
Thanks kylew1212, you made me understand the 5/175/8 formats.
By knowing this I actually succeeded now
joshoon said:
I tried again.
Want to flash this ROM: http://forum.xda-developers.com/showthread.php?t=1275119
I made a 1GB ext4 partition before.
With HD2 ToolKit I made a 175MB System partition, and a 8MB cache size.
Guess what?
It seems that it's booting now
Still waiting till it's fully booted, but I'll keep you updated.
Thanks kylew1212, you made me understand the 5/175/8 formats.
By knowing this I actually succeeded now
Click to expand...
Click to collapse
you also could have used this
EXT4 MGLDR Recovery for EU: cant post links
MD5: 41C21AF0968304C0DC3DA28B87FD2BC6
u flash this and after that u flash the rom
_JaSoN_ said:
you also could have used this
EXT4 MGLDR Recovery for EU: cant post links
MD5: 41C21AF0968304C0DC3DA28B87FD2BC6
u flash this and after that u flash the rom
Click to expand...
Click to collapse
I installed this http://forum.xda-developers.com/showthread.php?t=898913
You can do it yourself,open the recovery folder,right klick on flash.cfg,open with editor.Now you can change the values of "boot yboot", "system ya", "cache ya" how it is on the Discription for the rom you would to flash.Now you must save it.
That´s all !!
Plainy said:
You can do it yourself,open the recovery folder,right klick on flash.cfg,open with editor.Now you can change the values of "boot yboot", "system ya", "cache ya" how it is on the Discription for the rom you would to flash.Now you must save it.
That´s all !!
Click to expand...
Click to collapse
But for what is this?
Because I got the ROM fully working now with the way I described before.
I also get stuck on bootscreen with every rom that i flash with CWM.
Until i flashed a new kernel today i didnt have that problem (using ThypooN CM7). When it got stuck i did a task 29 to try and fix it.
Maybe i am missing something, this is what i do using HD2 Toolkit:
task 29
flash 2.15.50.14 radio (at first i didnt do that but i makes no difference)
install MAGLDR
install CWM
flash rom with CWM
I am using a 150/5 patiton for the ROM (recomemded in the OP), i also tried 160/10 but again it doesnt work.
CWM installs the zip normally. When i try to boot the rom it just gets stuck at bootscreen. I tried leaving it for 20 min and it still doesnt work.
I even installed wm6.5 and did the whole process of installing MAGLDR again to see if that helps but the same thing happens.
I also tried using cLK and got stuck again with every rom.
cLK, MAGLDR and CWM all work just fine, that is why i have no idea why the rom gets stuck at bootscreen.
It seems to me that the CWM doesnt install the rom corectly. The only rom that does work is AmeriCan Android becouse i doesnt need CWM.
Is there anything i can do to fix it?
Thanks
cicnabru said:
I also get stuck on bootscreen with every rom that i flash with CWM.
Until i flashed a new kernel today i didnt have that problem (using ThypooN CM7). When it got stuck i did a task 29 to try and fix it.
Maybe i am missing something, this is what i do using HD2 Toolkit:
task 29
flash 2.15.50.14 radio (at first i didnt do that but i makes no difference)
install MAGLDR
install CWM
flash rom with CWM
I am using a 150/5 patiton for the ROM (recomemded in the OP), i also tried 160/10 but again it doesnt work.
CWM installs the zip normally. When i try to boot the rom it just gets stuck at bootscreen. I tried leaving it for 20 min and it still doesnt work.
I even installed wm6.5 and did the whole process of installing MAGLDR again to see if that helps but the same thing happens.
I also tried using cLK and got stuck again with every rom.
cLK, MAGLDR and CWM all work just fine, that is why i have no idea why the rom gets stuck at bootscreen.
It seems to me that the CWM doesnt install the rom corectly. The only rom that does work is AmeriCan Android becouse i doesnt need CWM.
Is there anything i can do to fix it?
