Database Users

[Q] Troubles with HD2 - Typhoon ROM 3.3.3

Hi,
I have troubles with my HTC HD2.
Im trying to install this version
http://forum.xda-developers.com/showthread.php?t=933951
(25.May.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.3.3[2.3.4][A2SD][tytung r10]
This is my installation step by step.. So...
- Install HSPL 2.08
- Task29
- Radio
- Magldr 1.13
- CWM (3.0.2.5) 150MB
-partition SD Card 1024 and 0
-ext-sd format
- installation of the ROM
- fix permissions
- reboot
And my Android stuck at GO GO GO screen. I dont know what I have done badly, because if I use CWM 3.2.0.0 Android boots nicely, but I hear RoboVoice when I try to call. On the other hand if I try to install the old version of Android via CWM 3.0.2.5 everythink works. I mean the same version of Android but 3.0.6. - no RoboVoice, no bugs with falling applications.
I want to have updated system, but it is impossible for me and I dont know why.
So what is the problem?
thank you
Some details:
SD Card Kingston 8GB class 4
Windows 7 64-bit

maybe this will help ?
http://forum.xda-developers.com/showthread.php?t=945427

Yes, thank you.
But I think the problem is somewhere else. I really keep tutorials and manuals. The problem must be at version of Android. One big different between new and old version is AD Recovery CWM. For old it is for example 135MB, for new version it is 150MB. So I use 150MB as they write at thier thread and it is still not working.
If I use 3.2.0.0, Android(3.3.3) boots, but with bugs.. RoboVoice and so on..
If I use 3.0.2.5, Android freezes at GO GO GO.

Hey,double-confirm if u ain't flashing a CLK build as MAGLDR?
Try using this CWM flasher...it contains version 3.0.2.8...All u have to do is connect phone 2 pc in usb flasher mode (MAGLDR), run the setup.exe as admin, select 150MB partition, flash away...
Alternatively u can just copy out the recovery-raw.img file out and use it 2 replace the recovery-raw.img in the official 3.0.2.5 folder which was recommended in the ROM thread and flash away...
P.S. Try both methods first (performing a task29 each time) and if it still doesn't help then its best to seek help in the ROM's thread...Get help from its users.

MAGLDR of course
Ill try CWM 3.0.2.8. Thank You

99TheDude99 said:
Yes, thank you.
But I think the problem is somewhere else. I really keep tutorials and manuals. The problem must be at version of Android. One big different between new and old version is AD Recovery CWM. For old it is for example 135MB, for new version it is 150MB. So I use 150MB as they write at thier thread and it is still not working.
If I use 3.2.0.0, Android(3.3.3) boots, but with bugs.. RoboVoice and so on..
If I use 3.0.2.5, Android freezes at GO GO GO.
Click to expand...
Click to collapse
First of all are you using cLK or MGLDR?
For robo voice, it is only on the first call, just reboot, call anyone or any number and just hit end call.
If you have GO GO GO screen, you are using MGLDR, so why are you repartitioning your ROM? The MGLDR, already comes with its own partition built in, no need to change anything.

Im using MAGLDR, not cLK.
Ill try your tips, so wait for my report
And what about falling applications?
I click on Internet application or Facebook app. Maybe 3 seconds it works then falls to Home Screen. Thank You

I have used CWM 3028. The problem with RoboVoice is resolved.
However, I have troubles with applications. Internet, Facebook etc.... still falling when I click on them. But at version 3.0.6 everthing works OK.
I dont know why ..
I tried everything

[Q] Magldr no boot source

Someone please help me!! Before all i problems my phone kept freezing in boot and i tried everything by cleaning my sd, ad hard reset and changing builds and the same boot freeze kept happening. So after getting tired of that and having to hard reset everyday i eventually flashed TMOUS stock rom then after tried to do the magldr 113 isntall. I got magldr installed on my phone and then i choose the ad recovery. When i do i get this message "no boot source". I tried looking up on these forums and can't find anything to fix my problems. Someone please help me with a step-by-step guide. I don't want to own an hd2 running the crummy wm6.5 :/ I NEED ANDROID

download hd2 toolkit. afterward install magldr update recovery, follow the prompts to install and your done. in a nutshell...you were missing clockwork recovery. let me know if this helps

