Questions & Troubleshooting Here Please - Milestone 2 General

Hi All,
I recently noticed a trend where many users have started new threads asking questions. In the long run, this could cause unnecessary clutter, making searching the forum a pain. I have therefore taken the liberty of starting this thread for all those who have General Questions or need help Troubleshooting their Milestone 2 for certain problems
DO NOT START A THREAD UNNECESSARILY unless you cant find an answer in this thread.
To all those wanting to post questions, read through this thread throughly BEFORE you ask your question. I do hope all will cooperate.
Thanks

Hi,
what a wonderful idea. So I will start with the first question: in settings I set my display timeout time to 10mins. Also I have a custom ringtone on my sd card /ringones that is set as default. Now- everytime I reboot, those setting are getting reseted...means, display time-out is 15 secs and ringtone some crappy preinstalled tune...why is that?
I also have to say that I'm rooted and use the internal memory as flash storage...maybe unmounting and mounting this storage causes some problems...
Anyone?
Sent from my MotoA953 using XDA App

oTToToTenTanz said:
Hi,
what a wonderful idea. So I will start with the first question: in settings I set my display timeout time to 10mins. Also I have a custom ringtone on my sd card /ringones that is set as default. Now- everytime I reboot, those setting are getting reseted...means, display time-out is 15 secs and ringtone some crappy preinstalled tune...why is that?
I also have to say that I'm rooted and use the internal memory as flash storage...maybe unmounting and mounting this storage causes some problems...
Anyone?
Sent from my MotoA953 using XDA App
Click to expand...
Click to collapse
thanks
regarding your problem, you did say you think that using you internal storage as a flash memory might be the problem. have u tried reverting the internal memory back to its default purpose to see if the problem persists?

unable to flask using BRA sbf
i'm trying to flash to the brazilian sbf
but the start button on RSD is grayed out
i've uninstalled and reinstalled the moto drivers and RSD
restarted the computer a couple of times
but the start button is stilled grayed out >_<
the UK sbf file does not experience the same problem

unable to flash using BRA sbf
i'm trying to flash to the brazilian sbf
but the start button on RSD is grayed out
i've uninstalled and reinstalled the moto drivers and RSD
restarted the computer a couple of times
but the start button is stilled grayed out >_<
the UK sbf file does not experience the same problem

xOnerOs said:
i'm trying to flash to the brazilian sbf
but the start button on RSD is grayed out
i've uninstalled and reinstalled the moto drivers and RSD
restarted the computer a couple of times
but the start button is stilled grayed out >_<
the UK sbf file does not experience the same problem
Click to expand...
Click to collapse
http://death-force.com/w/tutorials:rsd_startbtn

thanks dead, right on the money!
i'll try this right away
i have re-downloaded the BRA sbf file
just in case it's a file issue

xOnerOs said:
thanks dead, right on the money!
i'll try this right away
i have re-downloaded the BRA sbf file
just in case it's a file issue
Click to expand...
Click to collapse
Give feedback when youre done?? , i wrote the tutorials for Beginners! They should understand it.. even if they do it for the first time

DeadSix17 said:
Give feedback when youre done?? , i wrote the tutorials for Beginners! They should understand it.. even if they do it for the first time
Click to expand...
Click to collapse
followed the steps but im getting "failed to flash 0x7100 phone connected"
i've tried a different usb port - no go
renamed the BRA sbf a couple of times - no go
what fixed it was running RSDLite in as administrator and/or
in windows xp compatibility mode...

xOnerOs said:
followed the steps but im getting "failed to flash 0x7100 phone connected"
i've tried a different usb port - no go
renamed the BRA sbf a couple of times - no go
what fixed it was running RSDLite in as administrator and/or
in windows xp compatibility mode...
Click to expand...
Click to collapse
Wait, i know why give me a min ill find it
I think its Admin permission fault, i never had that error, but according to forums, its that! are you sure youre admin?
Also did you use command line and that.. ?

yeah my account has admin rights
i think it is a windows 7 64bit issue with RSDLite

I got Windows7 Ultimate 64bit, im not running SDL.exe as Admin, and also used the command line way.

