Related
What can we do? I dont want to mess with anything again because i know if anything goes wrong i cant get in to download mode.. But i too want to flash the new roms and gps fixes. Is there anyway to make the hardware buttons unlocked?
Why not use adb? I used it and Odin for the first time two days ago flashing this new patch and it was quite simple. I, like you, have a hardware locked handset. Let's hope it didn't take you nearly the same two hours that it took me.
You can root using clockworks and run some of the patch through clockworks too. Try not to use odin unless you really know what you're doing. A lot have odin hang on them. Other than that, you can flash rom using clockworks.
Sent from my SGH-T959 using XDA App
jonathan3579 said:
Why not use adb? I used it and Odin for the first time two days ago flashing this new patch and it was quite simple. I, like you, have a hardware locked handset. Let's hope it didn't take you nearly the same two hours that it took me.
Click to expand...
Click to collapse
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
TWO HOURS! Lucky SOB, took me over 4 hours, but I was at work with nothing better to do then to play with it on and off, google some more, crawl xda, play some more....rinse repeat...
But I don't think there will be an official "fix" as in their eyes nothing is broken. It is as they intended. I'm not really sure if this move was by tmo or samsung, but regardless it's a PITA. I used ADB. The hardest part is getting the drivers in, after that it's easy cake walk thanks to the wealth of knowledge here at xda.
glensta said:
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
Click to expand...
Click to collapse
exactly my point. this is what happened to me. but think about this lets say i flash a rom right and you know how sometimes it hangs on the vibrant screen and just stays there. and in order to get it back i am going have to use odin. which i cant.......... so i think i wont mess with anything anymore. Rather just wait for official 2.2 ota update.
Chief Geek said:
TWO HOURS! Lucky SOB, took me over 4 hours, but I was at work with nothing better to do then to play with it on and off, google some more, crawl xda, play some more....rinse repeat...
But I don't think there will be an official "fix" as in their eyes nothing is broken. It is as they intended. I'm not really sure if this move was by tmo or samsung, but regardless it's a PITA. I used ADB. The hardest part is getting the drivers in, after that it's easy cake walk thanks to the wealth of knowledge here at xda.
Click to expand...
Click to collapse
Take it back and do a warranty exchange cause the buttons arent working correctly.
I've never tried it because I could never get Kies to connect to my phone, but isn't there a way to update firmware through Kies? I know the i9000 guys use Kies to upgrade, but I think that's only to get drivers and the updates though. I wish Samsung had a better interface than Odin to flash firmware. It's absolute garbage.
Hello, I am new to this android stuff but think I may have a problem and no hardware keys may come into play.
I rooted my phone for no other reason than to remove bloatware
I removed what I new was safe and left alot on the phone just because I was not sure what to remove
Phone was working great and had no problems
I decided I wanted to do a factory reset to remove all my apps and user data etc.....
I did do a titanium back up of my apps so I could easily resinstall if I wanted
I did the reset and now as soon as the phone boots I get TWLauncher force close and just about any other app that tries to load just continuose force close loop
I did not remove the original launcher so I am not sure why this is happening but I cant flash since I cant get into download mode and I cant use ADB since my phone wont let me put into debug what to do?????????????
glensta said:
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
Click to expand...
Click to collapse
This is how I got out of "phone to pc"
get into download mode (i went through it manually, as in plug in the phone, and pressing the volume buttons together at the same time)
Connected to ODIN, and by perfect accident, I clicked on "start" without placing ANY files in ANY spots.
This is what I thought "OMG $h!t" Well my phone was already bricked enough, so i just let it run its course through ODIN. My phone magically rebooted, and it booted into the ROM i had installed before I got the "phone to pc" problem.
Whats the disadvantage of having a hardware locked phone?
From what I'm reading i cant load custom roms? or can use Oden?
Also I just got mine and im sure its hardware locked but how can I tell
TIA
demo23019 said:
Whats the disadvantage of having a hardware locked phone?