danielfc741 said:
Someone please help me!! Before all i problems my phone kept freezing in boot and i tried everything by cleaning my sd, ad hard reset and changing builds and the same boot freeze kept happening. So after getting tired of that and having to hard reset everyday i eventually flashed TMOUS stock rom then after tried to do the magldr 113 isntall. I got magldr installed on my phone and then i choose the ad recovery. When i do i get this message "no boot source". I tried looking up on these forums and can't find anything to fix my problems. Someone please help me with a step-by-step guide. I don't want to own an hd2 running the crummy wm6.5 :/ I NEED ANDROID
Click to expand...
Click to collapse
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed

gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
YOU SIR ARE GREAT!!! thanks so much!!!!! i can now use android! im glad it works.

Welcome...glad it worked
Sent from my HTC HD2 using XDA App

gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
Great ! I will try it out as well. I have been getting this error for the last few times. I am not sure why this happened.
I installed a WP7 rom and then went back to android (hopeless battery drain with my SD card ... not sure if I can ever do something about that). I could not get back to AD recovery.
Thanks again !

gprash said:
Great ! I will try it out as well. I have been getting this error for the last few times. I am not sure why this happened.
I installed a WP7 rom and then went back to android (hopeless battery drain with my SD card ... not sure if I can ever do something about that). I could not get back to AD recovery.
Thanks again !
Click to expand...
Click to collapse
If you loaded WP7 it may have locked your SD Card - need to format in a Nokia phone. Or reduced the usable size to 200mb - this can be fixed with a partitioning tool from PC

when go back and forth between WP7 and Android the nand is overwritten ... thats why you loose your AD recovery.
REMEMBER - if you ever try WP7 and come back to Android dont forget youll need to task 29 (to clean out that nasty M$ dirt!), flash magLDR, flash recovery ( i usually stick with a 200 mb partition, as i usually run Hyperdroid, AND that way there are no worries about bad blocks), and then the rom.
although its not NECESSARY its recommended buuuut to avoid weird restarts, FCs, and any other random glitches that may occur down the short road ITS NECESSARY! :-D
good luck

hello everyone! I just installed android on my HTC HD2 successfully but when the phone reboot, shows me the MAGLDR says me that android booting from start and I have to setup android everytime I reboot the phone from the start. someone help me passing this step. thankyou in advance

Every Android ROM stuck in bootscreen

Hi there,
I haven't flashed a new Android ROM in a while on my good old HD2.
Things got changed...
I have magldr installed, and I also just installed CWM and seems to work fine too.
And I partitioned my SD card with a 1GB ext4 partition.
When I flashed a ROM in CWM, and I want to boot it, it keeps being stuck in the bootscreen of the ROM after magldr loaded it.
And yes, I have been waiting like 30 minutes, because I know the first boot takes a while, but not 30 minutes...
I have this issue with every Android ROM, and I am wondering what the problem could be, because I'm already struggling with this for lots of hours, but still haven't find any solution.
Windows Phone 7 via DAF.exe seems to work fine though, so my guess it that there is something wrong in partitions? but I am not sure at all.
I hope anyone could help me, I would really appreciate it.
Thanks in advance!
Joshoon

joshoon said:
Hi there,
I haven't flashed a new Android ROM in a while on my good old HD2.
Things got changed...
I have magldr installed, and I also just installed CWM and seems to work fine too.
And I partitioned my SD card with a 1GB ext4 partition.
When I flashed a ROM in CWM, and I want to boot it, it keeps being stuck in the bootscreen of the ROM after magldr loaded it.
And yes, I have been waiting like 30 minutes, because I know the first boot takes a while, but not 30 minutes...
I have this issue with every Android ROM, and I am wondering what the problem could be, because I'm already struggling with this for lots of hours, but still haven't find any solution.
Windows Phone 7 via DAF.exe seems to work fine though, so my guess it that there is something wrong in partitions? but I am not sure at all.
I hope anyone could help me, I would really appreciate it.
Thanks in advance!
Joshoon
Click to expand...
Click to collapse
I wrote a guide about all this is you're interested. Check it out and if you have questions let me know.
Sent from my HD2 using xda premium

did you flashed the correct CWM partition layout ? like for example
150MB System/5MB Cache after that u flash the rom ..

kylew1212 said:
I wrote a guide about all this is you're interested. Check it out and if you have questions let me know.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
But still I am wondering what I'm doing wrong in my progress.
_JaSoN_ said:
did you flashed the correct CWM partition layout ? like for example
150MB System/5MB Cache after that u flash the rom ..
Click to expand...
Click to collapse
Well I am not sure about that actually :O
I also tried a magldr partition of 445MB.
And I used the Recovery_400M.
But CWM looks to work fine.