Milestone 2 calendar sync problem
Hello guys,
I'm experiencing a problem with my calendar. I have 2 calendars synced with 2 gmail accounts (work and private). When I add a new item and I fill in a random name (not a name from my contacts) in the field "Who", the new item disappears afters syncing with my account. This happens with both of the calendars. If I don't fill in this field everything works perfect and when I fill in a contact, it also works but the contact then receives an invitation.
Does anybody has the same problem?
Thanks

DeadSix17 said:
I got Windows7 Ultimate 64bit, im not running SDL.exe as Admin, and also used the command line way.
Click to expand...
Click to collapse
i dunno what else to say but it worked for me that way

No Brand Battery does not charge
Hi All,
I just unboxed my new Milestone 2. I have a couple of No Brand battery of my old Moto Dext.
When i'll try to use this nobrand battery on milestone, the battery icon have a question mark inside, and when i attach charger i got this message:
Battery is not valid and is not possible to charge. Please replace with a original Motorola battery. (Sorry for translation)
If i use an original battery all works. There is a way to use a NoBrand battery inside Milestone 2?
Thanks a lot.

marcolino7 said:
Hi All,
I just unboxed my new Milestone 2. I have a couple of No Brand battery of my old Moto Dext.
When i'll try to use this nobrand battery on milestone, the battery icon have a question mark inside, and when i attach charger i got this message:
Battery is not valid and is not possible to charge. Please replace with a original Motorola battery. (Sorry for translation)
If i use an original battery all works. There is a way to use a NoBrand battery inside Milestone 2?
Thanks a lot.
Click to expand...
Click to collapse
There is a thread in this forum regarding that.
Milestone 2 general>secondary battery. You will find your answer there
Sent from my MotoA953 using XDA App

Hi,
I just real tris topic and there is nit a real solution.
Dies annone solved this problem?
Thanks
Sent from my MotoA953 using Tapatalk

marcolino7 said:
Hi,
I just real tris topic and there is nit a real solution.
Dies annone solved this problem?
Click to expand...
Click to collapse
if you read through that thread, one of the concerns is that using a non original battery would cause a warning from your phone. this is mainly because many non original batteries are prone to leaks and power surges, which can be rather detrimental to your phones components. it is therefore advisable to use original
however, if you notice in that thread, there are several types of batteries of different powers used that did not bring up any exclamation or warning from the phones system. i reckon the only two solutions would be to either use an original battery by motorola or one of the OEM ones recommended that do not bring up the warnings

agent008my said:
if you read through that thread, one of the concerns is that using a non original battery would cause a warning from your phone. this is mainly because many non original batteries are prone to leaks and power surges, which can be rather detrimental to your phones components. it is therefore advisable to use original
however, if you notice in that thread, there are several types of batteries of different powers used that did not bring up any exclamation or warning from the phones system. i reckon the only two solutions would be to either use an original battery by motorola or one of the OEM ones recommended that do not bring up the warnings
Click to expand...
Click to collapse
Hi,
i know risk about using not original batteries. I have 2 no brand batteries took in a shop in London a years ago for my MotoDext (Cliq in US). They cost about 16£ eachone and still be good. I'm very disappointed about this motorola policy. I have to thgrash 2 good batteries and buy a new one. This is the main reason for my request.
Thanks

marcolino7 said:
Hi,
i know risk about using not original batteries. I have 2 no brand batteries took in a shop in London a years ago for my MotoDext (Cliq in US). They cost about 16£ eachone and still be good. I'm very disappointed about this motorola policy. I have to thgrash 2 good batteries and buy a new one. This is the main reason for my request.
Thanks
Click to expand...
Click to collapse
Oh alright. I suppose you dont have very much of a choice than to use those OEMs or the original one then
Sent from my MotoA953 using XDA App

Related

Help needed!

