Related
I have read and tried anything I could think of here.
I have downloaded RC29
Extracted the file to SD ccard formated to FAT32
Started up in Bootloader
Phone found the file and successfully installed
Pressed action button to reboot.
Stays in Tri color screen
I have tried the soft reset, but I am still stuck at the G1 screen.
I am not new to flashing and recovery, only to the G1. What am I missing?
Does it reboot and return to the tri-color screen, or not reboot at all? Did you try taking the sd card out and then rebooting?
The same thing happened to me, I downloaded rc29 to root my phone so I did the rooting and then I wanted to install the JF Rc33 update so I tried rebooting in recoveyr mode to install the update and my phone just got stuck in the G1 logo. It works on normal reboot but not in tecovery mode or when I press camera & power it takes me to a white screen with green letters and the little green android guy..... how can I fix that? I want the jf update. Is there any way of installing it without having to use recovery mode? Or is there anyway to fix recovery mode?
danguyf,
Thanks.
I just redid the RC29 boot off the SD card. Just to rule out some more issues, I formatted the card again (512mb Sandisk).
As soon as I hit the action button, I get the tri color bootloader screen.
I have tried:
removing the SD card PRIOR to pressing the action button
removing the SD card PRIOR to a soft boot (call, end menu).
I have been using a fully charged battery.
wpr said:
danguyf,
Thanks.
I just redid the RC29 boot off the SD card. Just to rule out some more issues, I formatted the card again (512mb Sandisk).
As soon as I hit the action button, I get the tri color bootloader screen.
I have tried:
removing the SD card PRIOR to pressing the action button
removing the SD card PRIOR to a soft boot (call, end menu).
I have been using a fully charged battery.
Click to expand...
Click to collapse
Looks like you dont have rootacces, try this http://www.multigesture.net/articles/t-mobile-g1-downgrade-rc30rc8-rooting-update-tutorial/
Thanks. Gotta learn a new OS!
I will give this a try in a few and report back.
Oke good luck !
You need a WM phone to make a Goldcard and Qmat 2.24 if you use Windows.
Ronnymes said:
Oke good luck !
You need a WM phone to make a Goldcard and Qmat 2.24 if you use Windows.
Click to expand...
Click to collapse
Thanks. I might need more than luck.
What is Qmat 2.24? Boy I hate feeling stupid!
wpr said:
Thanks. I might need more than luck.
What is Qmat 2.24? Boy I hate feeling stupid!
Click to expand...
Click to collapse
Try google
wpr said:
I have read and tried anything I could think of here.
I have downloaded RC29
Extracted the file to SD ccard formated to FAT32
Started up in Bootloader
Phone found the file and successfully installed
Pressed action button to reboot.
Stays in Tri color screen
I have tried the soft reset, but I am still stuck at the G1 screen.
I am not new to flashing and recovery, only to the G1. What am I missing?
Click to expand...
Click to collapse
Just so we are clear, these are the steps you followed???
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
The phone is not mine. It came in to us to recover. It came in frozen on the G1 screen, so I cannot perform these 2 steps:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
It does charge via USB and AC.
It is now powered up and frozen, but XP does find the Android phone and it shows up as a disk drive in device manager.
First off, who froze it?
Secondly, does the phone get to the homescreen?
The user brought it in at the G1 screen.
That is as far as it gets in power up.
wpr said:
The user brought it in at the G1 screen.
That is as far as it gets in power up.
Click to expand...
Click to collapse
i hope you have a computer and either an extra mini sdcard *1MB in size* handy, or a mini sd card reader handy.
format the card, fat32.
download the rom from here. *scroll down to downloads section and pick the appropriate one. rc-33 U.S. RC-9 U.K. ADP unbranded*
if it's already named update, transfer it to the card, if not rename it update, then transfer it to the card.
After it has been transferred.
place the card back into the phone. start the phone up holding home and end key till it enters the recovery mode.
you should see a list of commands with a leopard looking-like screen.
hit alt-w
then alt-s
after it is complete, hit back+home to reboot again.
Just wanted to follow up annd say thanks to everyone for the help. I did not get a chance to deal with it today, but I will post the outcome.
I have the same problam too.