I tried again.
Want to flash this ROM: http://forum.xda-developers.com/showthread.php?t=1275119
I made a 1GB ext4 partition before.
With HD2 ToolKit I made a 175MB System partition, and a 8MB cache size.
Guess what?
It seems that it's booting now
Still waiting till it's fully booted, but I'll keep you updated.
Thanks kylew1212, you made me understand the 5/175/8 formats.
By knowing this I actually succeeded now

joshoon said:
I tried again.
Want to flash this ROM: http://forum.xda-developers.com/showthread.php?t=1275119
I made a 1GB ext4 partition before.
With HD2 ToolKit I made a 175MB System partition, and a 8MB cache size.
Guess what?
It seems that it's booting now
Still waiting till it's fully booted, but I'll keep you updated.
Thanks kylew1212, you made me understand the 5/175/8 formats.
By knowing this I actually succeeded now
Click to expand...
Click to collapse
you also could have used this
EXT4 MGLDR Recovery for EU: cant post links
MD5: 41C21AF0968304C0DC3DA28B87FD2BC6
u flash this and after that u flash the rom

_JaSoN_ said:
you also could have used this
EXT4 MGLDR Recovery for EU: cant post links
MD5: 41C21AF0968304C0DC3DA28B87FD2BC6
u flash this and after that u flash the rom
Click to expand...
Click to collapse
I installed this http://forum.xda-developers.com/showthread.php?t=898913

You can do it yourself,open the recovery folder,right klick on flash.cfg,open with editor.Now you can change the values of "boot yboot", "system ya", "cache ya" how it is on the Discription for the rom you would to flash.Now you must save it.
That´s all !!

Plainy said:
You can do it yourself,open the recovery folder,right klick on flash.cfg,open with editor.Now you can change the values of "boot yboot", "system ya", "cache ya" how it is on the Discription for the rom you would to flash.Now you must save it.
That´s all !!
Click to expand...
Click to collapse
But for what is this?
Because I got the ROM fully working now with the way I described before.

I also get stuck on bootscreen with every rom that i flash with CWM.
Until i flashed a new kernel today i didnt have that problem (using ThypooN CM7). When it got stuck i did a task 29 to try and fix it.
Maybe i am missing something, this is what i do using HD2 Toolkit:
task 29
flash 2.15.50.14 radio (at first i didnt do that but i makes no difference)
install MAGLDR
install CWM
flash rom with CWM
I am using a 150/5 patiton for the ROM (recomemded in the OP), i also tried 160/10 but again it doesnt work.
CWM installs the zip normally. When i try to boot the rom it just gets stuck at bootscreen. I tried leaving it for 20 min and it still doesnt work.
I even installed wm6.5 and did the whole process of installing MAGLDR again to see if that helps but the same thing happens.
I also tried using cLK and got stuck again with every rom.
cLK, MAGLDR and CWM all work just fine, that is why i have no idea why the rom gets stuck at bootscreen.
It seems to me that the CWM doesnt install the rom corectly. The only rom that does work is AmeriCan Android becouse i doesnt need CWM.
Is there anything i can do to fix it?
Thanks