I have bought an Xperia X10 from Ebay and now get stuck on start screen shows me the start-up animation continous.What i can do my Pc sees my Xperia like Xperia X4 instead of X10 and doesn't find any driver.
Any help?
Thanks in advance!
Have you tried a reset?
u Sure its a original and not a chinese copy?
first off i find it interesting that you joined jan 2008 and THIS is your first post!
if you've been here since then you'd probably have noticed by now that most people include as much information as possible when posting if they want their question answered.
And.. not to mention you probably noticed each forum has subforums with different categories.. like the one for GENERAL? I don't see Android DEVELOPMENT having anything to do with your phone not starting.
let's start over.
A. what version of the phone did you buy? unlocked?
B. what carrier are you using it on?
C. is there a SIM or a microSD in the device when you are attempting to boot it up?
D. What version of windows are you trying to connect your device to?
we might have a better understanding of what's going on if you could answer these questions for us.
Killerskincanoe i use my acount only for tutorials,downloading applications and roms and till now i didn't have any problems with my phones.
I bought the phone from Ebay unlocked and i used with Vodafone but worked fine with Orange..etc.
My phone is Prototype Ap1 and my Pc sees it like Xperia X4 but the phone is 100% Xperia X10 because i used few weeks and everything worked right.
I tried to boot it up with/without sim or card and nothing changes.
I'm using Windows7 64.
Krabman i don't know the combinations of buttons to try an hard reset and i can't install the driver.
Sorry for my english.
Any help will be apreciated.
I would contact SE to get the button combo for the reset as its not in the manual which only shows the menu path. You did pull the battery and let it set for a few minutes before putting it back in right?
Hi. (Hai noroc.. )You can try the following. Go to the official sony ericsson website, and download UPDATE SERVICE. Start it, then follow these steps:
-Remove and re-insert the battery (make sure it's more than half)
-Press the back (<-) button while connecting the phone to your PC (keep pressing untill further notice)
-Usually after the phone has been correctly recognised, it will let you know.
Even if it's a prototype it should work and update the SW.
My only concern is.. How the hell did you manage to buy an acceptance unit online?!..
And more.. WHY did you get it? It's a known fact that prototypes are the most unstable..
Anyway.. if the update service doesn't work.. It's most probable that is a very early proto, or a chinese replica like reb0rn said.
any news on this problem i have a non proto that hangs on activating screen also
br
dj
I didn't resolved the problem.Still waiting!
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
any news on this problem i have a non proto that hangs on activating screen also
br
dj
Click to expand...
Click to collapse
this is bad, you have a commercial unit and u got stuck, how did you come accross with this mate?
Sent from my X10i using the XDA mobile application powered by Tapatalk

I think I finally fully bricked my D2.