I have JF 1.1 Holidey version and when I try to update it to jf1.5 it gets stuck on the G1 logo, I tried using differnet updates to and differnt sd cards
and even tried the JF updater and it dosent work, I'm a bit frustrated, my brother rooted the phone for and installed the RC29 rom and the JF rom,
it offered me a system holiday update awaile ago and when I updated it froze on the G1 logo after I waited a long time (about 45 min) I removed the battery and started the phone again.. then I saw about 35MB free space (before I had only 10MB) and I think that from that point it added the holiday but I'm not sure if it wasn't already before that.. I realy need your halp with this.. I can't find a way to boot my phone and start a bootloader..
p.s. I was able to get to the fast boot when I press the power + Camera but I don't know how to use it..
Follow the same directions in post 14 =)
Mikey1022 said:
Follow the same directions in post 14 =)
Click to expand...
Click to collapse
I have a big problem!
MY G1 is still Frozen on G1 splash
I don't have access to the recovery mode (power+home), or fastboot mode (cam+power)...just show G1 logo...for hours!!!
Any idea?
I need to access to any mode to try to rescue my phone...
It is the second phone rooted by me, but I don't know what happened =(
thanks for the quickly answers!
No update
Mikey1022 said:
i hope you have a computer and either an extra mini sdcard *1MB in size* handy, or a mini sd card reader handy.
format the card, fat32.
download the rom from here. *scroll down to downloads section and pick the appropriate one. rc-33 U.S. RC-9 U.K. ADP unbranded*
if it's already named update, transfer it to the card, if not rename it update, then transfer it to the card.
After it has been transferred.
place the card back into the phone. start the phone up holding home and end key till it enters the recovery mode.
you should see a list of commands with a leopard looking-like screen.
hit alt-w
then alt-s
after it is complete, hit back+home to reboot again.
Click to expand...
Click to collapse
And what about if the screen says:
Finding update package..
Opening update package..
E: Can`t open /sdcard/update.zip
(No such file or directory)
Installion aborted.
G1 homescreen freeze
Hi,
I have a G1, installed hero-rom from xda(Jacheroski 2.0). I found it pretty annoying because the phone was very slow etc. So i tried to go back to the almost original software.
1. started G1 in recovery mode(Home+power), alt+x, adb shell, #parted /dev/block/mmcblk0, mklabel msdos, Y, rm1, rm2, mkpartsfs, primary, fat32, 0, 8000(8 gb card), shut down G1.
Downloaded:
- Radio (from htc support)
- SPL (from xda)
- Rom (from htc support)
Copied those files to my SD.
2. started my G1 in recoverymode(Home+power), wipe, apply any zip from SD,
First installed Radio = succesful
Tried to install SPL:got an error in line.
So thought that I first need to reboot my G1(because of the radio)
I rebooted my G1. got a installation screen. then I restarted my G1 and wanted to go to recovery mode to install spl and rom. It was frozen on the homescreen. I can't do any thing. not recovery not the other one(camera+power)
Any advice?
Recently I installed Advance launcher on my phone in an effort to chase away the 'oh no I may never get 2.2 oh god why' blues. Unfortunately, I'm now stuck in a force close loop. Here's what I've tried so far
1) Attempt to boot phone in safe mode. It automatically reboots itself back into normal mode within about 15 seconds of uptime. I've yet to be able to make it past the unlock screen
2) Use SEUS to flash the firmware back to defaults. Thus far, ive only used it on a windows seven machine. I'm allowed to make it to the point where it instructs me to connect the phone in flashing mode, however the phone is not recognized. I'll be trying it on a different OS tonite, however I'm concerned that this isnt going to do anything as most folks having issues with SEUS on win7 have been unable to make it past the loading screen at all, let alone phone selection and the connection screen.
Any suggestions as to the next course of action I'm to take? Using an X10a locked to Rogers Wireless. Thanks for your time
DerekGrant2 said:
Recently I installed Advance launcher on my phone in an effort to chase away the 'oh no I may never get 2.2 oh god why' blues. Unfortunately, I'm now stuck in a force close loop. Here's what I've tried so far
1) Attempt to boot phone in safe mode. It automatically reboots itself back into normal mode within about 15 seconds of uptime. I've yet to be able to make it past the unlock screen
2) Use SEUS to flash the firmware back to defaults. Thus far, ive only used it on a windows seven machine. I'm allowed to make it to the point where it instructs me to connect the phone in flashing mode, however the phone is not recognized. I'll be trying it on a different OS tonite, however I'm concerned that this isnt going to do anything as most folks having issues with SEUS on win7 have been unable to make it past the loading screen at all, let alone phone selection and the connection screen.