cicnabru said:
I also get stuck on bootscreen with every rom that i flash with CWM.
Until i flashed a new kernel today i didnt have that problem (using ThypooN CM7). When it got stuck i did a task 29 to try and fix it.
Maybe i am missing something, this is what i do using HD2 Toolkit:
task 29
flash 2.15.50.14 radio (at first i didnt do that but i makes no difference)
install MAGLDR
install CWM
flash rom with CWM
I am using a 150/5 patiton for the ROM (recomemded in the OP), i also tried 160/10 but again it doesnt work.
CWM installs the zip normally. When i try to boot the rom it just gets stuck at bootscreen. I tried leaving it for 20 min and it still doesnt work.
I even installed wm6.5 and did the whole process of installing MAGLDR again to see if that helps but the same thing happens.
I also tried using cLK and got stuck again with every rom.
cLK, MAGLDR and CWM all work just fine, that is why i have no idea why the rom gets stuck at bootscreen.
It seems to me that the CWM doesnt install the rom corectly. The only rom that does work is AmeriCan Android becouse i doesnt need CWM.
Is there anything i can do to fix it?
Thanks
Click to expand...
Click to collapse
I'm not sure what's going on. I've flashed many roms with cwm. Never a problem. However if you think cwm is your problem try another recovery, there are a few more available now. I've started using team win recovery project (twrp)
One other thing. It is not necessary to reflash the radio everytime. Once it is installed it does not uninstall unless you change to a different radio.
Sent from my HD2 using xda premium

I also flashed many roms with CWM and i never had a problem before.
Now i tried twrp with clk (clean install with task 29) and it flashes the rom normally. After i reboot i get the bootscreen, then i should get the boot animation and all i get is a black screen (the backlight is on). Few seconds later the phone vibrates like it booted but the screen is still black. If i restart the phone the same thing happens again.
I guess i'll have to use wp7
Thanks anyway
---------- Post added at 01:56 PM ---------- Previous post was at 01:14 PM ----------
I finally got it to work
It was the last thing i tried before flashing wp7. In wp7 OP it says that you have to install wm6.5, let it boot and then install MAGLDR. The important thing here is that you dont use task 29.
I installed wm6.5, let it boot, then install MAGLDR and CWM (without task 29) and now it works perfectly

cicnabru said:
I also flashed many roms with CWM and i never had a problem before.
Now i tried twrp with clk (clean install with task 29) and it flashes the rom normally. After i reboot i get the bootscreen, then i should get the boot animation and all i get is a black screen (the backlight is on). Few seconds later the phone vibrates like it booted but the screen is still black. If i restart the phone the same thing happens again.
I guess i'll have to use wp7
Thanks anyway
---------- Post added at 01:56 PM ---------- Previous post was at 01:14 PM ----------
I finally got it to work
It was the last thing i tried before flashing wp7. In wp7 OP it says that you have to install wm6.5, let it boot and then install MAGLDR. The important thing here is that you dont use task 29.
I installed wm6.5, let it boot, then install MAGLDR and CWM (without task 29) and now it works perfectly
Click to expand...
Click to collapse
Thanks for letting me know that. Other people are having trouble as well. I will update my guide to include this.
Sent from my HD2 using xda premium

[Q] No screen input from android / wm

Hey guys, I need some quick suggestions if anyone has it. Currently I have a non working phone.
I have been running an ICS NAND rom on my hd2 for a while now, havnt had any issues (a few niggles with the rom, nothing major) so I thought today I would update to the latest version.
I used the hd2toolkit to resize the partition to the biggest size it would allow, then used ad recovery to flash the new .zip to the nand. This is where my problems started, whenever i booted it just showed the boot animation, (I waited over an hour and pulled the battery out and re booted / reflashed a few times).
I found with a differnet rom i tried, pulling out the SD car would allow it to get to the welcome screen, but no screen input was accepted. I thought this was a bit weird but pushed on. I tried a different rom and it stated after flashing that it was optimising applications and looked like it was stuck in a boot loop. I did some reading up about it and found that task29 should help. I ran this but then all the phone would do is show the green HTC on the white background, it wouldnt let me to get into magdlr menu.
I then decided to to a full restore and go back to the wm rom from th HTC site (The australia telstra version), this seemed to flash on fine, but now I can not slide or click buttons in wm, no screen input is accepted. Which is strange as it was doing this in an android rom, as I mentioned previously.
Any ideas on how I can get touch working / get a NAND android rom to work again.
Thanks in advance guys

First verify that you have hspl installed by powering on while holding vol down button to get to bootloader screen
Go back to the hd2 nand toolkit
1.task29
2. Select either cLK repartition or Magldr repartition and select size for your rom (not the maximum size). 200 mb is fine for ics using sdext partition.
3.Select magldr update recovery or cLK install recovery depending on your selection above.
4. Reboot phone by pressing power and holding to get to magldr or power and home button to get to cwm recovery.
5. Install ICS from sd card as before

Thanks for the help, I had to flash a different radio version to get magdlr to boot.
I now have android running of my NAND, but the screen is non-responsive now, as it was yesterday.
I doubt it is hardware related, because I have never had an issue before yesterday when I wanted to change the android version, any ideas how I could get it working?

