I am lost. I had flashed my HD2 with an Android Nand several months ago. I am wanting to upgrade and have forgotten how. I have read all of the guides and everything says I need to run daf but none of the downloads have that. Any advice? My phone is crappy windows at the moment.
I have downloaded many roms and none have daf.exe anymore OR ANY exe.
What am I missing?
1: Flash a 2.07.50.xx or higher radio (I suggest 3.15.50.14)
2: Flash MAGLDR 1.13 link is in my sig
3: Flash the correct size CWM for your ROM, check ROM thread for sugested recovery partition size. Use option #5 USB Flasher in MAGLDR to flash it (CWM link in my sig)
4: Download your ROM and put the zip file you download on the root of your SD card
5: Go to option #8 AD Recovery in MAGLDR to boot into CWM
6: Select install zip from sdcard then find your ROM on your SD card and install it
7: when ROM is finished installing press back button to get to main menu of CWM and select reboot
8: Let your ROM boot up and then reboot to get everything set good
9: enjoy
Click on my guide in my sig as it will help you out.
You rock! Thanks!
Related
Hi
I'm already install the Nexus android Nand on my HD2 T-Mobile using te special version of CWM 3.0.0.3
Now I need to try the Hyberdoid GBX, should I remove the 3.0.0.3 (and how??) to use the 150M version (V 1.3 I think) or I can use the CMW 3.0.0.3 to install the HyberdroidGBX
Thanks any way guys, U inspired me a lot
Call me stupid, but if it was me i'd:
1: Ask in the actual thread of the build
2: Follow the instructions how to install that build, written by the developer
or am i just stupid??
anyways.......step by step....just follow what dev has recomended.
Dunno bout you, but if an expert like the Dev has put a build together and he recomends..."install this"....."flash that" etc etc etc...then prob in best interests to do how he explains and install what he says is needed.
1. HyperDroid Installation
==========================
You should have at least MAGLDR 1.13 on device.
You should also have Clockworkmod (CWM) Recovery v1.3 by RaiderX303 installed.
Short version:
Install ROM from zip using CWM (Full Wipe Recommended if coming from another ROM)
Step by step version:
1. Boot into MAGLDR (Power On and HOLD the Power Button till MAGLDR options are shown)
2. Boot into AD SD or AD Recovery to enter CWM Recovery Mode
3. If coming from another ROM, do a Nandroid Backup (just to be sure)
4. Wipe data
5. Wipe cache
6. Wipe Dalvik Cache
7. Go to mounts and storage and mount sdcard
8. Copy the ZIP you downloaded to your sdcard and unmount
9. Select install zip from sdcard
10. Find the HyperDroidGingerbread.zip and install
11. Reboot and remove Phone from USB
12. After initial setup, reboot to get everything settled
13. Enjoy the Clean, Fast, Minimalist Gingerbread HyperDroid Goodness!
i can't install MAGLDR113_DAF.. any1 help pls??
closemyeyes said:
i can't install MAGLDR113_DAF.. any1 help pls??
Click to expand...
Click to collapse
dont use that, from bootloader screen (tricolor) use the ROMUpdateUtility.exe.
matthew33 said:
Call me stupid, but if it was me i'd:
1: Ask in the actual thread of the build
Click to expand...
Click to collapse
ur not of course
I cant ask in the actual thread of the build because I'm new member (less than 10 posts) and the nand development section restricted for me
this is the link of the build I already installed (I'm not even able to quote)
u notice that he said under installation :
Installations
===========
You should have at least MAGLDR 1.13 on device.
CWM (ClockworkMod) Recovery Version via SD card (Flash update.zip)
Installing the CWM_Recovery_for_NexusHD2 (135MB system and 2MB cache) to create a space-efficient NAND partition layout (via flash.cfg) designed specifically for NexusHD2 series is highly recommended if coming from another ROM.
now I'm going to install This Build
I'm asking if there is a problem if I use the same version of CWM or NOT
Thanks for help
can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how
You have to flash clockworkmod (short CWM).
