Related
so i went through the instructions on instaklling the tranquility rom, well after installing all i got was the motorola boot, nothing else, so i restarted the phone after about 10 min, and still nothing, so i reboot into recovery, and wiped the phone, well its still only showing the motorola logo, any suggestions?
Same thing happend to me
Sent from my DROIDX using XDA App
oxidant11 said:
so i went through the instructions on instaklling the tranquility rom, well after installing all i got was the motorola boot, nothing else, so i restarted the phone after about 10 min, and still nothing, so i reboot into recovery, and wiped the phone, well its still only showing the motorola logo, any suggestions?
Click to expand...
Click to collapse
Boot into recovery and load one of your backups. If you don't have backups, then you just learned why you need them. Of course, there are people who have uploaded nandroid backups to this site and others, find one of them, move it to your sdcard, boot into recovery, and install it.
If all this fails, then just .sbf. It doesn't take forever, and you can make a nice clean stock 2.2 backup after you root and then upgrade.
What OS are you running? Have you tried to SBF your phone back to factory?
Im guessing its 2.2 only
Sent from my DROIDX using XDA App
Yeah i got it back by doing spf. And then reloaded a backup, but i could never get into clockwork, what do u do yo get into clockwork because the only recovery i was able to get into was the recovery that comes with the phone, just would like to know.
Sent from my DROIDX using XDA App
The same thing happened to me trying to update using the update.zip. Installs everything normally but when it comes to booting it simply stops at the motorola logo, then if you reboot it several times taking the battery out it boots into the system.
Doesn't sound like your rooted? Have to be rooted to use Clockwork.
If you are rooted might try reinstalling the Bootstrap Recovery.
Would definitely suggest doing an SBF on the phone. The guides here are a little unorganized, so I wrote up a nice one below. Includes everything including the SBF file needed for flashing.
http://destdroid.com/showthread.php?18-How-to-Flash-2.1-(SBF)
Need help! My phone was rooted using the Easy Root process, all was peachy until I decided to try the latest leak of 2.2. Didn't work, got stuck at the M logo and could only get the bootloader screen up. I thought it was bricked but after searching high and low through the blogosphere got to this post. Now I've done the sbf as suggested, but when I try to do the Easy Root again, nothing happens. Any suggestions? I would like to root again so I can access the backup from my sd card and get my phone back to where I had it b/f. HELP!
hello all, i recently installed clockwork3.0 to try out the cm7 rom and did so. afer that i wanted to go back to cm6 but decided to try out a custom baked modaco in between. I went no problems to the modaco vision rom and then tried to go back to the cm6 and thats where i ran into the problem. It seems as if though all i can flash and boot now is the modaco vision and desire roms. i try enomther and cm and after the flash and reboot im always stuck at the HTC boot screen which i know shouldnt be there and cant format boot in cwork3.0 without failure error. Even a nandroid back to cm6 wont work. Im assuming this has something to do with the modaco rom writing some apps to /system during install. If anyone can point out my error or explain why this could happen it would be greatly appreciated. Thanke, veritasaequita
You need to flash back to the old ClockworkMod Recovery using fastboot? You have done that haven't you? CWM Recovery 3 is only for 2.3 roms atm afaik.
Cool, thanks for the input bro. Yes I sure have. I did see in the dev forum a thread titled install cw3.0 easily from phone. Is it possible to go back to the old cw by way of using the phone also? Once again thanks for your help
Sent from my HTC Vision using XDA App
oh yeah, indeed you have hit upon something. Try installing ROM manager via the Market,... then use that to re-install the old recovery.
But if that fails,... then yes, you SHOULD be able to use a Terminal Emulator to flash without using fastboot commands.
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
i do not have an answer but this answers my question of whether I want to run manual nooter on my 1.3 or try cm7. the cm7 steps seems more intimidating
Well i tried several more times last night with no luck. Then i got brave and just wiped everything (data,system,cache,dalvick) then flashed cm7 and gapps straight from my cwm boot card. I somehow
Ended up with a fully functional nook. App market works. Rebooted several times to be sure. I even tried usb host with my homemade adapter. Mouse, keyboard, and sandisk cruzer all work splendidly thru a powered hub.
My only mistake was i cant find my backup of stock 1.3 rom. Is there one floating around?
Sent from my LG-VM670 using Tapatalk
If I'm understanding correctly, you're trying to go from CM to 1.3, correct?
From what you've described, I suspect Clockworkmod 3.0.2.8 is your problem. If you look carefully as you format /data in preparation for reloading the BN 1.3 firmware, I think you'll see that the format is actually failing. That version of CWM doesn't handle the partitions correctly.
You want 3.2.0.1. See the edits at the top of this thread: http://forum.xda-developers.com/showthread.php?t=987735
If you're already on CM7.1, you probably have the correct version of CWM installed. You can save yourself a step by formatting the /data and /system partitions using that, then continuing on with the rest of the procedure for restoring BN 1.3. I went through all this myself a few days ago while preparing to go to BN 1.4.1.