I think I have finally, fully bricked my Droid 2.
A little background: This is my fifth one, mostly all for hardware issues stemming from poor craftsmanship in the refurbed phones. This one though, is gone as far as I can see it. I got this phone last week, and had waiting a week to make sure everything was fine. It was, so last night I rooted it and tried to put Epic 2.7 on it. It failed Epicly (no pun intented) and I was forced to do a full SBF on it. In the process, something got a hiccup and I was left with Droid 2 flashing "Service Required" and a RSD Lite telling me it had 100% successfully flashed. I tried once again to flash it using the SBF from a different source, and the battery died halfway through. The USB port won't even engage now so I can't charge my battery, even when it's off. When I try to turn it on, it says "Service Required" then below, it flashed "Battery Low, cannot run" or something to that effect. Well, can't flash it if I can't charge it, eh? I'm stuck in a catch-22 and I can't really see a way out.
I'm going to try my luck tomorrow and take it back to Verizon, claim it's their fault (my ERI reflash code was manually changed in one of my older phones I had received, so anything is possible now) and jump ship to a Galaxy or something non-HTC. In the mean time, is there anything I could try and do to remedy this?
Note: I didn't know where to put this, sorry if it's in the wrong section.
drburke said:
I think I have finally, fully bricked my Droid 2.
A little background: This is my fifth one, mostly all for hardware issues stemming from poor craftsmanship in the refurbed phones. This one though, is gone as far as I can see it. I got this phone last week, and had waiting a week to make sure everything was fine. It was, so last night I rooted it and tried to put Epic 2.7 on it. It failed Epicly (no pun intented) and I was forced to do a full SBF on it. In the process, something got a hiccup and I was left with Droid 2 flashing "Service Required" and a RSD Lite telling me it had 100% successfully flashed. I tried once again to flash it using the SBF from a different source, and the battery died halfway through. The USB port won't even engage now so I can't charge my battery, even when it's off. When I try to turn it on, it says "Service Required" then below, it flashed "Battery Low, cannot run" or something to that effect. Well, can't flash it if I can't charge it, eh? I'm stuck in a catch-22 and I can't really see a way out.
I'm going to try my luck tomorrow and take it back to Verizon, claim it's their fault (my ERI reflash code was manually changed in one of my older phones I had received, so anything is possible now) and jump ship to a Galaxy or something non-HTC. In the mean time, is there anything I could try and do to remedy this?
Note: I didn't know where to put this, sorry if it's in the wrong section.
Click to expand...
Click to collapse
This is the correct section And if your phone turns on at all, it's not bricked Your phone would need to be 100% gone to be bricked
Hmm. Perhaps the statement "My phone hates me and put me in a catch-22" is a better qualified statement then? haha.
drburke said:
Hmm. Perhaps the statement "My phone hates me and put me in a catch-22" is a better qualified statement then? haha.
Click to expand...
Click to collapse
Probably I was just trying to cheer you up
For you to be able to do anything if your battery is really dead you need to find away to charge it or get a charged battery to try to do another SBF. Make sure the SBF is the 2.3.20 verizon version (assuming you have the 2.3.2 update)because the 2.2.0 version won't load on your updated D2. If you aren't succeding in windows there is a linux method that anybody can try via my ubuntu livecd. I'll update this post with links when I get on my laptop.
Sent from my DROID2 using XDA App
Reboot into recovery.you should see the ! Android. Press the search button on the keyboard. Scroll down to wipe data with the arrow keys and press ok. Delete to go back to the main screen. Then go to reboot and hit ok.
Sent from my DROID2 using XDA App
This happened to me as well. You need to find another battery to use or buy a 3rd party external charger.
The phone will only charge the battery when software is installed. The phone is nowhere near bricked but you do need a full battery to SBF back to a workable state.
I don't think Epic 2.7 should be used on updated D2's because I don't think the ROM is compatible with the updated version. I could be wrong though.
I seem to remember an editor at engadget or bgr had this problem on an original droid? I think they made some Frankenstein charger with a jumper or something and got it to charge so they could fix their software. They wrote an article about it.

[Q] My screen just froze on the lock screen. HELP!

My DX lock screen just froze, I can't get it to do anything; it won't turn off...nothing happens when I hit any of the buttons. I downloaded Liberty 1.0 a couple of days ago. Does any know what to do??
wtivey said:
My DX lock screen just froze, I can't get it to do anything; it won't turn off...nothing happens when I hit any of the buttons. I downloaded Liberty 1.0 a couple of days ago. Does any know what to do??
Click to expand...
Click to collapse
Have you tried to pull the battery? I can't help you about what caused the error, but that should at least reboot the phone.
nvm, i just figured out how to take the battery out. problem solved
yeah I took it out and it worked...i didn't know i could pull the battery but I figured out how to do it
yeah, it's the simplest solution to problems like that. Just be careful not to do that while flashing roms. Even if the rom seems to be stuck. It's best to wait at least 15-30 mins.
What do you mean "flashing ROM?"
The term flashing is basically installing a new rom onto the phone.
I'm use to the computer terms where cmos bios chips were fproms and installing new firmware was called "Flashing"
Just be very careful with your phone. The terms that describe specific actions are golden on these types of forums. If you don't understand the terminology, please double check everything before you proceed with changing things on your phone. I know it is a fun world to play in, but one bad move can ruin your device. I'm not trying to be mean or to discourage you, I just want to make sure you have a fun and safe time without having to reprogram everything because of one "minor" mistake. We all started where you are now, so we understand the mysterious world. Just stay safe out there, friend.
Sent from my DROIDX using XDA App