From what I'm reading i cant load custom roms? or can use Oden?
Also I just got mine and im sure its hardware locked but how can I tell
TIA
Click to expand...
Click to collapse
The disadvantage is that it is harder (maybe impossible in some situations?) to get into the Download mode if something goes wrong during a ROM update. You can still load custom ROMS but if something goes wrong, you might not be able to get to Download mode to be able to fix it.
I had the phone ! PC screen on mine when I first tried to unsuccessfully flash Vibrant8. Luckily, my Vibrant doesn't seem to be hardware locked and I was able to get back into Download mode and re-flash it with Odin.
I'm able to access download mode with volume keys and i can access recovery mode so i guess im ok
also date on box is 8/27/10
How do you know whether you have a hardware locked Vibrant or not?
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
I trust what you're saying.. but is there any way to test that out without having an already bricked phone? I want to make sure I can recover my phone before flashing your Vibrant hybrid ROM. So after Step 6 do you get the download mode screen? Or does ODIN now show a COM port and it works, even without the little digger guy?
eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
First off, absolutely no disrespect Eugene, you are an amazing developer and a HUGE contribution to this forum, I personally love your work and have tried many of your ROM's (actually looking at switching up to your newest hybrid rom next), but there are most certainly some of these phones that are hardware locked to the point that you can not get in to download mode, regardless of what you do. The steps you posted definitely work for some, and for non-hardware locked phones, they work beautifully, however, there are some phones that no matter what you do, no matter what order you do it in, you will never get in to download mode short of using ADB. The good news is, the lockout was not intentional, and exchanging your hardware locked Vibrant will generally result in a non-hardware locked phone (from mine, and many other's personal experience).
johnny12times said:
First off, absolutely no disrespect Eugene, you are an amazing developer and a HUGE contribution to this forum, I personally love your work and have tried many of your ROM's (actually looking at switching up to your newest hybrid rom next), but there are most certainly some of these phones that are hardware locked to the point that you can not get in to download mode, regardless of what you do. The steps you posted definitely work for some, and for non-hardware locked phones, they work beautifully, however, there are some phones that no matter what you do, no matter what order you do it in, you will never get in to download mode short of using ADB. The good news is, the lockout was not intentional, and exchanging your hardware locked Vibrant will generally result in a non-hardware locked phone (from mine, and many other's personal experience).
Click to expand...
Click to collapse
Download Mode is controlled by SBL, so if they truly changed anything that would be the cause.
I would think you could target redbend to update the SBL or even boot.bin bml /stl location.. I've not tried this, nor do I need too.. Just tossing options out there for people to try & don't mind risking a brick..
If you can get the SBL / Boot.bin for the Stock to flash via redbend, then this will solve the HW locks.. Now, Regarding my Phone, I can still get into Download Mode however, only by doing the USB trick &/or ADB reboot download.
I can not get into recovery unless I use clockwork Manager or ADB into
By the way, this is not a Hardware Lock issue as the thread states.. Not being able to get into download Mode like described, is a zImage issue & not the SBL / BOOT.bin
just as a FYI.
~Eugene
Hello, I am new to this android stuff but think I may have a problem and no hardware keys may come into play.
I rooted my phone for no other reason than to remove bloatware
I removed what I new was safe and left alot on the phone just because I was not sure what to remove
Phone was working great and had no problems
I decided I wanted to do a factory reset to remove all my apps and user data etc.....
I did do a titanium back up of my apps so I could easily resinstall if I wanted
I did the reset and now as soon as the phone boots I get TWLauncher force close and just about any other app that tries to load just continuose force close loop
I did not remove the original launcher so I am not sure why this is happening but I cant flash since I cant get into download mode and I cant use ADB since my phone wont let me put into debug what to do?????????????
Click to expand...