With cwm you can flash zips to your nand and also make backups:
http://forum.xda-developers.com/showthread.php?t=987531
Code:
For MAGLDR 1.13, booting from NAND:
Download the file attached and named "magldr_recovery_3.0.2.5.zip"
Download a partition layout incl. recovery from [URL="http://forum.xda-developers.com/showthread.php?t=898913"]this thread[/URL] which fits your ROM you want to use best and unzip it into "C:\recovery" for example
Copy over "magldr_recovery.img" from inside the zip archive into this folder "C:\recovery", delete existing "recovery-raw.img" and rename "magldr_recovery_3.0.2.5.img" to "recovery-raw.img"
Flash the recovery and partition layout using "DAF.exe" as usual and described in the thread of raiderx or the ROM provider
Boot Recovery with menu point "8. AD Recovery"
You're done
Click to expand...
Click to collapse
fischerben said:
can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how
Click to expand...
Click to collapse
I take it u want to install TyphooN_CM7_v3.1.3 rom?...Then simply visit the ROM's thread for clear instructions on how to successfully flash it...Its quite straight-forward.
Clean Install MAGLDR:
1. Task 29 (Just for measure)
2. Flash Radio(2.15 Recommended if u haven't alrd done so)
3. MAGLDR 1.13
4. MAGLDR 130MB System/4MB Cache (ClockworkMod Recovery v3.0.2.4)
5. Install TyphooN CyanogenMod 7 .zip with CWM (boot in2 MAGLDR, select AD Recovery > Select Zip to install from SD card, Flash.)
i succeed install the rom. but now i am stuck on the Typhoon loading screen
fischerben said:
i succeed install the rom. but now i am stuck on the Typhoon loading screen
Click to expand...
Click to collapse
has it something to do with my kernel?
fischerben said:
has it something to do with my kernel?
Click to expand...
Click to collapse
You might have done something wrong along the way...Wat steps did take to flash the ROM? ...d kernel included in the ROM usually doesn't give problems as its been tested before release...did u flash another?
Yes i flashed hyperdroid and it worked, so i don't understand why it's getting stuck on boot with typhoon
Try the steps mentioned above by " voncrane " , make sure u do a task29 before everything and when u enter the recovery wipe full data / it should work if u follow the steps .
help
i cant find where the link to download typoon mod 7
Needless to say: I'm a noob. Well, I've installed a rom via the newb-tread with magldr about a year ago. Now I'm trying to install a new rom. But, I've updatet magldr from 1.11 to 1.13, and entered the usb flasher mode in the magldr boot menu. The next step was to open the run daf.exe-file or install.exe. But I couldn't fint such a file in any of the two roms I've downloaded. There are some folders with a bunch of different files in them when I unpack the rom I've downloaded.
The rom I want is: [03.SEP.11][MAG/cLK] TyphooN CyanogenMod 7 Nightly v3.6.3 [2.3.5][A2SD][tytung r12b1]
http://forum.xda-developers.com/showthread.php?t=933951
Would be happy if you sent me a message in pm to help me. Sorry for bad english
new roms are not flashed by daf.you just put rom.zip to sd,then make cwm partition (for this rom 5-150-5)
download this:http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13157832492871
unrar,in mgldr choose usb flasher, see usb flasher....usb,then right click on daf,after installation is complete phone will reboot and turn to mgldr menu (giving an error),then in mgldr go to ad recovery-install zip from sd-choose zip from sd-find your rom.zip,after installation is complet reboot.
please i need a perfect ROM to upgrad my phone.
here is my phone infio:
PB81100
SPL-1.42
also if i can get any magical hints on how to get HSPL to install on spl 1.42?
tr3pplea said:
also if i can get any magical hints on how to get HSPL to install on spl 1.42?
Click to expand...
Click to collapse
hmm, magic, , ,
phone into bootlaoder
connect to usb
run hspl 2
select desired spl/hspl (i'm guessing you wanna go to android, so choose 2.08.hspl)
click start or go or whatever teh button says
abaracadabara
hspl.
update failed
I have been able to upgrade the phone from SPL-2.0.8 I followed the bellow steps but it got to point and show " UPDATE TERMINATE UPADATE FAILED"
.Copy leoimg.nbh to SD card storage.