Info Notifications

Hi guys
I have a bit of a problem and maybe some of you can figure out whats wrong...
I have a bug on my phone that when is off the power still shows the charging icon (well its more like starts and then ends charging not always the charging icon).
The phone seems to be working well and i can't send it to repare... 1 month of waiting is a bit too much.
Now my real question is that on GB theres no intrusion on this but in the ICS its always showing a error message and i can't do a thing on the phone until i press ok.
Does anyone knows a way (by setings or by any program or even coding something) to remove this irritating notification?
Thanks and hope you guys give me ideas of how to fix this
See attachment to see the box...
Ahmun_Ra said:
Hi guys
I have a bit of a problem and maybe some of you can figure out whats wrong...
I have a bug on my phone that when is off the power still shows the charging icon (well its more like starts and then ends charging not always the charging icon).
The phone seems to be working well and i can't send it to repare... 1 month of waiting is a bit too much.
Now my real question is that on GB theres no intrusion on this but in the ICS its always showing a error message and i can't do a thing on the phone until i press ok.
Does anyone knows a way (by setings or by any program or even coding something) to remove this irritating notification?
Thanks and hope you guys give me ideas of how to fix this
See attachment to see the box...
Click to expand...
Click to collapse
It's annoying, I agree with you.
I suppose you have already asked people in your Rom thread for help? And no-one was able to provide any?
As a last resort, I'd go all the way back to rooted GB, then flashed LP1 Repack, then reflashed your current ICS Rom. It's a long way, but you're sure to get a clean start with no annoying notifications.
I'm not saying that you have to do it - that's just what I'd do.
Should you decide to follow this advice, this is how you can get back to GB safely:
http://forum.xda-developers.com/showpost.php?p=22758543&postcount=6
chasmodo said:
It's annoying, I agree with you.
I suppose you have already asked people in your Rom thread for help? And no-one was able to provide any?
As a last resort, I'd go all the way back to rooted GB, then flashed LP1 Repack, then reflashed your current ICS Rom. It's a long way, but you're sure to get a clean start with no annoying notifications.
I'm not saying that you have to do it - that's just what I'd do.
Should you decide to follow this advice, this is how you can get back to GB safely:
http://forum.xda-developers.com/showpost.php?p=22758543&postcount=6
Click to expand...
Click to collapse
Thanks for the quick reply but this is not a problem with bad ROM installation... What I wanted was a way to remove this notifications box in ICS, cause this problem I also have it in GB only in GB does not show up this stupid dialog box every 2 seconds...
Easy! Happened to me once!
Reboot in cwm and wipe: cache, dalvik cache, batterystats and reboot! Done!
This can happen when a new rom is installed.. so the batterystats becomes "corrupted" and starts to report wrong voltages and wrong temperatures.
I know the steps that i provided you will solve it!
Sent from my GT-N7000 using Tapatalk 2
Did it help?
zylor said:
Easy! Happened to me once!
Reboot in cwm and wipe: cache, dalvik cache, batterystats and reboot! Done!
This can happen when a new rom is installed.. so the batterystats becomes "corrupted" and starts to report wrong voltages and wrong temperatures.
I know the steps that i provided you will solve it!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hmmmm it also happened to you??? And when the phone was off and unplugged did it also show the charging symbol?
I thought it is hardware related cause it assumes its charging even when its unplugged and also when I reverted back to GB stock Rom and a costum Rom...
I'll go try it now and report if it helped.
Thanks a lot man, hope it will fix it...
If the above advice doesn't correct your problem, try cleaning the USB port and contacts CAREFULLY. You may have some debris shorting out your contacts.
Do a search. People were reporting similar problems several months ago.
Good Luck!
kraz
krazman325 said:
If the above advice doesn't correct your problem, try cleaning the USB port and contacts CAREFULLY. You may have some debris shorting out your contacts.
Do a search. People were reporting similar problems several months ago.
Good Luck!
kraz
Click to expand...
Click to collapse
That may be a solution... With what can I clean it? Alcohol it's good for that? I don't think that I have anything this small to fit it the usb port to clean it up... I'll manage something cause the earlier advise didn't seem to.help :S
Alcohol should work. But I would just try air first. That might clear out any "pocket dust" that may be in the port. Be careful...that port might be fragile!
krazman325 said:
Alcohol should work. But I would just try air first. That might clear out any "pocket dust" that may be in the port. Be careful...that port might be fragile!
Click to expand...
Click to collapse
As u sugested i've given a surch over the forum and i found that this is a too much normal issue to be let unknown to the responsables of Samsung not take care of this... I've seen different kind of work arounds since a replacement for the USB port (guess it's not's needed to replace the all mainboard to fix the USB port) to blow dry the phone. I'll try with a blow dryer but most of the users say that it didn't fixed it... Only opening the phone and cleaning it IP inside out. I'm not that at ease to opening my phone without breaking anything lololol so that i won't do, bit if USB ports are not to expensive and easy to install in a last resort i'll buy one and go see if there is a soul that knows how to do it
Thanks a lot for the help
I did replace my N900 micro USB port!
When i got my phone back it got a scratch in the screen! (not made by my friend)
Guess what?
The replacement of the micro usb port was made by a friend and the screen replacement was on Nokia and Nokia didn't saw it was opened by another person, and they said my warranty wasn't voided by anyone! (i didn't told them about the micro usb port of course)
But that's another story!
Hope you get it fixed!
Keep us updated