Click to collapse
Its happening because you ran a full titanium backup including system data. Yeah, dont do that. Reflash, then reinstall user apps with data, and pick and choose the system ones that are obvious (mms, bluetooth settings, wireless settings, etc.) Then reboot for changes to take effect. When in doubt, dont restore.
Good luck. Although you won't need it if you do what I just told you.
Sent from my SGH-T959 using Tapatalk
Just to share...
eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
I had the phone!computer bricked Vibrant, and just got my replacement from Asurion (in fact, of the phones in front of me are from Asurion since my original got stolen 2days after it came out ).
On phone1: The original TMO date is 8/12/2010, while the Asurion date is 8/19/2010. Also the ID is GJ/HLP. This one was HW Locked.
On phone2: The original TMO date is 9/2/2010, while the Asurion date is 9/10/2010. Also the ID is SM/HLP. This one doesn't seem to be HW Loocked, I can get into recovery easily, DL Mode ... not so much . Booting with vol+&- gets me into recovery, but booting with just vol- does nothing ...
Any thoughts?
As i have too little posts, i cannot post to the appropriate thread. Hopefully someone who knows something of these devices sees this and can help...
Fiddled with my phone and tried to update to 7720 but updating failed and phone stuck totally in "LG" boot logo.
As a last resort, decided to upgrade the firmware to EUR Open. Everything goes quite smoothly until 100% when the app tries to reset and restart the phone. Phone gets stuck again in "LG" boot logo and after a while the upgrading app gives me a notice "errnum6 open port". Cannot avoid that no matter what i do.
Help, anyone?
First, make sure you're flashing to a compatible firmware (i.e., E900h firmware for an E900h device). If your EmergencyDownload mode is still functional, try flashing again, but from a different computer and using a different microUSB cable.
Thanks Arktronic. What should happen when the app resets the phone (in 100%)? Should the phone boot up normally or does it still need a lot of time to initialize?
tkay564 said:
Thanks Arktronic. What should happen when the app resets the phone (in 100%)? Should the phone boot up normally or does it still need a lot of time to initialize?
Click to expand...
Click to collapse
I don't know about your case but when I was upgrading from 7712 to 7720 the reboot stage took me over 10minutes to complete.
Yes, it might take up to 10 minutes to re-initialize. Much more than that probably means an actual brick.
Thanks for the tips. Nothing helped though and finally had to give up. Tried with two different firmwares (eur and german), computers and cables but phone could not boot up after reset. Well, you can't always win...
At least the phone starts in Emergency Download mode? (camera, volume down and then power)
My Telus Optimus 7 does this as well now. I had issues with it after restoring my NoDo backup from Mango RTM. It worked for a while, and started rebooting to a "storage card not working" error; I could usually reboot it and get it to work for a while, but at one point, no matter how many times I rebooted I could not get it to go past that message. Thought I'd flash the firmware using the instructions here, and I get exactly the same issues as tkay564. It seems like it flashes the Telus (Canada) ROM fine, until the reset phase, then it keeps rebooting the phone endlessly, never going past the LG logo. LGDP2 gives me the ErrNum6 error as well. I've tried with the Mexican ROM, did not work either.
The best I can do is reflash the phone as yes, the Emergency Download mode still works. Not that it's doing me much good.
Unfortunately, sending back the phone is going to be tricky, as I bought the phone second-hand...
---
*EDIT: I've also checked the logs for the LGDP2 tool after flashing; it also reports everything as normal until it tries restarting. I'm also pursuing RMA with LG, hopefully they'll take it.
the.rider1290 said:
At least the phone starts in Emergency Download mode? (camera, volume down and then power)
Click to expand...
Click to collapse
Yep it does (or did..) so pushing in a new firmware is not an issue. But getting it to boot up afterwards is..
it sounds like an hardware issue (me too I was able to flash fimrware but stuck on LG logo, they replaces the motherboard)
the.rider1290 said:
it sounds like an hardware issue (me too I was able to flash fimrware but stuck on LG logo, they replaces the motherboard)
Click to expand...