Make a backup and then repartition again using HD2 toolkit. Maybe you got a bad download or something. Seems simple but it does happen. To me if I didn't know you choose the biggest it would sound like the partition wasn't big enough. Maybe try a cyanogen ROM since it reguires very little partition size and report back if successful.

htccraze said:
Make a backup and then repartition again using HD2 toolkit. Maybe you got a bad download or something. Seems simple but it does happen. To me if I didn't know you choose the biggest it would sound like the partition wasn't big enough. Maybe try a cyanogen ROM since it reguires very little partition size and report back if successful.
Click to expand...
Click to collapse
I have tried two different android roms and the stock wm image from htc's site, all of which the screen doesn't work on. I will have a try with a cyanogen ROM and see if that makes a difference. Thanks

http://forum.xda-developers.com/showthread.php?t=769026
I just tried this rom and still no deal. This is very weird as I haven't had any issues with the screen at all, the phone is still in new physical condition.
Does anyone want to have a stab in the dark, as I really need to use it as a GPS tomorrow and any help would be appreciated.

Tell me what the steps you take to install a new ROM. Do you have MAGLDR or clk? Have you task29 yet? Are you sure your using the right partition? Are you using nand or sd Android?
If all else fails maybe check out this thread to reinstall
MAGLDR and then cwm. I've had problems in the past installing HyperDroid without
wiping my SD card first. Maybe check out this nand ROM instead or Coredroid found in my signature.

htccraze said:
Tell me what the steps you take to install a new ROM. Do you have MAGLDR or clk? Have you task29 yet? Are you sure your using the right partition? Are you using nand or sd Android?
If all else fails maybe check out this thread to reinstall
MAGLDR and then cwm. I've had problems in the past installing HyperDroid without
wiping my SD card first. Maybe check out this nand ROM instead or Coredroid found in my signature.
Click to expand...
Click to collapse
When installing a new rom, I have resized the magdlr partition, then copied the .zip to the sd card, then in ad recovery installed the zip through there. This has worked fine in the past. I followed the videos you have linked and I'm pretty sure I'm doing everything right and yes ive used task29 several times. In AD Recovery every time it states that installation has been successful. I have also formatted my SD card many times.
The ROM you linked, I can find download links on the page, not sure if I'm just missing them.
I just tried an SD card rom, its doing the same thing, no touch input is accepted.
Does NAND roms and SD roms not working imply that it could well be hardware? I just dont understand as it stopped working when I was reflashing yesterday and it was not dropped or roughly handled in anyway during this process.
I am now going to investigate MTTY (for bad blocks) and try reflashing back to original WM again. Please post more suggestions if anyone has them.

Another update: I just restored to default using the method listed below.
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
It took around 40-ish minutes and still no input from the screen, this is seriously frustrating.
WM boots fine and everything, but still no input is accepted.

I'm sorry to say but if your having the same problem with all that then it sounds like the digitizer stopped working. Maybe someone else knows something I don't so I would wait to see if they could help out.
Sent from my HTC HD2 using XDA

Thanks mate, I am not sure why it would have just stopped last night. Appreciate all the help! I'll see if anyone else has any suggestions.

It's not a problem. I do have to admit that it does seem pretty odd the timing of it. Hopefully it's a not the digitizer and someone would be able to point out what might be the cause of everything.
Sent from my HTC HD2 using XDA

This may seem a little crazy, but after having a search online about my issue, it seems that a ribbon going to the screen / digitizer is behind the power button on the HD2s, which apparently can get loose and after a sharp press of the button it started accepting screen input again!
The issue for me now is that when the power button it will stop accepting input again, untill I press it firmly again. I think I may need to open up the phone and check all the connections now.