I forgot to mention in my last post that i realized i was using the wrong cwm image and i burned another card with cwm 3.2.01.
I was still getting a boot-loop so i wiped everything and went straight to cm7.
Sent from my LG-VM670 using Tapatalk
@bobstro
I didn't read your post correctly.
I had a stock nook that i want to install cm7 on. Not the other way around. I asked about a stock 1.3 file just in case i need to do a restore. The nook is done. Its running cm7 just fine and i have given it back to my friend.
I really need to get myself one :-(
I usually mess around with my sons but he's at his mothers for the weekend with it. After christmas im getting one. Dont know if it'll be a color or a nook tablet but im getting one for sure!
Sent from my LG-VM670 using Tapatalk
If you intended to install CM7 from beginning, then why you wasted time messing around with ManualNooter?
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
pdrift said:
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
Click to expand...
Click to collapse
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
pdrift said:
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I hope you do use Windows at some points.
Let's put it this way.
You bought a PC with Windows XP pre-installed, get home, you don't want XP, so you install Windows 7 on the PC. You just whack the XP.
Same theory applied here, B&N shipped their NC out with the original stock ROM, which is Froyo-based OS. You want to install CM7, which is Gingerbread-OS ROM. You just whack the stock and install CM7.
oh I get it know. so its pretty easy if you want to go straight to cm7 just wipe and flash.
After reading some posts from the nook tablet section, i guess i'm getting a nook color.
what a shame about the locked bootloader :-(
i didnt technically solve the boot loop issue, i just erased everything, but should I mark this as solved and if so how?
The current Nook Color bootloader is not locked. The Nook Tablet's is. I wouldn't necessarily rule anything out, though. The bootloader on the Motorola Droid 2 is also locked, and there's quite an active Cyanogenmod community around it. The only problem is that we're stuck with whatever kernels B&N release, so ICS may be a long way off. I suspect the NC will remain the tuner's machine of choice, but the performance on the NT is very nice. If you can live with a rooted B&N ROM, it's a nice device for now.
billingdl said:
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
Click to expand...
Click to collapse
No, it seems that some 1.3 based NC units will bootloop if 4.6.16 is used to root them. I'm not sure why. Even after repartitioning to original nook partition sizes, or using CWM 3.2.01 (which supports the new partitioning), it'll still bootloop if 4.6.16 is used. Might be because of the different kernal included, but I'm not knowledgeable enough to know for sure. They root fine with 4.5.18. Haven't tried one with the new 1.4.1 compatible nooters.
To the original poster;
I'm having the same problem here, installed 4.15 successfully, installed 4.16 and am getting stuck in boot loop at the rainbow nook color screen.
I'm not understanding the 8 boot fail procedure though. Is this when you let the boot loop run through 8 times or when you get to the point of when the boot loop starts, shut the NC off and power it back on?
Also, to install cm7, all you did was put it on your sd card, and installed it through cwm?
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
pdrift said:
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
Click to expand...
Click to collapse
Thank you good sir! I was stuck in boot loop forever and couldn't find a clean explanation of the 8 boot fail process. I always tried to turn it off when the rainbow nook color screen came up.
I got it reset, made a flashable CWM SD card with 3.2 and then flashed CM7 on there and it works great!!
That was very frustrating, thank you!
Dont mention it, Glad to here I was able to help you out. I felt the same way when I was in that situation. Lots of googling to get a clearer idea on what that 8 boot method entailed. CM7 really makes it feel like a totally different device.
To all the devs that work on these projects, thank you
sent from my OV CM7 IHO using tapatalk
ive recently purchased a nook color version 1.3 and did all the steps to build cm7 on sd ard inserted it into my nook it downloaded then rebot and seem to come up im cm7 but my touch screen isnt working any suggestions?
So I think I've royally F'd my DX. I was going to try rooting and flashing a new rom. I'm not a total noob (rooted gtab, nook color, Le Pan) but this is ****ing me up.
It was running 2.3.3 605 originally. I started out with just root, that seemed fine. I got superuser and busybox installed without a problem. I install clockwockmod and dx bootstrap. I was even able to get CWM 5.0.2 or whatever installed without any trouble like I had read.
I tried reading and following threads but I couldn't fallow on if I was missing steps. I have zero experience with rooting via scripts and I have no intention to learn and would rather go back to stock.
I immediately got problems with rebooting. It would not reboot via the power button. It would go to the Red M then just black screen. But it would boot just fine if I pulled out the battery and tried that way.
I did a factory reset thinking that would help, it didn't. I was still rooted but the problems got worse. Now I boot directly into CWM recovery and have to reboot from in there to get to the OS.
I read some more, thought I had figured more out. Installed Rom manger, installed Liberty3. I'm still booting straight into recovery but when I reboot from there I'm stuck at the spinning Liberty logo.