Click to collapse
Got it back today. Motherboard was replaced.
Nexus 7 (2012)
4.4.4 Stock
KTU84P
HW Version - ER3
Bootloader Version - 4.23
Locked Bootloader
Not Rooted
I have a Nexus 7 sitting in front of me that was dropped off by my aunt in hopes that I could repair it for her. It doesn't look too promising, but I thought I'd consult the mighty fine people here on XDA before I give her the bad news. Here's what she says happened. Yesterday, while preforming day to day activities on it (browsing internet, Skyping, Facebook, etc), the device completely froze. After holding down the Power Button and forcing it to shutdown, she booted it back up. Everything seemed to functioned properly for about 30s - 1min when, at that time, the device turned off and rebooted on its own. After booting back up, it started to repeat this cycle. Basically getting stuck in a bootloop. I personally have never witnessed a bootloop like this before, where the device successfully boots up completely into the OS before turning off and repeating. I'm more used to dealing with ones where it might go as far as the manufacturer logo and then repeats. So anway, as I stated, I only have a 30s - 1min window where I can make changes in order to troubleshoot. The first thing I figured I should do was to go into "About Device", turn Developer Mode on and get USB Debugging enabled. I was able to do this and used "adb devices" to confirm its connection to my computer before it looped again. After its next bootloop I headed back into settings because I wanted to take note of the Android version she was running. As I was navigating there, I noticed that the Developer Options were no longer active. Basically as if I hadn't enabled them yet. This made me start thinking that changes being made on the device weren't sticking. I decided to make a few visual changes to the home screen and see if they were still there after the next bootloop. I uninstalled an app, rearranged icon placement, and changed the wallpaper. Once it shutdown and booted back up again, everything was back to the way it was before the changes had been made. The app I had uninstalled was still there, the wallpaper reverted back, and the icons were back in their original location. At this point I decided to see if I could reboot into Safe Mode. Unfortunately, this doesn't work. I am able to get the reboot to Safe Mode confirmation box and tap "Ok" but it remains in Normal mode when it boots back up. I eventually tried to boot into recovery and preform a Factory Reset. I was able to get into recovery and reset the Nexus. Or so I thought. Instead of seeing a Device Setup screen after it wiped, like I assumed I would, it booted up and still had all the data on it. There were no errors during the wipe and it was confirmed with "Data wipe complete." afterwards.
I am absolutely lost. I've never dealt with such an unusual issue before. Especially with it not even reacting to a complete data wipe. So, just to recap . . . I only have 30s - 1min available to interact with the OS before it reboots itself, any changes made during that time don't stick, Device is successful booting into Stock Recovery, and I can successfully get a Fastboot connection when booting to the Bootloader.
Luckily she has come to terms that this might not get fixed and has decided to go a head an order a newer 2013 model. I'd still like to try any solutions that you all might have. Just in case there is a slight glimmer of hope.
Oh, and one last thing I should mention. I tried to see if I could get the bootloader unlocked but it didn't work. This is the first Nexus I've ever had in my possesion, so I'm not really familiar with the tools available for it. I found WugFresh's Root Toolkit and attempted to Unlock with it. The process seemed to go as it should and I didn't receive any errors on the tablet or in the software. However, in the end, it didn't make any changes to the bootloader.
same problem
I have the same problem as you.
Did you find a solution?
Can anybody help us?
Thanks.
I have a similar problem, but I think mine is related to the bootloader.
I'm stuck on 3.34 and that's where it fails ever time I try Wug's Nexus Tool Kit.
Have you tried Nexus Tool Kit yet?
eawooten said:
I have a similar problem, but I think mine is related to the bootloader.
I'm stuck on 3.34 and that's where it fails ever time I try Wug's Nexus Tool Kit.
Have you tried Nexus Tool Kit yet?
Click to expand...