14.Disconnect USB cable from phone.
15.Open ‘File Explorer’.
16.Go to ‘Storage Card’.
17.Confirm that leoimg.nbh is in SD card root level.
18.Power off your phone.
19.Press volume down button (don’t let go) and power on your phone.
20.It will load into bootloader.
21.You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
22.Let go volume down button when you see ‘loading…’.
23.Then ROM upgrade screen will be loaded.
24.Press power button to start update the ROM.
25.ROM update process will take around 15 minutes.
Gosh, you're doing it in such a complicated way. I'll give you a simple idiot proof guide. (Android guide, as wp7 is too easy)
1. Flash the correct hspl and radio according to what the rom thread says, download links of these should be provided on rom thread.
2. Install MAGLDR (So much easier to use than CLK) From here
3. Install Clockwork mod recovery, from here
Although before flashing go onto the android rom thead that you wish you flash and on there you will see the recomended system and cache sizes. Once you unzip the clockwork download file, you should see a file called: Flash.cfg Open/edit this file and then enter the recommended files from the thread.
4. Then go onto the thread and download the nandroid rom you wish to flash.
5. Go onto MAGLDR and click on option mount storage and then mount SD card, then simply put the zip rom into the root of the sd card.
6. On Magldr select the option of Nand recovery.
7. Voila you're in Clockwork mod recovery, now clear system data, and clear cache. After that go onto additional options and clear the dalvik cache.
8.Next just simply follow the recovery steps and install zip from sd card and flash the rom.
9. Once flashed it should automatically reboot and select Nand as default boot, and load the android rom.
Simple.
Sent from my NexusHD2 using xda premium
Tenpin said:
5. Go to option 4 on MAGLDR and mount your sd card, then simply put the zip rom into the root of the sd card.
Click to expand...
Click to collapse
the magldr sd mount doesn't always work, sometimes corrupts larger files. Safer to use teh 'mounts and storage - mount sd card' option in cwm.
hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?
tsagas said:
hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?
Click to expand...
Click to collapse
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM
Have you Installed CWM recovery ?
Nigeldg said:
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM
Click to expand...
Click to collapse
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?
tsagas said:
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?
Click to expand...
Click to collapse
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version
tsagas said:
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version
Click to expand...
Click to collapse
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Dont worry man, once you install CWM, you will be able to install a NAND rom of your choice on the internal memory of your phone. The rom you install will have everything eg. kernels, scripts. Basically all you need to do is install CWM then install a rom of your choice. Here is a guide to do install clockworkmod(CWM)
http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
and here is how to install a rom using clockworkmod
1. turn off you phone
2. turn it on while keeping the power button pressed (dont let go until you see the MAGLDR menu)
3. Go to option 8 "AD recovery"
4. You will boot into clockworkmod
5. Go to mounts and storage
6. Mount the sd card(connect your phone to the pc via usb cable, and then select this option)
7. Place your downloaded rom .zip file on the sd card, root level
8. unmount your fone.
9. Go to "install zip from sd card option"
10. then select "choose zip from sd card"
11. Select the rom.
12. The rom will be installed on your fones internal memory.
13. When it is done, just reboot your phone.
14. ENJOY
NOTE: Remember to choose the correct partition size when selecting which clockworkmod to install. there are 150mb, 250mb and 400mb partitions available. The procedure to install them is the same.
Hope it helps.
any questions
Give me a thanks if you found this post useful
tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.
Nigeldg said:
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.
Click to expand...
Click to collapse
Installed CWM done everything right and i still got stuck on AD Recovery GO GO GO
http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money
tsagas said:
http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money
Click to expand...
Click to collapse
I genuinely cannot make it any simpler than this guide. When it says flash the correct partition size, use the HD2 NAND Toolkit to flash a 175mb partition.