Thanks
Click to expand...
Click to collapse
I'm not sure what's going on. I've flashed many roms with cwm. Never a problem. However if you think cwm is your problem try another recovery, there are a few more available now. I've started using team win recovery project (twrp)
One other thing. It is not necessary to reflash the radio everytime. Once it is installed it does not uninstall unless you change to a different radio.
Sent from my HD2 using xda premium
I also flashed many roms with CWM and i never had a problem before.
Now i tried twrp with clk (clean install with task 29) and it flashes the rom normally. After i reboot i get the bootscreen, then i should get the boot animation and all i get is a black screen (the backlight is on). Few seconds later the phone vibrates like it booted but the screen is still black. If i restart the phone the same thing happens again.
I guess i'll have to use wp7
Thanks anyway
---------- Post added at 01:56 PM ---------- Previous post was at 01:14 PM ----------
I finally got it to work
It was the last thing i tried before flashing wp7. In wp7 OP it says that you have to install wm6.5, let it boot and then install MAGLDR. The important thing here is that you dont use task 29.
I installed wm6.5, let it boot, then install MAGLDR and CWM (without task 29) and now it works perfectly
cicnabru said:
I also flashed many roms with CWM and i never had a problem before.
Now i tried twrp with clk (clean install with task 29) and it flashes the rom normally. After i reboot i get the bootscreen, then i should get the boot animation and all i get is a black screen (the backlight is on). Few seconds later the phone vibrates like it booted but the screen is still black. If i restart the phone the same thing happens again.
I guess i'll have to use wp7
Thanks anyway
---------- Post added at 01:56 PM ---------- Previous post was at 01:14 PM ----------
I finally got it to work
It was the last thing i tried before flashing wp7. In wp7 OP it says that you have to install wm6.5, let it boot and then install MAGLDR. The important thing here is that you dont use task 29.
I installed wm6.5, let it boot, then install MAGLDR and CWM (without task 29) and now it works perfectly
Click to expand...
Click to collapse
Thanks for letting me know that. Other people are having trouble as well. I will update my guide to include this.
Sent from my HD2 using xda premium
Hey guys, I need some quick suggestions if anyone has it. Currently I have a non working phone.
I have been running an ICS NAND rom on my hd2 for a while now, havnt had any issues (a few niggles with the rom, nothing major) so I thought today I would update to the latest version.
I used the hd2toolkit to resize the partition to the biggest size it would allow, then used ad recovery to flash the new .zip to the nand. This is where my problems started, whenever i booted it just showed the boot animation, (I waited over an hour and pulled the battery out and re booted / reflashed a few times).
I found with a differnet rom i tried, pulling out the SD car would allow it to get to the welcome screen, but no screen input was accepted. I thought this was a bit weird but pushed on. I tried a different rom and it stated after flashing that it was optimising applications and looked like it was stuck in a boot loop. I did some reading up about it and found that task29 should help. I ran this but then all the phone would do is show the green HTC on the white background, it wouldnt let me to get into magdlr menu.
I then decided to to a full restore and go back to the wm rom from th HTC site (The australia telstra version), this seemed to flash on fine, but now I can not slide or click buttons in wm, no screen input is accepted. Which is strange as it was doing this in an android rom, as I mentioned previously.
Any ideas on how I can get touch working / get a NAND android rom to work again.
Thanks in advance guys
First verify that you have hspl installed by powering on while holding vol down button to get to bootloader screen
Go back to the hd2 nand toolkit
1.task29
2. Select either cLK repartition or Magldr repartition and select size for your rom (not the maximum size). 200 mb is fine for ics using sdext partition.
3.Select magldr update recovery or cLK install recovery depending on your selection above.
4. Reboot phone by pressing power and holding to get to magldr or power and home button to get to cwm recovery.
5. Install ICS from sd card as before
Thanks for the help, I had to flash a different radio version to get magdlr to boot.