Any suggestions as to the next course of action I'm to take? Using an X10a locked to Rogers Wireless. Thanks for your time
Click to expand...
Click to collapse
i think you need to be rooted to u that launcher...
You could try using Omnius to reset the gesture lock, that may give you abit more time??
Had the EXACT same problem just yesterday with Helix. Helix crashed on boot, unable to do anything with it, etc. Rogers, too. Couldn't boot into safe mode at all.
I used the Sony Ericsson PC Companion software and clicked the upgrade option. It gave me the option to repair. I selected repair and it told me to turn off the device, plug it into the computers USB port while holding the back button. That booted it into recovery mode and the software downloaded and installed the default ROM. That got me back up and running.
I did this from my Windows 7 partition and it worked fine.
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
I have an Acer Iconia Tab A500 which is on stock 4.0.3 OTA rom. It is rooted with blackthund3r's ICS root 7.1.1. After installing a font from "Custom Android Font Switcher" by Bentotbox, the tablet rebooted and got stuck with a blinking android loading screen after the Acer screen.
**** I need a way to reset the font back to default or to get this font to work. ****
I have tried to use the reset button, the power + volume up + toggle lockscreen switch, the power + volume down, connecting to the computer via mini usb and rerooting, and am now trying to download "Flashtool v0.9.0.0". I have no SD card, though I could buy one if absolutely necessary (trying to use the update.zip way) (I also have scoured google looking for update.zip, still no luck; link would be appreciated). I have no nandroid backup (it crashed every single time), however all apps, music, etc have been backed up to computer. As long as it works again, I'll be thankful.
I have Windows 7 without a command line, but administrator permissions.
AgentJones said:
I have an Acer Iconia Tab A500 which is on stock 4.0.3 OTA rom. It is rooted with blackthund3r's ICS root 7.1.1. After installing a font from "Custom Android Font Switcher" by Bentotbox, the tablet rebooted and got stuck with a blinking android loading screen after the Acer screen.
**** I need a way to reset the font back to default or to get this font to work. ****
I have tried to use the reset button, the power + volume up + toggle lockscreen switch, the power + volume down, connecting to the computer via mini usb and rerooting, and am now trying to download "Flashtool v0.9.0.0". I have no SD card, though I could buy one if absolutely necessary (trying to use the update.zip way) (I also have scoured google looking for update.zip, still no luck; link would be appreciated). I have no nandroid backup (it crashed every single time), however all apps, music, etc have been backed up to computer. As long as it works again, I'll be thankful.
I have Windows 7 without a command line, but administrator permissions.
Click to expand...
Click to collapse
yup ive had that app cause boot loops for me too i warned everyone in a commment? you have to flash a new rom the only way i got it to workwas doing all the wipes and flashing the sme rom although if its the same rom i dont think you would have to do all the wipes? im not sure
My lcd screen cracked last year, so i gave phone to local service and they repaired last week. I am trying to install a new rom for days but i cant manage.
I tried cm version13 and aurora, but my torch doesnot work. EVen in camera, in flash mode. Should i again open phone and look if there is a problem or it is about software?
And other question, i cant mount my internal sd card. WHen i open es file, it only shows /sdcard, and nothing more.
Now i opening storage, total space 1.40 gb, apps 32 mb, intrnal stroage 1.02 gb and i took of external to see. In file exploerer, again i can only see sd card0. I cant see my system or anything. 1-2 years ago i could see my system.And i connect to pc, there is only one parttion. 1-2 years ago there were 2, one of internal sd other one is phone memory.
Please help me to solve this. And i mneed a rom that is only fast and using battery nicely.
Why noone helps now i cant open phone. Swm 5.0.8 cant mount sdcar sdext and i formatted data so it cant opened. How can i fix that? I want to go back to stock rom to see if there is sd card is working and myt torch isworking.