Click to collapse
I have tried factory reset from recovery, no errors while wiping but when device restarts nothing has happened: I only have a 30s-1min of old system with all my data and apps or directly bootloop.
Also I have tried flash factory images with Nexus Tool Kit and directly from bootloader. No errors while flashing, apparently has flashed new image system. When device restarts nothing has happened: bootloop or my old system with data and apps for 30s before restart.
Myself and a few others are having the same problem... please keep us updated if you find anything out.
http://forum.xda-developers.com/showthread.php?t=2588911
I am in need of serious help! I dropped my phone off a 2nd story, smashed the screen completely. So I took my wife's old stylo 2 plus (exact same phone) stuck my Sim and SD into it, registered through metro pcs, and it worked great.
I did software update because I was really excited (my old stylo 2 was rooted and had many problems along with being unable to update android software).
Update took about an hour, then said failed. After that it has been unable to boot up. I tried recovery mode, it offers to factory reset. Again reboots and stuck at logo screen. Says error device is corrupt, cannot be trusted, will not boot. I press power it says press power again to boot anyway. Restarts and sticks at logo screen. Device is basically untouched. No oem unlock, no debugging, no developer options, nothing has been touched ever, the phone is 100% stock. I even did factory reset before I started using the phone.
Can someone please help me at the least flash trip so I can fix this??
I am not new to this, but has been 5 years since I flashed anything. The problem is, is that it's still locked, and can't boot up. The phones bricked and never been touched!
If I can get twrp flashed I can go from there, I need a way to unlock it, or flash without unlocking.
Please help me I need my phone for work. I'd rather not switch back to an old smashed screen
Cecil12 said:
I am in need of serious help! I dropped my phone off a 2nd story, smashed the screen completely. So I took my wife's old stylo 2 plus (exact same phone) stuck my Sim and SD into it, registered through metro pcs, and it worked great.
I did software update because I was really excited (my old stylo 2 was rooted and had many problems along with being unable to update android software).
Update took about an hour, then said failed. After that it has been unable to boot up. I tried recovery mode, it offers to factory reset. Again reboots and stuck at logo screen. Says error device is corrupt, cannot be trusted, will not boot. I press power it says press power again to boot anyway. Restarts and sticks at logo screen. Device is basically untouched. No oem unlock, no debugging, no developer options, nothing has been touched ever, the phone is 100% stock. I even did factory reset before I started using the phone.
Can someone please help me at the least flash trip so I can fix this??
I am not new to this, but has been 5 years since I flashed anything. The problem is, is that it's still locked, and can't boot up. The phones bricked and never been touched!
If I can get twrp flashed I can go from there, I need a way to unlock it, or flash without unlocking.
Please help me I need my phone for work. I'd rather not switch back to an old smashed screen
Click to expand...
Click to collapse
You need to download the kdz(device firmware) and flash it in download mode using lg up.
Sorry for the super long delay. I did what you said, and was able to use my phone again in no time. Thank you very much!
LG Stylo 2 Plus
Cecil12 said:
Sorry for the super long delay. I did what you said, and was able to use my phone again in no time. Thank you very much!
Click to expand...
Click to collapse
Hey would you be able to tell me which firmware worked or possibly even a link. I am having issues with getting one to work on the lg stylo 2 plus using lg up.
Ok so before I started writing this I had only one problem now I'm worried my problem has gone from bad to worse.
I updated my 6T to 10.3.2 from the latest Beta after the process it prompted for a restart, upon restarting it got stuck in the boot animation. I tried going into Recovery and Download mode unsuccessfully so I went through the forums a bit and saw that someone who had the same problem successfully entered Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on! :crying:
Has anyone experienced this or know how to fix this? Any help will be much appreciated. Tia!
theDUD3 said:
Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on!
Click to expand...