I now have android running of my NAND, but the screen is non-responsive now, as it was yesterday.
I doubt it is hardware related, because I have never had an issue before yesterday when I wanted to change the android version, any ideas how I could get it working?
Make a backup and then repartition again using HD2 toolkit. Maybe you got a bad download or something. Seems simple but it does happen. To me if I didn't know you choose the biggest it would sound like the partition wasn't big enough. Maybe try a cyanogen ROM since it reguires very little partition size and report back if successful.
htccraze said:
Make a backup and then repartition again using HD2 toolkit. Maybe you got a bad download or something. Seems simple but it does happen. To me if I didn't know you choose the biggest it would sound like the partition wasn't big enough. Maybe try a cyanogen ROM since it reguires very little partition size and report back if successful.
Click to expand...
Click to collapse
I have tried two different android roms and the stock wm image from htc's site, all of which the screen doesn't work on. I will have a try with a cyanogen ROM and see if that makes a difference. Thanks
http://forum.xda-developers.com/showthread.php?t=769026
I just tried this rom and still no deal. This is very weird as I haven't had any issues with the screen at all, the phone is still in new physical condition.
Does anyone want to have a stab in the dark, as I really need to use it as a GPS tomorrow and any help would be appreciated.
Tell me what the steps you take to install a new ROM. Do you have MAGLDR or clk? Have you task29 yet? Are you sure your using the right partition? Are you using nand or sd Android?
If all else fails maybe check out this thread to reinstall
MAGLDR and then cwm. I've had problems in the past installing HyperDroid without
wiping my SD card first. Maybe check out this nand ROM instead or Coredroid found in my signature.
htccraze said:
Tell me what the steps you take to install a new ROM. Do you have MAGLDR or clk? Have you task29 yet? Are you sure your using the right partition? Are you using nand or sd Android?
If all else fails maybe check out this thread to reinstall
MAGLDR and then cwm. I've had problems in the past installing HyperDroid without
wiping my SD card first. Maybe check out this nand ROM instead or Coredroid found in my signature.
Click to expand...
Click to collapse
When installing a new rom, I have resized the magdlr partition, then copied the .zip to the sd card, then in ad recovery installed the zip through there. This has worked fine in the past. I followed the videos you have linked and I'm pretty sure I'm doing everything right and yes ive used task29 several times. In AD Recovery every time it states that installation has been successful. I have also formatted my SD card many times.
The ROM you linked, I can find download links on the page, not sure if I'm just missing them.
I just tried an SD card rom, its doing the same thing, no touch input is accepted.
Does NAND roms and SD roms not working imply that it could well be hardware? I just dont understand as it stopped working when I was reflashing yesterday and it was not dropped or roughly handled in anyway during this process.
I am now going to investigate MTTY (for bad blocks) and try reflashing back to original WM again. Please post more suggestions if anyone has them.
Another update: I just restored to default using the method listed below.
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
It took around 40-ish minutes and still no input from the screen, this is seriously frustrating.
WM boots fine and everything, but still no input is accepted.
I'm sorry to say but if your having the same problem with all that then it sounds like the digitizer stopped working. Maybe someone else knows something I don't so I would wait to see if they could help out.
Sent from my HTC HD2 using XDA
Thanks mate, I am not sure why it would have just stopped last night. Appreciate all the help! I'll see if anyone else has any suggestions.
It's not a problem. I do have to admit that it does seem pretty odd the timing of it. Hopefully it's a not the digitizer and someone would be able to point out what might be the cause of everything.
Sent from my HTC HD2 using XDA
This may seem a little crazy, but after having a search online about my issue, it seems that a ribbon going to the screen / digitizer is behind the power button on the HD2s, which apparently can get loose and after a sharp press of the button it started accepting screen input again!
The issue for me now is that when the power button it will stop accepting input again, untill I press it firmly again. I think I may need to open up the phone and check all the connections now.