Problems with loading Clockwork mod and roms

Hello xda members i want to install an android rom on my hd2, as after i got the screen fixed it lost the rom I had installed and yhen i could not install new ones.. So followed instructions below and got stuck on the second paragraph
Connect the device to the USB port
Put the device into factory flash mode by booting it while pressing "volume down"
Install HSPL using the "Install HSPL" function inside HD2ToolKit - MAGLDR: Android / WP7 supports 2.08 ONLY!
Put the device into factory flash mode by booting it while pressing "volume down"
Do "Task29" (aka Complete Wipe) using the "Wipe (Task29)" function inside HD2ToolKit
Put the device into factory flash mode by booting it while pressing "volume down"
Install Latest Radio Firmware using the "Install Custom NBH/NB RUU" function inside HD2ToolKit - HD2 Radios
Put the device into factory flash mode by booting it while pressing "volume down"
Install Latest MAGLDR using the "Install MAGLDR" function inside HD2ToolKit
Boot into MAGLDR recovery menu by pressing the "shutdown/hangup" button while booting up
Choose "USB Flasher"
Click to expand...
Click to collapse
The above all appeared to work and go well
Flash the Latest CWR (Clockwork Recovery) with the appropriate partition sizes by using the "Repartition" button inside the HD2ToolKit: System: 200MB | Cache: 5MB
Boot into MAGLDR recovery menu by pressing the "shutdown/hangup" button while booting up
Insert MicroSD card with the ROM ZIP
Choose "AD Recovery"
Flash ROM ZIP
Reboot
Click to expand...
Click to collapse
Okay the problem is CWR (i downloaded the 150mb version as thought that will work with the rom) It will not install properly and I can not load the CWR menu up. 8. 'AD recovery' states in red "No sources".
Another error message I got is when I first start my phone I get this "Nand Kernal open failed"
Please help me I need to get this fixed as the phone is a present for someone.

Did you use the repartition option in the toolkit or you downloaded a separate package?
Use the option in the tool, and make sure you select the sizes according to the ROM you want to install.
Of course the device would say nand kernel failure, there is nothing in the device. After installing the recovery you need to flash a ROM, obviously.
Sent from my NexusHD2 using xda app-developers app

Marvlesz said:
Did you use the repartition option in the toolkit or you downloaded a separate package?
Use the option in the tool, and make sure you select the sizes according to the ROM you want to install.
Of course the device would say nand kernel failure, there is nothing in the device. After installing the recovery you need to flash a ROM, obviously.
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
Thanks for getting back to me,
This is the rom i tried to install but any rom will be fine to be honest!
[17.DEC.2012║ROM] myMIUI 15 B5 [MAGLDR/CLK║Dorimanx║GB║myMIUI IDE©║zipA║MultiLang]
So i did a wipe 29 again, the radio is Radio-Leo-2.15.50.14 and i googled it to download,
just to make sure the repartition was done from the HD2 tool, all stages complete and repartitioned to rom specs 200mb and 5mb cache, so repartition from HD2 tool installs cwmod then?
8. AD Recovery - still stuck saying gogogo..

Which radio do you have installed?

Marvlesz said:
Which radio do you have installed?
Click to expand...
Click to collapse
Radio-Leo-2.15.50.14 I dont know if your supposed to see the radio show up on one of the screens in magldr or hspl? but i've not seen anything that shows the radio loaded other than "success" after the initial installation.
It was installed through HD2 toolkit after extracting the two files to desktop.
Also I downloaded the radio from file sharing website after I googled it as the links on xda were no longer working.
thanks,

Well, I am sorry but I am no expert in MAGLDR. All I know is that the infamous Stuck @ GOx3 had been fixed in MAGLDR v1.13.
If you already have v1.13, I am at the limit of my knowledge, sorry.
You could try to re-install though.