Click to collapse
These should be clarified:
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Turn the phone off, let it sit. Then try turn it back on. Any response?
try to shutdown phone ...hold vol+ and power button for like 15 sec and restart your phone if this didnt work then u can try MSM tool
Thanks guys, got it working using MSM Tool!
regarding oneplus 6 got stuck on logo screen and recovery mode not working
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
You are likely going to lose your data. Know that going in if its not already backed up.
If you have the fastboot menu you can use the fastboot roms.
Or my least favorite option or what I would try last, MSM Tool (Tmobile 6Ts use a different tool).
IMPORTANT if you want to try and recover and data off your phone first, go to fastboot, and try and "boot" the TWRP img (not the installed one, one from your PC using the fastboot command). If that works you might be able to recover data. If that does worm, try dirty flashing the last ROM you were running and see if it boots.
No worries!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
Hello, I am sorry to hear of you having this issue, I just went through 3 1/2 days (off and on) of recovering my T-Mobile OnePlus 6t which I found a way to get my unlock code within 2 weeks of having it, so I rooted it and put a custom kernel on it, stuck on 9.0 never let me update as I was not familiar with A/B partitioning, yet! The answers I saw to your questions were spot on, I just had a little to add to it and I'm sure I am not alone. Real quick let me list what has gone wrong on the rare occasion it hit the fan with the 6t...
- When I would accidentally and rarely let my battery die it seemed like it took forever to get it to reboot, I mean it sat on my desk of DOA devices for 2 weeks!
- It often seems like the buttons do not always respond properly and never have when I needed them to. Been through this before, I've bricked and unbricked and flashed and re-flashed and wiped all weekend and I like Android 10 and all but seems everything is different for every build, and everything seems to have to go in the right order with the exact right file or you wind up in a jam, period..
- That said, the previous person that answered your question has likely encountered similar, I've heard of right down to the buttons not physically working, but I have been a Smart Device Master III Technician for over 5 years, i know my buttons were not broken.
- Most likely culprit that I just handled and worked, i did have to use the MSM tool, several times - and re-unlock the BL, several times I would not even get the chance to get to fastboot, just a screen saying Build and Hardware not a match"" in yellow letters and it just bootlooped. No fastboot is no good, but when you said the tool would show some signs of working but then not, I have 2 solutions that I needed on diffrent occcasions.
1 - As mentioned fully try other USB cables, and ports, if you pull the usb-c out of the port and hold <power + vol up + vol down> eventually it will do something, very picky, sometimes gotta move your fingers to different spots on the buttons and also after 15-20sec let go of power and hit and hold it again... after a few seconds before it vibrates stick the cable in connected to your PC and the screen will be black (obv) but the msm tool will pick up on it. I know about the cables because I take good care of my phones and cables and charging ports, however on my final fix today it showed in msm tool it was connected but waiting for device.... Fed up i put the phone down and moved the usb cable a little bit and it picked up on it and did its thing! That part was just the cable, getting into qualcomm mode or w.e. is a bit tricky sometimes.
- Also someone said set it down for a while and come back to it.. THAT WORKS!! Let it fully charge and often just plugging in charger turns it on, bootloop soft brick or however have you, very simiilar to an Apple device and their DFU (don't f up mode cause screen is black..)
I hope that helps you get in touch with your family and friends.. Whatever you do, don't give up bc if you have not got it yet, you will! One other note, there are a few different msm tools available and they look the same some same size, but the one that supposed to work on my phone didn't and one that they say only a fool would attempt to try actually saved me, so if all else fails, use a different msm tool/usb cable and you will get it! I don't think I can post links yet I am on here very rarely, but plan on more! I have received so much help from XDA throughout the years on thousands of phones with just software issues alone, aas well as guides to my own phones. I would be honored to give back as I also have some extensive knowledge on many devices but I am a noob in comparison to many! Stay safe, good luck and please update and let us/ me know how it worked out for you. If i can help further I will, I have every firmware file for the OP6t, recovery, tools, software, this is not new to me but I feel your frustration!