A3000 won't start or flash

This morning my A3000 started up then it shut down. Now when connected to a charger it only shows the LCD backlight no other operation. Tried to flash it but it won't stay on for more than 3 seconds, my XP laptop sees it then it disappears . Tried the reset button, tried disconnecting the battery for 10 minutes, next step is the hammer unless you can help it :fingers-crossed: only joking I would be lost without my A3000.
I know it's really annoying in such posts to say "Same problem here"..
but there is nothing I can do about it, I really have the same problem...! :S
even more, ! don't have an NVram backup so I lost my chance for formatting..
faissl said:
I know it's really annoying in such posts to say "Same problem here"..
but there is nothing I can do about it, I really have the same problem...! :S
even more, ! don't have an NVram backup so I lost my chance for formatting..
Click to expand...
Click to collapse
Hi, I had an idea, I have checked the battery voltage which is reading 3.03v (should be 3.7v) and has very low current so I have ordered a new battery today. I am hoping it is just that it can't start due to lack of power.
RayA3000 said:
Hi, I had an idea, I have checked the battery voltage which is reading 3.03v (should be 3.7v) and has very low current so I have ordered a new battery today. I am hoping it is just that it can't start due to lack of power.
Click to expand...
Click to collapse
That will most likely work, I think mine would even be lower than that. but isn't there a way to charge it to that level?
Try to uninstall with wipe (ccleaner etc)+reboot & reinstall your driver from ur computer without connecting ur tab.
Then run spflashtool by download or upgrade mode (anyway which work) for a minute wait time.
The proper quick drivers & latest stock rom can be found at @azam436 thread on page 1-4, check it out.
If u ever flash stock rom by spflashtool, your nvram should be automatically backed up & will restored (cmiimw). Good luck.
*] front LED holographic keyboard >> another dream in android
will wait you @RayA3000
Adam Hui said:
Try to uninstall with wipe (ccleaner etc)+reboot & reinstall your driver from ur computer without connecting ur tab.
Then run spflashtool by download or upgrade mode (anyway which work) for a minute wait time.
The proper quick drivers & latest stock rom can be found at @azam436 thread on page 1-4, check it out.
If u ever flash stock rom by spflashtool, your nvram should be automatically backed up & will restored (cmiimw). Good luck.
*] front LED holographic keyboard >> another dream in android
Click to expand...
Click to collapse
All that has been tried of course, we are hardcore users
I tend to believe in @RayA3000 theory, waiting for his follow up about changing the battery, giving that my battery has gone really weak before the accident that I need to charge two times a day or just leave it connected to charger so I can be ready to go any time..
faissl said:
All that has been tried of course, we are hardcore users
I tend to believe in @RayA3000 theory, waiting for his follow up about changing the battery, giving that my battery has gone really weak before the accident that I need to charge two times a day or just leave it connected to charger so I can be ready to go any time..
Click to expand...
Click to collapse
EUREKA - my new battery arrived today and my A3000 started up as usual, I'm chuffed
I have worked with batteries for years (we do camera repairs) and have found some batteries can just loose the will to live, no current. At £17.00 it was a cheap fix.
RayA3000 said:
EUREKA - my new battery arrived today and my A3000 started up as usual, I'm chuffed
I have worked with batteries for years (we do camera repairs) and have found some batteries can just loose the will to live, no current. At £17.00 it was a cheap fix.
Click to expand...
Click to collapse
my tablet owes you his life
thanks on behave of +5 XDA members that passed the same terrible experience
let's just hope that file I found on spflashtools/backups/ was really my nvram :S

Categories

Resources