You can mount phone on pink screen and add the latest recovery from there.
rqmok said:
You can mount phone on pink screen and add the latest recovery from there.
Click to expand...
Click to collapse
Thanks rqmok. You are a great helpful person. You are trying to help me for days.
I went into pink screen. It automatically went update (i had put dload to stockr room update ,). Then i tried to open but still rebooting without oğenning.
So i went into rewcovery but i saw that it is android recovery, not cwm i installed. So i tried a lot of tgihngs.Then i installed aurora v20, but ittis interesting, i opened phone after that insstallation. It shows 2.3.5 rom, stock rom original rom.
I did not understand that.
And my flash again doesnot work. Should i give this back to the repairman to solve?
PLease looık my pictures.
pic 1 shows my first original screen. It was cracked under door and there were a lot of scratchs on phone screen. When i opened phone ,i could see scracths. So i bought from eb ay and gave a repairer. He made it. I dont know if it was well.
Then i put my foot on it slowly, but it again cracked. But i could not see scratchs. When i opened the phone, i could only see light not scratchs. So igave to same repairer without buying a screen. Pic 2 shows my 2. screen that came from ebay, there are no sctracts.
Now , my flash is not working and torch. I tried in a lot of roms. IT is not about software i think. And i have to press a lot of times to enable phone.
What do you say about that?
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
rqmok said:
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
Click to expand...
Click to collapse
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Cursed Chico said:
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Click to expand...
Click to collapse
You can't view your sdcard files from pink screen.
If you are able to install a ROM and make it work then that will be good. But, you have said that this happened after replacing the screen. So, if you can open the phone and check for any disconnected cables that need to be reconnected then you should fix them. There should be a video on YouTube on how to do this. If you cannot do it then you will have to get it repaired.
I dont have screwdriver, i have 3mm, it doesnot work.
But after screen replacement, i used aurora for 7-8 days. Then i thought partition was wrong and deleted wiped. Now but i cant install a rom. İ nstall aurora but it opens 2.3.5 with pink screen.
What size screwdriver do i need?
Now in android recovery i wiped daya, wip cache and then restarted, then trierd to update on pink scrteen, it gave error. So again wiped datya. Now i could open it. it shows 2.3.5. İf i restart, it will be deleted again i guess. What should i do? Wİthout power off, update? I will try to install cwm
I tried to replace recoveryimg but i failed. Because ihad to install superuser, so it rebooted and phone again cant boot up, restarting a lot of times. I dont understand what the reason is
Again, i did revocery android, wipe data and cache , then rstarted. After a few boots, 2.3.5 opened. Then i again restarted and now it is trying to start again 10. times. I n my ext sd, there are dload and other zips, that can be reason? I dont want to delete those because if i delete, it will be hard for me to insatall those files
Now it is restarted, huaewi logo appears, then pink and colurful fireworkds, than black svcreen and contunes....
After wipping, i restart and it is fine, i could go into 2.3.5. But when i again restart, smetimes it again opens but as soon as desktop opening, it starts to begin,
android stops working
calendar stops working
a lot of windows. I click end activity but it repeats alot of times.
So, my original stcok is damaged or what?
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
rqmok said:
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
Click to expand...
Click to collapse
Not only apss, android system also huawei etc. I cant even click restart button to restart phone because of popups windows.
So when i click restart, sometimes it open 3. times but still apps closing, then restarting and cant show huawei logo. and botoing up in inifinite loop.
Stock partition, i will try but i wont be able to do it. I donthave cwm and in android recovery i t doesnot accept, cant mount sd card. I can only go into android recover, can only do wipe data cache, cant mount anything. Theen only can restart and sometimes i try to update in pink screen but failed in half of 1/2. So, how can i go to stock partition without restarting phone while open?
I think the 2.3.5 rom i downloaded (Portugal or Korean i dont remember) is can be damaged or wrong. But i think i cant change that too. I am locked.
What i should do, i dont know.
Still cant do. I go into android recovery, wipe data and then after 2-3 restart, it boots. Then if i restart, there are a lot of windows appear showingstop activities. So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. It could make updates. But after updates, again could not start. After loading huawei logo, it restarts.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart .
Please help.