Marvlesz said:
Well, I am sorry but I am no expert in MAGLDR. All I know is that the infamous Stuck @ GOx3 had been fixed in MAGLDR v1.13.
If you already have v1.13, I am at the limit of my knowledge, sorry.
You could try to re-install though.
Click to expand...
Click to collapse
Okay mate thanks for your help anyway it was nice of you to take the time to try to help me .
I hope someone else on these forums will help me, I guess i can still go back to the old windows 6.5. I read someone else had similar problem and ended up going back to 6.5. It's a shame because i was giving the phone as a present and wanted it in good working order with android or at least the new windows mobile system..
Maybe the old methods of installing android on the SD card without magldr would work, I would need to find the posts with guides for that as it was such a long time ago when I went through those instructions I really cant remember.

repartition again, if it not work, try this way
gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
that's all I can help

You know, you could hit the thanks button for Marvlesz
Anyway, I can't see where you're going wrong here. All your steps are (as far as I can see) perfectly fine. Just to double check, you have:
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.13
CWM (from the Toolkit)
right? If so, everything should theoretically work correctly. Try downloading an older CWM version such as the one from the guide in my sig and flashing that instead.

Thankyou tried that tin1203 and I found the 250mb and 400mb (old version) but couldn't download the 150mb version..Links dead
Still stuck on 8.AD recovery.
However instead of being stuck on gogogo, AD recovery simply stated "No Boot sources"
Anything else I can try? Or know a guide to at least get the phone back to working in some form? Cheers

Nigeldg said:
You know, you could hit the thanks button for Marvlesz
Anyway, I can't see where you're going wrong here. All your steps are (as far as I can see) perfectly fine. Just to double check, you have:
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.13
CWM (from the Toolkit)
right? If so, everything should theoretically work correctly. Try downloading an older CWM version such as the one from the guide in my sig and flashing that instead.
Click to expand...
Click to collapse
Yep HSPL 2.08 installed
Now how would i check the Radio? Install it again and receive confirmation once installed? Or is there another way to check?
MAGLDR 1.13 is installed
CWM from the toolkit will not load up - when installing it everything appears to work and install fine ( no errors etc) However 8. Ad recovery will not load up.
Anything else i can do to at least get the phone operational.

To check the radio, turn your phone off then on again. While it's booting up (on the first splashscreen) three lines of text will appear. The top one is something like R: 2.15.50.14 (or whatever radio you have, obviously) so try checking that line and making sure that it's a .50 radio. If it is, then everything worked fine when you flashed the radio. Also try the CWM version from the guide in my sig, it's supposed to be one of the most stable versions I think.

Hey i think i know what your problem is and since it's a present i hope that will work...there are two types of recoveries...the ones flashed on nand that can be booted from 8.ad recovery...and the ones flashed on the sd that can be booted from the 3rd option of mgldr..i think is called 3.ad sd..i really hope this will help!

eliaskammas said:
Hey i think i know what your problem is and since it's a present i hope that will work...there are two types of recoveries...the ones flashed on nand that can be booted from 8.ad recovery...and the ones flashed on the sd that can be booted from the 3rd option of mgldr..i think is called 3.ad sd..i really hope this will help!
Click to expand...
Click to collapse
Thanks for the help guys, after my previous post I decided to try installing windows 7 and all went well in terms of flashing the rom however although it appears to have loaded I have no touch screen, its completely not working
This could be due to windows 7 software or when it got fixed as I not used the touch screen since..

Oyeah thanks for helping, just need to get someone to fix the touch screen i guess.

It would be better for you if you install cwr from toolkit, just select the partition size(magldr repartition) for eg. 150 like you want and you'll get cwr v5.0.2.6.. Those recoveries that you're downloading from guide suck, didn't work for me too(ok, they worked but I couldn't flash anything even if I downloaded the 400 one).. Recommended.
EDIT: Sorry, haven't seen the second page of the thread where you already mentioned that cwr from toolkit won't boot.

Shaumaaa said:
It would be better for you if you install cwr from toolkit, just select the partition size(magldr repartition) for eg. 150 like you want and you'll get cwr v5.0.2.6.. Those recoveries that you're downloading from guide suck, didn't work for me too(ok, they worked but I couldn't flash anything even if I downloaded the 400 one).. Recommended.
EDIT: Sorry, haven't seen the second page of the thread where you already mentioned that cwr from toolkit won't boot.
Click to expand...
Click to collapse
Yeah thanks I really tried a lot of stuff and I know the basics been flashing since HD2 came out, I ended up flashing new windows and it actually loaded up but then guess what? The touch screen is not responding, ill be taking it back to where I got that fixed to complain.