I need help, I've read and searched, if you want to be a **** have run. But I need my phone fixed. Hold my hand like I'm Hellen Keller and help please.
I would recommend reading the Droid X wiki at the Cyanogenmod website. I had some of the same issues until I followed the downgrade + root method and then installed ROM Manager and CM7 manually through recovery. Good luck!
Sent from my DROIDX using XDA App
Schwazilla said:
So I think I've royally F'd my DX. I was going to try rooting and flashing a new rom. I'm not a total noob (rooted gtab, nook color, Le Pan) but this is ****ing me up.
It was running 2.3.3 605 originally. I started out with just root, that seemed fine. I got superuser and busybox installed without a problem. I install clockwockmod and dx bootstrap. I was even able to get CWM 5.0.2 or whatever installed without any trouble like I had read.
I tried reading and following threads but I couldn't fallow on if I was missing steps. I have zero experience with rooting via scripts and I have no intention to learn and would rather go back to stock.
I immediately got problems with rebooting. It would not reboot via the power button. It would go to the Red M then just black screen. But it would boot just fine if I pulled out the battery and tried that way.
I did a factory reset thinking that would help, it didn't. I was still rooted but the problems got worse. Now I boot directly into CWM recovery and have to reboot from in there to get to the OS.
I read some more, thought I had figured more out. Installed Rom manger, installed Liberty3. I'm still booting straight into recovery but when I reboot from there I'm stuck at the spinning Liberty logo.
I need help, I've read and searched, if you want to be a **** have run. But I need my phone fixed. Hold my hand like I'm Hellen Keller and help please.
Click to expand...
Click to collapse
Don't use ROM manager and don't use dxbootstrap (unless you have usb debugging unchecked). I use d2 bootstrap always. And you will have the occasion of it going in to cwm when you boot phone back up. I dealt with it for while. And cwm should be 2502 or something like that when you're just rooted 605. Did you make a nandroid of your rooted 605 before you tried to flash liberty
? Hopefully you did. Go back to that. Then use d2 bootstrap to get in to recovery, wipe data, cache and dalvik, then select install ip from sd card, then choose zip, then scroll via volume down to the liberty file, select that and flash.
I used directions posted over at Androidforums.com under the All Things Root forum for the Dx. I had a couple of hiccups, but it was user error. I now have Liberty 3 running smoothly on my Dx. Check it out, including the guide and ROM lists.
HTH
chaz_
Schwazilla said:
So I think I've royally F'd my DX. I was going to try rooting and flashing a new rom. I'm not a total noob (rooted gtab, nook color, Le Pan) but this is ****ing me up.
It was running 2.3.3 605 originally. I started out with just root, that seemed fine. I got superuser and busybox installed without a problem. I install clockwockmod and dx bootstrap. I was even able to get CWM 5.0.2 or whatever installed without any trouble like I had read.
I tried reading and following threads but I couldn't fallow on if I was missing steps. I have zero experience with rooting via scripts and I have no intention to learn and would rather go back to stock.
I immediately got problems with rebooting. It would not reboot via the power button. It would go to the Red M then just black screen. But it would boot just fine if I pulled out the battery and tried that way.
I did a factory reset thinking that would help, it didn't. I was still rooted but the problems got worse. Now I boot directly into CWM recovery and have to reboot from in there to get to the OS.
I read some more, thought I had figured more out. Installed Rom manger, installed Liberty3. I'm still booting straight into recovery but when I reboot from there I'm stuck at the spinning Liberty logo.
I need help, I've read and searched, if you want to be a **** have run. But I need my phone fixed. Hold my hand like I'm Hellen Keller and help please.
Click to expand...
Click to collapse
Just re-flash ur phone dude. do you know how to do that? It's a pain in the butt. but it is always failsafe.
I have a Telus Fascinate SGH-T959D and have rooted it with one click.
I am having issues getting CWR to install. The phone is running 2.3.3 and wondering which CWR file I should install? Any links to the file and I guess I will have to do this through Odin.. correct?
I have found this file http://www.mediafire.com/?6x5utoca59et7o9 and wondering if it will work?
I'm also trying to figure this out. I rooted my girlfriend's phone months ago and spent hours on here and failed to make cwm recovery work
I did get a custom rom working but fast forward to day I did a data wipe and the phone boots to a black screen. The stock recovery is basically useless leaving Odin the only way to flash whi h I'm not really comfortable with from prior close calls with it.
I got my bricked fascinate fixed and restored to 2.2 using this
(docs.google.com/open?id=0B6hh_wIMLWMgZjcwMjc5ZmUtMTEwYS00YjMxLTkzNzMtY2E3Y2M2YTBkYWQx)
it should work for you guys
Thanks for the post but I haven't bricked the phone.
Mine is still working but I can't get CWM to work and thus I can't get a ICS rom loaded on it.
That is what I am asking for.
Any help would very much be appreciated.